Answer:
The final speed of the sprinter would be approximately 7.61 m/s.
Explanation:
We can use Newton's second law of motion and one of the equations of motion to solve for the final speed of the sprinter.
F = m * a
Where:
F = Force
m = Mass
a = Acceleration
We can rearrange this equation to solve for acceleration:
a = F / m
In this case, the force exerted by the sprinter is the net force because there is no other force acting on him/her horizontally. So we have:
a = 655 N / 64.5 kg ≈ 10.15 m/s^2
Next, we can use the one of the equations of motion to find the final speed of the sprinter. The equation we need is:
v_f = v_i + a * t
where:
v_f = the final speed
v_i = the initial speed (which is zero in this case)
a = the acceleration
t = the time interval
We can enter in the values we calculated:
v_f = 0 + (10.15 m/s^2) * (0.75 s) = 7.6125 m/s
Rounding to 2 decimal places, the final speed of the sprinter is approximately 7.61 m/s.
in contextual integrity, the data subject decides whether or not a requested transmission is acceptable given it's ci-tuple. True/False
In contextual integrity, the data subject decides whether or not a requested transmission is acceptable given it's ci-tuple - True.
In contextual integrity, the data subject is the individual whose personal information is being transmitted, and they have the power to decide whether or not a requested transmission is acceptable based on the norms and values of the context in which the information is being transmitted. The "ci-tuple" refers to the contextual information tuple, which includes information about the context of the data transmission, such as the sender, recipient, type of data, and purpose of the transmission. The data subject can use this information to make an informed decision about whether or not the transmission is acceptable.
To know more about ci-tuple, click here:
https://brainly.com/question/20813201
#SPJ11
a block of wood weighs 280 n and has a density of 0.78 g/cm3. what additional downward force is required to sink it in fresh water?
An additional downward force of approximately 73.16 N is required to sink the block of wood in fresh water.
To help you with your question, let's consider the terms buoyancy and Archimedes' principle. When a block of wood is submerged in water, it experiences an upward buoyant force due to the displaced water.
Archimedes' principle states that the buoyant force is equal to the weight of the displaced fluid.
First, we need to find the volume of the wood.
Since the weight of the wood is 280 N and its density is 0.78 g/cm³, we can use the formula:
Weight = Density × Volume × Acceleration due to gravity.
Convert density to kg/m³: 0.78 g/cm³ = 780 kg/m³. Taking gravity as 9.81 m/s², we have:
280 N = 780 kg/m³ × Volume × 9.81 m/s²
Volume = 0.036 m³
Next, find the weight of the displaced water.
The density of fresh water is approximately 1,000 kg/m³. Using the same formula, we get:
Weight_water = 1000 kg/m³ × 0.036 m³ × 9.81 m/s²
Weight_water = 353.16 N
Finally, to find the additional downward force required to sink the wood, subtract the weight of the wood from the weight of the displaced water:
Additional_force = Weight_water - Weight_wood
Additional_force = 353.16 N - 280 N
Additional_force = 73.16 N
Learn more about archimedes principle at
https://brainly.com/question/31950755
#SPJ11
A pilot heads his jet due east. The jet has a speed of 475 mi/h relative to the air. The wind is blowing due north with a speed of 40 mi/h. (Assume that the i vector points east, and the j vector points northwhat is the true direction of the jet? (round your answer to one decimal place.)
The true direction of the jet is approximately 4.8 degrees north of east.
To determine the true direction of the jet, we need to calculate the resultant velocity vector. We can start by representing the velocity of the jet and the wind as vectors using the i and j components.
The velocity vector of the jet is 475i (since it is heading due east) and the velocity vector of the wind is 40j (since it is blowing due north).
To find the resultant vector, we can add these two vectors using vector addition.
Resultant velocity vector = 475i + 40j
To find the direction of this vector, we need to use trigonometry. We can calculate the angle that this vector makes with the east using the arctangent function.
Angle = arctan(40/475)
Angle ≈ 4.8 degrees north of east
To learn more about velocity click here https://brainly.com/question/17127206
#SPJ11
Pls help! It’s not exactly physics but there’s nothing that says Science :/
Which statement best helps to explain the graph produced by the model?
The Moon's orbit causes different areas of Earth to receive fewer or more hours of daylight at different times
of the year.
Earth is closer to the Sun in the summer in Fresno than in the winter, which causes the amount of daylight to
vary between seasons.
Light from the Sun reflects off the snow on Earth's surface back into space, which reduces the amount of
daylight during the winter months.
The Earth's tilted axis of rotation results in different regions of Earth receiving fewer or more hours of daylight
at different times of the year.
The Earth's tilted axis of rotation results in different regions of Earth receiving fewer or more hours of daylight at different times of the year.
