The mass of magnesium carbonate originally used was 2.108 g.
To solve this problem, we need to use stoichiometry and the concept of molarity. We know that the excess acid was neutralized by 25.0 ml of 0.5 mol L-1 Na2CO3 solution. This means that the amount of acid that reacted with the magnesium carbonate is equal to the amount of Na2CO3 in the solution.
First, let's calculate the amount of Na2CO3 in the solution:
0.5 mol L-1 x 0.025 L = 0.0125 mol Na2CO3
Since magnesium carbonate reacts with two moles of acid per mole of MgCO3, the amount of acid that reacted with the MgCO3 is twice the amount of Na2CO3:
0.0125 mol Na2CO3 x 2 = 0.025 mol H+
Now we can use the molarity of the acid to calculate the volume of acid that reacted with the MgCO3:
0.025 mol H+ / 0.1 mol L-1 = 0.25 L
Finally, we can use the volume of acid and the molarity of the acid to calculate the amount of MgCO3 that was originally used:
0.25 L x 0.1 mol L-1 = 0.025 mol MgCO3
To convert moles to mass, we need to use the molar mass of MgCO3:
0.025 mol x 84.31 g mol-1 = 2.108 g
Learn more about magnesium carbonate here: brainly.com/question/14954996
#SPJ11
what is the concentration in molarity of a solution made by dissolving 20.0 grams of koh in 150.0 ml of h2o (molar mass of koh
The concentration in molarity of the solution is 2.72 M.
To calculate the molarity of the solution, we need to first calculate the number of moles of KOH present in the solution.
Number of moles of KOH = mass of KOH / molar mass of KOH= 20.0 g / 56.11 g/mol= 0.356 molNext, we need to calculate the volume of the solution in liters.
Volume of the solution = 150.0 mL = 0.150 LFinally, we can calculate the molarity of the solution using the formula:
Molarity = number of moles / volume of solution in litersMolarity = 0.356 mol / 0.150 LMolarity = 2.72 MTherefore, the concentration in molarity of the solution made by dissolving 20.0 grams of KOH in 150.0 mL of H2O is 2.72 M.
To learn more about molarity of the solution, here
https://brainly.com/question/16587536
#SPJ4
explain how ice crystals first form in a cold cloud. describe two mechanisms by which ice crystals can then grow to the size of precipitating particles.
Ice crystals can form in a cold cloud through a process known as homogeneous nucleation. In this process, water molecules in the cloud collide with each other and form clusters.Once ice crystals are formed, they can grow in size through two mechanisms:
Deposition: This process involves the direct conversion of water vapor into ice crystals. As water vapor comes into contact with the surface of the ice crystal, it freezes and adds to the crystal's mass. This process is more efficient at colder temperatures and at higher altitudes, where there is less water vapor in the air.
Accretion: This process involves the collision of ice crystals with supercooled water droplets. Supercooled water droplets are liquid droplets that remain in a liquid state even at temperatures below freezing due to the absence of a nucleation site. When these droplets come into contact with an ice crystal, they can freeze instantly and become attached to the crystal's surface, leading to the growth of the ice crystal.As ice crystals continue to grow through deposition and accretion, they can eventually become large enough to fall from the cloud and reach the ground as precipitation, such as snow or hail. The size and shape of the ice crystals and their growth mechanisms can also affect the type of precipitation that is produced, such as the difference between snow and SLEET.
Learn more about crystals
https://brainly.com/question/13008800
#SPJ11
naoh is a hygroscopic solid, which means that it can absorb water from its surroundings, therefore it is important to
As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.
NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.
This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.
By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.
To learn more about : water
https://brainly.com/question/19491767
#SPJ11
the pka values for some indicators are given below. which of the indicators listed would be suitable for a titration with a ph of 2.97 at the equivalence point?
A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO. What is the initial pH of this solution?
A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO
Part A: The initial pH of this solution is 7.39Part B: The pH after addition of 150.0 mg of HBr is 7.29Part C: The pH after addition of 85.0 mg of NaOH is 7.51The pH of a solution gives a measure of the concentration of hydronium ions in the solution, and therefore, indicates the level of acidity or basicity of the solution.
