which of the following acids will have the strongest conjugate base? A. hcn B. h2so4 C. hclo4 D. hi E. nacl

This substance may also be known as glycol. Each chemical's characteristics, potential physical, mental, and environmental health risks, as well as safety precautions, are all covered in the SDS.

Atoms of various elements are chemically mixed in compounds in a predetermined ratio. A pure chemical compound made of the same type of atom is referred to as an element. Composition. Different elements are found in compounds in a predetermined ratio, organized by chemical bonds in a predetermined way.

A substance that has been chemically linked by the joining of two or more distinct components. Saltwater (NaCl), which is derived from the components sodium and chloride, and water (H2O), which is created from the elements and oxygen, are two examples of compounds.

To know more about Compound visit:

https://brainly.com/question/19458442

#SPJ1

Using unit conversion, One hour of yoga can result in 285 kilocalories burned (kcal) 1192440 j of energy were burned.

It involves changing a value stated in one unit of measurement into an equivalent value expressed in a different unit of measurement that is of the same kind.

The same attribute is expressed using a unit conversion, but in a different unit of measurement. For instance, time can be expressed in minutes rather than hours, and distance can be expressed in kilometers, feet, or any other measurement unit instead of miles.

We must convert the units using the provided data in order to solve this challenge.

information regarding the issue:

energy is equal to 285 kcal (kcal)

Energy measured in joules (j) equals.

A calorie (kcal) is equal to 4184 joules (j)

Kilocalories (kcal) are converted to joules (j), which gives us:

1 kcal = 285 kcal * 4184 j of energy.

1192440 j = energy

To learn more about unit conversion from given link

https://brainly.com/question/28526373

#SPJ1

The amount of carbondioxide that will be produced if 1.3L is combusted is 3.9L (option B).

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, propane gets combusted in air to produce carbondioxide and water as follows:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

Based on the above equation, 1 mole of propane produces 3 moles of carbondioxide.

This suggests that 1.3L of propane will produce 3.9L of carbondioxide.

Learn more about stoichiometry at: https://brainly.com/question/29775083

#SPJ1

The molecule in question is C12H22O2. This can be determined by using the information provided about the number of carbon, hydrogen, and oxygen atoms present in the molecule.

The chemical formula for the molecule is determined by listing the elements present in the molecule and their respective number of atoms.

The chemical formula for this molecule is C12H22O2. Using this information, it is possible to determine that the molecule is composed of 12 carbon atoms, 22 hydrogen atoms, and 2 oxygen atoms. The molecule with this chemical formula is known as "dodecanoic acid" and it is a straight-chain carboxylic acid.

It is also known as Lauric acid, which is found in many natural fats and oils and is a common ingredient in soaps and cosmetics. It is a white, waxy solid with a faint, characteristic odor. It is used in the manufacture of a wide variety of products, such as soaps, lubricants, and surfactants.

Learn more about carboxylic acid here:

https://brainly.com/question/26855500

The complete question is:

What is the chemical formula and structure of the molecule that is composed of 12 carbon atoms, 22 hydrogen atoms, and 2 oxygen atoms?

#SPJ4

1.73/2 approximately 0.86 moles of acetic acid must be added. KOAc should be used at a ratio of 3/2, or 1.5 moles.

Effects on People Acetic acid is a potent irritant to the skin, upper respiratory tract, eyes, and mucous membranes when inhaled as vapor. Sodium acetate mixtures of 80% or over can be corrosive when in contact with skin or eyes, severely burning any exposed tissue.

Using the Henderson-Hasselbalch equation, determine the quantity of acetic acid (x) required to produce a pH-5.0 solution that contains

3MK+(3 M KOAc). The pK of acetic acid is 4.76 (Table 2-4).

[tex]$$\begin{aligned}\mathrm{pH} & =\mathrm{p} K+\log \frac{[\mathrm{KOAc}]}{[\mathrm{HOAc}]} \\5 & =4.76+\log \frac{3}{x} \\0.24 & =\log 3-\log x \\0.24-0.48 & =-\log x \\0.24 & =\log x \\x & =1.73 \mathrm{M}\end{aligned}$$[/tex]

Therefore, for a 500 mL solution, the amount of acetic acid added should be 1.73/2 or 0.86 moles. The amount of KOAc should be 3/2 or 1.5 moles.

