Answer:
No change
Explanation:
First, we hare to understand what we mean by buoyant force.
Archimedes Principle states that
"the buoyant force on a submerged object is equal to the weight of the fluid that is displaced by the object."
Hot air balloons rise into the air as a result of the density of the air inside the balloon is less dense i.e warmer air than the air outside the balloon i.e cooler air. This is basically how the balloons work. Now applying this to our question
Replacing Helium with less dense Hydrogen will make no difference to the buoyant force because the volume of the balloon did not change. The buoyant force depends on the weight of the displaced air, and not on the force causing the displacement.
"Neon signs need 12,000 V to operate. If a transformer operates off a 240 V source and has 1000 turns in its primary coil, how may turns must the secondary coil have
Answer:
50000 turns
Explanation:
Vp / Vs = Np / Ns
240 / 12000 = 1000 / Ns
Ns = 50000 turns
A centrifugal pump is operating at a flow rate of 1 m3/s and a head of 20 m. If the specific weight of water is 9800 N/m3 and the pump efficiency is 85%, the power required by the pump is most nearly:
Answer:
The power required by the pump is nearly 230.588 kW
Explanation:
Flow rate of the pump Q = 1 m^3/s
the head flow H = 20 m
specific weight of water γ = 9800 N/m^3
efficiency of the pump η = 85%
First note that specific gravity of water is the product of the density of water and acceleration due to gravity.
γ = ρg
where ρ is density. For water its value is 1000 kg/m^3
g is the acceleration due to gravity = 9.81 m/s^2
The power to lift this water at this rate will be gotten from the equation
P = ρgQH
but ρg = γ
therefore,
P = γQH
imputing values, we'll have
P = 9800 x 1 x 20 = 196000 W
But the centrifugal pump that will be used will only be able to lift this amount of water after the efficiency factor has been considered. The power of pump needed must be greater than this power.
we can say that
196000 W is 85% of the power of the pump power needed, therefore
196000 = 85% of [tex]P_{p}[/tex]
where [tex]P_{p}[/tex] is the power of the pump needed
85% = 0.85
196000 = 0.85[tex]P_{p}[/tex]
[tex]P_{p}[/tex] = 196000/0.85 = 230588.24 W
Pump power = 230.588 kW
An insulated beaker with negligible mass contains liquid water with a mass of 0.285 kg and a temperature of 75.2 ∘C How much ice at a temperature of -22.8 ∘C must be dropped into the water so that the final temperature of the system will be 32.0 ∘C ? Take the specific heat of liquid water to be 4190 J/kg⋅K , the specific heat of ice to be 2100 J/kg⋅K , and the heat of fusion for water to be 3.34×105 J/kg
Answer:
Explanation:
We shall apply the theory of
heat lost = heat gained .
heat lost by water = mass x specific heat x temperature diff
= .285 x 4190 x ( 75.2 - 32 ) = 51587.28 J
heat gained by ice to attain temperature of zero
= m x 2100 x 22.8 = 47880 m
heat gained by ice in melting = latent heat x mass
= 334000m
heat gained by water at zero to become warm at 32 degree
= m x 4190 x 32 = 134080 m
Total heat gained = 515960 m
So
515960 m = 51587.28
m = .1 kg
= 100 gm
You push a shopping cart full of groceries. The shopping cart has a mass of 32
kg.
a. What is the weight of your shopping cart?
b. How much force must you apply to give the cart an acceleration of 1.3 m/s2?
c. If you push with a force of 200 N, what is the acceleration of the cart?
d. You are driving home from the store. If your car has an acceleration of 4.1 m/s2 and its engine is applying a forward force of 7000 N, what is the mass of your car?
