When dinitrogen pentoxide is heated, it decomposes to
nitrogen dioxide and oxygen. How many moles of nitrogen
dioxide can be formed from the decomposition of 1.25 g of
dinitrogen pentoxide?

Answer: three

Explanation:

The elements that have an outer electron configuration of ms2nd2 are located in the d-block of the periodic table and include some of the transition metals and lanthanides.

To determine which elements in the periodic table have this outer electron configuration, you can look at the position of the d-block elements in the table. The d-block elements are located in the middle of the table and include the transition metals. These elements have partially filled d orbitals, which can accommodate up to 10 electrons.

Elements in the d-block with an atomic number of 21 through 30 (scandium through zinc) have an outer electron configuration of d10s2 and do not fit the ms2nd2 configuration. However, elements in the d-block with an atomic number of 39 through 48 (yttrium through cadmium) have an outer electron configuration of d10s2p1 and can have the ms2nd2 configuration by removing the single electron in the p orbital. Elements in the d-block with an atomic number of 57 through 80 (lanthanum through mercury) also have the possibility of having an outer electron configuration of ms2nd2.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

The maximum mass of carbon dioxide that could be produced from 6.9 g of octane and 42.2 g of oxygen is 21.3 g, rounded to 2 significant digits.

What is Octane?

Octane is a hydrocarbon with the chemical formula [tex]C_{8} H_{18}[/tex] It is an organic compound belonging to the alkane group, which means it consists of only carbon (C) and hydrogen (H) atoms bonded together by single covalent bonds. Octane is a colorless liquid with a molecular weight of approximately 114 g/mol and is commonly used as a component in gasoline or fuel for internal combustion engines.

From the balanced equation, we know that 1 mole of octane reacts with 12.5 moles of oxygen to produce 8 moles of carbon dioxide. Therefore, 0.0605 mol of octane would require 0.0605 mol x 12.5 = 0.75625 mol of oxygen to fully react.

Since we have only 1.32 mol of oxygen, which is in excess compared to the 0.75625 mol required by octane, oxygen is the excess reactant, and octane is the limiting reactant.

Now, we can use the stoichiometry of octane to carbon dioxide to calculate the maximum mass of carbon dioxide produced:

From the balanced equation, we know that 1 mole of octane produces 8 moles of carbon dioxide.

Molar mass of carbon dioxide (CO2) = 44.01 g/mol

Maximum moles of carbon dioxide produced from octane = 0.0605 mol x 8 = 0.484 mol

Maximum mass of carbon dioxide produced from octane = 0.484 mol x 44.01 g/mol = 21.3 g

Remember to round the final answer to 2 significant digits as requested.

Learn more about Octane from the given link

https://brainly.com/question/28469125

#SPJ1

To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:

[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M

The acid dissociation constant (Ka) can then be calculated using the equation:

Ka = [H+][A-]/[HA]

where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:

α = [A-]/[HA]

Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:

[A-] ≈ 0.500α

[HA] ≈ 0.500 - 0.500α

Substituting these expressions into the equation for Ka, we get:

Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α

≈ ([H+]/Ka)(0.500α)/(1-α)

Solving for Ka, we get:

Ka ≈ H+/0.500α

Substituting the values we have calculated, we get:

Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)

Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).

(b) To find the percentage of acid that is ionized in the solution, we can use the equation:

α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))

where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:

α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008

Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.

Learn more about dissociation constant from

https://brainly.com/question/30930515

#SPJ1

To solve this problem, we can use the following equation that relates the pH of a solution to the acid dissociation constant (Ka) and the concentration of the acid:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

(a) To find the Ka of the unknown acid, we need to first find the concentration of hydrogen ions in the solution. We can do this by taking the inverse of the pH and converting it to a concentration:

[H+] = 10^(-pH) = 10^(-3.56) = 2.17 × 10^(-4) M

The acid dissociation constant (Ka) can then be calculated using the equation:

