which has the most atoms? 20g C or 70g Zn

Answers

Answer 1

Therefore, the 20g of C has more atoms than the 70g of Zn.

How is number of atoms determined?

To determine which sample has the most atoms, we need to use Avogadro's number, which is the number of atoms in a mole. Avogadro's number is approximately 6.022 x 10^23 atoms/mole.

First, we need to determine how many moles of each substance we have. We can do this by dividing the given mass by the molar mass of the element. The molar mass of carbon (C) is approximately 12 g/mol, and the molar mass of zinc (Zn) is approximately 65 g/mol.

For 20g of C:

moles of C = 20 g / 12 g/mol ≈ 1.67 moles

For 70g of Zn:

moles of Zn = 70 g / 65 g/mol ≈ 1.08 moles

Now, to determine the number of atoms, we can multiply the number of moles by Avogadro's number.

For 20g of C:

number of atoms = 1.67 moles x 6.022 x 10^23 atoms/mole ≈ 1.00 x 10^24 atoms

For 70g of Zn:

number of atoms = 1.08 moles x 6.022 x 10^23 atoms/mole ≈ 6.50 x 10^23 atoms

Therefore, the 20g of C has more atoms than the 70g of Zn.

Learn more about moles here:

brainly.com/question/26416088

#SPJ1


Related Questions

What is the molarity of 2. 0 liters of an aqueous solution that contains 0. 50 mole of potassium iodine, KI?

Answers

The molarity of 2. 0 liters of an aqueous solution that contains 0. 50 mole of potassium iodine, KI is 0.25 M.  

The molarity of an aqueous solution can be calculated using the following formula:  

Molarity = moles of solute / liters of solution.

In this case, we have 0.50 mole of potassium iodine (KI) and 2.0 liters of solution.

Plugging these values into the formula, we get:
Molarity = 0.50 mole / 2.0 liters = 0.25 M
The molarity of the aqueous solution is 0.25 M.

Molarity is a unit of concentration that is commonly used in chemistry. It is defined as the number of moles of solute per liter of solution. The symbol for molarity is M, and it is expressed in units of moles per liter (mol/L).

Molarity is an important concept in chemistry because it allows scientists to describe the concentration of a solution in a quantitative way. It is often used in laboratory experiments to determine the amount of reactant needed or the amount of product produced in a chemical reaction.

For more question on molarity click on

https://brainly.com/question/30404105

#SPJ11

An intoxicated driver has 12ml ethy alcohol in his blood. Calculate molarity

Answers

The molarity is 0.000052 Molar for an intoxicated driver who has 12ml ethyl alcohol in his blood.

We must be aware of the molecular weight of ethyl alcohol to compute molarity (C2H5OH).

Ascertaining the atomic weight of C2H5OH yields the accompanying outcomes: (1 x 16.00 g/mol for oxygen) + (2 x 12.01 g/mol for carbon) + (6 x 1.01 g/mol for hydrogen) = 46.07 g/mol

We presently need to realize how much blood the 12 ml of ethyl liquor break up to decide the molarity of ethyl liquor in the driver's blood. Expect the driver to have a blood volume of 5 liters generally speaking (5000 ml).

To get the quantity of ethyl alcohol in moles, multiply 12 ml by (1 L/1000 ml) x (1 mol/46.07 g) to get 0.00026 mol.

It is possible to compute the amount of ethyl alcohol in the driver's blood as follows: 0.00026 mol/5 L = 0.000052 M

The amount of ethyl alcohol in the driver's blood is thus 0.000052 Molar.

Learn more about the molarity at

https://brainly.com/question/8732513

#SPJ4

0.4 L of a citric acid solution was used to neutralize 0.2 L of a 0.7M NaOH solution. How
many moles of citric acid will neutralize it? Find the molarity of the citric acid?

Answers

Number of moles of citric acid used to neutralize the NaOH solution is 0.0467 mol, and the molarity of the citric acid solution is 0.1168 M.

What is molarity?

Ratio of a solvent's moles to a solution's total liters is defines as molarity.

As moles of NaOH = moles of citric acid

and moles of NaOH = volume of NaOH solution x concentration of NaOH

moles of NaOH = 0.2 L x 0.7 M

moles of NaOH = 0.14 mol

Since citric acid and NaOH react in a 1:3 molar ratio (i.e., one mole of citric acid reacts with three moles of NaOH), the number of moles of citric acid used to neutralize the NaOH solution is:

here, moles of citric acid = (moles of NaOH)/3

moles of citric acid = 0.14 mol / 3

So, moles of citric acid = 0.0467 mol

molarity of citric acid = moles of citric acid / volume of citric acid solution (in L)

molarity of citric acid = 0.0467 mol / 0.4 L

So, molarity of citric acid = 0.1168 M

Therefore,  number of moles of citric acid used to neutralize the NaOH solution is 0.0467 mol, and the molarity of the citric acid solution is 0.1168 M.

