Answer:
Fecal coliform increases the amount of organic substances in water and lowers the amount of dissolved oxygen, killing fish.
Explanation:
Fecal coliform are species of bacteria that are found in the intestine of warm-blooded animals like humans etc. Hence, they are released whenever they excrete feaces. Due to this reason, the presence of fecal coliform bacteria in a water body indicates fecal discharge into that water.
The presence of excessive fecal coliform in a water body increases the amount of organic substances in the water. These organic substances are decomposed by bacteria, which causes the oxygen present in the water body (dissolved oxygen) to deplete/decrease. The depletion of oxygen in the water threatens aerobic aquatic organisms e.g fishes and they ultimately suffocate and die.
which of the following shows how rate depends on concentrations of reactants?
Answer:
option c
Explanation:
Rate = k(A)¹(B)²
Answer:
c
Explanation:
a p e xxxxxxxxx
Calculate the number of g of KCN that will react with 1.06 mol of HCl.
Answer:
68.9 g of KCN.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
KCN + HCl → KCl + HCN
From the balanced equation above,
1 mole of KCN reacted with 1 mole of HCl.
Next, determination of the number of mole of KCN needed to react with 1.06 moles HCl.
This is illustrated below:
From the balanced equation above,
1 mole of KCN reacted with 1 mole of HCl.
Therefore, 1.06 moles of KCN will also react with 1.06 moles of HCl.
Finally, we shall convert 1.06 moles of KCN to grams.
This can be obtained as follow:
Molar mass of KCN = 39 + 12 + 14 = 65 g/mol.
Mole of KCN = 1.06 moles
Mass of KCN =...?
Mole = mass /Molar mass
1.06 = mass of KCN / 65
Cross multiply
Mass of KCN = 1.06 x 65
Mass of KCN = 68.9 g
Therefore, 68.9 g of KCN is needed to react with 1.06 moles of HCl.
For the reaction 2HNO3 + Mg(OH)2 + Mg(NO3)2 + 2H20, how many grams of magnesium
nitrate are produced from 17.37 mol of nitric acid, HNO3?
Select one:
O a. 1290
Ob. 859
O c. 5160
Od. 1080
Answer:
mass = (a) 1290
Explanation:
as 2 moles of nitric acid gives one mole of of magnesium nitrate . we should divide the number of moles of of nitric acid by 2 .
Then apply the formula:
number of moles= mass/molar ratio
thanks
Which is the proper order for using a fire extinguisher? pull, aim, squeeze, sweep sweep, squeeze, aim, pull aim, pull, sweep, squeeze pull, sweep, aim, squeeze
Answer:
P.A.S.S
pull, aim, squeeze, sweep.
hope this answer correct (^^)..
Answer:
The proper way of using an extinguisher is:
pull, aim, squeeze and sweep.
Explanation:
P-pull
A-aim
S-squeeze
S-sweep
You can always use this to remember, okay.
Hope it helps.
What is DNA? A. A Carbohydrate B. A protein C. A nucleic acid D. A lipid
Answer:
C: a nucleic acid
Explanation:
The function of nucleic acids is to store and express genetic information. Since fragments of DNA called genes encode the information to produce certain proteins, they are classified as nucleic acids.
If you want further tutoring help in biology or other subjects for FREE, check out growthinyouth.org.
Convert the pressure 525.4 torr to kPa.
Select one:
O a. 70.0
Ob. 3940
O c. 9.90
Od. 525
Answer:
Option A. 70.0 KPa.
Explanation:
Data obtained from the question include:
Pressure (torr) = 525.4 torr
Pressure (kPa) =?
The pressure expressed in torr can be converted kPa as shown below:
760 torr = 101.325 KPa
Therefore,
525.4 torr = (525.4 x 101.325) / 760 = 70.0 KPa.
Therefore, 525.4 torr is equivalent to 70.0 KPa.
Which of these is an example of how engineers have contributed to society?
A. Our current understanding of viruses
B. The theoretical mathematics describing the orbits of planets
around the sun
C. The seven-mile bridge that spans across the Gulf of Mexico to
connect two cities of the Florida Keys
D. Nomadic tribes traveling in search of food to hunt and gather
A compound containing oxygen and group 16 and/or group 17 elements contains one of the following elements. The compound dissolves in water. Which element does
the compound contain?
A. Magnesium
B. Potassium
C. Barium
D. Strontium
Explanation:
pottassium its one of covalent bond
what is the the chemical name for hydroden and oxygen
Answer:
hydrogen peroxide is a chemical name for hydrogen and oxygen
which of the following is a characteristic of a weak acid? A. It does not conduct electricity in water B. It is not as dangerous as a strong acid C. It is less concentrated than a strong acid D. It does not dissociate completely in water
Answer:
A B C D (all of the above)
Explanation:
Weak acid do not have a much hydrogen ions when in liquids or aqueous solutions. Examples of weak acids include vinegar, citric acid (from oranges, lemons, etc)
crossover formula of potassium oxide.