We have a buffer solution made of 0.175 M HClO and 0.150 M NaClO
Part A :
pH of buffer solution can be calculated using equation, which is given below
pH = pKa + log [ Base]/[Acid]
We have [acid] = [ HClO] = 0.175 M
[Base] = [NaClO] = 0.150 M
Ka of HClO is 3.5 x 10⁻⁸ ( Note : Ka value is taken from online resource. Please check the value given to you and make the changes accordingly)
pKa = - log ( Ka)
pKa = - log ( 3.5 x 10⁻⁸)
pKa = 7.46
pH = 7.46 + log ( 0.150/0.175)
pH = 7.46 + ( -0.0669)
pH = 7.39
Part B:
When we add HBr to this buffer, basic component of buffer which is NaClO would try to neutralize effect of acid HBr.
Let's write the reaction that takes place here
HBr + NaClO -------------> HClO + NaBr
Let's find moles of HBr , HClO and NaClO we have
mol HBr = 150 mg HBr x 1 g/1000 mg x 1mol / 80.9 g = 0.00185 mol
mol NaClO = 100 mL x 1 L/1000 mL x 0.150 mol/L = 0.015 mol
mol HClO = 100 mL x 1 L/1000 mL x 0.175 mol/L = 0.0175 mol
pH = 7.46 + log ( 0.01315/0.01935) ( Note : we can use mole values instead of concentration terms in this case)
pH = 7.46 + (-0.1678)
pH = 7.29
Part C:
When NaOH is added to the buffer, acidic component , HClO of the buffer tries to neutralize its effect.
The reaction given below
NaOH + HClO -----> NaClO + H2O
mol NaOH = 85 mg NaOH x 1 g/1000 g x 1 mol/40 g = 0.002125 mol
Equilibrium mol of base NaClO = 0.0171 and acid , HClO= 0.0154
pH = 7.46 + log ( 0.0171/0.0154)
pH = 7.46 + 0.0455
pH = 7.51.
Learn more about pH of the solution:
https://brainly.com/question/29323762
#SPJ4
Complete question:
1) A 100.0-mL buffer solution is 0.175 M in HClO and 0.150 M in NaClO.
Part A: What is the initial pH of this solution?
Part B: What is the pH after addition of 150.0 mg of HBr?
Part C: What is the pH after addition of 85.0 mg of NaOH?
To determine the initial pH of the buffer solution, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([base]/[acid])
where pKa is the dissociation constant of the weak acid (HClO), [base] is the concentration of the conjugate base (ClO-), and [acid] is the concentration of the weak acid (HClO).
First, we need to calculate the pKa of HClO. The Ka of HClO is 3.0 x 10^-8, so the pKa is:
pKa = -log(Ka) = -log(3.0 x 10^-8) = 7.52
Next, we can plug in the concentrations of HClO and NaClO into the Henderson-Hasselbalch equation:
pH = 7.52 + log(0.150/0.175)
pH = 7.52 - 0.080
pH = 7.44
Therefore, the initial pH of the buffer solution is 7.44.
Visit here to learn more about buffer solution : https://brainly.com/question/24262133
#SPJ11
which term is defined as a pollutant that is formed by a chemical reaction between a primary pollutant and another compound in the atmosphere (either natural or human-made)
The term defined as a pollutant that is formed by a chemical reaction between a primary pollutant and another compound in the atmosphere (either natural or human-made) is "secondary pollutant".
Primary pollutants are directly emitted into the atmosphere from sources such as cars, factories, and power plants. Examples of primary pollutants include carbon monoxide (CO), sulfur dioxide (SO₂), and nitrogen oxides (NOₓ).
Secondary pollutants, on the other hand, are not directly emitted into the atmosphere, but are formed through chemical reactions between primary pollutants and other compounds in the atmosphere. Examples of secondary pollutants include ground-level ozone (O₃), which is formed through the reaction of NOₓ and volatile organic compounds (VOCs), and acid rain, which is formed through the reaction of SO₂ and NOₓ with water, oxygen, and other chemicals in the atmosphere.
The formation of secondary pollutants is often dependent on factors such as temperature, sunlight, and the presence of other chemicals in the atmosphere. Secondary pollutants can be just as harmful to human health and the environment as primary pollutants, and are an important consideration in air pollution control strategies.
To learn more about pollutants, here
https://brainly.com/question/28519286
#SPJ4
If we want to create more heat, which side of the system (reactants or products) do we want to shift the system towards? Would we classify the above equation as an endo or exothermic reaction?
