Classify each of the following as an example of a mandatory, discretionary, or originator controlled policy, or a combination thereof. Justify your answers.
a. The file access control mechanisms of the UNIX operating system
b. A system in which no memorandum can be distributed without the author's consent
c. A military facility in which only generals can enter a particular room
d. A university registrar's office, in which a faculty member can see the grades of a particular student provided that the student has given written permission for the faculty member to see them.
Answer:
Classifications according to mandatory, discretionary, or originator controlled policy, or a combination thereof:
a. Mandatory
b. Originator
c. Discretionary
d. Mandatory and Originator combined
Explanation:
a) Mandatory control means that access to the UNIX operating system is restricted.
b) Originator controlled policy implies that the memorandum cannot be distributed without the author's consent or permission.
c) Discretionary means that only certain authorized users, for example, generals, can access the particular room.
d) Combined Mandatory and Originator means that while access is restricted to some people, the originator's consent is still required before access can be granted to the faculty member.
What is the correct order for the three steps of how a hormone would work
A. Response > Reception > Transduction.
B. Reception > Response > Transduction.
C. Reception > Transduction > Response.
D. Transduction Response > Signaling.
Answer:
answers is -d
Explanation:
,kggc’hnftfj’trudging.ugu,y
Is anyone good at 10th grade chemistry if so can someone help me please ?
If I have 5 moles of a gas at a pressure of 6.5 atm and a volume of 14 liters, what is the temperature?
PV=nRT
Answer: 190.9K
Explanation:
5.6(14) = 5(.0821)T or (5.6*14)/(5(.0821))
78.4 = 0.4105T
190.9K = T
in the photosynthesis the energy starts as ___ energy and ends up as___energy
light heat
chemical: chemical
heat light
light chemical
Answer: Light, Chemical
Explanation: This is the answer because "photosynthesis takes place in two stages: the light-dependent reactions and the Calvin cycle. In the light-dependent reactions, which take place at the thylakoid membrane, chlorophyll absorbs energy from sunlight and then converts it into chemical energy with the use of water." - source https://opentextbc.ca/
In the photosynthesis the energy starts as Light energy and ends up as Chemical Energy. Hence option (D) is correct
What is Photosynthesis ?The process by that inexperienced plants and a few different organisms use daylight to synthesize nutrients from carbonic acid gas and water. chemical action in plants usually involves the inexperienced pigment and generates element as a by-product.
Photosynthesis may be a method employed by plants and different organisms to convert lightweight energy into energy that, through internal respiration, will later be discharged to fuel the organism's activities.
photosynthesis takes place in 2 stages: the light-dependent reactions and also the Calvin cycle. within the light-dependent reactions, that manifest itself at the thylakoid membrane, pigment absorbs energy from daylight and so converts it into energy with the employment of water.
Therefore, In the photosynthesis the energy starts as Light energy and ends up as Chemical Energy. Hence option (D) is correct
Learn more about Photosynthesis here ;
https://brainly.com/question/1388366
#SPJ2
Suppose you want to prepare a buffer with a pH of 4.59 using formic acid. What ratio of [sodium formate]/[formic acid) do you need to make this buffer? Formic acid has a K, of 1.8x10 4 Enter your answer to three significant figures.
Answer:
7.08
Explanation:
To solve this problem we'll use the Henderson-Hasselbach equation:
pH = pka + log[tex]\frac{[A^-]}{[HA]}[/tex]Where [tex]\frac{[A^-]}{[HA]}[/tex] is the ratio of [sodium formate]/[formic acid] and pka is equal to -log(Ka), meaning that:
pka = -log (1.8x10⁻⁴) = 3.74We input the data:
4.59 = 3.74 + log[tex]\frac{[A^-]}{[HA]}[/tex]And solve for [tex]\frac{[A^-]}{[HA]}[/tex]:
0.85 = log[tex]\frac{[A^-]}{[HA]}[/tex][tex]10^{(0.85)}[/tex]=[tex]\frac{[A^-]}{[HA]}[/tex][tex]\frac{[A^-]}{[HA]}[/tex] = 7.08The ratio of [sodium formate] to [formic acid] needed to make the buffer is 7.08
How to determine the pKaEquilibrium constant (Ka) = 1.8×10¯⁴pKa =?pKa = –Log Ka
pKa = –Log 1.8×10¯⁴
pKa = 3.74
How to determine the ratio of [sodium formate] to [formic acid]pH = 4.59pKa = 3.74Ratio of [sodium formate] to [formic acid] =?pH = pKa + Log[sodium formate]/[formic acid]
4.59 = 3.74 + Log[sodium formate]/[formic acid]
Collect like terms
4.59 – 3.74 = Log[sodium formate]/[formic acid]
0.85 = Log[sodium formate]/[formic acid]
Take the anti-log of 0.85
[sodium formate]/[formic acid] = anti-log 0.85
[sodium formate]/[formic acid] = 7.08
Learn more about pH of buffer:
https://brainly.com/question/3709867
What is the molar mass of Ammonium Carbonate?
