Which materials are used to make concrete select all that apply

Answer: 10.4

Explanation:

ph is just as follows:

[tex]pH = -log[H_{3}O^{+}][/tex]

So plugging in our concentration we get:

[tex]-log(4.45*10^{-11})=10.35163999...[/tex]

Then rounding to one decimal place takes us to pH = 10.4

Answer:

The bond between Phosphorus and Chlorine in PCl3 is covalent as chlorine needs one electron and phosphorus has metallic character and easily donate electron

Answer:

I think its b part or none of above

Answer:

i think

they are used to male the animal grow

Once the animal eats the food, the atoms in food are  used to make the animal grow.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

Explanation:

Lift the kitten's tail. The opening just under the tail is the anus. Below the anus is the genital opening which is round in males and is a vertical slit in females. In kittens of similar size, the distance between the anus and the genital opening is greater in the male than the female.

TW: use of inapropate words*

Answer:

not enough information to tell

Explanation:

One way you can tell this difference is the distance between the cat's genitals (organs seen on the outside of the body) and the anus.  A male will have a much greater distance between the genitals and anus than females, 1/2 inch apart on a male kitten and over 1 inch apart on a male adult cat.  However, if the two are almost adjacent on a kitten or less than 1/2 inch apart on an adult, it’s a female.

Answer:

490.83 oK

Explanation:

First of all, we better agree on the meaning of the word adiabatically. It means without the loss or gain of heat. So nothing is given up to or taken from the environment.

This also assumes that no change has occurred in the pressure.

T1 = 310 oK

T2 = ?

V1 = 12 L

V2 = 19 L

T1/V1 = T2/V2

310 / 12 = x/19            Multiply both sides by 19

310*19 / 12 = T2         Multiply 310 * 19 on the left.

5890 / 12   = T2         Divide by 12

490.83 = T2

Answer:

3 is correct answer I think

Explanation:

Labor unions arose in the nineteenth century as increasing numbers of Americans took jobs in factories, mines, and mills in the growing industrial economy.

The Knights of Labor, founded in 1869, was the first major labor organization in the United States. The Knights organized unskilled and skilled workers, campaigned for an eight hour workday, and aspired to form a cooperative society in which laborers owned the industries in which they worked.

The Knights’ membership collapsed following the 1886 Haymarket Square riot in Chicago. By 1886 the American Federation of Labor (AFL), an alliance of skilled workers’ trade unions, was growing.

Answer:

We know the initial volume of the potassium nitrate solution is 1.0 mL and the initial concentration is 2.0 M, we also know that an unknown volume of water was added to the solution, which diluted our concentration down to a final value of 0.008 M. We are trying to find the final volume.

Here we can use this formula since the initial and final solutions are proportional. Before that let's define our variables.

[tex]M_1 = 2.0 M\\V_1 = \frac{1.0 mL}{1000} = 0.001 L\\M_2 = 0.008 M\\V_2 = \ ?[/tex]

[tex]M_{1}V_{1} =M_2 V_2\\[/tex]

[tex](2.0)(0.001) = (0.008)V_2\\\\\frac{(2.0)(0.001)}{0.008} = V_2\\\\V_2 = 0.25 L \ or \ (0.25 \ * \ 1000) = 250 \ mL[/tex]

Therefore you would have 0.25 L or 250 mL of your final solution.

Answer: 2.1 minutes

Explanation: Based on the graph, what is the approximate half-life of the reaction shown below

Answer:

The concentration of the diprotic acid equals 3.4 M

We'll begin by writing the balanced equation for the reaction.

H₂X + 2NaOH —> Na₂X + 2H₂O

From the balanced equation above,

From the question given above, the following data were obtained:

MaVa / MbVb = nA/nB

(Ma × 25) / (1.95 × 87.42) = 1/2

(Ma × 25) / 170.469 = 1/2

Cross multiply

Ma × 25 × 2 = 170.469

Ma × 50 = 170.469

Divide both side by 50

Ma = 170.469 / 50

Ma = 3.4 M

Therefore, the concentration of the acid, H₂X is 3.4 M

Learn more about titration:

https://brainly.com/question/25624144

Answer:

The group that tests the variable.

Explanation:

The group that tests the variable is a control group.

Answer:

C when testing the group put the varible in control

Answer:

1) H - hydrogen - 1.100797

2) HE - helium - 4.00260

3) LI - lithum -6.941

Explanation:

On the periodic table the mass of carbon is reported as 12.01 amu. This is the average atomic mass of carbon. No single carbon atom has a mass of 12.01 amu, but in a handful of C atoms the average mass of the carbon atoms is 12.01 amu.

Answer:

I think the person is not move

Explanation:

b/c the net force is zero............. 100 w + 100 E

............... 100+(-100 = 0

Answer:

about 4 or 4.8

Explanation:

Answer:

100 m/ s²

Explanation:

Newton's Second Law of Motion:

[tex] \boxed{ \mathsf{force = mass \times acceleration}}[/tex]

___________________

In the question:

Note that the quantities here must be in their SI units.

SI unit of Force is Newton(N).

SI unit of mass is kilogram(kg)

Force is already in it's SI unit, while mass isn't.