Answer:
a) 320N (if you take gravity as 10ms^-2) or 313.6N (if you take gravity as 9.8ms^-2
b) 41.6N
c) 6.25ms^-2
d) 1707.317 kg
Explanation:
a) W=mg
W= 32 x 10 or 9.8
W = 320N or 313.6N
b) F=ma
F= 32 x 1.3
F= 41.6N
c) F=ma
200 = 32 x a
a= 6.25ms^-2
d) F=ma
7000= m x 4.1
m= 1707.317 kg
I am not completely sure about the d) part because I dont whether you will be taking Friction and Normal Reaction too. As per my knowledge, I think no, as no angles nor the gradient of the floor/road is mentioned here.
a) The weight of your shopping cart is 313.6N .
b) The required force is 41.6N
c) The acceleration of the car is 6.25ms^-2
d) The mass of the car is 1707.317 kg.
What is acceleration?Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
a) The weight of the shopping cart: W=mg
W= 32 x 9.8 N
W = 313.6N
b) The required force is to be applied: F=ma
F= 32 x 1.3 N.
F= 41.6N.
c) Let the acceleration of the cart is a.
Then, force: F=ma
200 = 32 x a
a= 6.25ms^-2
Hence, the acceleration of the cart is 6.25ms^-2.
d) Let the mass of the car is m.
Force applied on the car: F=ma
7000= m x 4.1
m= 1707.317 kg
The mass of the car is 1707.317 kg.
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ2
Determine the smallest distance x to a position where 450-nm light reflected from the top surface of the glass interferes constructively with light reflected from the silver coating on the bottom. The light changes phase when reflected at the silver coating.
A wedge of glass of refractive index 1.64 has a silver coating on the bottom, as shown in the image attached below.
Determine the smallest distance x to a position where 450-nm light reflected from the top surface of the glass interferes constructively with light reflected from the silver coating on the bottom. The light changes phase when reflected at the silver coating.
Answer:
the smallest distance x = 2.74 × 10⁻³ m or 2.74 mm
Explanation:
From the given information:
The net phase change is zero because both the light ray reflecting from the air-glass surface and silver plate undergo a phase change of [tex]\dfrac{\lambda}{2}[/tex] , as such the condition for the constructive interference is:
nΔy = mλ
where;
n = refractive index
Δy = path length (inside the glass)
So, from the diagram;
[tex]\dfrac{y}{x}=\dfrac{10^{-5} \ m}{0.2 \ m}[/tex]
[tex]\dfrac{y}{x} = 5 \times 10^{-5}[/tex]
[tex]y = 5 \times 10^{-5} x[/tex]
Now;
Δy can now be = 2 ( 5 × 10⁻⁵ [tex]x[/tex])
Δy =1 × 10⁻⁴[tex]x[/tex]
From nΔy = mλ
n( 1 × 10⁻⁴[tex]x[/tex] ) = mλ
[tex]x = \dfrac{m \lambda}{n \times 1 \times 10^{-4} }[/tex]
when the thickness is minimum then m = 1
Thus;
[tex]x = \dfrac{1 \times 450 \times 10^{-9} \ m}{1.64 \times 1 \times 10^{-4} }[/tex]
x = 0.00274 m
x = 2.74 × 10⁻³ m or 2.74 mm
Answer: B. The surface of the coating is rough, so light that shines on it gets scattered in many directions.
Explanation: On Edge!!!!!!!!!!!!!!!!!!!!
What is the change in internal energy of the system (∆U) in a process in which 10 kJ of heat energy is absorbed by the system and 70 kJ of work is done by the system?
Answer:
Explanation:
According to first law of thermodynamics:
∆U= q + w
= 10kj+(-70kJ)
-60kJ
, w = + 70 kJ
(work done on the system is positive)
q = -10kJ ( heat is given out, so negative)
∆U = -10 + (+70) = +60 kJ
Thus, the internal energy of the system decreases by 60 kJ.
Often in science it is helpful to talk about a representative example of the objects or phenomena being studied. However, you must always keep in mind that the average case is not always representative. For example, our Sun is often described as an "average" star in the Milky Way. In what sense is this statement true? In what sense is this statement seriously misleading? Do you think it is useful to characterize the stars in the Milky Way by simply citing our "average" Sun?