Ka = [H+][A-]/[HA]

where [A-] is the concentration of the conjugate base of the acid and [HA] is the concentration of the undissociated acid. Since we don't know the values of these concentrations, we need to use the fact that the solution is 0.500 M to make an assumption about the degree of dissociation (α) of the acid:

α = [A-]/[HA]

Since the solution is not extremely dilute, we can assume that the degree of dissociation is small and that the concentration of the undissociated acid is approximately equal to the initial concentration of the acid. Therefore, we can write:

[A-] ≈ 0.500α

[HA] ≈ 0.500 - 0.500α

Substituting these expressions into the equation for Ka, we get:

Ka = [H+][A-]/[HA] ≈ ([H+][A-])/0.500α

≈ ([H+]/Ka)(0.500α)/(1-α)

Solving for Ka, we get:

Ka ≈ H+/0.500α

Substituting the values we have calculated, we get:

Ka ≈ (2.17 × 10^(-4))(1-α)/(0.500α) = 4.37 × 10^(-5)

Therefore, the acid dissociation constant of the unknown acid is approximately 4.37 × 10^(-5).

(b) To find the percentage of acid that is ionized in the solution, we can use the equation:

α = [A-]/[HA] = 10^(-pKa + pH)/(1 + 10^(-pKa + pH))

where pKa is the negative logarithm of the acid dissociation constant. Substituting the values we have calculated, we get:

α = 10^(-(-4.36) + 3.56)/(1 + 10^(-(-4.36) + 3.56)) ≈ 0.008

Therefore, the percentage of acid that is ionized in the solution is approximately 0.8%.

Learn more about dissociation constant from

brainly.com/question/30930515

#SPJ1

The decay constant for this process is

The decay constant (λ) is related to the half-life (t1/2) by the following equation:

λ = ln(2) / t1/2

where

ln(2) is the natural logarithm of 2, which is approximately 0.693.

Substituting the given half-life of 3.1 min into the equation, we get:

λ = ln(2) / (3.1 min) ≈ 0.223 min^(-1)

Therefore, the decay constant for the β decay of Tl-208 is approximately 0.223 min^(-1).

Learn more about decay constant at

https://brainly.com/question/12699719

#SPJ1

3.0 moles of [tex]Al[/tex] can fully react with hydrogen chloride to produce 4.5 moles of [tex]H_{2}[/tex]. Thus, 0.93 moles will be produced by 0.62 moles of [tex]Al[/tex].

For more information on stoichiometry kindly visit to

https://brainly.com/question/19484482

#SPJ1

Answer:

acid +metal ----->salt +hydrogen

The standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.

What is standard change?

To find the standard change in Gibbs free energy of the reaction, we need to use the following equation:

ΔG° = -RT ln(K)

where ΔG° is the standard change in Gibbs free energy, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (25 °C = 298 K), and K is the equilibrium constant.

To find K, we need to use the equilibrium partial pressures:

K = (PC × PD) / (PA × PB²)

where PA, PB, PC, and PD are the equilibrium partial pressures of A, B, C, and D, respectively.

Substituting the values, we get:

K = (5.47 atm × 5.63 atm) / (5.63 atm × (5.00 atm)²)

K = 0.6176

Now we can calculate the standard change in Gibbs free energy:

ΔG° = -RT ln(K)

ΔG° = -(8.314 J/mol·K) × (298 K) × ln(0.6176)

ΔG° = -1,690 J/mol or -1.69 kJ/mol

Therefore, the standard change in Gibbs free energy of the reaction at 25 ∘C is -1.69 kJ/mol.

What is free energy?

Free energy, also known as Gibbs free energy, is a thermodynamic quantity that represents the amount of energy in a system that is available to do work at a constant temperature and pressure. It is denoted by the symbol G and is expressed in units of joules (J) or calories (cal).

In simple terms, free energy is the energy that can be used to do work. It is defined by the equation:

ΔG = ΔH - TΔS

where ΔH is the change in enthalpy (heat content) of the system, ΔS is the change in entropy (disorder) of the system, and T is the absolute temperature in Kelvin.