To know more about acetic acid visit:

https://brainly.com/question/15202177

#SPJ4

The partial pressure of NH3(g) at equilibrium is 0.122 atm.

To calculate the partial pressure of NH3(g) at equilibrium, we can use the equilibrium constant expression (Kp = [H2S][NH3]/[NH4HS]). We know that Kp = 0.11 at 250°C and that the initial amount of NH4HS is 59.4 g. Since we also know the volume of the container is 5.0 L, we can use the ideal gas law (PV = nRT) to convert the number of moles of NH4HS to pressure.

First, we need to convert the mass of NH4HS to moles:

n = m/M = (59.4 g) / (51.11 g/mol) = 1.162 moles

Next, we can use the ideal gas law to find the pressure of NH4HS at the start of the reaction:

P = (nRT) / V = (1.162 mol)(0.0821 atm·L/mol·K)(523 K) / (5.0 L) = 9.98 atm

At equilibrium, the sum of the partial pressures of H2S and NH3 must equal 9.98 atm. Therefore, we can use the equilibrium constant expression to find the partial pressure of NH3:

Kp = [H2S][NH3]/[NH4HS] = 0.11

[NH4HS] = [H2S][NH3] / Kp = (P_H2S)(P_NH3) / 0.11

We know that P_NH4HS = 9.98 atm, so we can solve for P_NH3:

P_NH3 = [NH4HS] * Kp / [H2S] = 9.98 atm * 0.11 / P_H2S

Since we know that the sum of the partial pressures of H2S and NH3 must equal 9.98 atm, we can substitute that in for P_H2S:

P_NH3 = 9.98 atm * 0.11 / (9.98 atm - P_NH3)

Solving for P_NH3, we get P_NH3 = 0.122 atm

Read more about Chemical equilibrium:

https://brainly.com/question/16878977

#SPJ4

The ionic compound that occurs between each pair of elements has the following formula:

The formula of the ionic compound of each pair is:

(a)Aluminum and Sulfur:

Aluminum sulfide, commonly known as [tex]Al_{2} S_3}[/tex], is created when aluminum and sulfur are combined. Its molar mass is 150.158 g/mol. Al has an oxidation state of +3, while the sulfur in [tex]Al_{2} S_{3}[/tex]is in a -2 oxidation state.

[tex]Al_2} S_{3}[/tex] = [tex]Al^{+3}[/tex] + [tex]S^{-2}[/tex]

(b) Aluminum and Nitrogen:

Solid aluminum nitride is known as aluminum nitride (AlN). It's an electrical insulator with a high thermal conductivity of up to 321 W/. (mK).

AlN = [tex]Al^{+3}[/tex] + [tex]N^{+3}[/tex]

(c) Potassium and oxygen

When potassium and oxygen combine, a substance known as potassium oxide is created. The chemical name for it is [tex]K_{2} O[/tex]. Due to its high level of reactivity, potassium is never found in its free form. It is straightforward for it to react with oxygen atoms to produce [tex]K_{2} O[/tex]because of its +1 valency.

( K₂ )⁺¹ + O²⁻ → K₂O

To know more about ionic on

https://brainly.com/question/28560368

#SPJ4

The complete question follows

Write a formula for the ionic compound that forms between each pair of elements.

The volume of a sample of ammonia at 0°C and 1.00 atm is approximately 0.232 L.

How to find the volume of a sample of ammonia (NH3)?

The relationship between the volume and temperature of a gas is described by Charles's law, which states that the volume of a gas is proportional to its temperature, provided that the pressure and number of moles of the gas remain constant.

Mathematically, this can be expressed as:

V1 / T1 = V2 / T2

Where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.

