What would be the mass of an atom with 2 protons and 3 neutrons?​

Answer:

[tex]6.28\times 10^{-5}\ \text{T}[/tex]

[tex]1.92\times 10^{-6}\ \text{Nm}[/tex]

Explanation:

[tex]\mu_0[/tex] = Vacuum permeability = [tex]4\pi 10^{-7}\ \text{H/m}[/tex]

[tex]I_l[/tex] = Current in circular loop = 13 A

[tex]r_l[/tex] = Radius of circular loop = 13 cm

[tex]N[/tex] = Number of turns = 58

[tex]r_c[/tex] = Radius of coil = 0.94 cm

[tex]I_c[/tex] = Current in coil = 1.9 A

[tex]\theta[/tex] = Angle between loop and coil = [tex]90^{\circ}[/tex]

Magnitude of magnetic field in circular loop

[tex]B_l=\dfrac{\mu_0I_l}{2r_l}\\\Rightarrow B_l=\dfrac{4\pi 10^{-7}\times 13}{2\times 13\times 10^{-2}}\\\Rightarrow B_l=6.28\times 10^{-5}\ \text{T}[/tex]

The magnetic field produced by the loop at its center is [tex]6.28\times 10^{-5}\ \text{T}[/tex].

Torque is given by

[tex]\tau=\pi NI_cr_c^2B_l\sin\theta\\\Rightarrow \tau=\pi 58\times 1.9\times (0.94\times 10^{-2})^2\times 6.28\times 10^{-5}\sin90^{\circ}\\\Rightarrow \tau=1.92\times 10^{-6}\ \text{Nm}[/tex]

The torque on the coil due to the loop [tex]1.92\times 10^{-6}\ \text{Nm}[/tex].

Explanation:

Given that,

Mass of the particle, m = 4 kg

Speed of the particle, v = 2.5 m/s

The radius of the circle, r = 2 m

We need to find the angular momentum about the center of the circle. The formula for the angular momentum is given by :

[tex]L=mvr[/tex]

Substitute all the values,

[tex]L=4\times 2.5\times 2\\\\L=20\ kg{\cdot}m^2s[/tex]

So, the angular momentum of the particle is 20 kg-m² s.

Answer:

100 milliliters

Explanation:

Answer:

 v = 4.8 10⁻⁴ m / s

Explanation:

To solve this exercise we can use the concepts of energy. In this case the potential energy is transformed into kinetic energy

          U = K

          q V = ½ m v²

          v = [tex]\sqrt { \frac{2qV}{m} }[/tex]

in the exercise they indicate the value of the charge q₁ = 1 pC = 1 10⁻¹² C

let's calculate

          v = [tex]\sqrt{ \frac{2 \ 1 \ 10^{-12} 120 \ 10^3}{500 ^{2} }[/tex]

          v = 4.8 10⁻⁴ m / s

[tex] \Large {\underline { \sf {Required \; Solution :}}}[/tex]

We have ―

We've been asked to calculate acceleration.

[tex]\qquad \implies\boxed{\red{\sf{ a = \dfrac{v-u}{t} }}}\\[/tex]

[tex] \twoheadrightarrow \quad \sf {a = \dfrac{30-18}{3} \; ms^{-2} } \\ [/tex]

[tex] \twoheadrightarrow \quad \sf {a =\cancel{ \dfrac{12}{3} \; ms^{-2} }} \\ [/tex]

[tex]\twoheadrightarrow \quad \boxed{\red{\sf{ a = 4 \; ms^{-2} }}}\\[/tex]

Therefore, acceleration of the car is 4 m/s².

Answer:

C

Explanation:

if you measure your body's flexibility then you can keep track of how flexible you have gotten over time

Answer:

Instantaneous velocity  [tex]= 20[/tex] meter per second

Instantaneous acceleration  [tex]= 6[/tex] meter per second square

Explanation:

Given equation of distance X = [tex]2t+3t^2[/tex]

Instantaneous velocity [tex]= \frac{dX}{dt}[/tex]  [tex]= 2 + 6 t[/tex]

Substituting the value of t = 3 seconds, we get -

[tex]\frac{dX}{dt} = 2 + 6*3 = 20[/tex] meter per second

Instantaneous acceleration  [tex]= \frac{d^2X}{dt^2}[/tex]  [tex]= 6[/tex] meter per second square

Answer:

correct answer is C

Explanation:

In this exercise, you are asked to complete the sentences so that the sentence makes sense.

1) in projectile launching, the only force that acts is gravity in the vertical direction, so the time of going up is EQUAL to the time of going down

correct answer C

2) when a body falls freely, the acceleration is the ratio of gravity, therefore if it starts from rest, its height is

            y = v₀ t - ½ gt²

v₀ = 0

             y = -1/2 g t²

so the position is not proportional to the square of the time

correct answer is C

Answer:

Block of aluminum

Explanation:

The block of aluminum because of the conductivity, and is a metal, so it gets hotter faster

The temperature of wood and the aluminium will depend upon thier thermal coductivity.

The thermal conductivity of any material is defined as the amount of heat from a material can flow in a unit area per unit degree centigrade for a unit distance.

The thermal conductivity of wood is around 0.90 to 0.197 w/mk and that of aluminium is around 88 to 251 w/mk.

We can see that the aluminium block will absorb much amount of heat as compared to the wood block. Because the thermal conductivity of aluminium is much higher then the wood.

Hence temperature of wood and the aluminium will depend upon thier thermal coductivity.

To know more about Thermal conductivity follow

https://brainly.com/question/11213835

Answer:

A.

Explanation:

Some of these photons are absorbed by the atoms in the ground state and the photons are lost to the laser process. However, some photons cause stimulated emission in excited-state atoms, releasing another coherent photon. In effect, this results in optical amplification

cold, dry, and stable air masses .

Answer:

2000 N.

Explanation:

From the question given above, the following data were obtained:

Load (L) = 8000 N

Mechanical advantage (MA) = 4

Effort (E) =?

The mechanical advantage of a machine is simply defined as:

Mechanical advantage = Load / Effort

MA = L / E

With the above formula, we can obtain the effort used to raise the load of 8000 N as follow:

Load (L) = 8000 N

Mechanical advantage (MA) = 4

Effort (E) =?

MA = L / E

4 = 8000 / E

Cross multiply

4 × E = 8000

Divide both side by 4

E = 8000 / 4

E = 2000 N

Thus, the effort used to raised the load is 2000 N.