Answer:
96.09 g/mol
Explanation:
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEWSE HELP PLEASE HELP ANYBODY!!! CHEMISTRY DUE IN 5 MINUTES!! DIMENSIONAL ANALYSIS
How many moles of O2 are in the sample of 3.6 kilograms of air if 21% of the air is oxygen, O2, by mass?
WILL GIVE BRAINLIEST PLEASE ANYONE WHO KNOWS HOW TO DO MOLE CONVERSIONS AND DIMENSIONAL ANALYSIS
Answer:
23.6 moles
Explanation:
From the question given above, the following data were obtained:
Mass of air = 3.6 Kg
Mass percentage of O₂ = 21%
Number of mole of O₂ =?
Next, we shall convert 3.6 Kg of air to grams (g). This can be obtained as follow:
1 kg = 1000 g
Therefore,
3.6 Kg = 3.6 Kg × 1000 / 1 kg
3.6 Kg = 3600 g
Next, we shall determine the mass of O₂ in the air. This can be obtained as follow:
Mass of air = 3600 g
Mass percentage of O₂ = 21%
Mass of O₂ =?
Mass of O₂ = 21% × 3600
Mass of O₂ = 21/100 × 3600
Mass of O₂ = 756 g
Finally, we shall determine the number of mole of O₂ in the sample of air. This can be obtained as follow:
Mass of O₂ = 756 g
Molar mass of O₂ = 2 × 16 = 32 g/mol
Number of mole of O₂ =?
Mole = mass /Molar mass
Number of mole of O₂ = 756 / 32
Number of mole of O₂ = 23.6 moles
Thus, the number of mole of O₂ in the
sample of air is 23.6 moles
Number of moles In 52.3 g of C12H22O11
Answer:
0.1529mol
Explanation:
Number of mole = x mol
Mass = 52.3g
Molar Mass of Sucrose
(C = 12, H = 1, O = 16)
C12H22O11
(12×12)+(1×22)+(16×11)
144 + 22 + 176
342g/mol
Number of Mole = Mass given/Molar mass
Number of mole = 52.3/342
Number of mole = 0.1529mol
Convert 10.0 g of iron (II) sulfate to moles.
please explain how to do this! I don't understand
Explanation:
number of moles =mass /relative molecular mass
n=10g/mr(FeSO4)
N=10/(56+32+16×4)
N=10/152
N=0,066 moles
Complex ___ of ETC, which mediates transfer of electrons from succinate (FADH2) to UQ, is not a proton pump.
Answer:
Complex II
Explanation:
Complex II does not directly pump protons but rather sends two protons on to Complex III in the form of the reduced UQ known as ubiquinol.
Thus, the correct answer is Complex II
how many elements are in 2o2
Answer: hope this helps
Explanation: I’m not sure but after some research here’s what I gathered The molecule has 3 calcium atoms, 2 phosphate atoms and 8 O atoms in it also rate this and pls thank me follow and as as many questions as you need.
Which type of solution below has a cloudy appearance? (Choose all that apply)
a. Colloids
b. Suspensions
c. Solutions
d. Alloys
The type of solutions which are appearing cloudy are called colloids. Therefore, option a is correct.
