Which of the following choices describes the function?
an exponential function that is decreasing.
a quadratic function that is increasing then decreasing.
a quadratic function that is decreasing then increasing.
None of these choices are correct.

The statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

The expression 100 - 0.4m represents the amount of medicine in Evan's bloodstream after m minutes, where the amount of medicine decreases by 0.4 milligrams each minute.

The coefficient of the variable m (-0.4) represents the rate of change of the amount of medicine in Evan's bloodstream per minute. It tells us that for every one minute that passes, the amount of medicine in his bloodstream decreases by 0.4 milligrams.

The constant term (100) represents the initial amount of medicine in Evan's bloodstream before the medicine starts to decrease.

Therefore, the statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

It will take John approximately 17 months to pay off the balance.

What is simple interest?

Simple Interest (S.I.) is the method of calculating the interest amount for a particular principal amount of money at some rate of interest.

Assuming that John does not use the credit card for any other purchases and that the credit card company uses a simple interest calculation method, we can use the following steps to calculate the number of months it will take John to pay off the balance:

Calculate the monthly interest rate by dividing the annual percentage rate (APR) by 12:

Monthly interest rate = 19% / 12 = 0.01583

Calculate the monthly finance charge by multiplying the outstanding balance by the monthly interest rate:

Monthly finance charge = $2000 x 0.01583 = $31.66

Subtract the monthly payment from the monthly finance charge to get the amount that will be applied to the outstanding balance:

Payment applied to balance = $150 - $31.66 = $118.34

Divide the outstanding balance by the payment applied to balance to get the number of months it will take to pay off the balance:

Number of months to pay off balance = $2000 / $118.34 = 16.9

(rounded up to the nearest whole number)

Therefore, it will take John approximately 17 months to pay off the balance.

To learn more about the simple interest visit:

brainly.com/question/20690803

#SPJ1

The perimeter and the area of the regular polygon are 20 inches and 27.53 square inches.

The figure representing a regular polygon with five sides of same length, whose perimeter and area is well described by following formulas:

Perimeter

p = n · l

Area

A = (n · l · a) / 2

Where:

Where the apothema is:

a = 0.5 · l / tan (180° / n)

If we know that l = 4 in and n = 5, then the perimeter and the area of the polygon are:

Perimeter

p = 5 · (4 in)

p = 20 in

Area

a = 0.5 · (4 in) / tan (180° / 5)

a = 0.5 · (4 in) / tan 36°

a = 2.753 in

A = [5 · (4 in) · (2.753 in)] / 2

A = 27.53 in²

To learn more on area of regular polygons: https://brainly.com/question/12291395

#SPJ1

To determine if each ordered pair is a point of intersection between the line x - y = 6 and the circle y² - 26 = -x², we need to substitute the values of x and y in both equations and see if they are true for both.

For the ordered pair (1, -5):

x - y = 6 becomes 1 - (-5) = 6, which is true.

y² - 26 = -x² becomes (-5)² - 26 = -(1)², which is false.

Therefore, (1, -5) is not a point of intersection.

For the ordered pair (1, 5):

x - y = 6 becomes 1 - 5 = -4, which is false.

y² - 26 = -x² becomes (5)² - 26 = -(1)², which is true.

Therefore, (1, 5) is a point of intersection.

For the ordered pair (5, -1):

x - y = 6 becomes 5 - (-1) = 6, which is true.

y² - 26 = -x² becomes (-1)² - 26 = -(5)², which is false.

Therefore, (5, -1) is not a point of intersection.

So the answer is:

(1,-5) - No

(1,5) - Yes

(5,-1) - No

to know more about equations

brainly.com/question/29657983

#SPJ1

A minimum sample size of 665 consumers that FiveThirtyEight should survey to guarantee a margin of error of 0.05 or less with a 99% confidence level.

Sample size refers to the number of observations or individuals included in a study or experiment. It is the number of subjects or units that are selected from a population to be studied. The sample size is an important consideration in statistical analysis, as it can affect the accuracy and generalizability of the results. A larger sample size generally leads to more precise estimates and stronger statistical power, but it can also be more costly and time-consuming to collect and analyze.