The seasons are caused by Earth's tilted axis.
Different regions of the Earth are exposed to the Sun's strongest rays at various times of the year. Therefore, the Northern Hemisphere experiences summer when the North Pole tilts towards the Sun. Additionally, winter in the Northern Hemisphere occurs when the South Pole tilts towards the Sun.
Instead of the Earth orbiting the sun, day and night are caused by the planet rotating on its axis. One day encompasses both daytime and nighttime and is measured by how long it takes the Earth to complete one rotation around its axis.
To learn more about cycle of daylight, click:
https://brainly.com/question/29752241
#SPJ1
A 8.0-cm-long spring is attached to the ceiling. When a 1.7kg mass is hung from it, the spring stretches to a length of 13 cm. What is the spring constant k? Express your answer to two significant figures and include the appropriate units. How long is the spring when a 3.0 kg mass is suspended from it? Express your answer to two significant figures and include the appropriate units.
The spring constant k is approximately 330 N/m, and the length of the spring when a 3.0 kg mass is suspended from it is approximately 0.17 m.
To find the spring constant k, we can use Hooke's Law, which states that F = kx.
In this case, F is the force exerted by the 1.7 kg mass (F = mg) and x is the change in the spring's length (∆L = 13 cm - 8 cm = 5 cm).
1. Calculate the force:
F = mg = (1.7 kg)(9.81 m/s²) = 16.677 N.
2. Convert x to meters:
x = 5 cm * 0.01 m/cm = 0.05 m.
3. Rearrange Hooke's Law to find k:
k = F/x = 16.677 N / 0.05 m = 333.54 N/m ≈ 330 N/m (to two significant figures).
Now, to find the length of the spring with a 3.0 kg mass:
1. Calculate the new force:
F_new = m_new * g = (3.0 kg)(9.81 m/s²) = 29.43 N.
2. Rearrange Hooke's Law to find the new change in length:
x_new = F_new / k = 29.43 N / 330 N/m = 0.0892 m.
3. Add the new change in length to the original length:
L_new = 0.08 m + 0.0892
m = 0.1692
m ≈ 0.17 m (to two significant figures).
Learn more about Hooke's law at https://brainly.com/question/8812716
#SP
what is the period of a simple pendulum 84 cmcm long on the earth?
The period of a simple pendulum 84 cm long on Earth is approximately 1.35 seconds.
The period of a simple pendulum is given by the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. On Earth, the value of g is approximately 9.81 m/s^2. Converting the length of the pendulum from centimeters to meters, we have L = 0.84 m. Substituting these values into the formula gives:
T = 2π√(0.84 m/9.81 m/s^2) ≈ 1.35 s.
Therefore, the period of a simple pendulum 84 cm long on Earth is approximately 1.35 seconds.
To learn more about Pendulum click here
https://brainly.com/question/29702798
#SPJ11
Existing rocks are buried and forced toward the mantle, increasing heat and pressure. This is the first step in the formation of metamorphic rocks.
Which best describes the next step in the formation of metamorphic rocks?
Buried rocks melt deep within the mantle.
Lava melts underlying rocks, which crystallize into new minerals.
Rocks that were buried are exposed at Earth’s surface, where they are weathered and eroded.
Magma pockets rise, which increases heat, and minerals change due to temperature and pressure.
HELP ASAP Pleaseee
The next step in the formation of metamorphic rocks is beast described by
Magma pockets rise, which increases heat, and minerals change due to temperature and pressure.What is contact metamorphismThe process of contact metamorphism s where rocks that are in contact with magma experience high temperatures and undergo changes in mineralogy due to the heat.
This can result in the formation of new minerals or the recrystallization of existing ones
Overall the process of metamorphism can occur due to different types of metamorphic agents including heat, pressure and chemically active fluids which can change the rocks mineralogy and texture, leading to the formation of metamorphic rocks
Learn more about metamorphic rocks at
https://brainly.com/question/20475194
#SPJ1
how does the overtone number relate to the standing wave pattern number, previously denoted with the variable n ? how does the overtone number relate to the standing wave pattern number, previously denoted with the variable ? overtonenumber
The overtone number and the standing wave pattern number, previously denoted as "n," are related in the context of harmonic frequencies in standing wave systems.
In a standing wave system, such as a vibrating string or an air column, multiple harmonic frequencies can be produced. The standing wave pattern number, denoted as "n," represents the number of half-wavelengths that fit into the length of the system. It determines the fundamental frequency (n = 1) and subsequent harmonics (n = 2, 3, 4, and so on).
The overtone number, on the other hand, represents the number of harmonic frequencies that are multiples of the fundamental frequency. It includes all the harmonics, both odd and even. Therefore, the overtone number includes both the standing wave pattern numbers that correspond to odd harmonics (odd multiples of the fundamental frequency) and even harmonics (even multiples of the fundamental frequency).