To know more about molarity, refer

https://brainly.com/question/14469428

#SPJ1

Question 4 of 10
The ACT science test takes______ minutes.
O A. 60
B. 30
O C. 35
OD. 45

Answers

The science portion of the ACT takes 35 minutes.

An experiment was carried out to make lead chloride from lead nitrate. 14. 0 g of lead chloride were obtained from 16. 9 g of lead nitrate. Determine the percentage yield of lead chloride

Answers

Moles of lead nitrate used mol Product mass Molar mass Pb 207 g/mol Molar mass N 14 g/mol Molar mass o 16 g/mol =  56 .65 %

moles of Pb([tex]NO_{3}[/tex]) = 14.8 / 331 = 0.0447

∵ moles = mass / molar mass

[tex]Pb(NO_{3}) + 2Cl = pbcl_{2} + 2NO_{3}[/tex]

[tex]\frac{moles of Pb (NO_{3}) }{1} = \frac{moles of Pbcl_{2} }{1}[/tex]

moles of [tex]Pbcl_{2}[/tex] = 0.0447

Theoretical mass of [tex]Pbcl_{2}[/tex] = moles * molar mass

= 0.0447 * 278

= 12.4266

% yield = Actual mass of [tex]Pbcl_{2}[/tex] / Theoretical mass of [tex]Pbcl_{2}[/tex] * 100

= [tex]\frac{7.04}{12.4266} * 100[/tex]

= 56 .65 %

Lead(II) chloride (PbCl2) is an inorganic compound that is white strong under surrounding conditions. It is ineffectively solvent in water. Lead(II) chloride is one of the main lead-based reagents. It likewise happens normally as the mineral cotunnite.

To know more about chloride click here.

brainly.com/question/15296925

#SPJ4

the complete question is:

Begin Scenario An experiment was carried out to make lead chloride from lead nitrate. 7.04 g of lead chloride was obtained from 14.8 g of lead nitrate. Determine the percentage yield of lead chloride. Reactant mass 14.8 g 7.04 g a Determine the moles of lead nitrate, PbNO3, used in the experiment (To avoid introducing rounding errors on intermediate calculations, enter your answer to four significant figures.) Moles of lead nitrate used mol Product mass Molar mass Pb 207 g/mol Molar mass N 14 g/mol Molar mass o 16 g/mol

Which set of products is correct for
this double replacement reaction?
AgNO3(aq) + Na₂CO3(aq) →
Remember that each formula must
have a balanced charge.

Answers

The double replacement reaction's chemical equation for balancing between AgNO3(aq) and Na2CO3(aq) is: 2AgNO3(aq) + Na2CO3(aq) → Ag2CO3(s) + 2NaNO3(aq)

What effects do you anticipate when NaCl and AgNO3 solutions are combined?

When sodium chloride (NaCl) solution and silver nitrate (AgNO3) are mixed, the ions of both compounds exchange. The consequence is the formation of white precipitates of sodium nitrate solution (NaNO3) and silver chloride (AgCl).

How can NaCl be used to standardise AgNO3?

Take a known quantity of standard sodium chloride (e.g., 10 mL diluted to 100 mL for standardised 0.0141 N agNO3 or 50 mL diluted to 100 mL for standardised 0.141 N agNO3). Add 1.0 mL of K2CrO4 indicator solution, 1 spatula of calcium carbonate, and titrate the mixture with AgNO3 to a pinkish-yellow endpoint.

To know more about mixture visit:-

https://brainly.com/question/24898889

#SPJ1

the concentration of o2 in water is 0.590g per liter at an oxygen pressure of around 15.5 atm. what is the henry's law constant for o2

Answers

The Henry's law constant for O2 in water given the concentration of O2 in water is 0.590 g/L and an oxygen pressure of around 15.5 atm is 4.42 x 10^-4 M/atm.