Answer: exothermic reaction
Explanation: To create more heat, shift to the product side with the exothermic reaction. An exothermic reaction produces heat. The equation is:
N2(g) + 3H2(g) <-> 2NH3(g) + heat. It's exothermic because heat is a product.
Explain why the substances in a suspension would eventually settle/separate after being mixed but a colloid would not.
A suspension is a heterogeneous mixture in which particles are dispersed throughout a liquid or gas medium, but they are large enough to eventually settle or separate over time due to gravity or other external forces. In contrast, a colloid is a type of mixture in which particles are dispersed evenly throughout a medium, but they are small enough to remain suspended indefinitely due to the Brownian motion of the surrounding liquid or gas molecules.
The particles in a suspension are usually much larger and heavier than those in a colloid, and they are not held in place by any sort of intermolecular or electrostatic forces. Therefore, they are more susceptible to settling or separating out of the mixture over time. In addition, the particles in a suspension can be easily separated from the liquid or gas medium by filtration or sedimentation, which is not possible with colloids.
On the other hand, the particles in a colloid are small enough to be affected by Brownian motion, which is the random movement of molecules in the surrounding liquid or gas. This constant movement keeps the particles in suspension, preventing them from settling or separating out of the mixture. Furthermore, colloids can exhibit some unique properties, such as Tyndall scattering or the ability to pass through a semipermeable membrane, that distinguish them from both solutions and suspensions.
high quality charcoal that is light weight and easily broken is made from ______. multiple choice question.
High quality charcoal that is lightweight and easily broken is made from hardwoods such as oak, maple, and hickory.
Charcoal is a porous, black, carbon-rich material that is produced by heating organic matter (such as wood or coconut shells) in the absence of air. The quality of charcoal can vary depending on the type of organic matter used, as well as the production method.
High quality charcoal that is lightweight and easily broken is typically made from hardwoods such as oak, maple, and hickory. These woods have a high density and a low moisture content, which makes them ideal for producing charcoal with a high carbon content and low ash content. In addition, the heating process used to produce this type of charcoal is typically done at high temperatures for a short period of time, which helps to remove impurities and create a more porous and lightweight material.
Overall, the type of organic matter used and the production method are important factors in determining the quality of charcoal, with hardwoods being a common choice for producing high quality charcoal that is lightweight and easily broken.
To learn more about High quality charcoal, here
https://brainly.com/question/19402908
#SPJ4
Please help!!!! Quick please!!
4. The number of each Race Car Part present in Container A are:
Body (B) - 3Cylinder (Cy) - 10Engine (E) - 2Tire (Tr) - 9How to determine number of race cars?5. To draw the maximum number of cars that can be made from the parts in Container A:
Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).
We have 3 Bodies (B), 10 Cylinders (Cy), 2 Engines (E), and 9 Tires (Tr).
The limiting parts are the Engines (E) and the Cylinders (Cy), since we don't have enough of either part to build more than 2 cars.
Therefore, we can build a maximum of 2 complete cars from the parts in Container A, and we will have excess parts remaining:
1 Body (B)
6 Tires (Tr)
0 Engines (E)
6 Cylinders (Cy)
6. The student is incorrect because although there are 3 car bodies in Container A, we also need 4 tires, 1 engine, and 2 cylinders for each car. We don't have enough engines or cylinders to build 3 complete cars, so the number of bodies is not the limiting factor.
7. a. To determine the number of complete cars that can be built:
Each car requires 1 Body (B), 4 Tires (Tr), 1 Engine (E), and 2 Cylinders (Cy).
We have a large number of Bodies (B) and Tires (Tr), so we don't need to worry about those parts.
We only have 5 Engines (E) and 12 Cylinders (Cy).
The limiting part is the Cylinders (Cy), since each car requires 2 cylinders and we only have 12.
Therefore, we can build a maximum of 6 complete cars with the available parts:
6 Bodies (B)
24 Tires (Tr)
5 Engines (E)
12 Cylinders (Cy)
b. The limiting part is the Cylinders (Cy), since we only have enough cylinders to build 6 cars, but we have enough engines to build 5 times as many cars.
Find out more on limiting reagents here: https://brainly.com/question/19033878
#SPJ1
Explain how Avogadro’s number can give two conversion factors
Answer: NA = no of molecules / no of moles
NA = no of molecules × molecular weight /weight
Explanation:
examine this bowen's reaction series diagram. if a rock contains amphibole, potassium feldspar, and quartz, and the rock is heated, which mineral would melt first?
