What type of spectrum does this represent?

A. Absorption Spectrum
B. Continuous Spectrum
C. Emission Spectrum​

Answer:2.115 L

Explanation:

4.5 x .47 = 2.115 L

4.5 pints are approximately equal to 2.129292 liters. The answer closes to the result is 2.215 liters.

This question is concerned with conversion between pints and liters. 1 pint is equal to approximately 0.473176 liters. Therefore, to find out how many liters that 4.5 pints is equal to, we multiply 4.5 by 0.473176.

The calculation is as follows: 4.5 pints * 0.473176 liters/pint = 2.129292 liters

Considering the options that was given, the closest answer is 2.215 liters.

https://brainly.com/question/34235911

#SPJ3

Answer: The amount of heat absorbed for the reaction of 25 mL of 1.0 M H₂SO4 and 50 mL of 1.0 M NaOH, resulting in a temperature increase from 25°C to 33.9°C, is 10.14 kJ.

Explanation:

Answer:

many milliliters of 1.50 M HCl(aq) are required to react with 5.05 g Zn(s)?

volume: 16 mL

First, we need to calculate the number of moles of Zn:

m(Zn) = 5.05 g

M(Zn) = 65.38 g/mol (molar mass of Zn)

n(Zn) = m(Zn) / M(Zn) = 5.05 g / 65.38 g/mol = 0.0773 mol

According to the balanced chemical equation, 1 mole of Zn reacts with 2 moles of HCl. Therefore, the number of moles of HCl needed is:

n(HCl) = 2 × n(Zn) = 2 × 0.0773 mol = 0.1546 mol

Now we can use the molarity of the HCl solution to calculate the volume needed:

M(HCl) = 1.50 mol/L

n(HCl) = V(HCl) × M(HCl)

V(HCl) = n(HCl) / M(HCl) = 0.1546 mol / 1.50 mol/L = 0.103 L = 103 mL

Therefore, we need 103 mL of 1.50 M HCl(aq) to react with 5.05 g Zn(s).

Absolute magnitude, on the other hand, is a measure of how bright a star would appear if it were located at a standard distance of 10 parsecs (32.6 light-years) away from Earth.

What is Magnitude?

Magnitude is a measure of the brightness of a celestial object, such as a star, planet, or galaxy. It is based on the amount of light that is emitted by the object and is typically expressed using a numerical scale. The lower the magnitude value, the brighter the object appears.

Apparent magnitude is a measure of how bright an object appears to an observer on Earth, while absolute magnitude is a measure of how bright an object would appear if it were located at a standard distance of 10 parsecs (32.6 light-years) away from Earth.

Apparent magnitude is a measure of how bright a star appears to an observer on Earth. It is determined by the amount of light that reaches Earth from the star, as well as the distance between the star and Earth. As humans travel away from our solar system and to other solar systems, the distance between them and the stars will change, which will affect how bright the stars appear to the travelers. As they move closer to a star, its apparent magnitude will increase, and as they move away, its apparent magnitude will decrease.

Learn more about  Magnitude from given link

https://brainly.com/question/24468862

#SPJ1

The volume of the gas will be 560 mL when the pressure is reduced to 125.0 kPa, assuming the temperature remains constant.

Boyle's law simply states that "the volume of any given quantity of gas is inversely proportional to its pressure as long as temperature remains constant.

Boyle's law is expressed as;

P₁V₁ = P₂V₂

Where P₁ is Initial Pressure, V₁ is Initial volume, P₂ is Final Pressure and V₂ is Final volume.

Substituting the given values, we get:

P₁ = 350.0 kPa (initial pressure)

V₁ = 200 mL (initial volume)

P₂ = 125.0 kPa (final pressure)

V₂ = ?

Solving for V₂, we get:

V₂ = ( P₁ × V₁ ) / P₂

V₂ = (350.0 kPa × 200 mL) / 125.0 kPa

V₂ = 560 mL

Therefore, the final volume of the gas is  560 mL.

Learn more about Boyle's law here: brainly.com/question/1437490

#SPJ1

Answer: Solubility increases so more solute dissolves

Explanation:

The solubility is a measure of the concentration of the dissolved gas particles in the liquid and is a function of the gas pressure. As you increase the pressure of a gas, the collision frequency increases and thus the solubility goes up, as you decrease the pressure, the solubility goes down.

When a protonated epoxide is attacked by water, the nucleophile attacks from the "top" or "front" of the epoxide ring in an "S_N2" substitution nucleophilic bimolecular process.