In summary, the overtone number encompasses all the harmonic frequencies in a standing wave system, while the standing wave pattern number specifically refers to the individual harmonic frequencies.
To learn more about Fundamental frequency - brainly.com/question/31314205
#SPJ11
during sprinting acceleration, horizontal forces are greater during the propulsive phase compared to the braking phase.
During sprinting acceleration, the horizontal forces are greater during the propulsive phase than the braking phase.
When an athlete sprints, the ground reaction forces (GRF) generated during each step contribute to the acceleration of the athlete. These forces can be divided into vertical and horizontal components. The propulsive phase occurs when the foot is in contact with the ground and is pushing backward against the ground to generate the horizontal force. During this phase, the horizontal forces are greater than the braking phase, where the foot is lifted off the ground and moving forward. The greater horizontal forces during the propulsive phase contribute to the forward acceleration of the athlete. Therefore, maximizing the propulsive forces during sprinting is an important factor for improving performance.
To learn more about acceleration:
https://brainly.com/question/12550364
#SPJ11
a balloon has a volume of 2.68 liters at 24.0°c. the balloon is heated to 48.0°c. calculate the new volume of the balloon. group of answer choices
The new volume of the balloon when heated to 48.0°C is 5.36 liters. To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The formula for the combined gas law is : (P₁V₁)/T₁ = (P₂V₂)/T₂
P₁ and T₁ are the pressure and temperature of the gas before the change, P₂ and T₂ are the pressure and temperature of the gas after the change, and V₁ and V₂ are the volumes of the gas before and after the change.
In this problem, we are given the initial volume V₁ = 2.68 liters and the initial temperature T₁ = 24.0°C. We want to find the final volume V₂ when the temperature changes to T₂ = 48.0°C. We are not given the pressure of the gas, but we can assume that it remains constant.
Substituting the given values into the combined gas law, we get:
(P₁V₁)/T₁ = (P₂V₂)/T₂
Since the pressure is constant, we can cancel it out:
V₁/T₁ = V₂/T₂
Solving for V₂, we get:
V₂ = (V₁ x T₂) / T₁
Substituting the values we have, we get:
V₂ = (2.68 x 48.0) / 24.0 = 5.36 liters
Therefore, the new volume of the balloon when heated to 48.0°C is 5.36 liters.
To know more about volume, refer
https://brainly.com/question/14197390
#SPJ11
In a head-on collision, the closest approach of a 6.24 MeV alpha particle to the center of a nucleus is 6.00 fm. The nucleus is in an atom of what element?a) Aluminumb) Lithiumc) Chlorined) Iron
In a head-on collision, the closest approach of a 6.24 MeV alpha particle to the center of a nucleus is 6.00 femtometers (fm). To determine the element of the atom involved, we can use the concept of Coulomb's law and the energy conservation principle.
Considering the attractive nuclear force and the repulsive electrostatic force, we can infer that the alpha particle's potential energy at the closest approach is equal to its initial kinetic energy. The alpha particle's charge is +2e, and the nucleus's charge is Ze, where Z is the atomic number of the element.
Using the provided information and the electrostatic potential energy formula, we can calculate the atomic number Z. Based on the calculation, the atomic number is close to 3. This corresponds to the element Lithium (Li). Therefore, the nucleus belongs to an atom of Lithium.
you know more about head-on collision pls visit-
https://brainly.com/question/31560417
#SPJ11
note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part. the bob of a simple pendulum of length l = 40 in. is released from rest when θ = 5°. Assuming simple harmonic motion, determine the magnitudes of the velocity and acceleration of the bob after the pendulum has been in motion for 1.75 s. The magnitude of the velocity of the bob after the pendulum has been in motion for 1.75 s is __________ ft/s. The magnitude of the acceleration of the bob after the pendulum has been in motion for 1.75 s is __________ ft/s2
The magnitude of the velocity of the bob after the pendulum has been in motion for 1.75 s is 3.25 ft/s. The magnitude of the acceleration of the bob after the pendulum has been in motion for 1.75 s is 33.6 ft/s2.
To determine the magnitudes of the velocity and acceleration of the bob of a simple pendulum after it has been in motion for 1.75 s, we need to use the equations of motion for a simple harmonic oscillator. The general equation for the position of a simple pendulum is given by:
θ(t) = θ0 cos(ωt + φ)
where θ0 is the amplitude of the oscillation, ω is the angular frequency, t is time, and φ is the phase constant.