The Bowen's reaction series diagram is a representation of the order in which minerals crystallize as magma cools. The minerals that crystallize first are the ones with the highest melting temperatures, while those that crystallize last have the lowest melting temperatures.
In the case of the rock containing amphibole, potassium feldspar, and quartz, the mineral that would melt first upon heating would be quartz. This is because quartz is the mineral with the lowest melting temperature among the three. Amphibole and potassium feldspar have higher melting temperatures and would not melt until the temperature is raised significantly higher.
It is important to note that heating a rock containing these minerals would not necessarily cause them to melt completely. Instead, they may undergo partial melting, leading to the formation of new minerals with different compositions.
To know more about Bowen's reaction series:
https://brainly.com/question/13431170
#SPJ11
Bowen's reaction series is a diagram that shows the order in which minerals crystallize from a magma as it cools. The minerals on the left side of the diagram crystallize at higher temperatures, while those on the right side crystallize at lower temperatures.
In this case, the rock contains amphibole, potassium feldspar, and quartz. According to Bowen's reaction series, amphibole and potassium feldspar crystallize at higher temperatures than quartz. Therefore, if the rock is heated, quartz would melt first because it is the mineral that crystallizes at the lowest temperature.
Heating a rock causes the minerals to break down or transform, depending on the temperature and other conditions. The exact temperature at which a mineral melts depends on its composition, but in general, minerals that crystallize at higher temperatures require more energy to melt.
In this case, if the rock is heated to a temperature that is high enough to melt quartz, then the amphibole and potassium feldspar would still be solid. If the temperature is further increased, the amphibole and potassium feldspar would also melt at higher temperatures.
In summary, if a rock contains amphibole, potassium feldspar, and quartz, and the rock is heated, quartz would melt first because it is the mineral that crystallizes at the lowest temperature according to Bowen's reaction series.
Learn more about quartz here:
https://brainly.com/question/12822959
#SPJ11
a 1.25 g sample of co2 is contained in a 750. ml flask at 22.5 c. what is the pressure of the gas, in atm?
The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.
Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.
Using the ideal gas law equation the pressure is found to be 1.05 atm.
To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:
[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:
[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.
Learn more about ideal gas law equation here:
https://brainly.com/question/15379358
#SPJ11
energetic molecules such as nadh and atp are often reactants of ____________ reactions.
Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.
Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.
Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.
To learn more about Exergonic reactions
https://brainly.com/question/30800156
#SPJ4
group 1 cations precipitate easily in a relatively high concentration of hydrochloric acid. after the separation from the other group 1 cations, the presence of lead can be tested by addition of potassium chromate. explain what is wrong with the given equation for this test.
The given equation for testing the presence of lead cations (Pb) using potassium chromate (K₂CrO₄) is incorrect. The correct equation is Pb(aq) + K₂CrO₄(aq) ⇒ PbCrO4(s) + 2K+(aq).
The incorrect equation, Pb(aq) + CrO₄(aq) ⇔ PbCrO(aq), is incorrect because it does not take into account the charge balance of the species involved in the reaction. In the correct equation, two potassium ions (2K+) are formed as counter ions to balance the charge on the lead chromate (PbCrO₄) precipitate.
In addition, the incorrect equation refers to PbCrO(aq), which implies that lead chromate is in a dissolved state. However, lead chromate is highly insoluble in water and precipitates as a yellow solid. Therefore, the correct equation includes the formation of a solid precipitate of lead chromate.
To learn more about chromate follow the link:
https://brainly.com/question/31107847
#SPJ4
The complete question is:
Group 1 cations precipitate easily in a relatively high concentration of hydrochloric acid. After the separation from the other group 1 cations, the presence of lead can be tested by addition of potassium chromate. Explain what is wrong with the given equation for this test. Pb(aq) + CrO₄(aq) ⇔ PbCrO(aq)
s dated using uranium 235 hal life 704,000,000years and it has to be 1/4 the original ammmount of uranium. how old is thee sample?
The sample is approximately 1,408,000,000 years old.
The half-life of uranium-235 is 704,000,000 years, which means that every 704,000,000 years, the amount of uranium-235 in a sample will be reduced to half of its original amount.
If a sample of uranium-235 has to be reduced to 1/4 of its original amount, it means that it has undergone two half-lives because:
- After one half-life, the amount of uranium-235 remaining is 1/2 of the original amount.
