what volume of a 0.45 m solution of hcl would just neutralize 210 ml of a solution containing 4.7 g of ba(oh)2 ?

Ions can conduct electricity during electrolysis because they are free to move and they are charged. Hence, the delocalization of ions and electrons conduct electricity.

Electrolytes are molten compounds or solution which can conduct electricity due to the presence of free ions in the solution. Neutral atoms when lose or gain electrons, they acquire a charge and become ions.

The mobility of charged particles causes the electrical current. Thus, ions and electrons in a solution which are free to move are conducting. In solid state, these ions are held by strong intermolecular forces.

Hence, they are not free to move in solid state. But in the molten state, they are free to move and conduct electricity.

Find more on electrolytes:

https://brainly.com/question/28699046

#SPJ1

The milliliters of the 0.650 M K₂CrO₄ are needed to precipitate  the silver in the 415 ml of 0.186 M AgNO₃ as  Ag₂CrO₄ is 58.4 mL.

The reaction is given as :

K₂CrO₄  +  2AgNO₃  --->  2KNO₃  +  Ag₂CrO₄

The molarity of AgNO₃  = 0.186 M

The volume of AgNO₃  = 415 mL

Moles = molarity × volume

          = 0.186 × 0.415

          = 0.077 mol

Moles of K₂CrO₄   = 0.077 / 2

                             = 0.038 mol

The volume of K₂CrO₄   = moles / molarity

                                       = 0.038 / 0.650

                                       = 0.0584 L

                                       = 58.4 mL

Thus the volume of K₂CrO₄ needed to precipitate all the silver is 58.4 mL .

To learn more about precipitate here

https://brainly.com/question/29114790

#SPJ4

Answer:

potassium (K) has (220 pm) while Sodium (Na) has (180 pm). The potassium atom has an extra electron shell compared to the sodium atom thus the potassium has a larger atomic radius.

a. In scientific notation, 48,000,000,000 g is written as 4.8 x 1010 g.

b. The scientific notation for 48 x 109 g is already there.

c. 4.8 x 10-9 g is how 48 x 10-10 g is written in scientific notation.

A number is expressed in scientific notation by a coefficient, which is a number between 1 and 10, multiplied by a power of 10. How many times the coefficient must be multiplied by 10 to obtain the original value is indicated by the exponent on the 10.

In case a, the exponent is 10, the coefficient is 4.8, and the result is 4.8 x 1010 = 48,000,000,000.

In case b, the exponent is nine and the coefficient is 48, hence 48 x 109 = 48 x 1000000000 = 48,000,000,000

In C, the exponent is -9 and the coefficient is 4.8, thus 48 x 10-10 = 48 x 0.0000000001 = 0.00000048 is the result.

learn more about scientific notation here:

https://brainly.com/question/19625319

#SPJ4

The Rank of  the diseases in order by number of deaths are:

Heart disease and cancer are the leading causes of death globally, with heart disease causing the most deaths each year. Heart disease can refer to a variety of conditions that affect the heart, such as coronary artery disease, heart failure, and hypertension. These conditions can be caused by a variety of factors, including genetics, lifestyle choices, and certain medical conditions.

Note that Cancer is a group of diseases characterized by the uncontrolled growth and spread of abnormal cells in the body. There are many different types of cancer, each with its own causes and risk factors. Some common types of cancer include lung cancer, breast cancer, and colon cancer.

Learn more about disease from

https://brainly.com/question/934133

#SPJ1

When a substance changes from a solid to a liquid, it is undergoing a process called melting. During this process, energy is added to the substance in the form of heat. This energy causes the bonds between the atoms or molecules in the solid to break, allowing them to move freely and take on the characteristics of a liquid.

We can understand by many ways such as when a substance changes from a liquid to a gas, it is undergoing a process called vaporization or boiling. During this process, energy is added to the substance in the form of heat. This energy causes the bonds between the atoms or molecules in the liquid to break, allowing them to move freely and take on the characteristics of a gas.

When a substance changes from a gas to a liquid or a solid, it is undergoing a process called condensation or solidification. During this process, energy is removed from the substance in the form of heat. This energy causes the atoms or molecules in the gas to lose their kinetic energy, slowing down their movement and allowing them to bind together, taking on the characteristics of a liquid or a solid.