Given:

Initial volume = 0.25 L

Initial temperature = 27°C = 27 + 273.15 = 300 K

Initial pressure = 0.850 atm

Final temperature = 0°C = 273.15 K

Final pressure = 1.00 atm

To convert from one pressure to another, we can use the ideal gas law:

P1V1 = P2V2

Where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

Rearranging, we can find the final volume:

V2 = P1V1 / P2

V2 = (0.850 atm) * (0.25 L) / (1.00 atm)

V2 = 0.213 L

Finally, using Charles's law, we can find the volume of the sample at 0°C and 1.00 atm:

V2 / T2 = V1 / T1

V2 / 273.15 = V1 / 300

V1 = (V2 * 300) / 273.15

V1 = (0.213 L) * (300 K) / (273.15 K)

V1 = 0.232 L

So, the volume of a sample of ammonia at 0°C and 1.00 atm is approximately 0.232 L.

Learn more about  Charles's law here: brainly.com/question/16927784

#SPJ1

The mass of H₂O produced when 40000 g of C₂H₂ burns completely is 27692.3 g.

The mass of water produced when 40000 g of C₂H₂ burns completely in the air is determined from the mole ratio as given in the equation of the reaction as follows;

Equation of reaction: 2 C₂H₂(g) + 5 O₂(g) → 4 CO₂(g) + 2 H₂O(g)

The molar mass of C₂H₂ = 26 g

The molar mass of water = 18 g

The mole ratio of C₂H₂ to H₂O is 1 : 1

The mass of water produced = 40000/26 * 18 g

The mass of water produced = 27692.3 g

Learn more about mole ratio at: https://brainly.com/question/26023

#SPJ1

The formula KCL is not the correct formula for the compound potassium chloride. Potassium chloride is a compound made up of potassium and chlorine ions, and its chemical formula is KCl.

Answer:

First layer of the atmosphere = Troposphere

Layer that contains the Ozone Layer = Stratosphere

The layer of the atmosphere that has the least molecules atmosphere that has the least molecules = Exosphere

Explanation:

The enthalpy for the reaction, N[tex]_2[/tex](g) + 1/2 O[tex]_2[/tex](g) →N[tex]_2[/tex]O(g) is +81.5. among all the given options, the correct option is option A.

The amount of heat inside a system is measured as enthalpy. This heat is used to cause a process to occur. Enthalpy is indeed a thermodynamic quantity since every system that involves heat is referred to be a thermodynamic system.

Additionally, it is important to remember that each system has a number of players. These individuals each have their own pressure and volume. We already know that the ratio of a system's pressure to its volume is constant.

N[tex]_2[/tex](g) + 1/2 O[tex]_2[/tex](g) →N[tex]_2[/tex]O(g)

i)2 NH[tex]_3[/tex](g) + 3 N[tex]_2[/tex]O(g) → 4N[tex]_2[/tex](g) + 3 H[tex]_2[/tex]O(l) ∆H°/kJ= -1010 KJ

ii)4 NH[tex]_3[/tex](g) + 3 O[tex]_2[/tex](g)  → 2 N[tex]_2[/tex](g) + 6 H[tex]_2[/tex]O(l) ∆H°/kJ = -1531 KJ

Multiply second equation with 4 and first equation with 2. Now substract third equation from fourth equation.

N[tex]_2[/tex](g) + 1/2 O[tex]_2[/tex](g) →N[tex]_2[/tex]O(g)  ΔH=+81.5

Therefore, the enthalpy for the reaction, N[tex]_2[/tex](g) + 1/2 O[tex]_2[/tex](g) →N[tex]_2[/tex]O(g) is +81.5.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ1

Based on the pie chart, Local governments work with farmers to implement strategies to minimize nitrogen runoff from farm fields would likely yield the biggest benefits for reducing nitrogen inputs into the chesapeake bay.

In order to control the transport of nitrogen from source regions to surface waters, managing agriculture and other human activities on the landscape usually entails reducing nitrogen applications and/or making changes to improve the efficiency of natural elimination of nitrogen. The transfer of nitrogen in particle form from the land surface to surface waters may be restricted by management techniques intended to reduce runoff and soil losses, such as riparian buffers, contour tillage, or manure or fertiliser injection.

The efficiency of management strategies for lowering nitrogen transfer from the land surface to surface waters is constrained by a number of factors and mechanisms. In anoxic riparian areas, nitrate may be converted to nitrogen gas, although it frequently moves past riparian areas to reach locations where streams discharge . Nitrogen losses may be significant where a thin surficial aquifer restricts groundwater to shallow flow paths, but minimal where a thicker surficial aquifer permits deeper groundwater flow. Variable hydrogeologic conditions on the Eastern Shore contribute to variable nutrient retention in riparian buffers.

