What would be the net force and in what direction for the motion to be? The first one* and explain

Answer: [tex]933.76\ rad[/tex]

Explanation:

Given

The initial rate of gyroscope is [tex]\omega_o=34\ rad/s[/tex]

Angular deceleration [tex]\alpha =0.619\ rad/s^2[/tex]

Using angular equation of motion

[tex]\Rightarrow \omega^2-\omega_o^2=2\alpha \theta[/tex]

Insert the values

[tex]\Rightarrow 0-34^2=2(-0.619)\theta \\\\\Rightarrow \theta =\dfrac{34^2}{2\times 0.619}\\\\\Rightarrow \theta =933.76\ rad[/tex]

Thus, the angular displacement is [tex]933.76\ rad[/tex]

Answer:

Orion Nebula & cone nebula

Explanation:

From the huge, youthful stars that are forming the nebula to the pillars of thick gas that could be the homes of burgeoning stars, the Orion Nebula is a picture book of star formation. The four heaviest stars in the nebula reside in the bright central field. Since the stars are arranged in a trapezoid shape, they are known as the Trapezium.

These stars' ultraviolet radiation is cutting a hole in the nebula and stars that are already young enough to have disks of material encircling them can be seen near the Trapezium stars. Protoplanetary disks, also known as (proplyds) are too small to be seen distinctly and the disks are the foundation of solar systems.

The Cone Nebula is a monstrous creation, which resembles a nightmare beast flaring up from a crimson sea, is simply a benevolent pillar of gas and ashes. The Cone Nebula is so identified because it has a conical appearance in ground-based photographs. This massive pillar is located in a tumultuous star-forming area with gnarled mountainpeak of cold gas and dust is visible.

Electricity is just the flow of electrons or charges from a point of production through a conductor, to another point where it can be utilized or converted to another form of energy.

Magnetism is the force exerted by magnets when they attract or repel each other. Magnetism is caused by the motion of electric charges from two or more magnetic substances.

Answer:

By Electricity.. We mean the Flow of electrical power or Charge.

While Magnetism is a phenomenon that occurs from or by the Motion of Charges

Answer:

[tex]2\:\mathrm{m/s^2}[/tex]

From Newton's 2nd Law, we have [tex]\Sigma F=ma[/tex]. Substituting given values, we have:

[tex]40=20a,\\a=\frac{40}{20}=\boxed{2\:\mathrm{m/s^2}}[/tex]

Answer:

s ಕಣಗಳು ಒಂದು ಮಧ್ಯಮ ಟ್ರೋಗ್ ಹಲೋ ನೀವು ಹೇಗಿದ್ದೀರಿ ಬಿಎನ್ ನಾನು ಹಾಡುಗಳಿಂದ ಸುಳ್ಳಲ್ಲ

Answer:

The answer is first one 1...

Answer:

The name of law is mass engery law

Answer:

0.75 m³/s

Explanation:

Applying,

Q = vA.................... Equation 1

Where Q = flow rate of the water, v = velocity of the water, A = area of the pipe.

From the question,

Given: v = 2.5 m/s, A = 0.3 m²

Substitute these values into equation 1

Q = 2.5(0.3)

Q = 0.75 m³/s

Hence the flow rate of water in the pipe is 0.75 m³/s

Answer:

That is equal to R1 + R2. If three or more unequal (or equal) resistors are connected in series then the equivalent resistance is: R1 + R2 + R3 +…, etc. One important point to remember about resistors in series networks to check that your maths is correct.

Answer:

The answer is "[tex]15.38\%[/tex]"

Explanation:

Background[tex]= 13 \ mv\\\\[/tex]

corrected signal[tex]= 91 \ mv-13\ mv= 78\ mv\\\\[/tex]

with attenuator[tex]=25\ mv-13\ mv= 12\ mv\\\\[/tex]

[tex]\to \frac{p_t}{p_i}=\frac{12}{78}\times 100= 15.38\%[/tex]

Answer:

a. hydroelectric power plant

Answer:

The index of refraction of the oil is 1.41.

Explanation:

We can find the index of refraction of the oil using Snell's law:

[tex] n_{1}sin(\theta) = n_{2}sin(\alpha) [/tex]

Where:

n₁: is the index of refraction of medium 1 (air) = 1.00

n₂: is the index of refraction of medium 2 (oil) =?

θ: is the angle between the light ray and the medium 1 = 61.0°

α: is the angle between the light ray and the medium 2 = 38.3°

Hence, the index of refraction of the oil is:

[tex] n_{2} = \frac{n_{1}sin(\theta)}{sin(\alpha)} = \frac{1.00*sin(61.0)}{sin(38.3)} = 1.41 [/tex]

Therefore, the index of refraction of the oil is 1.41.

I hope it helps you!                                      

Answer:

1.41

Explanation:

Answer:

10 degrees

Explanation:

I took the test :D

Answer:

to meet at a single point

(causing rays of light that are initially parallel to meet at a single point)

hope this helps:)

Explanation:

Answer:

focus

Explanation:

see more here

https://youtu.be/CJ6aB5ULqa0

Answer:

Cold

Explanation:

Im pretty sure im sorry if I am wrong

Answer:

Every electric circuit, regardless of where it is or how large or small it is, has four basic parts: an energy source (AC or DC), a conductor (wire), an electrical load (device), and at least one controller (switch). Visualize what happens when you switch on a room light.