Converting mass from grams to kilograms:

1000 g = 1 kg

=> 1 g = 1/ 1000 kg

=> 50 g = 50/ 1000 kg

= 1/ 20 kg

___________________

Calculating acceleration:

[tex] \mathsf{5 = \frac{1}{20} \times acceleration }[/tex]

multiplying both sides by 20:

[tex] \implies \mathsf{5 \times 20= (\frac{1}{20} \times 20)\times acceleration }[/tex]

20 on the RHS gets canceled, for it's present on the numerator as well as the denominator.

[tex] \implies \mathsf{100= acceleration }[/tex]

So, here, we got acceleration = 100 m/s².

Since, the other quantities used in the formula are in their SI units, acceleration must be in it's SI unit as well.

The SI unit of acceleration is m/s²

___________________

Answer:

[tex] \boxed{ \mathsf{100 \:m/s^2= acceleration }}[/tex]

Answer:

1. Ionic bonds result from transfer of electrons, but covalent bonds are formed by sharing.

2. Ions are arranged in a three-dimensional array (like crystals). Covalently bonded substances exist as discrete molecular units.

3. Ionic compounds often dissociate into ions in solution, but covalently bonded molecules retain their molecular identity in solution.

Hope this helps :)

Answer:

High trainability allows the owner to train the dog to handle certain things--some dog can be trained as police dogs and can be taught various jobs, so high trainability is very important

When a dog is Viscous, the dog will keep people away from your house, they will be able to keep danger away and because they are viscous they will be able to handle danger.

Loud bark- A loud bark from a dog can help alert other people when there is a intruder, it makes alot of noise so they can attract attention easily.

Quiet Bark- Ideal for pet owners who do not like noise, they bark quietly so they are not a bother to work or anyone doing something.

Answer:

The answer is energy. Please give me Brainliest!

Explanation:

Raising the concentrations of reactants makes the reaction happen at a faster rate. For a chemical reaction to occur, there must be a certain number of molecules with energies equal to or greater than the activation energy.

In case of a shortage in petroleum and natural gas, a company should find a way to make nylon without using natural resources.

Nylon is a very important material used in numerous applications. As a result of this, the demand for nylon as a raw material has genuinely been on the high side ever since.

However, nylon production depends on petroleum and natural gas. It is possible that there could be a shortage of these resources since they are obtained from the environment. In such cases, a company should  find a way to make nylon without using natural resources.

Learn more about polymers: https://brainly.com/question/17555341

Answer:

identify a different natural resource that nylon could be made from

Explanation:

I just did this question

The statement describing nucleic acid has been that nucleic acid provides the blueprint for the formation of proteins.

Nucleic acid has been the genomic material in the body that performs the function of storage of information. DNA and RNA are nucleic acids.

The proteins are the biomolecules that are composed of amino acid units bound by the polypeptide bond. The information for the correct sequence of binding of protein has resulted from the mRNA codes.

The correct sequence and folding results in the operational protein, that has been able to perform varying functions. The codes for the binding of protein have resulted from the blueprint consisting of nucleic acid.

Thus, nucleic acid performs the function of acting as a blueprint for the formation of proteins.

For more information about proteins, refer to the link:

https://brainly.com/question/2193769

Answer:

Green

Explanation:

Ammonia turns the cabbage juice into a blue/green color because it is a base, a material that tastes bitter and makes an acid neutral.

Answer:

green

Explanation:

I did the experiment

Answer:

(Physical or Chemical) properties of a substance can easily be observed. … (Physical or Chemical) properties can be used to identify substances. physical property. Oxygen is odorless and colorless.

Explanation:

Answer:

CoBr2,CoBr2·6H2O,CoBr2·2H2O

Explanation:

Answer:

A) HF (Hydrofluoric acid)

Explanation:

dw I gotchu. So first off there are three types of intermolecular forces of attraction: 1) London-Dispersion, 2) Dipole-Dipole, 3) Hydrogen-Bonding Attraction Forces. That is also ranked in increasing strength, with Hydrogen-Bonding Attraction Forces being the strongest. Every molecule has London-Dispersion forces present and all the diatomic molecules listed have dipole moments of a certain debye (or Coloumb-meter) value. Both are irrelevant here so dw about that. Lets look at the strongest attraction: the hydrogen-bonding one. Now, don't get confused bc all of these acids are bonded to H bc hydrogen-bonding attraction forces only occur when H is bonded to N, O, or F. So Process of Elimination, hydrofluoric acid (HF) has the strongest intermolecular forces of attraction.

Note: If you don't know what inter/intra molecular forces of attraction are, ill give u a quick summary. Intermolecular refers to electrostatic attractions between molecules while intramolecular refers to the actual bonds, single, double, or triple, binding the atoms together. Well there you have it, have a great day. :)

Answer: Certain physical constants (e.g., melting point, boiling point, density, refractivity, solubility) can be found in the literature for many compounds, whereas others (e.g., specific rotation) are characteristic of different groups of compounds and are known for almost all of them.

Explanation:

Some molecules in a substance have a high kinetic energy hence they are able to convert into vapor. These molecules exert pressure on the liquid surface.

We know that the molecules that compose matter are in constant random motion. The kinetic energy of all the molecules in the liquid are not the same. The molecules at the surface of the liquid posses more kinetic energy than the molecules below.

Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert  pressure on the substance.

Learn more: https://brainly.com/question/25273232

Answer:

Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert pressure on the substance.

Explanation:

Answer:

Electronegativity is defined as the tendency of an atom participating in a covalent bond to attract the bonding electrons

Explanation:

Electronegativity increases and you go up and to the right, making fluorine the most electronegative element.