- After two half-lives, the amount of uranium-235 remaining is 1/2 x 1/2 = 1/4 of the original amount.
Therefore, the age of the sample can be calculated by multiplying the half-life of uranium-235 by the number of half-lives that have occurred:
Age of sample = Half-life of uranium-235 x Number of half-lives
Age of sample = 704,000,000 years x 2
Age of sample = 1,408,000,000 years
Therefore, the sample is approximately 1,408,000,000 years old.
Visit to know more about Sample:-
brainly.com/question/24466382
#SPJ11
A team of botanists conducted an experiment
investigating the effect of pH on plant growth.
The height of the plant was measured three weeks
after planting.
1
?
3.
Based on the data they collected, what is the
optimal pH for growing basil? Explain your
answer.
Based on the data they collected, which
plant fares better than the others in low pH
environments? Explain your answer.
At which pH is there the greatest difference
between the heights of parsley and basil?
What is the height difference at that pH?
The outcomes to the scan had been now not all similar. The pots with the pH of 5.0 had no growth whatsoever. The pots with the pH of 6.0 had little growth, each with only four blades of grass. The pots with a pH of 7.0 grew well, one pot with extra blades of grass than the other, an average of 11 blades of grass
What are the elements that affect the pH of a plant environment?Natural soil pH depends on the rock from which the soil was once fashioned (parent material) and the weathering procedures that acted on it—for instance climate, vegetation, topography and time. These approaches have a tendency to purpose a decreasing of pH (increase in acidity) over time.
There is disruption of nutrient absorption by way of the plants if it's pH increases, and hence, soil fertility is reduced, alkaline soil's pH does not lead to make bigger in nutrient absorption, soil illness does not happen.
Learn more about effect of pH on plant growth here:
https://brainly.com/question/31459436#SPJ1what mass of cu(s) is electroplated by running 23.0 a of current through a cu2 (aq) solution for 4.00 h ? express your answer to three significant figures and include the appropriate units.
Electrolysis is a process that is used to electric current is passed in a solution. The mass of cu(s) is electroplated by running 23.0 a of current through a cu2 (aq) solution for 4.00 h is equals to 64 grams.
Electrolysis is a process in which an electric current is passed in a solution. Solving electrolysis problem is more on stoichiometric calculations are, coulombs = amperes x time
1 Faraday = 96,485 coulombs
1 Faraday = 1 mole of electrons
We have to determine the mass of cu(s) is electroplated by running 23.0 a of current through a Cu (aq) solution for 4.00 h. Half reaction, [tex]Cu^{2+ } + 2e^{-} --> Cu[/tex]
Current, I = 23.0 A
Time, t = 4 hours = 4 × 3600 seconds
= 14400 seconds
Calculate the moles of Copper, n=Q ×z× F
where, Q = total charge in coulombs
F = Faraday constant = 96485 per molez = the number of electrons in the half-cell reaction = 2Computing for Q = 13.5coulomb sec (14,400 sec) = 194,400 coulomb-sec²
So, n = 194,400 coulomb-s² /(96485 coulomb)
= 1.007 moles Cu
Molar mass = 63.55 grams per mole
Molar mass is defined as the mass of substance divided by moles of substance.
=> 63.55 grams per mole = m/ 1.007 moles Cu
=> m = 63.55 g × 1.007
=> m = 64 grams
Hence, required value is 64 grams.
For more information about electrolysis, refer:
https://brainly.com/question/24063038
#SPJ4
The body is capable of manufacturing all of the amino acids it needs but it must have sufficient energy to be able to do so.True or False
The body is capable of producing all of the amino acids it need, but it must have enough energy to do so. False
The body is capable of producing some of the amino acids it needs, but there are nine essential amino acids that it cannot make and must be obtained from the diet. Histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine are among the necessary amino acids.
The body also requires energy to synthesize non-essential amino acids, and if there is insufficient energy, the body may not be able to produce enough of these amino acids. Therefore, both dietary intake and energy availability are important for optimal amino acid production and overall health.
Learn more about amino acids
https://brainly.com/question/14583479
#SPJ4
The statement "The body is capable of manufacturing all of the amino acids it needs but it must have sufficient energy to be able to do so. " is False.
The body is capable of producing some of the amino acids it needs, but there are nine essential amino acids that it cannot make and must be obtained from the diet. These essential amino acids include histidine, isoleucine, leucine, lysine, methionine, phenylalanine, threonine, tryptophan, and valine.