If ΔG is negative, the reaction is spontaneous and can proceed without the input of external energy. If ΔG is positive, the reaction is non-spontaneous and requires energy input to proceed. If ΔG is zero, the system is at equilibrium.

To know more about free energy, visit:

https://brainly.com/question/14150518

#SPJ1

40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of  additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml

A uniform combination of a number of solutes within a solvent is referred to as a solution. One frequent illustration of a Solution is adding sugar cubes into your cup of tea and coffee. Solubility is the quality that makes sugar molecules more soluble.

In water, potassium chloride (KCl) dissolves. Its water solubility, like that of all other solutes, depends on temperature. The solubility of a salt increases as the solvent's temperature rises. This is fairly simple to experience with sugar. 40 grams of KCl are dissolved in 100 mL of water at 45C. 5g of  additional grams of KCI are needed to make the solution saturated at 80 C as the solubility of KCl is 45g/ml.

To know more about solubility, here:

https://brainly.com/question/29661360

#SPJ1

The heat released is 1600 joules, so the correct option is the first one.

To calculate the heat released when 60.0 g of ethanol cools from 70 °C to 43 °C, we can use the formula for heat transfer:

q = m * C * ΔT

where:

Given:

Mass of ethanol (m) = 60.0 g

Specific heat capacity of ethanol (C) = 1.0 J/(g°C) (at constant pressure)

Change in temperature (ΔT) = Final temperature - Initial temperature = 43 °C - 70 °C = -27 °C

Note that the negative sign in ΔT indicates that heat is being released (i.e., the substance is cooling).

Plugging in the given values into the formula:

q = 60.0 g *1.0 J/(g°C) * (-27 °C)

q ≈ -1600 J

The negative sign is for notation, here we can see that the amount of heat is 1600 joules, so the correct option is the first one.

Learn more about heat at.

https://brainly.com/question/22741007

#SPJ1

5,250. The number was rounded up from 5,249 because the last digit, 9, is greater than or equal to 5.

Rounding up is a mathematical operation that involves increasing a number to its nearest whole number. It is commonly used when dealing with money, measurements, or statistics. When rounding up, the number is increased to the next highest whole number. For example, if a number is 6.7, it would be rounded up to 7. Rounding up is often used when dealing with exact measurements or estimates to simplify the calculations. It can also be used to make the results of a calculation easier to understand. In the case of money, rounding up can be used to round a number to the nearest dollar. This prevents dealing with fractional amounts of money. Rounding up can also be utilized in statistical analysis, such as in the calculation of mean or median. This simplifies the data and prevents dealing with fractions or decimals.

To learn more about  rounded up

https://brainly.com/question/17396482

#SPJ9

In the peroxodisulfate ion, Peroxydisulfate-, all the atoms have oxidation values that add up to +6.

Most often, the polymerization of different alkenes, such as styrene, acrylonitrile, and fluoroalkenes, is started using salts of peroxydisulfate. The homolysis of peroxydisulfate causes polymerization to begin. 2 [Peroxydisulfate] [Sulfate]

Ag: +1

Sulfur: 0

Nitrogen: +2 (in Nitric oxide)

Oxygen: -2 (in Water)

Hydrogen: +1 (in Water)

The peroxodisulfate ion, Peroxydisulfate-, consists of one disulfate (Peroxydisulfate-) group and two peroxy (Oxygen2-) groups. Normal oxygen oxidation number is 2, however in a peroxy group it is -1. The charge of the ion, which is -2, is equal to the total sum of the oxidation numbers of all the atoms in the ion. As a result, we may write:

2(-1) + 2x + 8(-2) = -2

-2 + 2x - 16 = -2

2x = 12

x = +6

To know more about Peroxydisulfate visit:-

https://brainly.com/question/8597247

#SPJ1

Enantiomers rotate the plane of polarized light in opposite directions, and this property is used to distinguish between them in a process called optical rotation.