A protonated epoxide is a molecule that contains an epoxide ring (a three-membered ring consisting of two carbon atoms and one oxygen atom) that has been protonated, or had a hydrogen ion (H+) added to it.

The protonation of an epoxide ring can occur in the presence of an acidic medium, such as a strong acid like sulfuric acid (H2SO4) or hydrochloric acid (HCl).

In acidic conditions, the lone pair of electrons on the oxygen atom of the epoxide ring can interact with the positively charged hydrogen ion, resulting in the formation of a protonated epoxide.

Learn more about protonated epoxide here : brainly.com/question/21329956

#SPJ1

Answer:

The density of an object is constant.

Density is a derived unit of measure.

The density of an object determines whether it will sink or float.

O:C:H ratio is 34.8/16/52.2/12/13/0/1 = 2.17/4.35/13/0 = 1:2/6. Hence, C2H6O is the empirical formula (option D).

Fuel cells may produce heat and energy from hydrogen. Although transportation and utilities are expanding businesses, fertilizer manufacturing and petroleum refining still use hydrogen most frequently today.

According to the 1992 Energy Policy Act, hydrogen qualifies as an alternative fuel. The ability of hydrogen to power fuel cell technology in zero-emission vehicles, the potential for home consumption, and the high efficiency and quick filling time of fuel cells all contribute to the interest in hydrogen as such an alternative transportation fuel.

To know more about Hydrogen visit:

https://brainly.com/question/28937951

#SPJ1

It is a synthetic statin, an dihydroxy monocarboxylic acids, a pyrimidine, a sulfonamide, and a monofluorobenzene. It shares a functional connection with hept-6-enoic acid.

20 mg of rosuvastatin are contained in each film-coated tablet (as rosuvastatin calcium). Each 20 mg tablet also includes 0.025 milligrammes Sunset yellow FCF, 0.029 mg Allura red AC, and 91.755 mg lactose monohydrate.

Yet, because cholesterol has a steroid nucleus, it will behave differently. Aldehyde, ketone, ether, and amide groups don't exist in cholesterol. It only possesses one hydroxyl group, which, like carbohydrates, contains the functional group alcohol.

To know more about dihydroxy visit:

https://brainly.com/question/29137002

#SPJ1

Answer:

d

Explanation:

Nitrogen is the limiting reactant.

42 g N2x (1mole N2/28 g N2) X (2 moles NH3/ 1mole N2) X (17 grams NH3/1mole NH3) = 51 g

13 g H2 x (1 mole H2/2 g H2) X (2 moles NH3/3moles H2) X (17 g NH3/1mole NH3) =73.66g

since 51 is smaller than 73.66 and it started with N2 that is why N2 is the limiting reactant)

Answer: C - The amount of gas

Explanation:

Answer:

To solve this problem, we can use the Boyle's Law equation, which states that the pressure and volume of a gas are inversely proportional at constant temperature.

Boyle's Law: P1V1 = P2V2

where P1 and V1 are the initial pressure and volume, and P2 and V2 are the new pressure and volume.

Using the given values:

P1 = 30.0 atm

V1 = 2 L

P2 = 10.0 atm

Substituting these values into the Boyle's Law equation, we get:

30.0 atm x 2 L = 10.0 atm x V2

Simplifying and solving for V2, we get:

V2 = (30.0 atm x 2 L) / 10.0 atm

V2 = 6 L

Therefore, the new volume of the gas will be 6 L if the pressure is reduced to 10.0 atm, assuming the temperature remains constant.

I Hope This Helps!

The statement that "The volume of a gas sample mostly consists of empty space between the moving gas particles" is one of the assumptions of the Kinetic Molecular Theory regarding gases.

What is Collision?

There are different types of collisions, depending on the nature of the objects involved, the speed and direction of their motion, and the type of contact that occurs. For example, elastic collisions are those in which the total kinetic energy of the colliding objects is conserved, meaning that no energy is lost or gained during the collision. In contrast, inelastic collisions are those in which some of the kinetic energy is transformed into other forms of energy, such as heat or sound.

The Kinetic Molecular Theory is a model that describes the behavior of gases. One of the main assumptions of this theory is that gas particles are in constant random motion and move in a straight line until they collide with other particles or the walls of their container.

Another important assumption of this theory is that the volume of a gas sample mostly consists of empty space between the moving gas particles. This means that gas particles are assumed to be very small compared to the overall volume of the gas sample. Therefore, the particles do not occupy all of the available space in the container, but instead only occupy a small portion of it.