To calculate the minimum sample size required to maintain a margin of error of 0.05 or less with a 99% confidence level, we can use the formula:

n = (Z² * p * (1-p)) / E²

where n is the sample size, Z is the Z-score for the desired confidence level (2.576 for 99% confidence level), p is the estimated proportion of the population that has a certain characteristic (we can use 0.5 for maximum variability), and E is the margin of error.

Plugging in the values, we get:

n = (2.576² * 0.5 * (1-0.5)) / 0.05²

n = 664.3

Rounding up to the nearest whole number, we get a minimum sample size of 665 consumers that FiveThirtyEight should survey to guarantee a margin of error of 0.05 or less with a 99% confidence level.

To know more about sample size visit:

brainly.com/question/28789964

#SPJ1

Answer:

C and D

Step-by-step explanation:

cosA = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{AB}{AC}[/tex] = [tex]\frac{4}{5}[/tex] ⇒ C

sinA = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{BC}{AC}[/tex] = [tex]\frac{3}{5}[/tex] ⇒ D

Answer:

x = 9.0

Step-by-step explanation:

sin E = CD/EC = CD/x

<=>     sin 50 = 6.9/x     <=> x = 6.9/sin 50 ≅ 9.0

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

Using the fact that the triangles are similar we can see that the value of x is  36

We can see that the triangles are similar due to the same interior angles, then ther is a scale factor k between them.

So we can write:

20*k = 48

k = 48/20 = 2.4

Then:

x = 15*2.4

x = 36

That is the value of x.

Learn more about similar triangles at:

https://brainly.com/question/14285697

#SPJ1

Answer:150°

Step-by-step explanation:

Every day, the number of views of the video increases by 80% of the previous day's views.

Every day, the number of views of the video increases by a certain percentage. To find the daily percent change in the views, we can use the formula for percent change, which is given by:

percent change = ((new value - old value) / old value) * 100

In this case, the old value is the number of views at the start, which is 500, and the new value is the number of views after one day, which is given by:

V(1) = 500*(1.8)^1 = 900

Substituting these values into the formula, we get:

percent change = ((900 - 500) / 500) * 100 = 80%

In other words, for every day that passes, the number of views of the video is multiplied by a factor of 1.8.

To learn more about percent click on,

https://brainly.com/question/27452160

#SPJ4

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

1. Mean = 54

2. Standard Deviation = 6.3

3. Probability = 0.077

4. Probability = 0.845

5. Probability = 0.155

6. Probability = 0.323

All of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

The common ratio is the ratio that remains constant between successive function output values. The behaviour of a geometric sequence, which is a series of numbers where each term is produced by multiplying the one before it by a set number (the common ratio), depends on the common ratio. The sequence is rising exponentially if the common ratio is bigger than 1. The sequence decreases exponentially if the common ratio is between 0 and 1.

To show that the function form shows a constant ratio we take:

[tex](x+1) / f(x) = (ab^{(x+1)}) / (ab^x) = b[/tex]

Similarly, we have:

[tex]f(x+2) / f(x+1) = (ab^{(x+2)}) / (ab^{(x+1)}) = b[/tex]

Hence, all of these ratios are equal to b, and we have shown that there is a constant ratio between consecutive output values.

Learn more about ratio here:

https://brainly.com/question/29774220

#SPJ1

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

The expression for the problem is:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

Bruce charged David and Ricky a fixed fee of $42 for parts plus an hourly rate of $12 for labor. He spent 3 hours repairing the motorcycle. Since there are two people (David and Ricky), we need to multiply the hourly rate by the number of hours worked (3) and then multiply that by 2. Finally, we add the fixed fee for the parts to get the total cost.

To evaluate the expression using the order of operations, we need to perform the multiplication first and then the addition. So, we have:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

= $42 + ($36) × 2

= $42 + $72

= $114

Therefore, David and Ricky owe Bruce a total of $114 for the motorcycle repair.

Learn more expression on

https://brainly.com/question/1859113

#SPJ1

The probability that at least one customer arrives at the shop during a one-minute interval is 0.632.

Since the arrival of customers at a Starbucks shop can be modeled as a Poisson process with an average rate of 1/min, the probability of exactly k customers arriving in a one-minute interval is given by the Poisson probability mass function:

P(k arrivals) = (λ^k * e^(-λ)) / k!

where λ is the average rate of arrivals (in this case, 1/min), e is the mathematical constant e, and k! is the factorial of k.