In this case, we know that the pendulum is released from rest at an angle of 5°, which means that θ0 = 5°. We also know that the length of the pendulum is 40 inches, so we can use the formula for the period of a simple pendulum to find the value of ω:
T = 2π√(l/g)
where T is the period, g is the acceleration due to gravity (32.2 ft/s2), and l is the length of the pendulum. Substituting the given values, we get:
T = 2π√(40/32.2) = 2.14 s
Therefore, the angular frequency is:
ω = 2π/T = 2.94 rad/s
Now we can use the equation for the velocity of the bob at any time t:
v(t) = -ωθ0 sin(ωt + φ)
To find the velocity after 1.75 s, we need to find the value of the phase constant φ. Since the pendulum is released from rest, we know that the velocity is initially zero, which means that φ = 0. Substituting the given values, we get:
v(1.75) = -2.94(5/180) sin(2.94(1.75)) = -3.25 ft/s
Therefore, the magnitude of the velocity of the bob after the pendulum has been in motion for 1.75 s is 3.25 ft/s.
Next, we can use the equation for the acceleration of the bob at any time t:
a(t) = -ω2θ0 cos(ωt + φ)
Substituting the given values, we get:
a(1.75) = -2.942(5/180) cos(2.94(1.75)) = -33.6 ft/s2
Therefore, the magnitude of the acceleration of the bob after the pendulum has been in motion for 1.75 s is 33.6 ft/s2.
The negative sign in the equations for the velocity and acceleration indicates that the bob is moving in the opposite direction of the initial displacement (i.e., towards the equilibrium position). This is because the bob of a simple pendulum oscillates back and forth around the equilibrium position, with the displacement, velocity, and acceleration changing direction at the endpoints of each swing.
To know more about velocity, please click on:
https://brainly.com/question/18836495
#SPJ11
a college agricultural department wants to test the yields of four different varieties of timato plant that it has developed
The college agricultural department aims to test the yields of four different varieties of tomato plants that they have developed, go achieve this, they would need to conduct a controlled experiment in which they grow each variety under identical conditions for the data analysis.
This includes ensuring that the plants receive the same amount of sunlight, water, nutrients, and are subjected to the same environmental factors. To accurately compare the yields of the four varieties, the department would need to collect data on the number of tomatoes produced per plant, the weight of each tomato, and the overall weight of the yield for each variety, this would provide a clear understanding of the productivity of each type of tomato plant. The data can then be analyzed statistically to determine if there are any significant differences between the yields of the different varieties.
Furthermore, it is essential to consider other factors that may impact the productivity of the plants, such as resistance to pests and diseases, as well as their growth rate and overall hardiness. By assessing these factors, the college agricultural department can make informed decisions on which variety of tomato plant is the most suitable for further development and large-scale cultivation. In summary, through careful experimentation and data analysis, the department can effectively test and compare the yields of the four tomato plant varieties they have developed.
Learn more about controlled experiment at:
https://brainly.com/question/14839352
#SPJ11
a 4.50-kg wheel that is 34.5 cm in diameter rotates through an angle of 13.8 rad as it slows down uniformly from 22.0 rad/s to 13.5 rad/s. (a) what is the magnitude of the angular acceleration of the wheel? (b) how much time will the wheel take to come to stop from the moment with angular speed of 22.0 rad/s?
The magnitude of the angular acceleration of the wheel is 10.9 rad/s^2.
the wheel takes 2.02 seconds to come to stop from an initial angular velocity of 22.0 rad/s.
(a) We can use the formula for angular acceleration:
angular acceleration = (final angular velocity - initial angular velocity) / time taken
We are given the initial and final angular velocities, and the angle through which the wheel rotates. We need to find the time taken to slow down.
The circumference of the wheel is:
circumference = π × diameter = π × 0.345 m = 1.081 m
The distance traveled during the angular displacement of 13.8 rad is:
distance = 1.081 m × 13.8 = 14.92 m
The average angular velocity during the slowing down period is:
average angular velocity = (22.0 rad/s + 13.5 rad/s) / 2 = 17.75 rad/s
The time taken to slow down can be found using the formula:
time taken = angle of rotation / average angular velocity
time taken = 13.8 rad / 17.75 rad/s = 0.778 seconds
Therefore, the time taken to slow down is 0.778 seconds.
The angular acceleration can be found using the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time taken
angular acceleration = (13.5 rad/s - 22.0 rad/s) / 0.778 s = -10.9 rad/s^2
Therefore, the magnitude of the angular acceleration of the wheel is 10.9 rad/s^2.
(b) To find the time taken to come to stop from an initial angular velocity of 22.0 rad/s, we can use the formula:
time taken = initial angular velocity / angular acceleration
time taken = 22.0 rad/s / 10.9 rad/s^2 = 2.02 seconds
Therefore, the wheel takes 2.02 seconds to come to stop from an initial angular velocity of 22.0 rad/s.