What are colloids ?Colloids are mixtures in which particles of one substance are evenly dispersed throughout another substance, creating a stable mixture. The particles in a colloid are larger than those found in a solution, but smaller than those found in a suspension.
Colloids can be found in various states of matter, including solid, liquid, and gas, and they can be formed from a wide range of substances, such as polymers, metals, and biological molecules.
One important characteristic of colloids is their ability to scatter light. This phenomenon, known as the Tyndall effect, occurs when light passes through a colloid and is reflected by the particles, causing the mixture to appear cloudy or hazy.
Colloids also exhibit unique properties related to their size and shape, such as viscosity, surface tension, and Brownian motion. They appear cloudy in nature.
Find more on colloids:
https://brainly.com/question/25118068
#SPJ3
Mixture of water and non-dissolved materials.
A mixture of water and non-dissolved materials is called a heterogeneous mixture.
A heterogeneous mixture is a mixture that contains two or more substances that are not uniformly distributed throughout the mixture.
In a mixture of water and non-dissolved materials, the non-dissolved materials are not uniformly distributed throughout the water. Instead, they will settle to the bottom of the container over time.
Therefore, heterogeneous mixture is a mixture of water and non-dissolved materials.
Learn more about mixture here:
https://brainly.com/question/12160179
#SPJ6
I’m stuck on this can I get a little help please
Answer:
table A
Explanation:
its table A because it requires less force push. the less force used the less friction there is.
the less friction there is the more smooth a surface is.
3
A student has a 5.00 gram sample of calcium chloride (CaCl2) solid. How many moles of calcium chloride are
contained in this sample?
Answer: 0.0450 moles of [tex]CaCl_2[/tex]
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to its molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
[tex]\text{Number of moles of} CaCl_2=\frac{5.00g}{110.98g/mol}=0.0450moles[/tex]
Thus there are 0.0450 moles of [tex]CaCl_2[/tex]
2.)what is the place value of 7 in 970 123 885
3.)in 292.145,what number is in the thousands place?
4.)what is the place value of 9 in 6547.965?
5.)in 476.8976,what is the
value of underline digi?...si number 7 po naka underline.
Answer:
2.place value is 70 000 00
Explain the flow of energy needed to bring electrical energy to the city.
Answer:
The electricity that flows to our homes is generated in the power station from here it flows through large transmission line which carry it to substations finally distribution carry electricity from substations to homes schools etc
In the laboratory, a general chemistry student measured the pH of a 0.328 M aqueous solution of acetylsalicylic acid (aspirin), HC9H7O4 to be 1.987. Use the information she obtained to determine the Ka for this acid.
Answer: [tex]K_a[/tex] for the acid is [tex]3.34\times 10^{-4}[/tex]
Explanation:
[tex]HC_9H_7O_4\rightarrow H^+C_9H_7O_4^-[/tex]
cM 0 0
[tex]c-c\alpha[/tex] [tex]c\alpha[/tex] [tex]c\alpha[/tex]
Give c = 0.328 M and [tex]pH=1.987[/tex]
[tex]1.987=-log[H^+][/tex]
[tex][H^+]=0.0103[/tex]
[tex][H^+]=c\times \alpha[/tex]
[tex]0.0103=0.328\times \alpha[/tex]
[tex]\alpha=0.0314[/tex]
So dissociation constant will be:
[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]
Putting in the values we get:
[tex]K_a=\frac{(0.328\times 0.0314)^2}{(0.328-0.328\times 0.0314)}[/tex]
[tex]K_a=3.34\times 10^{-4}[/tex]
someone help please this is due today!!?
Answer:
I think beaker three will take longer to boil since there is more water present,compared to the other beakers
the ph of a naoh solution is 12.05. what is the concentration of [oh-] of the naoh solution? express your answer in standard notation
Answer:
0.01 M
Explanation:
NaOH (sodium hydroxide) is a strong base, so it is completely dissociated into ions in aqueous solution:
NaOH ⇄ Na⁺ + OH⁻
So, we have OH⁻ ions in solution.