To find the probability that at least one customer arrives during a one-minute interval, we can use the complement of the probability that zero customers arrive (i.e., the probability of at least one arrival is 1 minus the probability of zero arrivals).

Thus, the probability of at least one customer arriving during a one-minute interval is:

P(at least one arrival) = 1 - P(0 arrivals)

P(at least one arrival) = 1 - [([tex]1^{0}[/tex] * [tex]e^{-1}[/tex]) / 0!] = 1 - [tex]e^{-1}[/tex] = 0.632

Therefore, the probability that at least one customer arrives at the shop during a one-minute interval is 0.632.

Learn more about Poission;

https://brainly.com/question/30992240

#SPJ4

The length of the given line AB is 6 units and the polygon ABCDEF has been created.

A graph is a mathematical structure made up of a collection of points called VERTICES and a set of lines connecting some pair of VERTICES that may or may not be empty.

There is a chance that the edges will be directed, or orientated.

If the lines are directed or undirected, respectively, they are referred to as ARCS or EDGES.

Make a sequence of bars on graph paper as an example of a graph.

So, in the given situation the polygon ABCDEF has been created:

(Refer to the graph attached below)

Now, the length of the side AB:

Count the units as follows which comes to 6 units.

Therefore, the length of the given line AB is 6 units and the polygon ABCDEF has been created.

Know more about the graph here:

https://brainly.com/question/19040584

#SPJ1

Correct question:

Help Here is your graph of the points on the previous screen.

Connect the points in order to create polygon `ABCDEF`.

1.2 Enter the length of the segment between A and B.

The psychologist finds that the estimated Cohen's d is  0.32, the t statistic is 2. 83, and r² is 0.073.  Using r² and the extension of Cohen's guidelines for interpreting the effect size using r², there is a small treatment effect.   job seeker finds that the estimated Cohen's d is 0.88, the t statistic is 7. 78, and r² is 0.479.Using r² and the extension of Cohen's guidelines for interpreting the effect size with r², there is a large treatment effect

To calculate the estimated Cohen's d, we use the formula

d = (M - M0) / SD

where M is the mean of the treatment group (job seekers who received training on using the Internet to find job listings), M0 is the mean of the control group (typical job seeker), and SD is the pooled standard deviation of the two groups. Using the given values, we have

M = 8.7 months

M0 = 7.4 months

SD = 4.1 months

So, d = (8.7 - 7.4) / 4.1 = 0.32

Using Cohen's guidelines for interpreting effect size with Cohen's d, a value of 0.2 is considered a small effect, 0.5 a medium effect, and 0.8 a large effect. Therefore, with an estimated Cohen's d of 0.32, there is a small treatment effect.

To calculate r², we use the formula

r² = t² / (t² + df)

where t is the t statistic, df is the degrees of freedom (n-2 for a two-group design), and n is the sample size. Using the given values for the Internet training group, we have

t = 2.83

n = 81

df = 79

So, r² = 2.83² / (2.83² + 79) = 0.073

Using the extension of Cohen's guidelines for interpreting effect size with r², a value of 0.01 is considered a small effect, 0.09 a medium effect, and 0.25 a large effect. Therefore, with an r² of 0.073, there is a small treatment effect.

For the job seekers who received training on interview skills, we can calculate Cohen's d and r² in a similar way

d = (M - M0) / SD = (8.1 - 7.4) / 0.8 = 0.88

t = 7.78

n = 81

df = 79

r² = 7.78² / (7.78² + 79) = 0.479

Using Cohen's guidelines for interpreting effect size with Cohen's d, a value of 0.2 is considered a small effect, 0.5 a medium effect, and 0.8 a large effect. Therefore, with an estimated Cohen's d of 0.88, there is a large treatment effect.

Using the extension of Cohen's guidelines for interpreting effect size with r², a value of 0.01 is considered a small effect, 0.09 a medium effect, and 0.25 a large effect. Therefore, with an  r² of 0.479, there is a medium to large treatment effect.

To know more about estimated Cohen's d:

https://brainly.com/question/31427772

#SPJ4

Answer:.317

.091

Small to med

Med

.875

.431

Large

Large

Step-by-step explanation:

The longest segment that would fit inside the cylinder is approximately 9.06 centimeters.

