Answer: as the number of predators increases, more prey are captured. as a result the prey population starts to decrease.
What makes up soil and where do these main components come
from? ASAP
Answer:
Soil is a mixture of minerals, dead and living organisms (organic materials), air, and water.
Explanation:
Dead organisms decompose(kind of like fertilizer)
water comes from nearby watersheds, precipitation processes, etc.
Answer:
Soil is made up of three main components – minerals that come from rocks below or nearby, organic matter which is the remains of plants and animals that use the soil, and the living organisms that reside in the soil. The proportion of each of these is important in determining the type of soil that is present.
A company that is concerned about the environment wants to encourage the use of their fuel cell cars, so they are putting
together information to help sell the cars. They want to be sure their material is accurate. Which piece of information is
true about fuel cell cars?
O Fuel cell cars are cheaper to buy. Fuel cell cars reduce use of non-renewable fossil fuels
Fuel cell cars are more powerful than gasoline-powered vehicles.
Fuel cell cars allow for the safe storage of hydrogen gas at filling stations.
Answer:
B. Fuel cell cars reduce use of non-renewable fossil fuels
Explanation:
What do you already know about the structure of a water molecule?
Answer:
The key to understanding water's chemical behavior is its molecular structure. A water molecule consists of two hydrogen atoms bonded to an oxygen atom, and its overall structure is bent. This is because the oxygen atom, in addition to forming bonds with the hydrogen atoms, also carries two pairs of unshared electrons
Explanation:
Hope it helps
during the combustion of methane (CH4), one mole of methane gas combines with two moles of oxygen gas (O2) to produce one mole of carbon dioxide gas (CO2) and two moles of water vapor. Which of the following chemical equations correctly represents the combustion of methane described above?
a)CH4(g) + 2O(g) ↔ CO2(g) + 2H2O(g)
b)CH4(g) + 2O(g) ↔ CO(g) + 2H2O(l)
c)CH4(g) + 2O2(g) ↔ CO2(g) + 2H2O(g)
d)CH4(g) + 2O2(g) ↔ CO(g) + 2H2O(l)
Answer:
a) cH4(g) +2O(g)__ CO2(g) +2H2O(g)
I hope this help
How many particles are in 5.00 grams of nitric acid?
Answer:
0.0500
Explanation:
If the energy of a photon of light is 3.37 x 10–19 J, what is the frequency of the light? A. 1.12 x 10–27 s –1 B. 8.90 x 1026 s –1 C. 5.09 x 1014 s –1 D. 6.70 x 10–44 s –1 E. 1.01 x 10–10 s –1
Answer:
The appropriate alternative is option C "[tex]5.09\times 10^{14} \ s[/tex]".
Explanation:
The given value is:
Energy of photon,
E = [tex]3.37\times 10^{-19} \ J[/tex]
As we know,
h = [tex]6.626\times 10^{-34} \ Js[/tex]
Now,
The frequency of the light will be:
⇒ [tex]E=hv[/tex]
On substituting the given values, we get
⇒ [tex]3.37\times 10^{-19}=6.626\times 10^{-34}\times v[/tex]
On solving, we get
⇒ [tex]v=5.09\times 10^{14} \ s[/tex]
If the energy of a photon of light is 3.37 x 10⁻¹⁹ J, then the frequency of the light is 5.09 x 10¹⁴ per sec.
How we calculate frequency?Frequency of light will be calculated by using the below formula:
E = hυ, where
E = energy of photon = 3.37 x 10⁻¹⁹ J
h = plank's constant = 6.626 × 10⁻³⁴ Js
Putting these values on the above equation and calculate for the frequency as:
υ = 3.37 x 10⁻¹⁹ J / 6.626 × 10⁻³⁴ Js = 5.09 x 10¹⁴ per sec
Hence, option (C) is correct i.e. 5.09 x 10¹⁴ per sec.
To know more about frequency, visit the below link:
https://brainly.com/question/254161
True or False: Different substances, like shortening and soap, will melt at the same temperature. True False
Answer:
false
Explanation:
different things will have different melting points
if you help me, you are the best
Answer:
The following numbers are true for protons:
2.
5.
7.
Explanation:
I know for a fact that Protons have a positive charge
they are located inside of the nucleus
Go.ogle says that they aren't involved in bonding
And it says that it has a mass of one
I hope this helps chu <3
What is correct about solubility of
substances?
Which element is the first element in group 13 of the periodic table of elements?
Answer:
Boron
Explanation:
Answer:
Boron
Explanation:
Boron is the first element of Group 13 and is the only metalloid of the group. Its chemical symbol is B, and it has an atomic number of 5. Boron has the electron configuration [He] 2s 2 2p 1 and prefers an oxidation state of +3. Boron has no natural elemental form; it forms compounds which are abundant in the Earth's crust.