Explanation:

Hope this helps you

Answer:

the simplest vacuum tube, the diode

Answer:

As the ball falls from C to E, potential energy is converted to kinetic energy. The velocity of the ball increases as it falls, which means that the ball attains its greatest velocity, and thus its greatest kinetic energy

Explanation:

Answer:As the ball falls from C to E, potential energy is converted to kinetic energy. The velocity of the ball increases as it falls, which means that the ball attains its greatest velocity, and thus its greatest kinetic energy

Explanation:

Answer:

The maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies 0.398 T/s.

Explanation:

Given;

radius of the circular loop, r = 2.0 m

maximum induced emf, E = 5.0 V

The emf induced in a magnetic field is given as;

[tex]emf = \frac{d\phi}{dt} \\\\\phi = AB\\\\emf = A\frac{dB}{dt} \\\\\frac{dB}{dt} = \frac{emf}{A} \\\\where;\\A \ is \ the \ area \ circular \ l00p = \pi r^2 = \pi (2)^2 = 4\pi \ m^2\\\\\frac{dB}{dt} = \frac{5}{4\pi} \\\\\frac{dB}{dt} = 0.398 \ T/s[/tex]

Therefore, the maximum rate at which the magnetic field strength is changing if the magnetic field is oriented perpendicular to the plane in which the loop lies 0.398 T/s.

Answer:

377 nm

Explanation:

Number of lines per meter is, [tex]N &=530 \times 1000 \\ &=530000 \text { lines } / \mathrm{m} \end{aligned}[/tex]

Grating element is, [tex]d=\frac{1}{N}[/tex]

[tex]=1.8868 \times 10^{-6} \mathrm{~m}[tex]

Order is, n=5

Condition for maximum intensity is, [tex]d \sin \theta=n \lambda[/tex]

 [tex]\lambda &=\frac{1.8868 \times 10^{-6}}{5(\sin 90)} \\ &=0.377 \times 10^{-6} \mathrm{~m} \\ &=377 \mathrm{~nm}[/tex]

Answer:

A. It must stay the same, but kinetic energy (KE) can be transformed to PE and PE can be transformed to KE within the system.

Explanation:

Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;

a. Potential energy (PE): it is an energy possessed by an object or body due to its position above the earth.

b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.

Furthermore, the total energy of a physical object or body is the sum of the potential energy and kinetic energy possessed by the object or body.

Mathematically, it is given by the formula;

Total energy = P.E + K.E

The Law of Conservation of Energy states that energy cannot be destroyed but can only be transformed or converted from one form to another.

In this scenario, a system has both potential energy (PE) and kinetic energy (KE).

According to the law of conservation of energy, we can infer or deduce that the total energy of the system must stay the same because it cannot be destroyed, but kinetic energy (KE) can be transformed to potential energy (PE) and potential energy (PE) can be transformed to kinetic energy (KE) within the system.

Answer:

They maintain stable concentrations

Explanation:

Just took the test.

The statement describes the molecules and a reaction once it reaches equilibrium: they maintain stable concentrations, which is option A as the When a chemical reaction reaches equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction.

Equilibrium is a dynamic state, meaning that the reaction is still ongoing but the rates of the forward and reverse reactions are equal. This means that molecules are still reacting with each other, but at a constant rate, so that the concentrations of the reactants and products remain stable. When a reaction is not at equilibrium, the concentrations of the reactants and products change as the reaction progresses. However, once equilibrium is reached, the concentrations of the reactants and products no longer change, but the individual molecules are still moving and reacting with each other.

Hence, The statement describes the molecules and a reaction once it reaches equilibrium: they maintain stable concentrations, which is an option. A 

Learn more about equilibrium here.

https://brainly.com/question/19324885

#SPJ5

Answer:

E = 124.7 N / C

Explanation:

Let's analyze the exercise: the microwave creates an electromagnetic wave of frequency F = 2.45 GHz, this wave is introduced into the microwave cavity and is reflected on the metal walls, which is why one or more standing waves are formed.

The electric field of the standing wave is

            I = E²

            E =√I

where I is the intensity of the radiation.

What is it

             I = P / A

where P is the effective emission power, almost all the power of the microwave and A is the area of ​​the cavity, in the most used microwaves

P = 700 W and the area is A = 25 x 18 cm² = 0.045 m²

             I = 700 / 0.045

             I = 15555.56 W/m²

let's calculate the electric field

            E = √15555.56

            E = 124.7 N / C

So they give us this

V=IR

V= 1.8

I=0.4

R=?

So we insert the thing that we know.

1.8=0.4*R

We need to leave our unknown value alone. So if our value of 0.4 is multiplying the unknown value it passes to the other side dividing.

So we have this.

Lastly we solve.

R=4.5ohms

The formula to find R is V=IR

V/I=R

So the resistance will be the Voltage divided by the Current

Answer:

d. conduction ​

Explanation:

Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.

In the process of heat conduction, thermal energy is usually transferred from fast moving particles to slow moving particles during the collision of these particles. Also, thermal energy is typically transferred between objects that has different degrees of temperature and materials (particles) that are directly in contact with each other but differ in their ability to accept or give up electrons.

Any material or object that allow the conduction (transfer) of electric charge or thermal energy is generally referred to as a conductor. Conductors include metal, steel, aluminum, copper, frying pan, pot, spoon etc.

In conclusion, conduction typically involves the transfer of heat energy by direct contact between two or more conductors such as a pot and electric cooker.

Answer:

d. conduction ​

Explanation:

Conduction is the transfer of energy from one molecule to another by direct contact.