Answer:
K2O
Explanation:
It carries the chemical formula K2O. Potassium cannot be found free because it is too reactive. It has valency +1 and combines readily with oxygen atoms forming K2O.
hope it helps
Based on the electron configuration of the two
atoms, predict the ratio of metal cationic (+) atom
to nonmetal anionic (-) atom in the compound.
Lithium 1s²2s1
Nitrogen 1s22s22p3
Answer:
3:1
Explanation:
Lithium is a group 1 element. This means it would donate one electron to form the cation.
Nitrogen on the other hand is a group 5 element. It would accept 3 electrons to form the anion.
This means there has to be three lithium atoms, each donating an electron each to the nitrogen atom for a compound to be formed.
The formular for the ionic compound would be given as;
Li₃N
Hence the ration is 3:1
Which energy profile best shows that the enthalpy of formation of CS2 is 89.4 KJ/mol?
Answer:
Option C. Energy Profile D
Explanation:
Data obtained from the question include:
Enthalpy change ΔH = 89.4 KJ/mol.
Enthalpy change (ΔH) is simply defined as the difference between the heat of product (Hp) and the heat of reactant (Hr). Mathematically, it is expressed as:
Enthalpy change (ΔH) = Heat of product (Hp) – Heat of reactant (Hr)
ΔH = Hp – Hr
Note: If the enthalpy change (ΔH) is positive, it means that the product has a higher heat content than the reactant.
If the enthalpy change (ΔH) is negative, it means that the reactant has a higher heat content than the product.
Now, considering the question given, the enthalpy change (ΔH) is 89.4 KJ/mol and it is a positive number indicating that the heat content of the product is higher than the heat content of the reactant.
Therefore, Energy Profile D satisfy the enthalpy change (ΔH) for the formation of CS2 as it indicates that the heat content of product is higher than the heat content of the reactant.
Why is warm honey easier to pour than cold honey?
A) Increasing the temperature breaks the molecules down into atoms, which are smaller.
B) Increasing the temperature increases the kinetic energy of the molecules, which makes it easier to overcome the attractive forces between molecules.
C) Increasing the temperature converts the sugars into water, which flows easier.
D) Increasing the temperature makes the honey more viscous.
Explanation:
Warm honey is easier to pour because the molecules or what we call as atoms are tightly packed in solids and when solids convert into liquid they flow easily.I HOPE YOU MIGHT FIND THIS VERY HELPFULLWITH LOVE FAULTYDEVILLOVE YA......warm honey easier to pour than cold honey due to Increasing the temperature converts the sugars into water, which flows easier.
What are the components of honey ?
Honey contains sugar, water and other ingredients, where Sugar gives gives sweetness, water maintain fluidity, and other components are present in a least amount and the differences are the color, aroma and taste.
Three types of sugar such as fructose (41%), grape sugar or glucose about 34% and sucrose contain 1 and 2%, other components include minerals, proteins, acids and undetermined matter.
Minerals constitute 3.68%, increase the value of honey for human consumption and the most common minerals are potassium, chlorine, sulfur, calcium, sodium, phosphorus, magnesium, silicon, iron, manganese and copper.
Proteins are collected from nectar and pollen which is the integral parts of plants, acids are also the component, vitamn C and some B complex vitamins such as riboflavin, pantothenic acid, pyridoxine, biotin, nicotinic acid are present.
For more details regarding honey, visit
https://brainly.com/question/440048
#SPJ2
Which statement best describes how energy is important to chemistry?
A. Energy is stored in an atom's electrons.
B. Energy is not conserved during chemical reactions,
C. Energy is absorbed and released during chemical reactions,
D. Energy holds atoms and bonds together,
Answer:
C. Energy is absorbed and released during chemical reactions,
Explanation:
All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy.
A gaseous substance turns directly into a solid. Which term describes this change?
O deposition
O evaporation
O melting
O sublimation
Answer:
deposition
Explanation:
Sublmation- solid transforming into a gas, skipping the liquid stage.
eveporation- a liquid transformimg into a gas
melting- a solid transforming into a liquid
deposition- the opposite of sublimation (your anwser)
A gaseous substance turns directly into a solid. The term which is indicative of this change is deposition.
Evaporation is a process in which a liquid which when exposed to heat boils and converted into vapors of water. For example, the water is converted into water vapors. Melting is a process in which the solid substance when exposed to heat melts . In this a solid is converted into liquid. For example, a solid ice is melted into liquid. Sublimation is a process in which a solid is converted into a vapor state without being converted into a liquid. For example, dry ice in which the solid dry ice is converted into vapors in presence of air. Deposition is the process in which gaseous molecules aggregate and combine to form a solid. It is opposite of sublimation process. For example, conversion of water vapors to ice.Hence, deposition is the correct option.
Learn more about sublimation:
https://brainly.com/question/13773373
Help PLZ!!! Which statement accurately represents the arrangement of electrons in Bohr’s atomic model? -Electrons move around the nucleus in fixed orbits of equal levels of energy. -Electrons move around the nucleus in fixed orbits of increasing levels of energy. -Electrons move randomly in the relatively large space surrounding the nucleus. -Electrons vibrate in fixed locations around the nucleus.