Henry's Law relates to the concentration of a gas dissolved in a solvent to the pressure of that gas in equilibrium with the solvent. According to Henry's Law, the concentration of gas in a liquid is directly proportional to the partial pressure of the gas in the atmosphere over the liquid. The law is as follows: c = kPwhere c is the concentration of the gas in the liquid, P is the partial pressure of the gas in the atmosphere over the liquid, and k is a proportionality constant known as the Henry's law constant. To find the value of Henry's Law constant for O2 in water, we will use the formula: k = c / P Given that the concentration of O2 in water is 0.590 g/L and the oxygen pressure is 15.5 atm, we can substitute these values to find the value of Henry's law constant. k = c / Pk = (0.590 g/L) / (15.5 atm)k = 0.038 M/atm

The value of Henry's Law constant for O2 in water is 0.038 M/atm.

Know more about Henry's Law

https://brainly.com/question/23204201

#SPJ11

Would the reaction A + 2B + energy --> AB₂ be an endothermic or exothermic reaction?

endothermic

exothermic

The value of the energy is needed to determine if energy is released or absorbed in this reaction.

Answers

Unable to tell if this process is endothermic or exothermic because it is not stated whether energy is released or absorbed.

What is energy?

Energy has the ability to perform work. It is a quantifiable quality that may be transferred to a physical system or body, and it can be seen when work is being done. Potential, kinetic, thermal, electrical, chemical, and radioactive forms of energy can all exist.

The energy shift that takes place during the reaction determines the type of reaction, whether it is exothermic or endothermic. It is an exothermic reaction if energy is released during the reaction. On the other side, a reaction is said to be endothermic if energy is absorbed during it[2]. According to the chemical equation, a + 2b + energy ab2.

You can tell whether a chemical process releases or absorbs energy overall by measuring the enthalpy of the reaction. The heat energy change that occurs as reactants turn into products is known as a reaction's enthalpy(H). H is positive if heat is absorbed throughout the process; if heat is emitted, H is negative. Exothermic processes have enthalpies that are less than zero and, as a result, are negative, while endothermic reactions have enthalpies that are more than zero and, as a result, are positive.

We cannot tell if this chemical reaction is endothermic or exothermic because the chemical equation contains no information about the value of energy.

To know more about energy, visit:

https://brainly.com/question/1932868

#SPJ1

Will a supersaturated solution return back to being a saturated solution once a solute crystal has been added?​

Answers

Yes, a supersaturated solution will return back to being a saturated solution once a solute crystal has been added.

Supersaturated solution explained.

A supersaturated solution is a solution that contains more dissolved solute than would be possible under normal circumstances at a given temperature and pressure. In a supersaturated solution, the solute molecules are able to remain dissolved in the solvent even though they would normally begin to precipitate out of the solution. This can happen when a solution is prepared by dissolving a solute in a solvent at an elevated temperature and then cooling the solution rapidly, preventing the solute from crystallizing out of the solution. Supersaturated solutions are often unstable and will eventually return to a saturated state if given the opportunity to do so, such as by the addition of a seed crystal or agitation of the solution.

When a solute crystal is added to a supersaturated solution, it provides a nucleation site for the solute to crystallize. As the solute molecules attach to the crystal, they are removed from the solution, causing the concentration to decrease. Eventually, the concentration will decrease to the point where it becomes saturated, and no more solute will dissolve.

Thus, adding a solute crystal to a supersaturated solution causes the excess solute to come out of the solution and return it to a saturated state.

Learn more about supersaturated solution below.

https://brainly.com/question/20536909

#SPJ1

The balanced chemical equation showing between quicklime and water is

Answers

The balanced chemical equation for the reaction between quicklime (calcium oxide, CaO) and water (H2O) is as follows:

CaO + H2O → Ca(OH)2

This equation represents a classic example of an acid-base reaction, in which the calcium oxide, which is a basic oxide, reacts with water, a proton donor, to form calcium hydroxide, a strong base. The reaction is exothermic and releases a significant amount of heat, making it useful for various industrial applications, such as in cement production and as a desiccant.

Calcium hydroxide, also known as slaked lime, is a white crystalline solid that is sparingly soluble in water and has many applications in agriculture, construction, and environmental remediation.

For such more questions on Quicklime

https://brainly.com/question/17325078

#SPJ4

State two advantages of buying concentrated products rather than dilute products

Answers

Two advantages of buying concentrated products rather than dilute products are that they are generally more cost-effective than dilute products because they require less packaging, transportation, and storage space. And the second advantage is that concentrated products offer greater flexibility and customizability compared to dilute products.

What is more harmful - concentrated or dilute chemicals?

The level of harm a chemical poses depends on various factors, including the specific chemical involved, its concentration, and the mode of exposure. In general, concentrated and dilute chemicals can be harmful if used or mishandled.