Visit to know more about Angular velocity:-
brainly.com/question/29342095
#SPJ11
find the magnitude of the velocity (speed) of a point located at r = 20 cm from the center of the wheel after 4 s.
Assuming the point is located on the edge of a rotating wheel, we can use the formula v = rω, where v is the velocity, r is the distance from the center, and ω is the angular velocity. To find ω, we can use the formula ω = θ/t, where θ is the angle the wheel has rotated and t is the time it took.
Since the point on the edge of the wheel has traveled a distance of 2πr in one revolution, we can find θ by dividing the time by the period (the time for one revolution), which is 2π/ω. Putting it all together, we get v = rω = r(2π/ω)(ω/t) = 2πr/t. Plugging in r = 20 cm and t = 4 s, we get v = 31.4 cm/s. Therefore, the magnitude of the velocity of the point located at r = 20 cm from the center of the wheel after 4 s is 31.4 cm/s.
To find the magnitude of the velocity (speed) of a point located at r = 20 cm from the center of the wheel after 4 seconds, you'll need to use the formula v = ωr, where v is the linear velocity, ω is the angular velocity, and r is the radial distance. First, calculate the angular velocity by dividing the angle covered (in radians) by the time (in seconds). Then, multiply the angular velocity by the radial distance to get the linear velocity. Once you've found the linear velocity, you'll know the speed of the point after 4 seconds.
To know more about Velocity visit-
https://brainly.com/question/17127206
#SPJ11
one practical use of echolocation is to measure the depth of the oceans. the device that is used to transmit the sound waves to the ocean floor is called _____________. group of answer choices
One practical use of echolocation is to measure the depth of the oceans. the device that is used to transmit the sound waves to the ocean floor is called "sonar" (Sound Navigation and Ranging).
Sonar technology works by emitting sound waves into the water, which then bounce off the ocean floor or any objects in the water and return to the sonar device. By measuring the time it takes for the sound waves to travel and return, the depth of the ocean can be calculated.This device emits sound waves, which then bounce off the ocean floor and return to the surface, allowing scientists to calculate the depth based on the time it takes for the sound waves to travel back.
Sonar technology is widely used in oceanography and marine exploration to map the ocean floor, locate underwater objects, and study marine life. It has applications in various fields such as navigation, fishing, oil and gas exploration, and environmental monitoring. By using echolocation, sonar enables scientists and researchers to gather important information about the underwater environment and better understand the depths and features of the oceans.
Full Question : one practical use of echolocation is to measure the depth of the oceans. the device that is used to transmit the sound waves to the ocean floor is called _____________.
1.Sonar
2.doppler effect
3.seismometer
4.Acoustic Current Meters (ACM)
Learn more about "sonar" at https://brainly.com/question/4955683
#SPJ11
(b) what is the acceleration of gravity on the surface (or outer limit) of uranus? the mass of uranus is 8.68 1025 kg and its radius is 2.56 107 m. m/s2
The acceleration of gravity on the surface (or outer limit) of Uranus can be calculated using Newton's law of universal gravitation. The formula for acceleration due to gravity is:
g = G * (M / r^2)
where g is the acceleration of gravity, G is the gravitational constant (approximately 6.67430 × 10^-11 m^3 kg^-1 s^-2), M is the mass of Uranus, and r is the radius of Uranus.
Given:
Mass of Uranus (M) = 8.68 × 10^25 kg
Radius of Uranus (r) = 2.56 × 10^7 m
Substituting these values into the formula, we get:
g = (6.67430 × 10^-11 m^3 kg^-1 s^-2) * (8.68 × 10^25 kg) / (2.56 × 10^7 m)^2
Simplifying the expression, we find:
g ≈ 8.87 m/s^2
Therefore, the acceleration of gravity on the surface (or outer limit) of Uranus is approximately 8.87 m/s^2.
Learn more about acceleration of gravity here:
https://brainly.com/question/28811174
#SPJ11
A child holds a sled on a frictionless, snowcovered hill, inclined at an angle of 29◦
. If the sled weighs 82 N, find the force exerted on the rope by the child.
Answer in units of N.
The force exerted on the rope by the child is 71.8 N.
Weight of the sled holding by the child, W = 82 N
Angle of inclination, θ = 29°
The component of weight acting downwards,
Wx = mg sinθ
Wx = 82 x sin 29°
Wx = 82 x 0.485
Wx = 39.8 N
Given that the surface of the hill is frictionless. So, the force of friction will be zero.
Therefore, force exerted on the rope by the child,
F = mg cosθ
F = 82 cos29°
F = 82 x 0.875
F = 71.8
To learn more about force, click:
https://brainly.com/question/14514652
#SPJ1
a capacitor has charge 30nc and capacitance equal to 10nf (remember nano is 10^(-9)). what is the energy stored in this capacitor?
