Answer:
kinetic energy
Explanation:
it is most common
How much work is done by 0.070 m3 of gas, when the volume remains constant with pressure of 63 x 105 Pa?
Answer:
W = 0 J
Explanation:
The amount of work done by gas at constant pressure is given by the following formula:
[tex]W = P\Delta V[/tex]
where,
W = Work done by the gas
P = Pressure of the gas
ΔV = Change in the volume of the gas
Since the volume of the gas is constant. Therefore, there is no change in the volume of the gas:
[tex]W = P(0\ m^3)\\[/tex]
W = 0 J
how can a sound of a different note be produced in a guitar without changing the length of wire?
Answer:
how tightly strung the wire is
-- Make the string tighter or looser.
-- Keep the same length, but make the string thicker or thinner.
-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.
Determine the mass of fuel required for the expected energy consumption in the United States for the next 10 years:
Provide the energy use per person per year in the United States = 3.5 × 1011 joules.
Base your calculations on a current population of 310,000,000.
Answer:
(This will depend on the type of fuel, I will assume that the fuel is petrol)
First, let's find the expected energy consumption in the US for the next 10 years.
We know that in one year, a person consumes 3.5*10^11 joules.
There are 310,000,00 people on the US
Then the total consumption in one year is:
310,000,000*3.5*10^11 joules = 1.085*10^20 J
In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:
10*1.085*10^20 J = 1.085*10^21 J
Now let's find the mass of fuel required.
We know that a liter of petrol has 31,536,000 joules of energy,
And a liter of petrol weights 0.75 kg
To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:
N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13
We will need 3.44*10^13 liters of petrol.
And the total mass of petrol will be:
M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.
Which is not true about the role of gravity in the formation of planets?
Dust and gas particles that were attracted to each other began to rotate into a protoplanetary disk.
Gravity between planetesimals caused them to join together into conglomerate clumps. Our solar system is the only place in the universe where gravity played a key part in the formation of planets.
Gravity of larger objects in orbit around the sun attracted, and cleared the orbital path of, smaller planetesimals, gas, and dust.
Our solar system is the only place in the universe where gravity played a key part in the formation of planets.
This is Flase
What process is represented by this redox equation ? 6H 2 O+6CO 2 C 6 H 12 O 6 +6O 2
What process is represented by this redox equation ?
6H 2 O+6CO 2 C 6 H 12 O 6 +6O 2
Answer:-This equation is of the process of photosynthesis. The proper equation is :-
6CO2+6H2O→C6H12O6+6O2.
is a
The wire in a simple circuit
which forms an
unbroken pathway, allowing the
electric charges to flow.
A. switch
B. insulator
C. resistor
D. conductor
Answer:
I believe the answer is D: Conductor.
The diagram below shows a periodic wave. Which two points on the wave are 180 degrees out of phase?
Please explain as well, thanks so much
Answer:
A and C are 180 deg out of phase (opposite points on a 360 deg wave)
The two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
When two points of wave are out of phase?The two points of a wave is said to be out of phase when they show up or down motion at different times.
If a point on the wave, say (X) is reached to the maximum or minimum point before the other point. Then these two points are said to be out of phase.
Also, when the points are 180 degree apart from each other. Which means if a point is in the crest of the wave and other is on the through.
The diagram below shows a periodic wave. In this diagram,
A and I are the end points of the periodic wave.B,C,D,E,F and G are the other points on the periodic wave.Here, the point A and C are opposite point of each other. So they are 180 degrees out of phase.Hence, the two points on the periodic wave which are 180 degrees out of phase are point A and Point C.
Learn more about the periodic wave here;
https://brainly.com/question/16749356
the spring constant for each of these springs 100 000 N m-1. Calculate the distance that each of these rear springs is compressed by this vehicle as shown in the diagram above
Answer:
sorry
Explanation:
over due by alot please help
Answer:
i would say the third one
Explanation:
may i be brainliest?
c) Explain the following.
Keftles, cooking pans and iron boxes have polished surfaces
Answer:
Polished surfaces reduce heat loss
Use the image above to answer the following for 2 points each:
1. Identify a point in the diagram where a divergent boundary is occurring and explain how it is interacting with the rock cycle.
2. Identify a point in the diagram where a divergent boundary is occurring and explain how it is interacting with the rock cycle.
3. Identify a point in the diagram where the rock cycle is occurring without a plate boundary and how it is interacting with the rock cycle.
Answer: the divergent one goes where it looks like there a crack because when you think about divergent it means dividing like seperating.(igneous rock) is where the divegent one goes.
the one that is no plate boundary is sedimentary rock and it occurs by because there is nothing there for it todo there
Explanation:
How many snowmen do you think this sled can destroy? Explain your answer.
Answer:
342,690
Explanation:
I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)
A solid metal ball with a mass of 10.0 kg is placed on a smooth floor what force would be needed to accelerate the ball at a rate of 2.0 m/s2.
40 N
20 N
5 N
0.2 N
What is the difference between the spectrum of an incandescent solid and the spectrum of an incandescent gas?
Incandescent solids emit bright-line spectra; incandescent gases emit continuous spectra.