Why are concentrated chemicals considered hazardous?

Concentrated chemicals can be particularly hazardous because they contain a higher concentration of the active ingredient, which means that a smaller amount of the chemical can have a more potent effect. This can increase the risk of accidental exposure, which can be dangerous or even fatal.

To learn more about acid, visit here:

https://brainly.com/question/14072179

#SPJ1

A 2. 0-L balloon at room temperature (20. 0°C) is placed in a refrigerator at 3. 0°C. What is the volume of the balloon after it cools in the refrigerator?

Answers

The balloon has a 1.88 L volume after cooling in the fridge.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P₁V₁)/T₁ = (P₂V₂)/T₂

Where P is pressure, V is volume, and T is temperature. We can assume that the pressure remains constant since the balloon is open to the atmosphere. Thus, we can simplify the equation to:

(V₁)/T₁ = (V₂)/T₂

Substituting the given values, we have:

V₂ = (V₁ x T₂) / T₁

V₂ = (2.0 L x 276.15 K) / 293.15 K

V₂ = 1.88 L

Therefore, the volume of the balloon after cooling in the refrigerator is 1.88 L.

To learn more about volume refer to:

brainly.com/question/14710169

#SPJ4

a solution made by adding solid sodium hypochlorite (naclo) to enough water to make 2.00 l of solution has a ph of 10.50. calculate the number of moles of naclo that were added to the water.

Answers

The number of moles of NaClO that were added to the water are calculated to be 6.23 × [tex]10^{-11}[/tex] mol.

In this case, we know that the pH of the solution is 10.50. Using the formula of pH, we can find the concentration of hydrogen ions.

The pH of a solution can be calculated using the following formula:

pH = -log[[tex]H^+[/tex]]

where [[tex]H^+[/tex]] is the concentration of hydrogen ions in the solution.

Plugging in the values.

10.50 = -log[[tex]H^+[/tex]]

[tex][H^+]=10^{10.50}[/tex]

[tex][H^+] =3.162 \times 10^{-11} mol/L[/tex]

Now, let us find concentration of NaClO.

Since sodium hypochlorite is a salt, it dissociates in water to form ions.

The balanced equation for the dissociation of sodium hypochlorite is:

NaClO(s) → [tex]Na^+(aq) + ClO^-(aq)[/tex]

The concentration of sodium hypochlorite can be calculated from the concentration of hypochlorite ions using the stoichiometry of the reaction.

Since there is a 1:1 ratio between NaClO and , the concentration of NaClO is also [tex]3.162 \times 10^{-11} mol/L[/tex].

To find the number of moles of NaClO added to the solution, we need to multiply the concentration by the volume:

moles NaClO = concentration x volume

moles NaClO = [tex]3.162 \times 10^{-11} mol/L \times 2L[/tex]

moles NaClO = 6.23 × [tex]10^{-11}[/tex] mol.

Therefore, the number of moles of NaClO that were added to the water is 6.23 × [tex]10^{-11}[/tex] mol..

To learn more about pH refer:

brainly.com/question/30934747

#SPJ11

How many g of water are needed to create a 4 molal solution with 9 moles of naOH

Answers

To make a 4 molal solution using 9 mol of NaOH, we need 2250 g of water.

How can the mass of water needed to make a 4 molal solution with 9 mol of NaOH be calculated?

NaOH mass equals moles of NaOH times its molar mass, or 360.00 g.

Molality is defined as moles of solute divided by kilograms of solvent.

When we rewrite the equation, we obtain:

mass of the solvent is equal to the product of the solute's moles and its molality.

Inputting the values provided yields:

mass of the solvent equals 9 mol/4 mol/kg

2.25 kg is the solvent's mass.

The mass of water is then converted from kilogrammes to grammes:

2.25 kg times 1,000 g/kg is the mass of water.

water weighs 2250 g.

To learn more about molal solution visit:

brainly.com/question/26921570

#SPJ1

The reaction system CO(g) + 2 H2(g) = CH3OH(g) is at equilibrium. When H2 is added to the container, the reaction shifts to the right the partial pressure of Co does not change and the partial pressure of CH3OH decreases

Answers

The reaction system CO(g) + 2 H2(g) = CH3OH(g) is at equilibrium, meaning that the rate of the forward reaction is equal to the rate of the reverse reaction. If H2 is added to the container, the forward reaction becomes favoured and shifts to the right. This increases the amount of products (CH3OH) formed, and decreases the amount of reactants (CO and H2). As a result, the partial pressure of CO remains the same, while the partial pressure of CH3OH decreases.