Enantiomers are pairs of molecules that are non-superimposable mirror images of each other.

They are isomers, meaning they have the same molecular formula and connectivity but differ in their three-dimensional arrangement of atoms in space.

Enantiomers exhibit identical physical and chemical properties, except for their interaction with plane-polarized light (a type of light that oscillates in a single plane).

Learm= more about enantiomers at: https://brainly.com/question/30216513

#SPJ1

The pH of .3 M NH, where is K = 1.7 x 10^-5 is 11.87 calculated from the equation of dissociation constant.

Kb= [A] /[A + ][X− ]

​1.7×10 −5 = x ^2 /0.3

⇒x= 7.5 ×10 −3

∴[OH − ][H + ]=7.5 ×10 −3

[H + ] =10 ^−14 ⇒pH=11.87

When describing the acidity or basicity of an aqueous solution, chemists use the pH scale, which is also known as acidity and previously stood for "potential of hydrogen". Greater pH values are seen in basic or alkaline solutions than acidic solutions.

Potential hydrogen is the meaning of the acronym pH, which indicates how much hydrogen is present in liquids and how active the hydrogen ion is.

As a first step, we shall ascertain the pKa of the solution before calculating its Ka. When a solution reaches the equivalence point, its pH and pKa are equal. So, by using a titration curve and the Ka = - log pKa equation, we may rapidly ascertain the value of Ka.

For more information on pH kindly visit to

https://brainly.com/question/2288405

#SPJ1

Answer:

The answer is B: 0.0025 M

According to molar concentration and dilution concept, the  [H₃O+] in the final solution is closest to 0.05 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions concentrated and diluted it is calculated as, M₁V₁=M₂V₂ substitution gives M₂=0.25×100/500=0.05

Learn more about molar concentration,here:

https://brainly.com/question/15532279

#SPJ2

At 40°C is the temperature at which saturated solutions of potassium nitrate and sodium nitrate contain the same weight of solute per 100 mL of water contain the same weight of solute per 100 mL of water.

Temperature is a unit of warmth or coldness that can be defined in the context of any number of arbitrary scales. It indicates the direction that heat energy will naturally flow, i.e., through a hotter (body) to a colder (body) body.

Temperature is not the same as the energy in a thermodynamic system; for instance, an iceberg has a significantly larger total heat energy than a match, despite the fact that a match is burning at an extremely high temperature. At 40°C is the temperature at which saturated solutions of potassium nitrate and sodium nitrate contain the same weight of solute per 100 mL of water.

To know the temperature, here:

https://brainly.com/question/11464844

#SPJ1

The molality of a solution is determined by the amount of solute (in moles) and the mass of the solvent (in kilograms). To convert the mass of NaCl to moles, the molar mass of NaCl is 58.44 g/mol. The number of moles of NaCl is 25 g / 58.44 g/mol = 0.427 mol. The molality of the solution is 0.213 mol/kg.

The amount of a solute dissolved in a solvent is indicated by the chemical term "molality," which is commonly defined in terms of moles of solute per kilogramme of solvent. Because it takes into account variations in the volume of the solution owing to temperature and pressure, it differs from molarity, which quantifies the quantity of a solute in moles per litre of solution.

To calculate the molality of a solution, we need to know the amount of solute (in moles) and the mass of the solvent (in kilograms).

In this case, we are given:

Mass of solute (NaCl) = 25 g

Mass of solvent (water) = 2.0 kg

To calculate the amount of solute in moles, we need to convert the mass of NaCl to moles using its molar mass:

Molar mass of NaCl = 58.44 g/mol

Number of moles of NaCl = (25 g) / (58.44 g/mol) = 0.427 mol

Now we can calculate the molality of the solution:

Molality = (number of moles of solute) / (mass of solvent in kg)

Molality = (0.427 mol) / (2.0 kg) = 0.213 mol/kg

Therefore, the molality of the solution is 0.213 mol/kg.

To know more about molality, visit

brainly.com/question/26921570

#SPJ1

To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.