The energy stored in a capacitor is given by the formula:
E = 1/2 * C * V^2
where E is the energy stored, C is the capacitance, and V is the voltage across the capacitor.
First, we need to find the voltage across the capacitor. We know that the charge on the capacitor is 30 nC (nano Coulombs), and the capacitance is 10 nF (nano Farads). The voltage can be found using the formula:
Q = C * V
where Q is the charge and V is the voltage.
Substituting the given values, we get:
30 nC = 10 nF * V
V = 3 volts
Now, we can find the energy stored in the capacitor using the formula:
E = 1/2 * C * V^2
Substituting the values of C and V, we get:
E = 1/2 * 10 nF * (3 volts)^2
E = 45 nJ (nano Joules)
Therefore, the energy stored in the capacitor is 45 nano Joules. This energy represents the work done in charging the capacitor and is stored in the electric field between the plates of the capacitor. The energy can be released when the capacitor is discharged.
you know more about energy stored in a capacitor pls visit-
https://brainly.com/question/15057970
#SPJ11
suppose you put the spring scale shown in figure 6.9 on the floor of an elevator. when the elevator is not moving, you place an object on the scale and the scale reads 1 n. if the elevator starts to accelerate upwards. how will the reading on the scale change?
When the elevator starts to accelerate upwards, the reading on the spring scale will increase from the initial reading of 1 N. This increase is due to the additional force experienced by the object on the scale as a result of the elevator's upward acceleration.
In an accelerating elevator, there are two forces acting on the object placed on the scale: the force due to gravity (its weight) and the force due to the elevator's upward acceleration. These forces combine to determine the net force on the object.
When the elevator is not moving, the scale reads 1 N, which represents the object's weight (equal to its mass multiplied by the acceleration due to gravity). Let's assume the object's mass is 'm' kg, and the acceleration due to gravity is 'g' m/s^2.
Weight = m * g
Now, when the elevator starts to accelerate upwards, there will be an additional force acting on the object, which is equal to the mass of the object multiplied by the elevator's acceleration. Let's denote the elevator's acceleration as 'a' m/s^2.
Additional force = m * a
The net force acting on the object will be the sum of its weight and the additional force:
Net force = Weight + Additional force
= m * g + m * a
Since force is directly proportional to the reading on the scale, the reading on the scale will be equal to the net force acting on the object.
Therefore, the new reading on the scale will be:
Reading on scale = Net force
= m * g + m * a
Since the elevator is accelerating upwards, the elevator's acceleration (a) will be greater than zero. As a result, the reading on the scale will be greater than the initial 1 N reading when the elevator was at rest.
Learn more about Net force : brainly.com/question/30851640
#SPJ11
Which of the following statements is false with respect to the standard mileage rate?a. The standard mileage rate cannot be used on a taxi.b. The standard mileage rate encompasses depreciation.c. The taxpayer can have an unlimited number of autos and use the mileage rate.d. Section 179 cannot be used on a standard mileage rate auto.
Option (c) is false with respect to the standard mileage rate.
How is the standard mileage rate limited?The false statement regarding the standard mileage rate is option (c), which states that the taxpayer can have an unlimited number of autos and use the mileage rate. In reality, there are limitations on the number of autos that can utilize the standard mileage rate.
The IRS sets specific guidelines, and as of the 2021 tax year, the maximum number of vehicles allowed for the standard mileage rate is limited to five autos, vans, or trucks. Any additional vehicles beyond this limit must be accounted for using actual expenses rather than the standard mileage rate.
Therefore, option (c) inaccurately suggests an unlimited number of autos can utilize the mileage rate.
Learn more about mileage rate
brainly.com/question/30167141
#SPJ11
Which form of energy does not require matter for traveling through space?
A. electrical
B. chemical
C. radiant
D. mechanical
The form of energy that does not require matter for traveling through space is radiant energy. Radiant energy is the energy carried by electromagnetic waves, such as visible light, infrared radiation, ultraviolet radiation, radio waves, microwaves, and X-rays. Unlike other forms of energy, radiant energy does not require a physical medium, such as matter, to propagate.
Radiant energy can travel through the vacuum of space, where there is no air or matter present. This property allows radiant energy to travel vast distances from its source, such as the Sun, to reach other celestial bodies or to be detected by instruments like telescopes. It is this characteristic of radiant energy that allows us to receive light from distant stars and galaxies, as well as to utilize various technologies based on electromagnetic waves, including wireless communication and satellite-based systems.
Therefore, the correct answer is C. radiant.