The longest segment that would fit inside the cylinder would be the diagonal of the cylinder's base, which is equal to the diameter of the base. The diameter of the base is equal to twice the radius, so it is 6 cm. Using the Pythagorean theorem, we can find the length of the diagonal:

[tex]diagonal^2 = radius^2 + height^2 \\diagonal^2 = 3^2 + 8^2 \\diagonal^2 = 9 + 64 \\diagonal^2 = 73 \\diagonal = sqrt(73)[/tex]

Therefore, the longest segment that would fit inside the cylinder is approximately 8.54 cm (rounded to the nearest hundredth).
To find the longest segment that would fit inside the cylinder, we need to calculate the length of the space diagonal of the cylinder. This is the distance between two opposite corners of the cylinder, passing through the center. We can use the Pythagorean theorem in 3D for this calculation.

The terms we'll use are:
- Radius (r): 3 cm
- Height (h): 8 cm

To find the space diagonal (d), we can use the following formula:

[tex]d = \sqrt{r^2 + r^2 + h^2}[/tex]
Plug in the values:

[tex]d = \sqrt{((3 cm)^2 + (3 cm)^2 + (8 cm)^2)} d = \sqrt{(9 cm^2 + 9 cm^2 + 64 cm^2)} d = \sqrt{(82 cm^2)}[/tex]
d ≈ 9.06 cm

Learn more about cylinder here:

https://brainly.com/question/23991640

#SPJ11

The longest segment that can fit inside the cylinder is. [tex]$\sqrt{73}$ cm[/tex].

The longest segment that can fit inside a cylinder is a diagonal that connects two opposite vertices of the cylinder.

The length of this diagonal by using the Pythagorean theorem.

Pythagorean theorem or Pythagoras' theorem is a fundamental relation in Euclidean geometry between the three sides of a right triangle.

It states that the area of the square whose side is the hypotenuse (the side opposite the right angle) is equal to the sum of the areas of the squares on the other two sides.

This theorem can be written as an equation relating the lengths of the sides a, b and the hypotenuse c, often called the Pythagorean equation:[1]

[tex]{\displaystyle a^{2}+b^{2}=c^{2}.}[/tex]

The theorem is named for the Greek philosopher Pythagoras, born around 570 BC.

The theorem has been proven numerous times by many different methods – possibly the most for any mathematical theorem.

The proofs are diverse, including both geometric proofs and algebraic proofs, with some dating back thousands of years.

Consider a right triangle with legs equal to the radius.

[tex]$r$[/tex] and the height [tex]$h$[/tex] of the cylinder, and with the diagonal as the hypotenuse.

Then, by the Pythagorean theorem, the length of the diagonal is:

[tex]$\sqrt{r^2 + h^2} = \sqrt{3^2 + 8^2} = \sqrt{73}$[/tex]

For similar questions on cylinder

https://brainly.com/question/23935577

#SPJ11

The surface area of the cylinder is approximately 94.2 ft².

Surface area refers to the total area of the external or outer part of an object. It is the sum of the areas of all the individual surfaces or faces of the object. Surface area is typically measured in square units, such as square inches (in²), square feet (ft²), or square meters (m²), depending on the unit of measurement used.

According to the given information:

The surface area of a cylinder is the sum of the lateral surface area (the curved surface) and the area of the two circular bases.

The formula for the lateral surface area of a cylinder is given:

Lateral Surface Area = 2πrh

where r is the radius of the cylinder and h is the height of the cylinder.

Plugging in the given values for the radius (r = 3 ft) and height (h = 2 ft), we can calculate the lateral surface area:

Lateral Surface Area = 2π * 3 * 2 = 12π ft²

The formula for the area of a circle (which represents the bases of the cylinder) is given:

Circle Area = πr²

Plugging in the given value for the radius (r = 3 ft), we can calculate the area of each circular base:

Circle Area = π * 3² = 9π ft²

Since there are two bases in a cylinder, we multiply this by 2 to account for both bases:

2 * Circle Area = 2 * 9π = 18π ft²

Now, we can add the lateral surface area and the area of the two bases to find the total surface area of the cylinder:

Total Surface Area = Lateral Surface Area + 2 * Circle Area

= 12π + 18π

= 30π ft²

As a decimal rounded to the nearest tenth, the surface area of the cylinder is approximately 94.2 ft²

To know more about surface area visit: https://brainly.com/question/22074027

#SPJ1

The area of Habib's diagram when s = 1/2 is 7.