PLSSS HELP
How is a balanced chemical reaction, like N2 +
3H2 --> 2NH3, similar to a recipe?
Answer: With each input, there is an output, a recipe requires certain ingredients, and certain amounts of each. A recipe calls for measurements, missing something can ruin it, just like a chemical formula, take something out or add something else, you get something completely different. when putting things together to make something you have to make sure what your putting in, will give you the product you want as the output.
Explanation:
A balloon takes up 625 L at 0°C. If it is heated to 80°C, what will its new volume be?
Answer:
Me gusta tu corte G
Explanation:
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
Humans and trees are interdependent - we breathe in oxygen and breathe out carbon dioxide, while trees take in carbon dioxide and release oxygen.
Humans have about a thousand genes similar to those of bacteria, presumably because the genes are so vital that their DNA structure has remained much the same over millions of years of descent from a common ancestor.
Explanation:
How are the four kinds of DNA nucleotides different from each other?
Answer:
The sugar in DNA is deoxyribose. ... Nucleotides in DNA contain four different nitrogenous bases: Thymine, Cytosine, Adenine, or Guanine. There are two groups of bases: Pyrimidines: Cytosine and Thymine each have a single six-member ring.
Adenine, Cytosine, Thymine, and Guanine are the four nucleotides that make up DNA. The four nucleotides have different base structures, but they are all composed of a nitrogenous base, a deoxyribose sugar, and a phosphate group.
What are nucleotides ?Nucleotides are organic compounds made up of a phosphate and a nucleoside. They function as monomeric units of the deoxyribonucleic acid and ribonucleic acid polymers, which are both crucial macromolecules for all kinds of life on Earth.
Adenine, Cytosine, Thymine, and Guanine are the four nucleotides that make up DNA. The four nucleotides have different base structures, but they are all composed of a nitrogenous base, a deoxyribose sugar, and a phosphate group.
The quantity of phosphate residues that a nucleotide has determined its name. Adenosine triphosphate, for instance, is the name of a nucleotide that consists of an adenine base and three phosphate residues (ATP). Adenosine diphosphate would be the nucleotide if it has two phosphates (ADP).
Thus, Adenine, Cytosine, Thymine, and Guanine are the four nucleotides that make up DNA.
To learn more about nucleotides, follow the link;
https://brainly.com/question/967810
#SPJ2
How do gut bacteria help people?(1 point)
A
by making enzymes to break down food
B
by causing a variety of digestive disorders
C
by releasing compounds that kill harmful bacteria
D
by training other bacteria to treat infection
Answer: the answer would be B
Calculate the reaction rate given the following:
After 2 minutes (120 seconds), the concentration of a product was measured to
increase from 0.0012 M to 1.48 M.
1.48 M/s
0.0123 M/s
0.0012 M/s
-0.0123 M/s
Answer:
0.0123 M/s
Explanation:
The reaction rate is the rate at which the reaction takes place and results in an increased concentration of the products. The rate of the reaction is 0.0123 M/s.
What is the reaction rate?
The reaction rate is the increase of the concentration of the product with respect to time in seconds. The rate of reaction is given by,
[tex]\rm rate = \rm \dfrac {\Delta C}{\Delta t}[/tex]
Given,
Change in product concentration = 1.478
Time period = 120 seconds
Substituting values in the above equation:
[tex]\begin{aligned} \rm rate &= \rm \dfrac {\Delta C}{\Delta t}\\\\& = \dfrac{1.478}{120}\\\\&= 0.0123 \end{aligned}[/tex]
Therefore, option B. 0.0123 M/s is the reaction rate.
Learn more about reaction rate here:
https://brainly.com/question/13440548
science question. Can you also tell me what weight has to do with the acceleration?
10 points
What is the molar mass of argon?
Answer:
39.948 u
Explanation:
WHAT IS THE CHEMICAL REACTION
Answer:
hi
Explanation:
Chemical reactions are an integral part of technology, of culture, and indeed of life itself. Burning fuels, smelting iron, making glass and pottery, brewing beer, and making wine and cheese are among many examples of activities incorporating chemical reactions that have been known and used for thousands of years. Chemical reactions abound in the geology of Earth, in the atmosphere and oceans, and in a vast array of complicated processes that occur in all living systems.
-facts
Write the formulas for the following ionic compounds.
potassium iodide
magnesium phosphide
silver sulphide
iron(III) bromide
magnesium hydroxide
sodium sulphate
lead (IV) nitrate
ammonium carbonate
Answer:
1) KI
2) Mg3P2
3) Ag2S
4) FeBr3
5) Mg(OH)2
6) Na2SO4
7) Pb(NO3)4
8) (NH4)2CO3
How many molecules are in 5.60 L of oxygen gas
Answer:
5.6L of O2 means we have 0.25 moles of O2. and as 1 molecule of O2 has 2 atoms, so, 1.50575*10^23 molecules will have 2*1.50575*10^23 atoms=3.0115*10^23 atoms of O.