Know more about the Phase transition in Chemistry:-

https://brainly.in/question/54123944

The Correct Question is:-

What will be the reaction when we change any substance from solid to liquid  gas?

Answer:single crystal surfaces

Explanation:

3. 10 x 1023 molecules of F2 have a mass in grammes of 1.178 x 1025. A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics,

It is possible to get the mass in grammes of 3.10 x 1023 molecules of F2 by applying the following formula:

Number of molecules times molar mass (in g/mol) equals mass (in grammes).

Since F2 has a molar mass of 38.00 g/mol, its mass in grammes is calculated as follows: mass = 3.10 x 1023 x 38.00 = 1.178 x 1025 grammes.

The amount of matter in a particle or object is represented by the dimensionless quantity mass (symbolised m). The kilogramme is the International System's (SI) preferred unit of mass (kg). mass. [ măs ] a measurement of how much matter is present in or makes up a physical body.

learn more about mass here:

https://brainly.com/question/19694949

#SPJ4

If 53 grams of magnesium oxide reacts with an excess amount of sodium chloride there would be  125.18 g magnesium chloride

The limiting reactant is magnesium oxide since NaCl is in excess, which MgO has a mass of 53.00 grams.

MgO  molar mass is  40.31 g/mol.

MgCl₂'s molar mass is95.211 g/mol

The equation with a balance reaction

2NaCl + MgO → Na2O + MgCl₂

We should determine the moles of MgO

Mass MgO divided by molar mass MgO yields moles of sodium chloride.

moles of MgO  = mass/ molar mass

moles of MgO = 53 grams / 40.31 g/mol

moles of MgO =  1.3148 moles

Calculate the moles of Na₂O

MgO is the limiting reactant.

To make 1 mol of Na₂O and 1 mol of MgCl₂ we need 2 moles of NaCl, we require 1 mol of MgO.

with unitary method we can calculate the moles of Na₂O

moles of MgCl₂ = 1/1 x moles of MgO

Moles of MgCl₂ = 1.3148 moles

Then calculate the mass of Na₂O

MgCl₂ molar mass is equal to its molecular weight times moles

mass MgCl₂  = 1.3148 moles* 95.211 g/mol. = 125.18 g

Learn more about mass at https://brainly.com/question/17018796

#SPJ4

The  two observations about temperature and salinity on the Caribbean and Pacific sides of Panama are:

Observation #1: The Caribbean side of Panama generally has higher temperatures than the Pacific side due to its location closer to the equator. The Caribbean coast of Panama is generally hotter and more humid than the Pacific side. Additionally, trade winds blowing from east to west across the Caribbean Sea can bring warm and humid air to the Caribbean coast of Panama.

Note that Observation #2: The Pacific side of Panama generally has higher salinity levels than the Caribbean side. This is because the Pacific Ocean is saltier than the Caribbean Sea, due to the fact that the Pacific Ocean has a larger surface area and receives less freshwater from rivers. Additionally, the Panama Canal, which connects the Pacific and Caribbean, allows for a mix of water between the two bodies of water, but the Pacific water is saltier and more dense and the effect of the canal is to reduce the salinity of the Caribbean.

Learn more about temperature from

https://brainly.com/question/4735135

#SPJ1

The best safety practice that is recommended before leaving the chemistry laboratory is that remove the lab coat,  the goggles and the gloves and wash the hands properly.

The  best safety practice that is recommended before leaving the chemistry laboratory are :

These are the some basic safety practices that is recommended to follow before leaving the chemistry laboratory. Wash the exposed areas. Most of chemicals are toxic , so clean it properly before leaving the lab.

This question is incomplete, the complete question is :

what is the best safety practice recommended before leaving the chemistry laboratory? group of answer choices :

1) remove lab coat

2)  remove goggles and the gloves

3) wash the hands properly.

4) none of the above

To learn more about chemistry laboratory here

https://brainly.com/question/28456399

#SPJ4

Answer:

sleeping

Explanation:

......hope this helps, :)

the rate constant increases because the reactions are faster. The alkali metals lithium, sodium, and potassium react violently with water, The reaction becomes more move from top to bottom down.