What is circle?

A circle is a geometric shape that consists of all points in a plane that are equidistant from a fixed point called the center. It can also be defined as the set of points that are a fixed distance (called the radius) away from the center point. The distance around the circle is called its circumference, and the distance across the circle passing through the center is called its diameter.

To find the area of Habib's diagram when s = 1/2, we just need to substitute s = 1/2 into the expression for the area:

Area = 6 + 4s²

Area = 6 + 4(1/2)²

Area = 6 + 4(1/4)

Area = 6 + 1

Area = 7

Therefore, the area of Habib's diagram when s = 1/2 is 7.

To learn more about circle from the given link:

https://brainly.com/question/29142813

#SPJ1

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

For a normal distribution ,a positive value of z simply means that the observation or sample mean is above the population mean this implies

none of the options provided is completely accurate.

All the observations must have had positive values,

It is not necessarily true for a positive value of z.

The value of z indicates how many standard deviations away from the mean a particular observation or sample mean is.

A positive value of z simply means that the observation or sample mean is above the population mean.

The area corresponding to the z is either positive or negative,

It is also not accurate.

The area under the normal curve corresponds to probabilities, not positive or negative values.

The area to the right of the mean corresponds to positive z-values, and the area to the left of the mean corresponds to negative z-values.

The sample mean is smaller than the population mean,

It is a possibility when the z-value is negative, indicating that the sample mean is below the population mean.

The sample mean is larger than the population mean,

It is a possibility when the z-value is positive, indicating that the sample mean is above the population mean.

Therefore, the sample mean can be either larger or smaller than the population mean depending on the direction of the z-value.

Learn more about population mean here

brainly.com/question/29064364

#SPJ4

Therefore, the statement "The sample mean absolute deviation is likely to be higher for the samples with lower satisfaction rates" would be the BEST description of the MAD for this data set.

To calculate the mean absolute deviation (MAD), we first need to find the mean of each sample.

Sample 1:[tex]17/25 = 0.68[/tex]

Sample 2: [tex]12/25 = 0.48[/tex]

Sample 3: [tex]14/25 = 0.56[/tex]

Sample 4: [tex]9/25 = 0.36[/tex]

Next, we calculate the deviation of each observation from its respective sample mean:

Sample 1: |0.68 - x1|, |0.68 - x2|, ..., |0.68 - x25|

Sample 2: |0.48 - x1|, |0.48 - x2|, ..., |0.48 - x25|

Sample 3: |0.56 - x1|, |0.56 - x2|, ..., |0.56 - x25|

Sample 4: |0.36 - x1|, |0.36 - x2|, ..., |0.36 - x25|

where xi is the satisfaction rating (0 or 1) of the Ith customer in the sample.

The MAD is the average of these deviations:

MAD = (|0.68 - x1| + |0.68 - x2| + ... + |0.36 - x25|)/100

Since we don't know the actual ratings of the customers, we cannot calculate the MAD exactly. However, we can say that the MAD is likely to be higher for samples 2 and 4, which have lower satisfaction rates, compared to samples 1 and 3, which have higher satisfaction rates. Therefore, the statement "The sample mean absolute deviation is likely to be higher for the samples with lower satisfaction rates" would be the BEST description of the MAD for this data set.

To know more about average visit:

https://brainly.com/question/27646993

#SPJ1

Answer:

7,000,000÷2000

= 3,500

Step-by-step explanation:

therefore, each worker makes 3500 bikes per year

Answer: Sarah bought 5 first class tickets and (13-5) = 8 coach tickets.

Step-by-step explanation: The taken a toll of one to begin with lesson ticket is $1200 and the fetched of one coach ticket is $380.

So, the full taken a toll of first class tickets would be 1200x and the entire cost of coach tickets would be 380(13-x) = 4940 - 380x.

The overall fetched of the tickets is given as $9040, so we will set up the taking after condition:

1200x + 4940 - 380x = 9040

Streamlining and tackling for x, we get:

820x = 4100

x = 5