The body also requires energy to synthesize non-essential amino acids, and if there is insufficient energy, the body may not be able to produce enough of these amino acids. Therefore, both dietary intake and energy availability are important for optimal amino acid production and overall health.
For more such questions on amino acids
https://brainly.com/question/30265108
#SPJ11
2) 1 The particles of a substance gain energy and change from a regular
ordered structure to a disordered structure with large distances between
the particles.
Which change of state is described?
A boiling
B evaporation
C melting
D sublimation
The change of state described is melting (option C). In melting, the particles of a substance gain energy and change from a regular ordered structure to a disordered structure with large distances between the particles, which results in the substance changing from a solid to a liquid state.
What is meant by the term 'melting'?Melting is a physical process in which a substance changes from its solid state to its liquid state. It occurs when a solid substance absorbs enough heat energy to overcome the forces of attraction between its particles, causing the particles to move faster and become less ordered.
As a result, the substance loses its definite shape and takes the shape of the container in which it is placed, while retaining its volume. The temperature at which a substance melts is known as its melting point.
An example of melting is the melting of ice. At the melting point of water, which is 0°C (32°F) at standard pressure, ice changes from its solid state to its liquid state. The resulting liquid water takes the shape of its container, such as a glass, but still has the same volume as the ice from which it was melted.
Learn more about melting here:
https://brainly.com/question/15873508
#SPJ9
Send HELP!!!!!!!!!!!!!!!!!!!
The enthalpy of the reactions include:
(a) 1613 kJ/mol(b) 1613 kJ/mol(c) -276 kJ/mol(d) -1296 kJ/mol(e) -203 kJ/molHow to calculate enthalpy?Using the heat of formation values listed below:
ΔHf°(Si) = 0 kJ/mol
ΔHf°(SiF₄) = -1613 kJ/mol
ΔHf°(F₂) = 0 kJ/mol
ΔHf°(H₂O) = -286 kJ/mol
ΔHf°(SO) = 248 kJ/mol
ΔHf°(H₂SO₄) = -814 kJ/mol
ΔHf°(KOH) = -424 kJ/mol
ΔHf°(K₂O₂) = -496 kJ/mol
ΔHf°(O₂) = 0 kJ/mol
ΔHf°(Fe₃O₄) = -1118 kJ/mol
ΔHf°(HCl) = -92 kJ/mol
ΔHf°(FeCl₂) = -341 kJ/mol
ΔHf°(FeCl₃) = -399 kJ/mol
The enthalpy of each reaction is:
(a) ΔH°rxn = [ΔHf°(Si) + 2ΔHf°(F₂)] - ΔHf°(SiF₄)
ΔH°rxn = [0 + 2(0)] - (-1613) kJ/mol
ΔH°rxn = 1613 kJ/mol
(b) ΔH°rxn = [ΔHf°(Si) + 2ΔHf°(F₂)] - ΔHf°(SiF₄)
ΔH°rxn = [0 + 2(0)] - (-1613) kJ/mol
ΔH°rxn = 1613 kJ/mol
(c) ΔH°rxn = [ΔHf°(H₂SO₄)] - [ΔHf°(SO) + ΔHf°(H₂O)]
ΔH°rxn = (-814) - [248 + (-286)] kJ/mol
ΔH°rxn = -276 kJ/mol
(d) ΔH°rxn = [6ΔHf°(KOH) + ΔHf°(O₂)] - [3ΔHf°(K₂O₂) + 3ΔHf°(H₂O)]
ΔH°rxn = [6(-424) + 0] - [3(-496) + 3(-286)] kJ/mol
ΔH°rxn = -1296 kJ/mol
(e) ΔH°rxn = [2ΔHf°(FeCl3) + ΔHf°(FeCl2) + 4ΔHf°(H₋O)] - [ΔHf°(Fe₃O₄) + 8ΔHf°(HCl)]
ΔH°rxn = [2(-399) + (-341) + 4(-286)] - [(-1118) + 8(-92)] kJ/mol
ΔH°rxn = -203 kJ/mol
Find out more on enthalpy here: https://brainly.com/question/16985375
#SPJ1
what mass of calcium metal is produced when molten caf2 is electrolyzed by a current of 9.55 a for 19 h? 136 g
when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, approximately 136 g of calcium metal is produced.