Explanation:
The statement "our sun is an 'average' sun" is true when it is used to describe or characterize some unique physical properties of stars generally in the universe. 'Average' in this sense is used to define a typical sun such as, "stars should glow like our sun an average star."
The statement is used wrongly when used to in quantifying other stars in the universe, based on calculated values from our sun. In this case, we cannot truly say if our sun is a true representative average of other stars in the universe.
Yes! it is useful to characterize the milky way by simply citing the average sun. Properties like their ability to glow and radiate heat can be defined by citing an average star like our sun, so long as we don't translate it into citing quantitative properties of the sun as an average of our Milky Way Galaxy like the mass, temperature, etc.
wrench is to Hammer as
Answer:
Pencil is to pen
Step by step explanation:
They are similar items, as they are both tools, but are different as to how they function.
Two metal sphere each of radius 2.0 cm, have a center-to-center separation of 3.30 m. Sphere 1 has a chrage of +1.10 10^-8 C. Sphere 2 has charge of -3.60 10^-8C. Assume that the separation is large enough for us to assume that the charge on each sphere iss uniformly distribuuted.
A) Calculate the potential at the point halfway between the centers.
B) Calculate the potential on the surface of sphere 1.
C) Calculate the potential on the surface of sphere 2.
Answer:
A) V = -136.36 V , B) V = 4.85 10³ V , C) V = 1.62 10⁴ V
Explanation:
To calculate the potential at an external point of the spheres we use Gauss's law that the charge can be considered at the center of the sphere, therefore the potential for an external point is
V = k ∑ [tex]q_{i} / r_{i}[/tex]
where [tex]q_{i}[/tex] and [tex]r_{i}[/tex] are the loads and the point distances.
A) We apply this equation to our case
V = k (q₁ / r₁ + q₂ / r₂)
They ask us for the potential at the midpoint of separation
r = 3.30 / 2 = 1.65 m
this distance is much greater than the radius of the spheres
let's calculate
V = 9 10⁹ (1.1 10⁻⁸ / 1.65 + (-3.6 10⁻⁸) / 1.65)
V = 9 10¹ / 1.65 (1.10 - 3.60)
V = -136.36 V
B) The potential at the surface sphere A
r₂ is the distance of sphere B above the surface of sphere A
r₂ = 3.30 -0.02 = 3.28 m
r₁ = 0.02 m
we calculate
V = 9 10⁹ (1.1 10⁻⁸ / 0.02 - 3.6 10⁻⁸ / 3.28)
V = 9 10¹ (55 - 1,098)
V = 4.85 10³ V
C) The potential on the surface of sphere B
r₂ = 0.02 m
r₁ = 3.3 -0.02 = 3.28 m
V = 9 10⁹ (1.10 10⁻⁸ / 3.28 - 3.6 10⁻⁸ / 0.02)
V = 9 10¹ (0.335 - 180)
V = 1.62 10⁴ V
7. How many 1.00 µF capacitors must be connected in parallel to store a charge of 1.00 C with a potential of 110 V across the capacitors?
Answer:
q = C V charge on 1 capacitor
q = 1 * 10E-6 * 110 = 1.1 * 10E-4 C per capacitor
N = Q / q = 1 / 1.1 * 10E-4 = 9091 capacitors
9.09 × 10³ capacitors must be connected in parallel.
How to calculate the number of capacitors connected in parallel?
Given C = 1.00μF = 1 × 10⁻⁶ F
q = 1.00 C
V = 110 V
The equivalent capacitance is given by
Ceq = q/V
where q = total charge on all the capacitors
V = potential difference
For N number of identical capacitors in parallel,
Ceq = NC
Therefore,
NC = q/V
N = q/VC
Putting on the values in the above formula,
N = 1/ (110)(1 × 10⁻⁶)
= 1 / 110 × 10⁻⁶
= 9.09 × 10³
Learn more about the capacitors here:
https://brainly.com/question/15052170
#SPJ2
Experts, ACE, Genius... can anybody calculate for the Reactions at supports A and B please? Will give brainliest! Given: fb = 300 kN/m, fc = 100 kN/m, Dy = 300 kN, spanAB = 6m, span BC = 6m, spanCD = 6m
Answer:
Support at Cy = 1.3 x 10³ k-N
Support at Ay = 200 k-N
Explanation:
given:
fb = 300 k-N/m
fc = 100 k-N/m
D = 300 k-N
L ab = 6 m
L bc = 6 m
L cd = 6 m
To get the reaction A or C.
take summation of moment either A or C.