Due to its strong reactivity, potassium creates this gas the fastest, leading to the violent explosion. Because sodium and lithium have lesser reactivities than other elements (lithium being the lowest), their reactions aren't quite as explosive. Similarily, 53/20 x 250/1000 = 0.6625g of anhydrous sodium carbonate is needed to make a 250 ml solution of N/20. Therefore, 0.6625g of anhydrous sodium carbonate needs to be dissolved in 250 ml of distilled water to produce a N/20 solution.and potassium react violently with water, The reaction becomes more explosive as you move from top to bottom down.anhydrous sodium carbonate is needed to make a 250 ml solution of N/20. Therefore.

learn more about sodium  here:

https://brainly.com/question/29327783

#SPJ4

The initial concentration of A is 3.58 mol/L.

To calculate the initial concentration of A, we must first consider the rate equation for the reaction. The rate equation is given by:

Rate = k[A]

where k is the rate constant and [A] is the concentration of A. Rearranging the rate equation gives the following:

[A] = Rate/k

Therefore, we can calculate the initial concentration of A by substituting the rate constant and the concentration at t=5 seconds into the rate equation, giving us:

[A] = 0.291 s−1 / 0.081 mol/L

This gives us an initial concentration of A of 3.58 mol/L.

To learn more about concentration at

https://brainly.com/question/13872928?referrer=searchResults

#SPJ4

The density of isopropyl alcohol is 0.785 g/mL. 22volume, in milliliters, of isopropyl alcohol should be dispensed.

What is density ?

Mass per unit volume of a solid substance; density. Density is defined as d = M/V, where M stands for mass, and V for volume. The unit of density that is most frequently used is grams per cubic centimeter.

What is isopropyl alcohol?

Common names for isopropyl alcohol include "isopropanol," "n-propanol," and "dimethylcarbinol." It is a colorless, flammable liquid with the chemical formula C3H8O.

Therefore,  density of isopropyl alcohol is 0.785 g/mL. 22volume, in milliliters, of isopropyl alcohol should be dispensed.

Learn more about density from the given link.

https://brainly.com/question/1354972

#SPJ1

The fill in the blanks for the thermodynamic parameters is given as follows  :

a) Standard

b) atm

c) M

a) Thermodynamic parameters are the usually calculated for the compounds under the standard conditions.

b) Since the are values tend to vary somewhat with the conditions. To be in this state. A gas must have the pressure of 1 atm.

c) And a solution must have the concentration of the 1 M.

Some of the thermodynamic parameters are as follows :

To learn more about thermodynamic  here

https://brainly.com/question/29679879

#SPJ4

Eight electrons are the most that can fit into the third energy level. This is due to the Aufbau principle, which states that the third energy level, often known as the "n=3" level, can only store a maximum of 8 electrons.

According to the Aufbau principle, electrons first occupy orbitals with the lowest energies. Three subshells make up the third energy level: the 3s, 3p, and 3d. The 3s may carry two electrons, the 3p six, and the 3d ten; however, only eight electrons are present since the lowest energy subshell is filled first.Subatomic particles called electrons circle the atomic nucleus of an atom while having a negative charge. They are found in the electron cloud or electron shell, which is positioned outside the nucleus. The chemical characteristics of atoms and how they interact with other atoms are determined by the ratio of the number of protons in the nucleus to the number of electrons in an atom.Quantum mechanics is responsible for regulating the behavior of electrons in atoms.

learn more about  electrons here:

https://brainly.com/question/1255220

#SPJ4

The different types of the elements does she have available to study are :

Hydrogen, Phosphorus , Oxygen, Carbon, Magnesium, Sulphur, Potassium, Chlorine.

1) The chemical formula of the phosphoric acid is : H₃PO₄

Elements : Hydrogen, phosphorus, oxygen

2) The chemical formula of the glucose is : C₆H₁₂O₆

Elements : Carbon, Hydrogen, oxygen

3) The chemical formula of the Epsom salts  is : MgSO₄

Elements : Magnesium, Sulfur, Oxygen

4) The chemical formula of the chlorate of potash is : KClO₃

Elements : Potassium, Chlorine and Oxygen.

Thus, the Hydrogen, Phosphorus , Oxygen, Carbon, Magnesium, Sulphur, Potassium, Chlorine are the different elements to study.

To learn more about chemical formula here

https://brainly.com/question/8687828

#SPJ4

This fire pit would be 1.6 * 10³ years old, based on the supplied statement.