From the problem, we have the pH value. The pH is calculated as:
pH = -log [H⁺]
As NaOH is a base, we can also calculate the pOH:
pOH = -log [OH⁻]
Thus. we can use the relation between pH and pOH to calculate the pOH and then use it to calculate [OH⁻]:
pH + pOH = 14 ⇒ pOH = 14 - pH = 14 - 12.05 = 1.95
pOH = -log [OH⁻] ⇒ [OH⁻] = [tex]10^{-pOH}[/tex]= [tex]10^{1.95}[/tex]= 0.0112 M ≅ 0.01 M
Answer:
0.0112
Explanation:
They said that was the answer.
It is the highest point in a wave.
Answer:
Crest is the highest point of a wave
Can someone please help me with this I’ll mark brainliest, in the boxes below label what level of organization might look like?
Answer:
Vascular tissue transports water, minerals, and sugars to different parts of the plant. Vascular tissue is made of two specialized conducting tissues: xylem and phloem. Xylem tissue transports water and nutrients from the roots to different parts of the plant, and also plays a role in structural support in the stem.
Explanation:
HOPE THIS HELPS!
50 POINTS
Which of the following correctly describes a compound?
A. The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.
B. The atoms have no set ratio for how the atoms can combine, and they are not chemically bonded together.
C. The atoms can only combine in fixed ratios, and they retain their individual chemical and physical properties.
D. The atoms retain their individual chemical properties, and they can only be separated from each other by a chemical change.
Answer: A chemical compound can be described as substance composed of atoms from more than one element held together by chemical bonds in a fixed stoichiometric proportion. A compound has different physical and chemical properties from its constituent elements.
For example : compound water is made up of H and O bonded together and it has different properties from O and H.
Thus, among the given options, the one coreectly describing a compound is
a) The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.
What are a few ways diseases spread?
Answer:Through Direct or indirect contact with an infected person or animal, through air or contaminated food and water.
Explanation:
9. The role of an organism in an ecosystemis called alan
O A. habitat
O B. niche
O C. evolution
D. community
A student adds an alka-seltzer to the Koolaid and stirs. The pH meter now reads 8.3. What was released by the alka-seltzer tablet to cause this change?
Answer:
It released hydroxide ions (OH ¯).
Explanation:
A PH of 8.3 indicates that the solution has become a basic solution.
Now, for us to have a basic solution from the addition of an alka-seltzer to Koolaid, it means the Alka-seltzer released plenty of hydroxide ons (OH¯) to the solution.
Why is it necessary to run TLC in a closed container and to have the interior vapor saturated with the solvent? What error is introduced into the determination of an Rf value if the top is left off of the developing chamber?
Answer:
See explanation
Explanation:
Rf value is known as retention factor.The retention factor of a particular material is the ratio of the distance the spot moved above the origin to the distance the solvent front moved above the origin(Harper College).
TLC is carried is out in a closed container and the interior is saturated with the solvent vapor in order to have a maximum resolution between components this prevents solvent from evaporating from the system.
Peradventure the solvent for the separation is partly or wholly lost due to an open container, the Rf value would be lower than the expected value.
What volume (mL) of 0.250 M HNO3 is required to titrate (neutralize) a solution containing 0.276 g of KOH?
Answer:
Volume = 19.68 ml
Explanation:
The equation of the reaction is given as;
HNO3 + KOH ---> KNO3 + H2O
1 mol of HNO3 reacts 1 mol of KOH
Converting 0.276 g of KOH to mol;
Number of moles = Mass / Molar mass
Number of moles = 0.276g / 56.1056 g/mol
Number of moles = 0.00492
Since the mole relationship is 1 = 1;
This means 0.00492 mol of HNO3 reacts with 0.00492 mol of KOH
The relationship between molarity and volume id given as;
Molarity = Number of moles / Volume
Volume = Number of moles / Molarity = 0.00492 mol / 0.250 M
Volume = 0.01968 L
Volume = 19.68 ml
What can she find out from her experiment?
A. If soaked bean seeds sprout faster
B. If dry bean seeds require more water
C. If dry bean seeds produce taller plants
D. If soaked bean seeds require more sunlight
Answer:
B. If dry bean seeds require more water
I hope it is helpful..
Many homes that are not
connected to public sanitary
sewers might dispose of
sewage using a(n)
Answer:
pump that is the answer hope its right