Temperature is a physical quantity that measures the average kinetic energy of the particles in a system. It is an important parameter for understanding the behavior of matter and the underlying physical processes at work. Temperature is measured in units such as degrees Celsius (°C), Fahrenheit (°F), Kelvin (K), or Rankine (°R). Temperature affects the rate at which chemical reactions occur and the movement of particles in solids, liquids, and gases.

The ideal gas law states that PV = nRT,
where n is the number of moles,
P is the pressure,
V is the volume, R is the ideal gas constant (8.314 J/molK), and
T is the temperature in Kelvin.
Rearranging the equation, we get T = (PV)/(nR).
Plugging in our values, we get T = (89.9 atm * 4191 mL)/(2.6 mol * 8.314 J/molK) = 115.2 K.
To convert to Celsius, we subtract 273.15 from the Kelvin temperature, giving us a final answer of 42.1°C.

To learn more about temperature
https://brainly.com/question/27988898
#SPJ1

The correct answer that represents beta decay is

In beta decay, a neutron in the nucleus is converted into a proton, and an electron (or beta particle) and an antineutrino are emitted from the nucleus.

In this case, a neutron in the 164Gd nucleus is converted into a proton, and an electron is emitted from the nucleus, resulting in the production of 164Tb.

Option A is not a valid representation of any known type of radioactive decay.

Option B represents alpha decay, in which an alpha particle is emitted from the nucleus.

Option C represents electron capture, in which an electron is captured by the nucleus.

Learn more about beta decay at

https://brainly.com/question/27770519

#SPJ1

The tennis ball has a kinetic energy of around 56.8 J. The aircraft has a kinetic energy of around 4.43 x 10⁹ J. The hot air balloon travels at a speed of around 9.0 m/s.

How much effort must be put into slowing down a 750 kg automobile from 100 km/h to 50 km/h. We know that the of this automobile at 50.0 km/h is 72,300 Joules from the last example problem.

Ek = 0.5 x 0.058 kg x (46 m/s)²

Ek = 0.5 x 0.058 kg x 2116 m²/s²

Ek = 56.8468 J

Ek = 0.5mv²

Ek = 0.5 x 2.15 x 10⁵ kg x (255 m/s)²

Ek = 0.5 x 2.15 x 10⁵ kg x 65025 m²/s²

Ek = 4.433 x 10⁹ J

Ek = 0.5mv²

v = √(2Ek/m)

v = √(2 x 76550 J / 1890 kg)

v = √(81.011 J/kg)

v = 9.0 m/s (approx.)

To know more about energy visit:-

https://brainly.com/question/8630757

#SPJ1

The direction of the reaction, as written, spontaneous at 25 ∘C and standard pressure is reverse.

To calculate the value of Δ∘rxn at 25.0 ∘C, we can use the equation:

Δ∘rxn(T2) = Δ∘rxn(T1) + ΔH∘(products) - ΔH∘(reactants)

where;

Using the data from the table of thermodynamic properties, we can look up the enthalpy change of formation values for C2H4(g), H2O(l), and C2H5OH(l):

ΔH∘f(C2H4(g)) = 52.26 kJ/mol

ΔH∘f(H2O(l)) = -285.83 kJ/mol

ΔH∘f(C2H5OH(l)) = -277.69 kJ/mol

Substituting these values into the equation, we get:

Δ∘rxn(25.0 ∘C) = -44.2 kJ + (-277.69 kJ/mol) - (-52.26 kJ/mol)

Δ∘rxn(25.0 ∘C) = -44.2 kJ - (-277.69 kJ/mol) + 52.26 kJ/mol

Δ∘rxn(25.0 ∘C) = -44.2 kJ + 277.69 kJ/mol + 52.26 kJ/mol

Δ∘rxn(25.0 ∘C) = 233.23 kJ/mol

So the value of Δ∘rxn at 25.0 ∘C is 233.23 kJ/mol.

In which direction is the reaction, as written, spontaneous at 25 ∘C and standard pressure?