To know more about chemical please visit:
https://brainly.com/question/29240183
#SPJ11
if you traveled straight through the center of the earth and out the other side, what would you pass through along the way?
If you traveled straight through the center of the earth and out the other side, you would pass through Earth's crust along the way
What happens if you go to the Earth's center?
It is impossible to reach the Earth's center and remain alive. Anyone who were to find themselves at the Earth's core, which is approximately 9,000°F hotter than the surface of the sun, would be instantly burned. The pressure is another factor that would crush you; it can be around three million times more than on the surface of the Earth.
The deepest hole that has yet been dug to directly measure temperature (or other physical parameters) is only around 10 kilometers (six miles) below the surface of the earth, which is 6,400 kilometers (4,000 miles) below our feet.
To learn more about temperature use:
https://brainly.com/question/26866637
#SPJ4
a 3.5 kg ball falls from a height of 12 meters how fast is it traveling when still 5 meters off the ground show your work
According to the information, the ball is traveling at a speed of 12.71 m/s when it is still 5 meters off the ground.
How to calculate how fast is it traveling when still 5 meter off the ground?To calculate how fast it is traveling the ball when is 5 meter off the ground we can use the conservation of energy principle to solve this problem.
So, the initial height of 12 meters, the ball has potential energy which is converted to kinetic energy when it falls. At a height of 5 meters, the ball has lost some potential energy but gained kinetic energy.
According to the above, we can set the potential energy at the initial height equal to the sum of the potential energy at the height of 5 meters and the kinetic energy at that point.
The potential energy of the ball at a height of 12 meters is:
[tex]PE = mgh = 3.5 kg * 9.81 m/s^2 * 12 m = 411.84 J[/tex]
At a height of 5 meters, the potential energy of the ball is:
[tex]PE = mgh = 3.5 kg * 9.81 m/s^2 * 5 m = 171.5 J[/tex]
Therefore, the kinetic energy of the ball at a height of 5 meters is:
[tex]KE = PE(initial) - PE(final) = 411.84 J - 171.5 J = 240.34 J[/tex]
The kinetic energy of the ball is also equal to (1/2)mv^2, where v is the velocity of the ball. Solving for v, we get:
[tex]v = \sqrt{x} ((2KE)/m) = \sqrt((2 * 240.34 J)/(3.5 kg)) = 12.71 m/s[/tex]
So, the ball is traveling at a speed of 12.71 m/s when it is still 5 meters off the ground.
Learn more about speed in: https://brainly.com/question/17661499
#SPJ1
Jane waits on a railroad platform, while two trains approach from the same direction at equal speeds of 12. 3 m/s. Both trains are blowing their whistles (which have the same frequency), and one train is some distance behind the other. After the first train passes jane, but before the second train passes her, she hears beats of frequency 5. 57 hz. What is the frequency of the train whistles? the velocity of sound is 343 m/s. Answer in units of hz
Explanation:
socks up his told was to pull he
light travels up through a pond of water of critical angle 49 degrees.what happens at the surface if the angle is 60 degrees
When light travels from a medium with a better refractive record (such as water) to a medium with a lower refractive record (such as air), it can experience a wonder called total internal reflection. This happens when the point of frequency of the light at the boundary between the two media surpasses a critical point.
What happens at the surface if the angle is 60 degrees?Within the given situation, if the angle of incidence of the light at the water-air interface is 60 degrees, and the critical angle for water is 49 degrees, at that point the light will not undergo total inside reflection. Instep, it'll refract (twist) because it crosses the boundary and enters the air. The precise sum of refraction will depend on the point of frequency and the refractive lists of water and air.
Hence, since the angle of incidence(60 degrees) is more noteworthy than the critical angle (49 degrees), the light will pass from water into air and proceed its way within the air medium, possibly refracting absent from the typical line (the line opposite to the surface of the water). It'll not be reflected back into the water due to internal reflection.
Learn more about reflection from
https://brainly.com/question/18772331
#SPJ1
Calculate the amount of electric force between two doughnuts if one doughnut has a charge q1 of 0.002 Coulombs and the other has a charge q2 of 0.0015 Coulombs, and they are separated by a distance of 0.3 meters? What would the electric force be between the same two donuts if the charge of q1 was tripled and everything else was held constant? What would the electric force be between the same two donuts if the distance between the two doughnuts was doubled?
The electrical force between the doughnuts would decrease by a factor of 4 to 3.75 N.
The electric force between two charges is given by Coulomb's law:
F = k q₁ q₂ / r²
where F is the force in Newtons, k is Coulomb's constant (k = 9 x 10^9 N*m²/C²), q₁ and q₂ are the charges in Coulombs, and r is the distance between the charges in meters.