Support Cy:
∑ M at Ay = 0
(( x1 * F ) + ( D * Lab ) + ( D * L bc + D * L cd )
Cy = -------------------------------------------------------------------
( L ab + L bc )
Cy = 1.3 x 10³ k-N
Support Ay:
Since ∑ F = 0, A + C - F - D = 0
A = F + D - C
Ay = 200 k-N
Answer:
i was going to but its to late
Explanation:
A single slit 1.4 mmmm wide is illuminated by 460-nmnm light. Part A What is the width of the central maximum (in cmcm ) in the diffraction pattern on a screen 5.0 mm away
Answer:
1.643*10⁻⁴cmExplanation:
In a single slit experiment, the distance on a screen from the centre point is expressed as y = [tex]\frac{\delta m \lambda d}{a}[/tex] where;
[tex]\delta m[/tex] is the first two diffraction minima = 1
[tex]\lambda[/tex] is light wavelength
d is the distance of diffraction pattern from the screen
a is the width of the slit
Given [tex]\lambda[/tex] = 460-nm = 460*10⁻⁹m
d = 5.0mm = 5*10⁻³m
a = 1.4mm = 1.4*10⁻³m
Substituting this values into the formula above to get width of the central maximum y;
y = 1*460*10⁻⁹ * 5*10⁻³/1.4*10⁻³
y = 2300*10⁻¹²/1.4*10⁻³
y = 1642.86*10⁻⁹
y = 1.643*10⁻⁶m
Converting the final value to cm,
since 100cm = 1m
x = 1.643*10⁻⁶m
x = 1.643*10⁻⁶ * 100
x = 1.643*10⁻⁴cm
Hence, the width of the central maximum in the diffraction pattern on a screen 5.0 mm away is 1.643*10⁻⁴cm
For every particle there is a corresponding ______________.
Answer:
Anti-Particle
a wire of a certain material has resistance r and diameter d a second wire of the same material and length is found to have resistance r/9 what is the diameter of the second wire g
Answer:
d₂ = 3dThe diameter of the second wire is 3 times that of the initial wire.Explanation:
Using the formula for calculating the resistivity of an object to find the diameter.
Resistivity P = RA/L
R is the resistance of the material
A is the cross sectional area
L is the length of the material
Since A = πd²/4
P = R( πd²/4)/L
P = Rπd²/4L ... 1
If the second wire of the same material and length is found to have resistance R/9, the resistivity of the second material will be;
P₂ = (R/9)A₂/L₂
P₂ = (R/9)(πd₂²/4)/L₂
P₂ = (Rπd₂²/36)/L₂
P₂ = (Rπd₂²)/36L₂
Since the length and resistivity are the same;
P = P₂ and L =L₂
Equating 1 and 2;
Rπd²/4L = (Rπd₂²)/36L₂
Rπd²/4L = (Rπd₂²)/36L
d² = d₂²/9
d₂² = 9d²
Taking the square root of both sides;
√d₂² = √9d²
d₂ = 3d
Therefore the diameter of the second wire is 3 times that of the initial wire
Which of the following represents a concave mirror? +f,-f,-di,+di
Answer:
fully describes the concave mirror is + f
Explanation:
A concave mirror is a mirror where light rays are reflected reaching a point where the image is formed, therefore this mirror has a positive focal length, the amount that fully describes the concave mirror is + f
This allows defining a sign convention, for concave mirror + f, the distance to the object is + d0 and the distance to the image is + di
Answer:
+f
Explanation:
because you have to be really dumb to get an -f
Assume that a lightning bolt can be represented by a long straight line of current. If 15.0 C of charge passes by in a time of 1.5·10-3s, what is the magnitude of the magnetic field at a distance of 24.0 m from the bolt?