Incandescent solids emit one wavelength; incandescent gases emit several wavelengths.
Incandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Incandescent solids emit scattered spectra; incandescent gases emit continuous spectra.
Answer:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
Explanation:
Materials when heated emit a continuous spectrum with all wavelengths.
Hot gas gases emit a spectrum that depends on the transitions between atomic states, therefore it is a discrete spectrum.
When reviewing the answers, the correct one is:
ncandescent solids emit continuous spectra; incandescent gases emit bright-line spectra.
can someone please help me please I will mark brainlist and give you 5 stars pleasee
Answer:
If I did my calculations correctly then the answer is 11 but I may be weong
Answer:
it's 11
gkccgkxcgikvxxkg
A skydiver uses a parachute to:
increase air resistance, which increases terminal velocity decrease air resistance, which decreases her mass
increase air resistance, which decreases terminal velocity increase air resistance, which decreases gravitational acceleration
increase air resistance, which decreases gravitational acceleration
As an electric current flows through the copper sulfate solution, copper settles on the negative electrode. How will the mass of the copper covering this electrode change if we increase the current by 4 times and halve its flow time?
Answer:
Ține ogaru ca să o lingă pe măta în cur să nu mai facă alt prost ca tine
What information is represented by the slope of a graph of displacement versus time (displacement-time graph)?
Light of wavelength 505 nm passes through a single slit of width 4.32 x 10-5 m. At what angle does the first interference minimum (m = 1) occur?
Answer:
0.665
Explanation:
I did the work. Just plug everything in from the formula. Look at the lesson manual.
1- Three 6-ohms resistors in a series circuit give equivalent resistance of
Answer:
The equivalent resistance of the three resistors is 18 ohms.
Explanation:
The value of three resistors are 6 ohms.
We need to find the equivalent resistance of the resistors. In series combination, the equivalent resistance is given by :
R = R₁ + R₂ + R₃ +.....
Put all the values,
R = 6+6+6
R = 18 ohms
Hence, the equivalent resistance of the three resistors is 18 ohms.
can someone help? i don’t need 14
Answer:
Explanation:
11.) d
12.) f
13.) c
15.) i
pls give me brainliest
What is the intensity of sound produced by an elephant's call if it has a power of 0.45 W and you are standing 32.5 m away from the lumbering beast
Answer:
I = 1.36 x 10⁻⁴ W/m²
Explanation:
The intensity of the sound produced by the Elephant can be calculated by using the following formula:
[tex]I = \frac{P}{A} \\\\[/tex]
where,
I = Intensity of sound = ?
P = power of sound = 0.45 W
A = area = πr² = π(32.5 m)² = 3318.3 m²
Therefore,
[tex]I = \frac{0.45\ W}{3318.3\ m^2} \\\\[/tex]
I = 1.36 x 10⁻⁴ W/m²
what does thermal energy do
Answer:
Thermal energy can be transferred to one object to another in the form of heat. It causes molecules and atoms to collide with each other because of the rising of heat.
Explanation: Well thermal energy is a example of kinetic energy. It is heated by motion. It is heat that can be measured
Heat is the measurement of energy from all the particles that are in a substance.
Please select the best answer from the choices provided : T/F
Explanation:
the correct answer is (true) if am not mistaking incase am wrong sorry
According to the graph, how many atoms would remain after two half-lives?
20 atoms
80 atoms
40 atoms
50 atoms
Answer:
Let No be initial no of atoms
N = N0 / 2 after 1 half-life
N = N0 / 4 after 2 half-lives
So after 2 half-lives 20 of the 80 atoms remain
The bumper cars crash into each other and stop. Explain why both bumper cars stop after the crash. [4marks]
Answer:
The collision is inelastic
Explanation:
There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.
However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.
I would assume its A. or B.
Answer:
B
Explanation:
remember that you are looking for the value of the graph
to take into account or value a lot: prize, estimate to value your opinion. 2nd: estimate or assign the monetary value of: appraise a necklace. b: qualify or scale in utility, importance or general value: evaluate. value.
Lithium has an atomic number of 3. How many electrons does it have?
A 4
B. 1
C. 2
D. 3
Answer:
it has 3 electrons. brainliest please
9. Bryce drove his car 10 km from his house to Belle Plaine. It took him 8 minutes. He got stopped at a long
traffic light on the return home and so he took 2 minutes longer on the return trip. What was Bryce's average
speed in km per minute? (3 pt)
Answer:
2 km/minuteExplanation:
Here, we are asked to calculate the average speed in km/minute.
As we know that,
Average speed = Total distance ÷ Total time takenHere,
→ Total distance = 10 km + 10 km
Because, he first drove 10 km from his house to Belle Plaine and then he again came back to his house.→ Total distance = 20 km
→ Total time = 8 minutes + 2 minutes
→ Total time = 10 minutes
Substitute the values in the formula of average speed,
→ Average speed = Total distance ÷ Total time taken
→ Average speed = 20km ÷ 10 minutes
→ Average speed = 2 km per minuteWhat charge does an object have if it has an excess of electrons?
Answer:
negative charge
Explanation:
On an atomic scale, those are called "ions", and negatively charged ions are called anions.