Using the given values, the electric force between the two doughnuts is:
F = (9 x 10⁹) * 0.002 * 0.0015 / (0.3)² = 15 N
If the charge of q1 is tripled while everything else is held constant, the new force would be:
F' = (9 x 10⁹) * (3*0.002) * 0.0015 / (0.3)² = 45 N
So the electric force between the doughnuts would triple to 45 N.
If the distance between the two doughnuts is doubled while everything else is held constant, the new force would be:
F'' = (9 x 10⁹) * 0.002 * 0.0015 / (0.6)² = 3.75 N
So the electric force between the doughnuts is decrease by a factor of 4 to 3.75 N.
To know more about electrical force
https://brainly.com/question/9672981
#SPJ1
find the value of θ at which the slotted cylinder of mass m will begin to slip. the coefficient of static friction between the cylinder and the surface is μ.
θ = arctan(μ) The value of θ at which the slotted cylinder of mass m will begin to slip is given by the arctan of the coefficient of static friction (μ).
This is because the angle of inclination (θ) at which the force of gravity acting on the cylinder becomes greater than the force of static friction holding it in place determines the point at which the cylinder will start to slip.
When θ is less than or equal to arctan(μ), the force of gravity acting on the cylinder is balanced by the force of static friction, and the cylinder remains stationary. However, when θ exceeds arctan(μ), the force of gravity becomes greater than the force of static friction, and the cylinder begins to slide down the incline.
It is important to note that this calculation assumes that the surface is rough enough to provide enough static friction to prevent slipping up to this angle. If the surface is too smooth, or if there is not enough static friction, the cylinder may begin to slip at an angle lower than arctan(μ).
learn more about friction here:
https://brainly.com/question/13000653
#SPJ11
Which of the following is true about water? A. Water is one of the few substances whose liquid is denser than its solid. B. If you apply pressure to a small area on an ice cube, some of the ice can melt without increasing in temperature. C. If you have two identical samples of water, one at 25C and one at 90C, and quickly lower the temperature the 90C water will freeze faster. D. A and B are both correct. E. A, B, and C are all correct.
The correct statement about water is water is one of the few substances whose liquid is denser than its solid, if you apply pressure to a small area on an ice cube, some of the ice can melt without increasing in temperature. The correct option to this question is D.
A. Water is one of the few substances whose liquid is denser than its solid. This statement is true because, unlike most substances, the density of water decreases as it freezes.
This unique property is due to the hydrogen bonds within the water molecules that create a hexagonal lattice structure in ice, making it less dense than liquid water.
B. If you apply pressure to a small area on an ice cube, some of the ice can melt without increasing in temperature. This statement is also true and is known as the phenomenon of "pressure melting." When pressure is applied to ice, the melting point decreases, and the ice melts without requiring an increase in temperature.
C. If you have two identical samples of water, one at 25C and one at 90C, and quickly lower the temperature the 90C water will freeze faster. This statement is not necessarily true.
While the Mpemba effect suggests that warmer water can freeze faster than cooler water under certain conditions, it is not a consistent phenomenon, and several factors can influence the freezing rate, such as evaporation and convection.
Based on the explanation, options A and B are both correct, making option D the accurate answer.
For more information on water kindly visit to
https://brainly.com/question/15696906
#SPJ11
a merry-go-round rotates from rest with an angular accel- eration of 1.50 rad/s2 . how long does it take to rotate through (a) the first 2.00 rev and (b) the next 2.00 rev?
a) It takes approximately 3.02 s to rotate through the first 2.00 revolutions.
b) It takes approximately 4.23 s to rotate through the next 2.00 revolutions.
We can use the following equations to solve this problem:
For rotational motion from rest, the equation is:
[tex]θ = (1/2) α t^2[/tex]
where θ is the angular displacement, α is the angular acceleration, and t is the time.
The number of revolutions is related to the angular displacement by:
θ = 2πn
where n is the number of revolutions.
(a) For the first 2.00 revolutions:
The angular displacement is:
θ = 2πn = 2π(2.00) = 12.57 rad
The time taken can be found using the equation:
[tex]θ = (1/2) α t^2[/tex]
Rearranging this equation to solve for time, we get:
t = √(2θ/α)
Substituting the values we get:
t = √(2(12.57)/1.50) = 3.02 s (to two significant figures)
Therefore, it takes approximately 3.02 s to rotate through the first 2.00 revolutions.
(b) For the next 2.00 revolutions:
The angular displacement is:
θ = 2πn = 2π(4.00) = 25.13 rad
Using the same equation as above, we get:
t = √(2θ/α) = √(2(25.13)/1.50) = 4.23 s (to two significant figures)
Therefore, it takes approximately 4.23 s to rotate through the next 2.00 revolutions.
learn more about angular displacement
https://brainly.com/question/31327129
#SPJ4