Learn more about chesapeake bay here :

brainly.com/question/3115986

#SPJ4

Based on the pie chart, which of the following approaches would likely yield the biggest benefits for reducing nitrogen inputs into the Chesapeake Bay?

Answer:

0.9997 atm.

Explanation:

To convert pressure from millimeters of mercury (mm Hg) to atmospheres (atm), you can use the conversion factor 1 atm = 760 mm Hg.

To convert 758.7 mm Hg to atm, you can divide the pressure in mm Hg by 760:

758.7 mm Hg / 760 mm Hg/atm = 0.9997 atm

So the pressure in atm is approximately 0.9997 atm.

According to the unit conversion of pressure, the pressure in atmospheres is 0.998 atmospheres.

Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.

There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .

It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.

As 1 atmosphere= 760 mm Hg , thus, 758.7 ×1/760=0.998 atmospheres.

Thus, the pressure in atmospheres is 0.998 atmospheres.

Learn more about pressure,here:

https://brainly.com/question/18431008

#SPJ2

Answer:

KI + Pb(NO3)2 -> PbI2 + KNO3

Explanation:

The balanced chemical equation for the reaction of potassium iodide with lead(II) nitrate to form lead(II) iodide and potassium nitrate is:

KI + Pb(NO3)2 -> PbI2 + KNO3

In this equation, the coefficients in front of the compounds indicate the number of moles of each substance that are needed to balance the equation. This means that there are equal numbers of atoms of each element on both sides of the equation.

The correct statements that reflect the relationship between the volume and the external pressure of the gas at the constant temperature is a)  As pressure decreases, volume will increase. b) Pressure and volume are inversely proportional.

The ideal gas equation is given as :

P V = n R T

where,

P = pressure

V = volume

n = number of moles

R = gas constant

T = temperature

As the pressure will decreases, the volume will increase and the Pressure and the volume are inversely proportional to each other. The number of mole is the ratio between the mass divided by the molar mass.

To learn more about ideal gas here

https://brainly.com/question/28257995

#SPJ4

Caroline knows the amount of a compound in moles.To find the number of molecules in the given sample of her compound, b. Avogadro's number also must be used in her calculation.

Avogadro's constant or “Avogadro's number” (symbol: L, NA) is the number of constituent particles (usually atoms or molecules) found in the amount of substance in one mole. Therefore, Avogadro's number is a proportional factor relating the molar mass of a substance to the mass of the sample. This value is equal to 6.022 140 857 (62) × 1023 mol−1.

Previous definitions of chemical quantities involved Avogadro's number, a historical term closely related to Avogadro's constant but defined differently: it was originally defined by Jean Baptiste Perrin as the number of atoms in one mole of hydrogen. It was later redefined as the number of atoms in 12 grams of the carbon-12 isotope and then generalized to relate the number of substances to their molecular weight.

Learn more about Avogadro's number at https://brainly.com/question/11907018.

#SPJ4

The characteristics of the two substances :

Substance A:

It has a higher boiling point.

It has  higher heat of vaporization

Substance B:

It has the weaker intermolecular forces.

It is a gas at 300 mmHg

1) The substance A has the vapor pressure of 275 mmHg . It has low vapor when compared to the substance B . It has the higher boiling point and has the higher heat of vaporization.

2) The substance B has the vapor pressure of the 459 mmHg and it has the weaker intermolecular forces when compared to the substance A and also it is a gas at 300 mmHg.    

To learn more about vapor pressure here

https://brainly.com/question/14440809

#SPJ4

Each carbocation is capable of rearranging to a more stable carbocation. Limiting yourself to a single 1,2-shift, suggest a structure for the rearranged

What is carbocation?

To learn more about  structure refers to:

https://brainly.com/question/24777008

#SPJ4

The correct procedure for handling microorganisms is to wash your hands frequently to make preventive doings. For the safest reason, using Personal Protective Equipment is recommended.