This is due to Le Chatelier's Principle, which states that when a system at equilibrium is subjected to an external stress, the system will adjust to minimize the stress. In this case, the stress is the addition of H2, which is favouring the formation of products and disrupting the equilibrium. The system responds by decreasing the amount of products formed and shifting the reaction back to equilibrium.

Know more about equilibrium here:

https://brainly.com/question/3920294

#SPJ11

Part a: determination of mass percent of iron (fe) mass of evaporating dish and unknown sample g mass of evaporating dish g mass of original sample g mass of evaporating dish after removing iron fillings g mass of fe g percent of fe in sample % calculations:

Answers

Fe's mass percent composition is equal to 55.85 g/mol times 329.27 g/mol, or 100%. Fe's mass percent composition is equal to 0.1696 times 100%. Fe has a mass percentage composition of 16.96%.

Mass percent is best expressed using the formula mass percentage  mass of chemical x measure the mass of combination) x 100. To express the amount as a percentage, multiply the value at the top by 100.

Titanium (35 percent), oxygen (30 percent), silicate (15 percent), and aluminium make up the majority of the Earth's mass (13 percent).

The mass percent is determined by dividing the amount of compound or solute by the amount of the component or solute. A percent is obtained by multiplying the result by 100. A compound's composition can be determined by applying the formula: mass percentage = (mass of element in 1 mole of compound /mass of 1 mole of compound ) 100.

To know more about Mass Percent click here .

brainly.com/question/5394922

#SPJ4

                                 "Complete question"

Lab Report Sheet: Part A: Determination of Mass Percent of Iron (Fe) Mass of evaporating dish and unknown sample _____ g Mass of evaporating dish _____ g Mass of original sample _____ g Mass of evaporating dish after removing iron fillings _____ g Mass of Fe _____ g Percent of Fe in sample _____ % Calculations: fill in the blanks.

Ascorbic acid has a molar mass of 176. 14 g/mol. What is the molecular formula of ascorbic acid?

Answers

The molecular formula of Ascorbic acid is C6H8O6 having the molar mass of 176.14 g/ mole.

Ascorbic acid is known as the chemical name for Vitamin C. Ascorbic acid is commonly found in high concentrations in citrus fruit. This acid is also found in tomatoes, broccoli, and many other fruits and vegetables. Vitamin C is a nutrient of the body needs to form blood vessels, cartilage, muscle and collagen in bones. This vitamin is also vital to the body's healing process.

A molecular formula is defined as a chemical formula of a molecular compound that shows the kinds and numbers of atoms present in a molecule of the compound. This is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule using chemical element symbols and numbers.

A molecule of the ascorbic acid will have a mass of 176.124 atomic mass units.

This is determined by adding 6 X 12.011 for carbon + 8 X 1.008 for hydrogen + 6 X 15.999 for oxygen.

This is equals to the 72.066 for carbon + 8.064 for hydrogen + 95.994 for oxygen. Added together, these equal 176.124 molecular mass.

To learn more about  Ascorbic acid

https://brainly.com/question/16996726

#SPJ4

assuming you have an agonist, a competitive antagonist, and an easy assay for measuring binding of the agonist, describe a simple experiment that would allow you to determine specific binding, nonspecific binding, and total binding of the agonist at a single concentration.

Answers

A simple experiment to determine the specific binding, nonspecific binding, and total binding of an agonist at a single concentration would involve the following steps:

1. Pre-incubate a set of samples containing the agonist and various concentrations of the competitive antagonist. This will allow you to calculate the fractional inhibition of binding (FIB) of the agonist by the antagonist.

2. Use the easy assay to measure the binding of the agonist to its target. This will give you the total binding of the agonist.

3. To calculate the nonspecific binding of the agonist, subtract the total binding from the FIB. This will give you an estimate of the amount of agonist that binds to sites other than the target.

4. Finally, to calculate the specific binding of the agonist, subtract the nonspecific binding from the total binding. This will give you an estimate of the amount of agonist that binds to its target.

Using this experiment, you can quickly determine the specific, nonspecific, and total binding of an agonist at a single concentration. This is a valuable tool for understanding how drugs interact with their targets and can be used to optimize drug design and development.

Know more about agonist here:

https://brainly.com/question/14286421

#SPJ11

when a glucose molecule loses a hydrogen atom as the result of an oxidation-reduction reaction, the molecule becomes group of answer choices hydrogenated. reduced. hydrolyzed. oxidized.

Answers

The molecule becomes oxidized when a glucose molecule loses a hydrogen atom due to an oxidation-reduction reaction.