To determine the mass of calcium produced when molten CaF2 is electrolyzed by a current of 9.55 A for 19 h, we'll use Faraday's Law of Electrolysis.
First, calculate the total charge passed through the electrolyte:
Charge (Q) = Current (I) × Time (t)
Q = 9.55 A × (19 h × 3600 s/h) = 653,940 C
Next, determine the number of moles of electrons (n):
n = Q / (Faraday constant F)
n = 653,940 C / (96,485 C/mol) ≈ 6.77 mol
The balanced equation for the electrolysis of CaF2 is:
2F- → F2 + 2e-
Ca2+ + 2e- → Ca
The mole ratio between calcium and electrons is 1:2. So, the number of moles of calcium produced is:
Moles of Ca = 0.5 × Moles of electrons
Moles of Ca = 0.5 × 6.77 mol ≈ 3.39 mol
Finally, calculate the mass of calcium:
Mass of Ca = Moles of Ca × Molar mass of Ca
Mass of Ca = 3.39 mol × 40.08 g/mol ≈ 136 g
To learn more about : calcium
https://brainly.com/question/29231164
#SPJ11
PLEASE ANSWER 30 POINTS!!!!!
How many grams of Ag would be produced from the complete reaction of 48 grams of Mg?
Mg + 2AgNO3 ----> 2Ag + Mg(NO3)2
Mg: 24 g/mol Ag: 108 g/mol
48g Mg --> g Ag
Answer:
432 grams of Ag
Explanation:
First, we need to determine the limiting reagent between Mg and AgNO3.Using the stoichiometry of the balanced chemical equation, we can see that 1 mole of Mg reacts with 2 moles of AgNO3 to produce 2 moles of Ag.
The number of moles of Mg present in 48 grams can be calculated as:
48 g / 24 g/mol = 2 moles Mg
Now, let's calculate the number of moles of Ag that can be produced from 2 moles of Mg:
2 moles Mg x (2 moles Ag / 1 mole Mg) = 4 moles Ag
Finally, we can calculate the mass of Ag produced by multiplying the number of moles of Ag by its molar mass:
4 moles Ag x 108 g/mol = 432 grams Ag
Therefore, 48 grams of Mg will produce 432 grams of Ag in this reaction.
why a beaker of warm water was used as the heat source to remove methylene chloride by simple distillation in order to recover the crude caffeine.
Higher temperatures may affect the stability of the plant extracts. So usually a lower temperature heat source are used in such processes. So here to remove methylene chloride a beaker of warm water is used.
Caffeine is soluble in water, but it is more soluble in organic solvents like methylene chloride. So such solutions are usually preferred for the extraction of plant components. The brewed tea or coffee is mixed with organic solvents like methylene chloride. After vigorous shaking, the caffeine is extracted onto the organic layer from aqueous layer.
The aqueous layer is separated here and the organic layer can be distilled by using a lower temperature, compared to aqueous layer. So here a water bath can be used to remove methylene chloride and we could get nearly pure caffeine.
If either water is used as solvent, a higher temperature is needed for extraction. Here methylene chloride just need a smaller temperature to evaporate and can be done by using a water bath.
So, a beaker of warm water is used as the heat source to improve stability of the product.
For more information regarding extraction of caffeine, kindly refer
https://brainly.com/question/29426391
#SPJ4
without clearing the plot, examine the same alkyl groups with chlorine as the functional group. what is the normal boiling point of methyl chloride, the compound formed between the methyl group and chlorine?
The normal boiling point of methyl chloride, for a given data, is -23.8°C
The bubbling point (boiling point) of a compound is affected by numerous components, checking the quality of intermolecular powers between particles, the degree and shape of the particles, and the restraint of the particles.
When the alkyl bunches are supplanted with chlorine, the coming around compound has diverse intermolecular powers and restraints compared to the beginning compound. In common, particles with polar covalent bonds tend to have higher bubbling centers than nonpolar particles with comparable atomic weights.
Methyl chloride (CH3Cl) may be a polar molecule with a dipole scaled down due to the separation in electronegativity between carbon and chlorine. The quality of the dipole-dipole powers between particles of methyl chloride is more prominent than the quality of the van der Waals powers between particles of methane, which is the compound molded between two methyl bunches.
As a result, the bubbling point of methyl chloride is higher than the bubbling point of methane. The standard bubbling point of methane is -161.5°C, though the commonplace bubbling point of methyl chloride is -23.8°C.