Answer:
electrons move around the nucleus in fixed orbits of equal amounts of energy
Explanation:
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. The correct option is option B.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.
According to Bohr’s atomic model, electrons move around the nucleus in fixed orbits of increasing levels of energy.
Therefore, the correct option is option B that is electrons move around the nucleus in fixed orbits of increasing levels of energy.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ5
Tartaric acid, C4H6O6, has the first ionization constant with the value: Ka1 = 9.20 × 10-4. Calculate the value of pKb for the conjugate base of tartaric acid. 10.963 3.036 1.087 x 10-11 9.20 x 10-4
Answer:
pKb = 10.96
Explanation:
Tartaric acid is a dyprotic acid. It reacts to water like this:
H₂Tart + H₂O ⇄ H₃O⁺ + HTart⁻ Ka1
HTart⁻ + H₂O ⇄ H₃O⁺ + Tart⁻² Ka2
When we anaylse the base, we have
Tart⁻² + H₂O ⇄ OH⁻ + HTart⁻ Kb1
HTart⁻ + H₂O ⇄ OH⁻ + H₂Tart Kb2
Remember that Ka1 . Kb2 = Kw, plus pKa1 + pKb2 = 14
Kb2 = Kw / Ka1 → 1×10⁻¹⁴ / 9.20×10⁻⁴ = 1.08×10⁻¹¹
so pKb = - log Kb2 → - log 1.08×10⁻¹¹ = 10.96
Read the two passages. Silicon is an element that is directly below carbon on the periodic table. Silicon can form bonds similar to carbon. Silicon-silicon single bonds require 222 kJ/mol of energy to break. Based on the statements, how much energy would it take to break a carbon-carbon single bond?
Answer:
100kj/mol
Explanation:
Question 22
3 pts
To what volume will a 2.33 L sample of gas expand if it is heated from 10.0°C to 100.0°C?
0.233L
4.41L
23.3 L
3.76 L
3.07 L
Answer:
3.07L
Explanation:
Charles law, which describes the direct relationship of the absolute temperature to its volume when the pressure is kept constant will be used in this case. The Charles' law equation is:
V1/T1 = V2/T2
Where; V1 is the volume of the gas at an initial state= 2.33L
V2 is the volume of the gas at a final state= ?
T1 is the absolute temperature of the gas at an initial state= 10°C
T2 is the absolute temperature of the gas at a final state= 100°C
The temperature in degree Centigrade (°C) must be converted to the absolute temperature unit (Kelvin) using:
T(K) = T(°C) + 273.15
T1 = 10°C + 273.15 = 283.15K
T2 = 100°C + 273.15 = 373.15K
To solve for V2 in the above Charles law equation, we make V2 the subject of the formula by saying:
V2 = V1 × T2 / T1
V2 = 2.33 × 373.15 / 283.15
V2 = 869.4395/ 283.15
V2 = 3.0705
Hence, the gas will be expanded to a volume of 3.07L when heated from 10.0°C to 100.0°C.
Describe one way in which each of the items you listed in Part 1 could be at least temporarily disrupted from equilibrium. Can you think of a way your body could respond to restore homeostasis after one of these disruptions? (3 points) Think about things that stress the body or do not supply the body's needs properly.
Answer:
Not enough exercise, not enough water, not a healthy diet. Consume fluids regularly during exercise, and drink 16 ounces of fluid for every pound lost during your workout.
Explanation:
What is the percent yield of lithium hydroxide from a reaction of 7.40g of lithium with 10.2g of water? The actual yield was measured to be 12.1g.
Answer:
[tex]\boxed{Percentage \ Yield = 47.6 \ percent}[/tex]
Explanation:
The balanced chemical reaction is
[tex]2Li + 2H_{2}O \ \ \ -> \ \ \ 2LiOH + H_{2}[/tex]
For the balanced reaction, we've
Lithium = 14 g
Water = 36 g
LiOH = 48 g
Hydrogen gas = 2 g
So,
14 g of lithium = 48 g of lithium hydroxide
And we have:
7.40 g of lithium = x grams of lithium hydroxide
Cross Multiplying,
x grams = [tex]\frac{48*7.4}{14}[/tex]
Grams of lithium = 25.4 g of lithium hydroxide
So, Theoretical Yield = 25.4 g of lithium hydroxide
Now, The %age yield:
%age Yield = [tex]\frac{Actual \ Yield}{Theoretical \ Yeild } * 100[/tex]
%age Yield = [tex]\frac{12.1}{25.4} * 100[/tex]
%age Yield = 47.6%
The diagrams show the partides of a substance
Which statement best describes the process that the diagrams show?
O A solid loses fonetic energy to become a loud and then becomes a gas
O A solid sains kinetic energy to become a loud and then becomes a gas
O Asas loses tonerc energy to become a loud and then becomes a solid
O A gas as kinetic energy to become a loud and then becomes a solid
Answer:
B. A solid gains kinetic energy to become a liquid and then becomes a gas.