What is Personal Protective Equipment?

Personal Protective Equipment (PPE) is equipment that must be used when working, according to the potential hazards and work risks on the job. This is used to maintain the safety of the workers themselves and those around them. Personal Protective Equipment must be in accordance with the type of work so that the safety and health of workers can be guaranteed.

Activities in the microbiology laboratory will always be closely related to the following things

The tool used in assisting the examination or identification of microorganisms can be in the form of a Bunsen which uses spirit, which has flammable properties. If the test tube is not used carefully, it can break and can injure the limbs.

Learn more about Personal Protective Equipment at: https://brainly.com/question/28178938

#SPJ1

Answer:

Use aseptic techniques, Wash your hands frequently, and use disinfectants to clean lab surfaces.

Explanation:

Answer:

The answer is A. Carbonyl.

Carbonyl functional group is found in an aldehyde. Therefore, option (A) is correct.

A functional group with the formula C=O that is composed of a carbon atom double-bonded to an oxygen atom and is divalent at the C atom is known as a carbonyl group in organic chemistry.

The function of the carbonyl group is to break up the bonds in the carbon chain. The electronegative oxygen molecule will in general draw in additional electrons than the carbon it is attached to inside the carbonyl gathering.

There are many aromatic carbonyl compounds. Substances which incorporate carbonyls incorporate the compound answerable for the smell of vanilla and cinnamon.

Learn more about carbonyl groups:

https://brainly.com/question/13564853

#SPJ5

The compounds is the mass ratio of the chromium to the oxygen closest to 1.62 to 1.00 is CrO₃.

The Atomic mass of Cr = 52 g /mol

The Atomic mass of O  = 16 g/mol

The mass ratio of the chromium to the oxygen is given below as :

1) CrO₃ = 52 / 16 × 3 = 1.08

2) CrO₂ = 52 / 16 ×2 = 1.63

3) CrO = 52 / 16 = 3.25

4) Cr₂O = 52 × 2 / 16  = 6.5

5) Cr₂O₃ = 52 × 2 / 16 × 3 =  2.1

Thus the compound correct  mass ratio of chromium to oxygen closest to 1.62 to 1.00 is CrO₃.

To learn more about mass ratio here

https://brainly.com/question/14403176

#SPJ4

The order these metals should have in the activity series (from top to bottom) is z,x,y.

An activity series is a list of elements in order of decreasing reactivity. Elements at the top of the activity series are more reactive than those at the bottom. Since metal x can replace the ions of metal y from solution but not those of metal z, it means that metal x is more reactive than metal y but less reactive than metal z. Therefore, the order of these metals in the activity series would be z (most  reactive), y (least reactive), x (more reactive).

Learn more about ions here:

https://brainly.com/question/29183072

#SPJ4

The step that determines rate is the one that moves most slowly in a series of non-elementary reactions.

Reaction of CO(g) with NO2(g)

CO(g) + NO2(g) ? NO(g) + CO2(g)

At low temperatures, the experimentally determined rate law expression is:

Rate = k [NO2]2

A two step reaction mechanism is suggested

Step 1 SLOW NO2(g) + NO2(g) ? NO3(g) + NO(g)

Step 2 FAST CO(g) + NO3(g) ? CO2(g) + NO2(g)

CO(g) + NO2(g) ? NO(g) + CO2(g)

The step that determines rate is the one that moves most slowly in a series of non-elementary reactions. The rate-determining step is the initial reaction since it happens slowly. We can get the rate law from this.

Additionally, because the specie is not present in the overall reaction equation, it can only be an intermediate that was created in step 1 and depleted in step 2.

Learn more about rate-determining step :

brainly.com/question/27908759

#SPJ4

Answer:

Both chemical and nuclear reactions involve changes in the arrangement of atoms or subatomic particles.

Both chemical and nuclear reactions result in the release or absorption of energy.

Chemical and nuclear reactions are both types of reactions that involve a change in the composition of matter. Here are two things that they have in common/share:

1. Conservation of mass: Both chemical and nuclear reactions follow the law of conservation of mass. This means that the total mass of the reactants is equal to the total mass of the products. In other words, mass cannot be created or destroyed during a chemical or nuclear reaction.