Metal smelting makes use of dirty carbon in the shape of coke made from coal and charcoal made from wood. It is crucial for the steel and iron industries in particular. Electric drive brushes, furnaces linings, etc pencils all make use of carbon. Processes for filtration and purification use chemical..

We must determine how long the charcoal sample has been deteriorating in order to determine its age:

[tex]$$\begin{gathered}t=\frac{1}{\lambda} \cdot \ln \left(\frac{R_0}{R}\right) \\\lambda=\frac{\ln 2}{T_{1 / 2}}\end{gathered}$$[/tex]

Combined we get.

[tex]$$t=\frac{5730 \text { year }}{\ln 2} \cdot \ln \left(\frac{\frac{15}{1}}{\frac{63}{5}}\right)$$[/tex]

Finally:

[tex]$$t=1.6 \cdot 10^3 \text { year }$$[/tex]

Result

[tex]$$t=1.6 \cdot 10^3 \text { years }$$[/tex]

To know more about carbon visit:

https://brainly.com/question/22530423

#SPJ4

We observe the same pattern as Ionic compounds are formed by electrically neutral cation-anion pairs. Ionic bonds hold together ionic compounds. They are named with the cation name first, then the anion name, with the word "ion" omitted.

The charge on cations is positive. They are made of metals on the periodic table's left side. The primary group of metals (Groups 1–8) form cations with a single, fixed charge. The charge corresponds to the periodic table's Group (column) number. After the element name, add the word "ion" to form the cation name.

Anions are charged negatively. They are composed of nonmetals, which are found on the periodic table's right side. Using the Octet Rule, the negative charge is found to be eight (8) minus the Group number. Anions have a single, fixed charge at all times. By changing the element name suffix to "-ide" and adding the word "ion" after the element name, the anion name is formed.

Learn more about Ionic compounds

https://brainly.com/question/17217225

#SPJ4

The difference be from the entering water temperature to the exiting water temperature in the water cooled condenser using the recirculating water loop is 10 °F.

When using the water-cooled condenser, the water should be constantly move over the condenser. For this process, the water should flow in and at the bottom of part and water should flow out at the top part.  A water-cooled condenser will lasts years longer, the maintenance is not neglected. water-cooled condenser has the higher heat transfer rate.

Thus, 10 °F is the difference be from the entering the water temperature to the exiting water temperature .

To learn more about water-cooled condenser here

https://brainly.com/question/28838296

#SPJ4

The number of neutrons possessed by beryllium with atomic mass is 9, and its atomic number is 4 is 5 neutrons.

A neutron is a subatomic particle with no charge that is a component of an atom's nucleus.

By deducting the number of protons or atomic number from the mass number, one can determine the number of neutrons that make up an atom of an element.

In other words, the number of neutrons equals the mass number minus the number of protons.

This suggests that the proton number or atomic number of beryllium is 4. An isotope of beryllium-9 has the following number of neutrons:

Neutron number = 9 - 4 = 5.

Because of this, an isotope of beryllium-9 has five neutrons.

Learn more about neutrons at: brainly.com/question/13131235

#SPJ4

While dissolving 92.0 grams of CH3CH2OH, ethanol, in 270. g of water.  7.41 mol/kg, is the molality of ethanol in the solution.

To determine the molality of ethanol in the solution, we need to first find the number of moles of ethanol and then divide that by the number of kg of water.

To find the moles of ethanol, we can use the formula:

Mass of ethanol divided by its molar mass yields moles of ethanol.

moles of ethanol = (92.0 g) / (46.07 g/mol) = 2.00 moles

To find the number of kg of water, we can convert the mass of water from grams to kg using the conversion factor 1 kg = 1000 g:

mass of water in kg = (270. g) / (1000 g/kg) = 0.270 kg

Now, we can calculate the molality of ethanol in the solution using the formula:

molality = 2.00 moles / 0.270 kg = 7.41 mol/kg

The molality of ethanol in the solution is 7.41 mol/kg.

To know more about molality please refer: https://brainly.com/question/26921570

#SPJ4

The salt that would lower the freezing point of water the most is sodium chloride.

Sodium chloride is the most effective salt at decreasing the freezing point of water. This is because sodium chloride has the highest solubility of all the salts, meaning that it can dissolve and form a solution with a higher concentration of solute. This leads to a decrease in the freezing point of water, as the solute molecules interfere with the structure of the water molecules and prevent them from forming an orderly pattern. Other salts, like potassium chloride, magnesium sulfate, and calcium chloride, may still lower the freezing point of water, but to a lesser degree compared to sodium chloride.