Answer:
The magnitude of the magnetic field is 8.333 x 10⁻⁷ T
Explanation:
Given;
charge on the lightening bolt, C = 15.0 C
time the charge passes by, t = 1.5 x 10⁻³ s
Current, I is calculated as;
I = q / t
I = 15 / 1.5 x 10⁻³
I = 10,000 A
Magnetic field at a distance from the bolt is calculated as;
[tex]B = \frac{\mu_o I}{2\pi r}[/tex]
where;
μ₀ is permeability of free space = 4π x 10⁻⁷
I is the current in the bolt
r is the distance of the magnetic field from the bolt
[tex]B = \frac{\mu_o I}{2\pi r} \\\\B = \frac{4\pi *10^{-7} 10000}{2\pi *24} \\\\B = 8.333 *10^{-5} \ T[/tex]
Therefore, the magnitude of the magnetic field is 8.333 x 10⁻⁷ T
The Goliath six flags Magic Mountain roller coaster ride starts at 71.6 m (235 feet) above the ground. Assuming the coaster starts from rest and ignoring any friction, what is the speed of the coaster when it reaches the ground level
Answer:
The velocity is [tex]v = 37 .46 \ m/s[/tex]
Explanation:
From the question we are told that
The start distance above the ground is [tex]h = 71.6 \ m[/tex]
Generally according to the law of energy conservation we have that
[tex]PE_{top} = KE_{bottom }[/tex]
Where [tex]PE_{top}[/tex] is potential energy at the top which is mathematically represented as
[tex]PE_{top} = m * g * h[/tex]
And [tex]KE_{bottom }[/tex] is the kinetic energy at the bottom which is mathematically represented as
[tex]KE_{bottom } = \frac{1}{2} * m * v^2[/tex]
Therefore
[tex]m * g * h = \frac{1}{2} * m * v^ 2[/tex]
=> [tex]v = \sqrt{2 * g * h }[/tex]
substituting value
[tex]v = \sqrt{2 * 9.8 * 71.6 }[/tex]
[tex]v = 37 .46 \ m/s[/tex]
In a system with only a single force acting upon a body, what is the relationship between the change in kinetic energy and the work done by the force?
Answer: W.D = 1/2mv^2
Explanation:
If an external force or a single force is acting on a body. Just like the first law of thermodynamics, the force acting on the body will cause work done on the system.
Work done = force × distance
And the work done on the body will cause the molecules of the body to experience motion and thereby producing kinetic energy.
The work done will be converted to kinetic energy.
W.D = 1/2mv^2
A 150 g ball rolls at 10 cm/s rightward over a frictionless surface towards a spring 75 cm away, with spring constant 200 N/m. How far does is the spring compressed when the ball is brought to rest
Answer:
x = 0.27 cm
Explanation:
given data
mass = 150 g
velocity = 10 cm/s = 0.1 m/s
spring constnat = 200 N/m
solution
as we know that here ball is moving with constant speed
so
0.5 × m × v² = 0.5 × k × x² .......................1
here x is compression in spring
so put here value and we get
0.5 × 150 × (0.1)² = 0.5 × 200 × x²
solve it we get
x = 0.27 cm
g An object with mass 1kg travels at 3 m/s and collides with a stationary object whose mass is 0.5kg. The two objects stick together and continue to move. What is the velocity of the two objects together after collision
Answer:
2
Explanation:
since the second object was in it stationary, it velocity is 0 m/s
Will give brainliest ASAP! Please help (1/10 questions, will mark 5 stars and brainliest for all answers if correct)
Answer:
Option (A)
Explanation:
A 20 kg boy chases the butterfly with a speed of 2 meter per second.
Angle at which he runs is 70° North of West.