2. Energy changes: Both chemical and nuclear reactions involve a release or absorption of energy. Chemical reactions typically involve the breaking and forming of chemical bonds, which releases or absorbs energy. Nuclear reactions involve the splitting or combining of atomic nuclei, which releases or absorbs much larger amounts of energy. In both cases, the energy change can be measured and analyzed.

Hope this helps <3

Please give me Brainliest :)

The correct answer is a) share electrons with other atoms.

Covalent bond formation occurs when atoms share electrons in order to achieve a stable electron configuration, also known as a full outermost electron shell. This is known as a covalent bond. In this type of bond, atoms share electrons in order to achieve a stable electron configuration. This is different from ionic bond formation, where atoms transfer electrons to each other in order to achieve a full outermost electron shell. Atoms collaborate with other atoms to form stable electron configurations in covalent bonds. In covalent bond, atoms share electrons with other atoms in order to achieve a stable electron configuration.

To learn more about covalent bond:

https://brainly.com/question/12732708

#SPJ4

The mass percentage of the nitrogen is 24.34 % and the mass percentage of phosphorus is 26.95 %.

The formula for the ammonium dihydrogen phosphorus is NH₆PO₄.

The molar mass of ammonium dihydrogen phosphate = 115 g/mol

The molar mass of nitrogen = 28 g/mol

The molar mass of phosphorus = 31 g/mol

The mass percentage of nitrogen  = (1 × 28 / 115 ) × 100 %

                                                         = 24.34 %

The mass percentage of phosphorus = ( 1 × 31 / 115 ) × 100 %

                                                               = 26.95 %

Thus, the mas percentage of nitrogen is 24.34 % and phosphorus is 26.95 %.

To learn more about mass percentage here

https://brainly.com/question/13065194

#SPJ4

When a solution of NaCl (aq) and a solution of AgNO₃ (aq) are mixed, the net ionic equation is Na⁺ (aq) + Cl⁻ (aq) AgCl(s), and an AgCl precipitate is formed.

The net ionic equation is a chemical equation for a reaction that only lists the species involved.

In other words, an ionic equation is a chemical equation in which dissociated ions represent electrolytes in aqueous solution. Typically, this is a salt dissolved in water, with the ionic species indicated in the equation by (aq) to indicate that they are in aqueous solution.

The balanced equation will be as follows:

NaCl (aq) + AgNO₃ (aq) + AgNO₃ (aq) + AgCl(s)

Where (aq) stands for aqueous and (s) stands for solid.

In a separated aqueous solution, the total ionic equation will be:

Na⁺ (aq) + Cl⁻(aq) + Ag⁺ (aq) + NO3(aq) Ag⁺ + NO₃⁻(aq) + AgCl(s)

The spectator ions in this case are Ag⁺ and NO3 because they appear unchanged in both the product and the reagent. By writing the net ionic equation for these ions:

AgCl + Na⁺ (aq) + Cl(aq) (s)

AgCl will precipitate because it is an insoluble salt.

Finally, the net ionic equation is Na⁺(aq) + Cl⁻(aq) AgCl(s), and an AgCl precipitate is formed when a solution of NaCl(aq) is mixed with a solution of AgNO₃(aq).

Learn more about net iconic equation here: https://brainly.com/question/19705645

#SPJ4

Answer:

Explanation:

Polar covalent bonds and nonpolar covalent bonds are similar in that they both involve the sharing of electrons between atoms in a covalent bond. In both types of bonds, the atoms involved share electrons in order to achieve a full valence electron shell, which gives the bond its stability.

Both polar and nonpolar covalent bonds have a covalent character, meaning they are formed by the sharing of electrons between atoms, as opposed to the transfer of electrons which is seen in ionic bonds. Also, both type of bonds are strong chemical bonds, which means they have a high bond energy, meaning they require a lot of energy to break.

The equation, in its most basic form, asserts that energy and mass (matter) are interchangeable; they are various manifestations of the same thing. Both energy and mass can become one another under the correct circumstances.

The complete question is,

"Mass times light speed squared equals energy."

To learn more about energy refer to:

https://brainly.com/question/13881533

#SPJ1