Why does air with higher amounts of water vapor have a lighter density?
Answer:
moist air is less dense than dry air because water has a lower molecular weight than nitrogen and oxygen
Answer:
Water vapor is a relatively light gas when compared to diatomic Oxygen and diatomic Nitrogen. Thus, when water vapor increases, the amount of Oxygen and Nitrogen decrease per unit volume and thus density decreases because mass is decreasing.
2 spaceships are in deep space. The distance between the centers of mass of the two spaceships is 300 m, and the force between them is 5.51×10^-7N. If one spaceship has a mass of 24,000 kg, what is the mass of the other spaceship?
Answer:
Mass of the second spaceship is 3.10 × 10⁴ kg 0r 31000 kg
Explanation:
From Newton's law of universal gravitation, the force of attraction , F, between two bodies is directly proportional to the product of their masses and inversely proportional to the square root of the distance between them.
F = Gm₁m₂/d²
m₁ = 24000 kg
m₂ = ?
d = 300 m
F = 5.51 × 10⁻⁷ N
Gravitational constant, G = 6.67 × 10⁻¹¹ N.m²/kg²
Making m₂ subject of the formula : m₂ = F × d² / G × m₁
m₂ = 5.51 x 10⁻⁷ × 300 × 300 / 6.67 × 10⁻¹¹ × 24000
m₂ = 3.1 × 10⁴ kg
Therefore, Mass of the second spaceship is 31000 kg
How many moles of oxygen are required to use up 2 moles of propane?
Answer:
6.0 moles
Explanation:
The thing to remember about balanced chemical equations is that the stoichiometric coefficients added to each chemical species that takes part in the reaction are equivalent to moles.
I think its 10 moles, hope this helps.
What phase change occurs when a solid changes into a gas?
Answer:
Sublimation
Explanation:
Sublimation is the term used to describe when a solid "skips" the liquid phase and turns directly into a gas from solid form. Dry ice demonstrates sublimation when exposed to room temperature air.
Magnesium reacts with the oxygen in the air to form magnesium oxide. If 35 g of O2 was used in the reaction. How many Liters of O2 were present at 301K and a pressure of 1.35 atm?
Answer:
20.02 Liters
Explanation:
Mass = 35g
Volume = ?
Temperature = 301K
Pressure = 1.35 atm
The relationship between the quantities is given as;
PV = nRT
n = mass / Molar mass = 35 / 32 = 1.09375 mol
V = nRT / P
V = (1.09375 * 0.0821 * 301) / 1.35
V = 20.02 L
PLEASEEEE HELP URGENTTTT
Answer:
i don't see the question
Explanation:
Fill in the blanks and name the process.
What is the process of ____ reproduction where a cell makes ___ of itself?
What is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution?
Answer:
D
Explanation:
all ya got to do is divide the moles from the solution... so 3.0 divided by 0.25. put it in a calculator
hope this helps
The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
What is Molarity?Molarity of a given solution is known as the total number of moles of solute per litre of the solution. A solution that is 1.00 molar (written 1.00 M) contains 1.00 mole of solute for every liter of solution.
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
The unit of molarity is mol L⁻¹.
Molarity is temperature dependent because as temperature changes, volume of the solution also changes.
Given,
3.0 moles of Saline (NaCl)
Volume of solution = 0.25L
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
Molarity = 3 ÷ 0.25 = 12 M
Therefore, The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
Learn more about molarity, here:
brainly.com/question/8732513
#SPJ2
What is the molality of a solution containing 30.0 g of napthalalene (C10H8) dissolved in 500.0 g of toulene? Please provide work. Thanks in advance!
Answer:
0.468 m
Explanation:
From the question given above, the following data were obtained:
Mass of napthalalene (C₁₀H₈) = 30 g
Mass of toulene = 500 g
Molality =?
Next, we shall determine the number of mole in 30 g of C₁₀H₈. This can be obtained as follow:
Mass of C₁₀H₈ = 30 g
Molar mass of C₁₀H₈ = (12×10) + (8×1)
= 120 + 8
= 128 g/mol
Mole of C₁₀H₈ =?
Mole = mass / molar mass
Mole of C₁₀H₈ = 30 / 128
Mole of C₁₀H₈ = 0.234 mole
Next, we shall convert 500.0 g of toulene to Kg. This can be obtained as follow:
1000 g = 1 Kg
Therefore,
500 g = 500 g × 1 Kg / 1000 g
500 g = 0.5 Kg
Finally, we shall determine the molality of the solution. This can be obtained as follow:
Mole of solute (C₁₀H₈) = 0.234 mole
Mass of solvent (toulene) = 0.5 Kg
Molality =?
Molality = mole of solute / Kg of solvent
Molality = 0.234 / 0.5
Molality = 0.468 m