Therefore, Horizontal component (Vx) directing towards West will be,
Vx = v(Cos70°)
Vy = v(Sin70°)
Since momentum of a body is defined by,
Momentum = Mass × Velocity
Therefore, Westerly component of the momentum will be,
Momentum = 20 × (v)(Cos70°)
= 20 × 2Cos70°
= 13.68
≈ 13.7 kg-meter per second
Therefore, Option (A) will be the answer.
a uniform ladder of mass 100kg leans at 60° to the horizontal against a frictionless wall, calculate the reaction on the wall.
Answer:
[tex]500\text{N} (490\text{N}) (490.5\text{N})[/tex]
Explanation:
The reaction force is the force that is in the perpendicular direction to the wall.
We have an angle and a hypotenuse, we need to find the adjacent angle - so we can just use cos:
[tex]cos(\theta)=\frac{\text{adj}}{\text{hyp}}\\\text{hyp}*cos(\theta)=\text{adj}\\100*cos(60)=100*0.5=50\text{kg}[/tex]
However, we would like a force and not a mass.
[tex]W=mg\\W=50g\\W=500\text{N} (490\text{N}) (490.5\text{N})[/tex]
Answer 1 if you use g as 10, answer 2 if you're studying mechanics in maths, answer 3 if you're studying mechanics in physics.
An electron traveling with a speed v enters a uniform magnetic field directed perpendicular to its path. The electron travels for a time t0 along a half-circle of radius R before leaving the magnetic field traveling opposite the direction it initially entered the field. Which of the following quantities would change if the electron had entered the field with a speed 2v? (There may be more than one correct answer.)
A. The time the electron is in the magnetic field
B. The magnitude of the net force acting on the electron inside the field
C. The magnitude of the electron's acceleration inside the field
D. The radius of the circular path the electron travels
Answer:
C. The magnitude of the electron's acceleration inside the field
D. The radius of the circular path the electron travels
Explanation:
The radius of the electron's motion in a uniform magnetic field is given by
[tex]R = \frac{MV}{qB}[/tex]
where;
m is the mass of the electron
q is the charge of the electron
B is the magnitude of the magnetic field
V is speed of the electron
R is the radius of the electron's
Thus, the radius of the of the electron's motion will change since it depends on speed of the electron.
The magnitude of the electron's acceleration inside the field is given by;
[tex]a_c = \frac{V^2}{R}[/tex]
where;
[tex]a_c[/tex] is centripetal acceleration of electron
Thus, the magnitude of the electron's acceleration inside the field will change since it depends on the electron speed.
The time the electron is in the magnetic field is given by;
[tex]T = \frac{2\pi M}{qB}[/tex]
The time of electron motion will not change
The magnitude of the net force acting on the electron inside the field will not change;
[tex]qVB = \frac{MV^2}{R} \\\\qVB - \frac{MV^2}{R} = 0[/tex]
Therefore, the correct options are "C" and "D"
A 1-kilogram mass is attached to a spring whose constant is 18 N/m, and the entire system is then submerged in a liquid that imparts a damping force numerically equal to 11 times the instantaneous velocity. Determine the equations of motion if the following is true?
a. the mass is initially released from rest from a point 1 meter below the equilibrium position
b. the mass is initially released from a point 1 meter below the equilibrium position with an upward velocity of 11 m/s
Answer:
Let [tex]x(t)[/tex] denote the position (in meters, with respect to the equilibrium position of the spring) of this mass at time [tex]t[/tex] (in seconds.) Note that this question did not specify the direction of this motion. Hence, assume that the gravity on this mass can be ignored.
a. [tex]\displaystyle x(t) = -\frac{9}{7}\, e^{-2 t} + \frac{2}{7}\, e^{-9 t}[/tex].
b. [tex]\displaystyle x(t) = \frac{2}{7}\, e^{-2 t} - \frac{9}{7}\, e^{-9 t}[/tex].
Explanation:
Let [tex]x[/tex] denote the position of this mass (in meters, with respect to the equilibrium position of the spring) at time [tex]t[/tex] (in seconds.) Let [tex]x^\prime[/tex] and [tex]x^{\prime\prime}[/tex] denote the first and second derivatives of [tex]x[/tex], respectively (with respect to time [tex]t[/tex].)