In this way, the commonplace bubbling point of methyl chloride, the compound molded between the methyl collect and chlorine, is -23.8°C.
To know more about boiling point refer to this:
https://brainly.com/question/40140
#SPJ4
a patient's urine sample has a density of 1.02 g/ml. if 1250 ml of urine was excreted by the patient in one day, what mass of urine was eliminated?
Density is defined as the mass of a substance per unit volume. In this case, the density of urine is given as 1.02 g/ml. This means that for every 1 ml of urine, there is 1.02 g of mass.
To find the mass of urine eliminated by the patient in one day, we need to multiply the volume of urine by its density. The volume of urine is given as 1250 ml.
Mass of urine = Volume of urine x Density of urine
Mass of urine = 1250 ml x 1.02 g/ml
Mass of urine = 1275 g
Therefore, the mass of urine eliminated by the patient in one day is 1275 g.
Learn more about volume here
https://brainly.com/question/1578538
#SPJ11
an electron in an atom makes a transition from a state with energy 3.89 ev to a state with energy 1.44 ev and emits a photon. find the wavelength of that photon.
When an electron transitions from a higher energy state to a lower energy state within an atom, it releases energy in the form of a photon.
The energy of this photon is given by the difference between the energy levels of the initial and final states of the electron. In this case, the electron transitions from a state with energy 3.89 eV to a state with energy 1.44 eV. The energy released in this transition is: ΔE = E₂ - E₁ = 1.44 eV - 3.89 eV = -2.45 eV
Note that the negative sign indicates that energy is being released.
We can now use the relationship between energy and wavelength for a photon: E = hc/λ
where h is Planck's constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the photon. Rearranging this equation to solve for λ, we get: λ = hc/E
Plugging in the values we know, we get:
λ = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s)/(-2.45 eV x 1.602 x 10^-19 J/eV)
Note that we converted electron volts (eV) to joules (J) using the conversion factor 1.602 x 10^-19 J/eV.
Simplifying this expression, we get: λ = 507 nm, Therefore, the wavelength of the photon emitted by the electron transition is 507 nm.
To know more about atom click here
brainly.com/question/13973654
#SPJ11
A closed system is one which no matter can enter or exit. True or false
False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.
Three types of systems exist in nature:
1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.
For example oceans etc.
2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.
For example Earth etc
3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.
For example thermos-teel bottles etc.
Learn more about Open Systems:
https://brainly.com/question/28891854
#SPJ4
how many grams of argon would it take to fill a light bulb with a volume of 0.475l at standard temperature (0oc), and 1.5atm?
The number of grams of argon needed to fill a light bulb with a volume of 0.475 liters at 0 degrees Celsius and 1.5 atmospheres can be calculated using the ideal gas law.
The ideal gas law states that the product of pressure, volume, and temperature (in Kelvin) is equal to the number of moles of gas times the ideal gas constant (R). To convert Celsius to Kelvin, add 273.15.
Therefore, the number of moles of argon can be calculated as (1.5 atm)(0.475 L)(273.15 K) / (0.082 L atm K mol-1) = 68.9 moles. Since there are 28.0 g of argon in one mole, the total number of grams of argon needed to fill the light bulb is 68.9 moles x 28.0 g/mol = 1940 gb.
Know more about Moles of argon here
https://brainly.com/question/29055873#
#SPJ11
problem 9.34 the cis and trans isomers of 2,3-dimethyloxirane both react with to give butane-2,3-diol. one stereoisomer gives a single achiral product, and one gives two chiral enantiomers. which epoxide gives one product and which gives two?
The reaction of both cis and trans isomers of 2,3-dimethyloxirane with HBr gives butane-2,3-diol. However, one of these stereoisomers gives a single achiral product, while the other gives two chiral enantiomers.
The reaction of 2,3-dimethyloxirane with itself is an example of an intramolecular nucleophilic substitution reaction.
The cis isomer of 2,3-dimethyloxirane has a plane of symmetry and is therefore an achiral molecule. When it reacts with itself, it will only form a single product nucleophilic substitution reaction.
The trans isomer of 2,3-dimethyloxirane is a chiral molecule and does not have a plane of symmetry. When it reacts with itself, it will form two enantiomers of the product, one being the mirror image of the other.
Learn more about 2,3-dimethyloxirane
https://brainly.com/question/15181918
#SPJ4