Since the value of Δ∘rxn at 25.0 ∘C is positive (233.23 kJ/mol), the reaction as written is not spontaneous at this temperature and standard pressure. The correct answer is "reverse."

Learn more about enthalpy change here: https://brainly.com/question/16387742

#SPJ1

Answer silver chloride (AgCl) and lead chloride (PbCl2).

Explanation:

Two salts that have the same solubility at approximately 23°C are silver chloride (AgCl) and lead chloride (PbCl2).

Both AgCl and PbCl2 have very low solubilities in water at room temperature, and their solubilities are similar at around 23°C. They are both sparingly soluble salts, meaning they dissolve only to a limited extent in water to form a saturated solution.

It's important to note that solubility can vary depending on the specific conditions, such as temperature, pressure, and presence of other substances. The solubility of salts can also be affected by factors such as pH and the presence of other ions in solution. Therefore, it's always best to consult reliable sources, such as reference tables or experimental data, for accurate solubility information at a given temperature.

The above is about the movement of lithospheric plates. See explanation and attached image for details.

The movement of lithospheric plates is driven by convection currents in the Earth's mantle, which are caused by heat generated from the Earth's core. These currents cause the lithospheric plates to move, and the motion can result in a variety of geological phenomena, including earthquakes, volcanic activity, and the formation of mountain ranges and oceanic trenches.

There are three main types of plate boundaries, and each one results in a different type of movement of lithospheric plates:

Divergent Boundaries: At divergent boundaries, lithospheric plates move away from each other. This movement is caused by the upwelling of hot material from the mantle, which pushes the plates apart. As the plates move away from each other, magma rises up to fill the gap between them, creating new crust. Divergent boundaries are where new oceanic crust is formed.

Convergent Boundaries: At convergent boundaries, lithospheric plates move towards each other. There are three types of convergent boundaries: oceanic-oceanic, oceanic-continental, and continental-continental. At oceanic-oceanic and oceanic-continental convergent boundaries, one plate is forced beneath the other, creating a subduction zone. This movement is caused by the sinking of a denser plate beneath a less dense plate. As the denser plate sinks, it melts and can trigger volcanic activity. At continental-continental convergent boundaries, the plates are too buoyant to subduct, so they instead buckle and push up, forming mountain ranges.

Transform Boundaries: At transform boundaries, lithospheric plates move past each other. This movement is caused by the lateral movement of the convection currents in the mantle. Transform boundaries can create large faults, which can lead to earthquakes.

Overall, the movement of lithospheric plates is a complex and dynamic process, driven by the movement of material within the Earth's mantle.

Learn about movement of lithospheric plates here brainly.com/question/2722711

#SPJ1

The molecular formula of the compound, given that it contains 51.39% carbon, 8.64% hydrogen, and 39.97% nitrogen is C₆H₁₂N₄

To obtain the molecular formula, we must first determine the empirical formula. Details on how to obtain the empirical formula is given beloww:

Divide by their molar mass

C = 51.39 / 12 = 4.283

H = 8.64 / 1 = 8.64

N = 39.97 / 14 = 2.855

Divide by the smallest

C = 4.283 / 2.855 = 1.5

H = 8.64 / 2.855 = 3

N = 2.855 / 2.855 = 1

Multiply through by 2 to express in whole number

C = 1.5 × 2 = 3

H = 3 × 2 = 6

N = 1 × 2 = 2

Thus, we can conclude that the empirical formula is C₃H₆N₂

Finally, we shall determine the molecular formula. Details below

Molecular formula = empirical × n = mass number

[C₃H₆N₂]n = 140.22

[(12×3) + (1×6) + (14×2)]n = 140.22

70n = 140.22

Divide both sides by 70

n = 140.22 / 70

n = 2

Molecular formula = [C₃H₆N₂]n

Molecular formula = [C₃H₆N₂]₂

Molecular formula = C₆H₁₂N₄

Learn more about molecular formula:

https://brainly.com/question/21568927

#SPJ1