[tex]x^\prime[/tex] would thus represent the velocity of this mass.[tex]x^{\prime\prime}[/tex] would represent the acceleration of this mass.Constructing the ODEConstruct an equation using [tex]x[/tex], [tex]x^\prime[/tex], and [tex]x^{\prime\prime}[/tex], with both sides equal the net force on this mass.
The first equation for the net force on this mass can be found with Newton's Second Law of motion. Let [tex]m[/tex] denote the size of this mass. By Newton's Second Law of motion, the net force on this mass would thus be equal to:
[tex]F(\text{net}) = m\, a = m\, x^{\prime\prime}[/tex].
The question described another equation for the net force on this mass. This equation is the sum of two parts:
The restoring force of the spring: [tex]F(\text{spring}) = -k\, x[/tex], where [tex]k[/tex] denotes the constant of this spring.The damping force: [tex]F(\text{damping}) = - 11\,x^\prime[/tex] according to the question. Note the negative sign in this expression- the damping force should always oppose the direction of motion.Assume that there's no other force on this mass. Combine the restoring force and the damping force obtain an expression for the net force on this mass:
[tex]F(\text{net}) = -k\, x - 11\, x^\prime[/tex].
Combine the two equations for the net force on this mass to obtain:
[tex]m\, x^{\prime\prime} = -k\, x - 11\, x^\prime[/tex].
From the question:
Size of this mass: [tex]m = 1\; \rm kg[/tex].Spring constant: [tex]k = 18\; \rm N \cdot m^{-1}[/tex].Hence, the equation will become:
[tex]x^{\prime\prime} = -18\, x - 11\, x^\prime[/tex].
Rearrange to obtain:
[tex]x^{\prime\prime} + 11\, x^\prime + 18\; x = 0[/tex].
Finding the general solution to this ODE[tex]x^{\prime\prime} + 11\, x^\prime + 18\; x = 0[/tex] fits the pattern of a second-order homogeneous ODE with constant coefficients. Its auxiliary equation is:
[tex]m^2 + 11\, m + 18 = 0[/tex].
The two roots are:
[tex]m_1 = -2[/tex], and[tex]m_2 = -9[/tex].Let [tex]c_1[/tex] and [tex]c_2[/tex] denote two arbitrary real constants. The general solution of a second-order homogeneous ODE with two distinct real roots [tex]m_1[/tex] and [tex]m_2[/tex] is:
[tex]x = c_1\, e^{m_1\cdot t} + c_2\, e^{m_2\cdot t}[/tex].
For this particular ODE, that general solution would be:
[tex]x = c_1\, e^{-2 t} + c_2\, e^{-9 t}[/tex].
Finding the particular solutions to this ODENote, that if [tex]x(t) = c_1\, e^{-2 t} + c_2\, e^{-9 t}[/tex] denotes the position of this mass at time [tex]t[/tex], then [tex]x^\prime(t) = -2\,c_1\, e^{-2 t} -9\, c_2\, e^{-9 t}[/tex] would denote the velocity of this mass at time
The position at time [tex]t = 0[/tex] would be [tex]x(0) = c_1 + c_2[/tex].The velocity at time [tex]t = 0[/tex] would be [tex]x^\prime(0) = -2\, c_1 - 9\, c_2[/tex].For section [tex]\rm a.[/tex]:
[tex]\left\lbrace\begin{aligned}& x(0) = -1 \\ &x^\prime(0) = 0\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 + c_2 = -1 \\ &-2\, c_1 - 9\, c_2 = 0\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 = -\frac{9}{7} \\ &c_2 = \frac{2}{7}\end{aligned}\right.[/tex].
Hence, the particular solution for section [tex]\rm a.[/tex] will be:
[tex]\displaystyle x(t) = -\frac{9}{7}\, e^{-2 t} + \frac{2}{7}\, e^{-9 t}[/tex].