Let's understand this in detail:

1. Oxidation is when the loss of electrons or gain of oxygen atoms takes place from an atom or molecule. In a chemical reaction, if a molecule is oxidized, it will lose electrons or hydrogen or gain oxygen atoms. Oxidation leads to the loss of electrons, resulting in the molecule becoming more positively charged.

2. Reduction is a process in which there is the gain of electrons or loss of oxygen atoms from an atom or molecule. In a chemical reaction, if a molecule is reduced, it will gain electrons or hydrogen or lose oxygen atoms. Reduction leads to the gain of electrons, making the molecule more negatively charged.

3. Glucose is a simple sugar that is the primary energy source for the body's cells. Glucose is a carbohydrate broken down during cellular respiration in the presence of oxygen to produce ATP molecules.

4. The molecule becomes oxidized when a glucose molecule loses a hydrogen atom due to an oxidation-reduction reaction. Oxidation leads to the loss of electrons, resulting in the molecule becoming more positively charged.

Learn more about oxidation-reduction: Describe the process of oxidation in terms of electrons AND energy. https://brainly.com/question/25886015

A gummy bear has a mass of about 2.3 g and a volume if about 1 mL. About 12% of the mass of the gummy bear is sugar. Estimate the sugar concentration in a gummy bear.

Answers

To estimate the sugar concentration in a gummy bear, we first need to determine the mass of sugar in the gummy bear.

Given that the gummy bear has a mass of 2.3 g and 12% of its mass is sugar, we can calculate the mass of sugar in the gummy bear as follows:

Mass of sugar = 12% x 2.3 g = 0.276 g

Next, we need to convert the volume of the gummy bear to liters, since concentration is typically expressed in units of moles per liter. Since 1 mL = 0.001 L, the volume of the gummy bear is:

Volume of gummy bear = 1 mL = 0.001 L

Now we can calculate the sugar concentration in the gummy bear in units of moles per liter. The molar mass of sugar is about 342 g/mol, so the number of moles of sugar in the gummy bear is:

Number of moles of sugar = 0.276 g / 342 g/mol = 0.000807 mol

Therefore, the sugar concentration in the gummy bear is:

Sugar concentration = number of moles of sugar / volume of gummy bear

= 0.000807 mol / 0.001 L

= 0.807 mol/L

So, the estimated sugar concentration in a gummy bear is 0.807 mol/L.

To know more about concentration, visit :

https://brainly.com/question/10725862

#SPJ1

A 100.0 gram sample of Polonium- 210 is contained for 828 days. How many half lives occur during this period of time, if the half live us 138 days?

Answers

Answer:

4 half-lives will occur during this period of time.

Explanation:

Formula used :

where,

a = amount of reactant left after n-half lives and

time t = Initial amount of the reactant.

decay constant = half life of an isotope

n = number of half lives

We have :

a = ?

t = 552 days

n = 4

4 half-lives will occur during this period of time.

DO MARK BRAINLIEST!HAPPY LEARNING!

Balance the chemical reaction by using an atom inventory.

What is the correct whole number coefficient for N2?

[ ? ]N2 + [ ] H2 -> [ ] NH3

Answers

For N2, 1 is the right whole number coefficient. N2 + 3H2 → 2NH3 is the balanced chemical reaction.

Balanced chemical equations: what are they?

Equal numbers and types of each atom appear on both sides in case of balanced chemical equations, which is why they are called so. A balanced equation must have coefficients that are the simplest whole number ratio. For the chemical equation to adhere to the rule of conservation of mass, it must be balanced.

What are chemical equations that are balanced and unbalanced?

Equal numbers of atoms from various elements are present in both the reactants and the products in balanced chemical equations. Different elements' atom counts in the reactants and products of unbalanced chemical equations are varied.

To learn more about balanced chemical equations visit:

brainly.com/question/28294176

#SPJ1

steve jobs was said to be one of the most charismatic leaders in history. those who worked with him were inspired by his enthusiasm and optimism. when speaking to his company, he loved to use words like "extraordinary," "amazing," and "incredible." people couldnt help but mirror his excitement. the leadership of steve jobs could best be described as what kind of leadership theory?
a. situational theory
b. contingency theory
c. transactional theory
d. relationship theory

Answers

Answer:

The leadership of Steve Jobs could best be described as a transformational leadership theory. Transformational leaders inspire and motivate their followers by creating an inspiring vision and encouraging creativity, innovation, and change. They also use emotional appeals to get followers to invest in the vision and create a sense of unity and common purpose among the team. Steve Jobs' use of enthusiastic language and charisma to inspire his team reflects the qualities of a transformational leader.