To know more about freezing point click below:

https://brainly.com/question/3121416#

#SPJ4

Calcium chloride is the salt which lower the freezing point of water the most.

The freezing point can be defined as the is the exact temperature at which a liquid becomes a solid. The freezing point of water is 32 degrees Fahrenheit. Freezing point describes the moment of transition much as the melting point captures the moment when ice turns from a solid to a liquid. Normal fresh water freezes at 32 degrees Fahrenheit and seawater freezes at about 28.4 degrees Fahrenheit because of the salt in it. Calcium chloride is highly soluble in water. It lowers the freezing point of water the most. Both calcium chloride and magnesium chloride have lower the freezing points. When calcium chloride comes in contact with ice, it rapidly lowers the freezing point of water and melts snow and ice quickly. Calcium chloride forms brine faster than other salts because of its hygroscopic properties.

To learn more about Freezing point please visit:

https://brainly.com/question/24314907

#SPJ4

The complete question is,

Assuming all the salts below are the same concentration, which salt would lower the freezing point of water the most?

(a) magnesium chloride

(b) calcium chloride

(c) sodium chloride

Based on the periodic table, the element that is most reactive is Na.

The correct option is A.

Reactivity is a gauge of an element's propensity to create compounds with other elements. While certain elements require energy to react and are inert, others will do so simply and spontaneously. Reactivity is a gauge of an element's propensity to create compounds with other elements.

Reactive elements are the Group 1 and Group 2 metals. Also, the Group 17 and Group 16 non-metals are reactive non-metals.

Group 1 and Group 2 metals form positive ions easily by electron loss. Group 17 and Group 16 non-metals form negative ions by electron gain.

Learn more about reactive elements at: https://brainly.com/question/25380167

#SPJ1

We may use the following conversion factor to convert toluene concentration from mg/kg to ppm: 1 mg/kg equals 1 ppm As a result, the toluene content in subsurface soil samples.

We must multiply the toluene concentration by a conversion factor in order to change it from mg/kg to ppm.

1 ppm is equal to 1 mg/kg * (106 g per kilogramme) / (93 g/mol)

The resulting value is 5 mg/kg * (106 g / 1 kg) / (93 g/mol) = 5 * (106) / 93 = 537,924.19 ppm.

As a result, there are 537,924.19 ppm of toluene in the soil samples.

To convert from mg/kg to ppm, multiply the concentration by the conversion factor (1,000,000 mg/kg).subsurface soil samples collected  after an underground storage tank was removed indicated the toluene concentration was 5 mg/kg. what is the toluene concentration in ppm {m}Toluene is a molecular weight of 92.14 g/mol chemical molecule.

learn more about  molecule here:

https://brainly.com/question/19922822

#SPJ4

The environmental impact of electric car batteries depends on the source of the electricity used to charge them and the method of disposal or recycling of the batteries.

If the electricity used to charge the batteries comes from renewable sources, the environmental impact is minimal. However, if the electricity comes from fossil fuels, the environmental impact can be significant. Additionally, proper disposal or recycling of batteries is important to minimize environmental impact. The environment refers to the natural surroundings and conditions in which people, animals, and plants live. It includes everything from the air we breathe, the water we drink, the land we live on, and the weather patterns that affect us.

Learn more about environmental impact here:

https://brainly.com/question/29638468

#SPJ4

The number of protons in an uncharged atom is always equal to the number of electrons in the atom.

One of the three fundamental elements that make up an atom is a proton. In the atom's nucleus, protons can be detected. At the heart of each atom, there is a small, dense zone.

Electrons are fundamental particles, not the smaller, more elementary particles that make up protons and neutrons. An electron has an electric charge of -1, which is equal to the electric charge of a proton but is the opposite of it. The location of electrons in an atom differs from that of protons and neutrons, which are found inside the nucleus. Since their electric charges are in opposition to one another, negative electrons are pulled to the positive nucleus.

Except for the majority of hydrogen atoms, the atomic nuclei of all elements contain neutrons. Unlike protons and electrons, which have charges, neutrons are electrically neutral; they have no charge.

To know more about atom from the link

brainly.com/question/17545314

#SPJ4