Similarly, for section [tex]\rm b.[/tex]:
[tex]\left\lbrace\begin{aligned}& x(0) = -1 \\ &x^\prime(0) = 11\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 + c_2 = -1 \\ &-2\, c_1 - 9\, c_2 = 11\end{aligned}\right. \implies \left\lbrace\begin{aligned} &c_1 = \frac{2}{7} \\ &c_2 = -\frac{9}{7}\end{aligned}\right.[/tex].
Hence, the particular solution for section [tex]\rm b.[/tex] will be:
[tex]\displaystyle x(t) = \frac{2}{7}\, e^{-2 t} - \frac{9}{7}\, e^{-9 t}[/tex].
In a high school swim competition, a student takes 1.6 s to complete 2.0 somersaults. Determine the average angular speed of the diver, in rad/s, during this time interval.
Answer:
9.82 rads/sec
Explanation:
We are given;
Time taken; t = 1.6 secs
Number of somersaults = 2
Now, we know that,
1 revolution = 2π radians
And number of somersaults is the same thing as number of revolutions
So,
Total radians = 2π × 2 = 5π
Angular velocity = total number of revolutions/time period = 5π/1.6 = 9.82 rads/sec
A current carrying loop of wire lies flat on a table top. When viewed from above, the current moves around the loop in a counterclockwise sense.
(a) For points OUTSIDE the loop, the magnetic field caused by this current:________.
a. points straight up.
b. circles the loop in a clockwise direction.
c. circles the loop in a counterclockwise direction.
d. points straight down.
e. is zero.
(b) For points INSIDE the loop, the magnetic field caused by this current:________.
a. circles the loop in a counterclockwise direction.
b. points straight up.
c. points straight down.
d. circles the loop in a clockwise direction.
e. is zero
Answer:
D &B
Explanation:
Using Fleming right hand rule that States that if the fore-finger, middle finger and the thumb of left hand are stretched mutually perpendicular to each other, such that fore-finger points in the direction of magnetic field, the middle finger points in the direction of the motion of positive charge, then the thumb points to the direction of the force
A Young's interference experiment is performed with blue-green laser light. The separation between the slits is 0.500 mm, and the screen is located 3.10 m from the slits. The first bright fringe is located 3.22 mm from the center of the interference pattern. What is the wavelength of the laser light?
Answer:
λ = 5.2 x 10⁻⁷ m = 520 nm
Explanation:
From Young's Double Slit Experiment, we know the following formula for the distance between consecutive bright fringes:
Δx = λL/d
where,
Δx = fringe spacing = distance of 1st bright fringe from center = 0.00322 m
L = Distance between slits and screen = 3.1 m
d = Separation between slits = 0.0005 m
λ = wavelength of light = ?
Therefore,
0.00322 m = λ(3.1 m)/(0.0005 m)
λ = (0.00322 m)(0.0005 m)/(3.1 m)
λ = 5.2 x 10⁻⁷ m = 520 nm
what is electric field strength
Answer:
Electric field strengh is a measure of the strength of an electric field at a given point in space, equal to the field would induce on a unit electric charge at that point.
Electric field strength is also known as Electric Field Intensity .
Explanation:
Electric Field is also defined as force per charge. The unit will be force unit divided by charge unit. In this case, it will be Newton/Coulomb or N/C.
Please mark me as the brainliest!!!
Thanks!!!
A drum rotates around its central axis at an angular velocity of 19.4 rad/s. If the drum then slows at a constant rate of 8.57 rad/s2, (a) how much time does it take and (b) through what angle does it rotate in coming to rest
Answer:
Explanation:
Using equations of motion:
(a)
v=u+at
∴0=19.4−8.57t
∴t=19.4/8.57
=2.3s
B. Using s= ut + 1/2 at²
19.4(2.3)-1/28.57(2.3)²
= 21.92rad
with a speed of 75 m sl. Determine
1) A vehicle of mass 1600 kg moves
the magnitude of its momentum.
Answer:
120000 kgxm/s
Explanation:
momentum is mass times velocity so just multiply 1600 kg times 75 m/s and you get 120000 kgxm/s