The atmosphere consists mainly of nitrogen and oxygen, small amounts of carbon dioxide, and trace amounts of hydrogen. Does the atmosphere consist of polar or nonpolar compounds?

Answers

The atmosphere mainly consists of nonpolar compounds, namely nitrogen and oxygen gases, with only small amounts of polar carbon dioxide and trace amounts of polar hydrogen

Many common things you use regularly are colloids except .......
-milk
-hair
-spray
-paint
-alloy

Answers

Answer:

Hair

Explanation:

Colloid is used as thickening agents in industrial products, such as toothpaste, paints, inks, etc. Milk is one of the most common colloids, because of the thickening agents. spray, clouds, fog, etc., are a type of colloid. Paint is a type of colloid because it disperses particles through the paint. Alloy is an example of a colloidal solution. Hair does not have anything to do with colloid.

A sealed flask contains
3.6 atm H2 gas and
1.8 atm 02 gas.
What is the total pressure in the
flask in atm?

Answers

Expert-Verified Answer
The total pressure in the flask in atm would be 6.4 atm

When 1 mole of methane (CH4) is burned it releaes 326.3 KJ of heat.
Calculate ΔH for a process in which 8.7 g of methane is burned.
Answer Question 17 kJ

Answers

1 mole of methane (CH4) is burned it releaes 326.3 KJ of heat then the ΔH for the process in which 8.7 g of methane is burned is 176.8 kJ.

the number of moles of methane in 8.7 g:

molar mass of CH4 = 12.01 + 4(1.01) = 16.05 g/mol

moles of CH4 = 8.7 g / 16.05 g/mol = 0.542 moles

Now, we can use the given information to calculate the heat released:

ΔH = q/n

where q is the heat released and n is the number of moles of methane.

ΔH = (326.3 kJ/1 mol) x (0.542 mol) = 176.8 kJ.

Methane is a chemical compound that consists of one carbon atom and four hydrogen atoms, with the chemical formula CH4. It is a colorless, odorless, and flammable gas that is the main component of natural gas. Methane is the simplest hydrocarbon molecule and is a major contributor to greenhouse gas emissions. It is produced naturally by the breakdown of organic matter in wetlands, rice paddies, and the digestive systems of some animals.

Learn more about Methane here:

https://brainly.com/question/2127750

#SPJ1

30 POINTS ANYONE?????????

Answers

9.0 moles of Na3PO4 will form from 9.0 moles of H3PO4, rounded to the tenths place.

How to solve

To determine how many moles of Na3PO4 form from 9.0 mol H3PO4, we need to use stoichiometry.

First, we'll identify the mole ratio between H3PO4 and Na3PO4 in the balanced chemical equation:

3NaOH + H3PO4 → 3H2O + Na3PO4

From the balanced equation, we can see that the mole ratio between H3PO4 and Na3PO4 is 1:1.

This means that for every 1 mole of H3PO4 reacted, 1 mole of Na3PO4 is produced.

Since we have 9.0 mol H3PO4:

9.0 mol H3PO4 * (1 mol Na3PO4 / 1 mol H3PO4) = 9.0 mol Na3PO4

So, 9.0 moles of Na3PO4 will form from 9.0 moles of H3PO4, rounded to the tenths place.

Read more about molar mass here:

https://brainly.com/question/21334167
#SPJ1

How oxides of nitrogen cause acid rain​

Answers

Acid deposition is caused when sulphur dioxide (SO2) and nitrogen oxides (NOx) are emitted into our atmosphere. These chemicals SO2 and NOx, react with water, oxygen and other chemicals to form both sulphuric and nitric acids.

Nitrogen oxides react with water vapour in the atmosphere to form nitric acid (a type of acid rain) that can erode limestone statues, harm marine life and cause respiratory problems

what is the definition of effusion? group of answer choices the average distance travelled by a molcule after hundreds of collisions. the average distance travelled by a particle between collisions. the leakage of gas molecules from a container through a tiny hole the spreading of gas molecules through space.

Answers

Effusion can be defined as the leakage of gas molecules from a container through a tiny hole.

Effusion is one of the important physical properties of gases. It is defined as the process in which gas molecules pass through a tiny hole from one compartment to another. Effusion is based on Graham's law which states that "the rate of effusion of a gas is inversely proportional to the square root of its molecular mass or weight. "This law was proposed by Thomas Graham in 1846. It states that the effusion rate of a gas is inversely proportional to the square root of its molar mass.