Learn more about Collision from given link

https://brainly.com/question/24915434

#SPJ1

The volume of the nitrogen oxide gas is 35.2 L

Stoichiometry is the quantitative study of reactants and products in a chemical reaction. It is used to determine the amount of reactants needed to produce a certain amount of product, or to determine the amount of product that will be produced from a given amount of reactant.

To apply stoichiometry;

We know that;

Number of moles of Cu = 150/ 63.5g/mol = 2.36 moles

If 3 moles of Cu produced 2 moles of NO

2.36 moles of Cu will produce 2.36 * 2/3

= 1.57 moles

If 1 moles of NO occupies 22.4 L

1.57 moles of NO will occupy 1.57 * 22.4/1

= 35.2 L

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

Answer:

Here are the chemical reactions for the formation of the respective Grignard reagents from the reaction of magnesium with the following organic halides:

Mg + CH3I → CH3MgI

Mg + C6H5Br → C6H5MgBr

Mg + C3H7Cl → C3H7MgCl

Grignard reagents are formed when magnesium metal is reacted with an alkyl halide. The magnesium metal reacts with the halide to form a magnesium halide salt, and the alkyl group is displaced from the halide to form the Grignard reagent.

The Grignard reagent is a powerful nucleophile and can be used to synthesize a variety of organic compounds.

Regardless of the reactant B concentration, the reactant rate remains constant. As a result, the response rate is unaffected by increasing B's concentration by a factor of four.

The amount of a substance's solute in a specific amount of solution is how concentrated it is. Molarity, or the amount of molecules of solute in one liter of solution, is a common unit of measurement for concentrations.

Focusing for an extended amount of time on one thing without interruption is meditation. Concentrating the mind on a specific object is the basic exercise of concentration that all meditations begin with. After some practice, concentration can eventually turn into meditation when the mind is calm and not easily diverted by other thoughts.

To know more about Concentration visit:

https://brainly.com/question/10725862

#SPJ1

Answer:

D

Explanation:

because replusive force is much more

Explanation:

Answer:

2300J

Explanation:

The first law of thermodynamics states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:

ΔU = Q - W

Where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.

In this case, ΔU is what we want to find, Q is 700 J, and W is -400 J (note that the work done by the system is negative because it is done on the surroundings). Substituting these values into the equation:

ΔU = Q - W

ΔU = 700 J - (-400 J)

ΔU = 700 J + 400 J

ΔU = 1100 J

The final internal energy of the system is therefore 1100 J + the initial energy of 1200 J, which equals 2300 J.

Answer:

The nuclide formed by the β decay of 26Al is 26Mg.


Mark my answer as brainliest! this was a difficult one

Answer:

4 millllllermeeters jb

One litre (L) of water (H2O) weighs 1,000 g and has a molar mass of 18 grammes (g). The term "mole" is frequently used to refer to a molecular weight. Hence, 55.6 moles more water are present in 1 litre of water.

How do you translate mass into moles using a formula. By dividing the number the molecules by Avogadro's number, one can determine the number of moles inside a given number of substance molecules. When dividing the mass even by formula mass given in g/mol, one can determine the number de moles in a given quantity of substance.

Using the periodic tables, we can calculate the atomic mass of a elements. We find that hydrogen has an atomic weight of 1, whereas that for oxygen is 16. To calculate the molecular weight of a single water molecule, we add the contributions from each atom, which equals 2(1) + 1(16) Or 18 gram/mole.

To know more about mass visit:

https://brainly.com/question/28180102

#SPJ1

40.5%

Explanation:

Ca×1 = 40

C×4 = 48

H×6 = 6

O×4 = 64

64÷158×100% = 40.5%

No, 28 moles of solid carbon would not be enough to produce 15 moles of [tex]C_2H_6[/tex] (Ethane).

This is because the reaction requires more than 1 mole of carbon to produce 1 mole of [tex]C_2H_6[/tex]. The mole ratio of [tex]C_2H_6[/tex]:C is 2:1, so 28 moles of carbon would only be enough to produce 14 moles of [tex]C_2H_6[/tex].A chemical compound having the molecular formula  [tex]C_2H_6[/tex], ethane is an organic substance. Ethane is an odourless, colourless gas at ordinary pressure and temperature. Ethane is separated from natural gas on an industrial scale, and it is produced as a by-product of the petrochemical process used to refine crude oil. Its primary usage is as a feedstock for the creation of ethylene.The ethane moiety is known as an ethyl group, and it can be used to create related compounds by swapping out a hydrogen atom for another functional group.

Learn more about ethane Refer:brainly.com/question/19128101

#SPJ1