Know more about effusion

https://brainly.com/question/2097955

#SPJ11

The definition of effusion is the leakage of gas molecules from a container through a tiny hole.

Effusion refers to the process by which a gas flows through a tiny hole in a container into an area of lower pressure. The rate of effusion can be influenced by factors such as the size of the hole, the mass of the gas molecules, and the temperature of the gas. In effusion, the gas molecules move from an area of higher pressure to an area of lower pressure.

The rate of effusion is influenced by several factors, including the size of the hole, the mass of the gas molecules, and the temperature of the gas. The rate of effusion is directly proportional to the average velocity of the gas particles. Therefore, lighter molecules will effuse faster than heavier molecules. The average distance travelled by a particle between collisions is called mean free path while the spreading of gas molecules through space is called diffusion. Therefore, the answer to the question is "the leakage of gas molecules from a container through a tiny hole."

To know more about effusion, refer here:

https://brainly.com/question/28320456#

#SPJ11

Other Questions
Would the reaction A + 2B + energy --> AB be an endothermic or exothermic reaction?endothermicexothermicThe value of the energy is needed to determine if energy is released or absorbed in this reaction. in a situation where the investor exercises significant influence over the investee, which of the following entries is not actually posted to the books of the investor? (i) debit to the investment account, and a credit to the equity in investee income account. (ii) debit to cash (for dividends received from the investee), and a credit to investment income account. (iii) debit to cash (for dividends received from the investee), and a credit to the dividend receivable. group of answer choices entries ii and iii. entry i only. entry ii only. entry iii only. entries i and ii. Describe and identify problems relating to data management You find a bond with 19 years until maturity that has a coupon rate of 8 percent and a yield to maturity of 7 percent. What is the Macaulay duration? The modified duration? Twelve-year-old Tommy's family moved to a new city, which resulted in leaving all his friends behind. Tommy had a difficult time adjusting both socially and academically. His father suggested he try out for the soccer team and his life improved both socially and academically. Consider the benefits of meeting his need to belong and explain why his situation improved. 2. Which best characterizes the Reagan Administration's response to the AIDS epidemic?fearinactionfunding Please help!What is the principal square root? And why is it used when solving radicalpolynomials? A pitcher throws a 0.15-kg baseball accelerating it from rest to a speed of about 90 m/s .estimate the force exerted by the pitcher on the ball Green Mountain is a very __________ organization, delegating authority to lower level managers to encourage passion and commitment Why do men in the group stay away from marriage from the wife of baths tale? Show your work for every single one plssssss Describe how at a profit maximizing level of output in the imperfectly competitive markets (Monopoly, Monopolistic Competition and Oligopoly) allows there to be waste of productive resources (hint: are Firms within the industries in any of these markets operating at the level of output where their average total cost is minimized?). AMD offers 5 percent coupon bonds with semiannual payments and a yield to maturity of 8 percent. The bonds mature in 20 years. What is the market price per bond if the face value is $1,000? 06 two silt spaced 0. 450mm apart are placed 75. 0 cm from a screen. What is the distance between the second and third dark line of the interference pattern on the screen when the silt are illuminated with coherent light with a wave length of 500nm What are the key features of "The Non-Shedder Shampoo" from Pride and Groom, and how can it effectively help reduce shedding in dogs? I will mark you brainiest!In a proof to show two triangles are congruent if a given is PR CK, which of the following statements most likely will be used within the proof?A) PR and CK are congruent.B) PR and CK are similar.C) PR and CK form acute angles.D) PR and CK form right angles. Polyurea is a synthetic material that is often used as a waterproof coating. Polyurea is useful because it is not reactive chemically. This means it does not break down easily.Considering this information, what is likely a negative impact of polyurea?A.It has toxic effects on nearby wildlife.B.It does not break down after it is disposed of.C.It damages materials that it comes in contact with.D.It needs to be reapplied to surfaces frequently. Together, teammates Pedro and Ricky got 2686 base hits last season. Pedro had 280 more hits than Ricky. How many hits did each player have? The density of some steel is 7.85 g/cm. What is the mass of 50 cm of this steel? Give your answer to 1 d. p. Finally, sales and direct cost data are combined with Processing and Supervising costs to determine product margins. Sales and Direct Cost Data: Product P3 Product G0 Sales (total) $140,100 $121,500 Direct materials (total) $47,500 $56,400 Direct labor (total) $78,200 $37,700 The activity rate for the Processing activity cost pool under activity-based costing is: