Answer:
Explanation:
Elements on the right side of the periodic table are very likely to form negative ions -- all of those except elements in the 8th or 18th column (depending on how your periodic table is numbered).
K and Mg are on the left side, so they will not form negative ions.
They give up 1 (for K) electron and 2 (for Mg) electrons which will leave plus charges for the ions.
On the other hand S and I are on the right side of the periodic table. They will take on electrons and hence be charged with a minus.
List 3 natural resources (non-living) found in the “glorious place”
Answer:
уфукингнегроитукиурепоинты
Explanation:
One method of increasing the chances of particles colliding during a reaction is to...
1)decrease temperature
2) decrease concentration
3)increasing concentration
4)use a catalyst
Answer:
3
Explanation:
Increasing concentration
What type of reaction is shown below?
C5H12() + 502(g) → 5CO2(g) + 6H2(g)
A. Combustion
B. Precipitation
C. Neutralization
D. Decomposition
Answer:
A. Combustion.
Explanation:
Hello there!
In this case, according to the given information about the shown chemical reaction, whereby liquid pentane reacts with oxygen to produce carbon dioxide and hydrogen (should be water); we can use the attached file to realize this is a A. Combustion reaction as it has CO2 and H2O on the products side from a hydrocarbon fuel.
Regards!
Which climate condition will cause the fastest chemical weathering of granite sandstone and shale
Answer:
1. Tropical Climate
Explanation:
Due to the high heat in tropical climates, the moisture speeds up chemical weathering
How many grams of octane (C8H18) must be burned to produce 300.0g of CO2?
2 C8H18 + 25 O2 → 16 CO2 + 18 H2O
Answer:
[tex]m_{C_8H_{18}}=85.67gC_8H_{18}[/tex]
Explanation:
Hello there!
In this case, according to the given combustion reaction of octane, it is possible for us to perform the stoichiometric method in order to calculate the mass of octane that is required to consume 300.0 g of oxygen by considering the 2:25 mole ratio, and the molar masses of 114.22 g/mol and 32.00 g/mol respectively:
[tex]m_{C_8H_{18}}=300.0gO_2*\frac{1molO_2}{32.00gO_2}*\frac{2molC_8H_{18}}{25molO_2}*\frac{114.22gC_8H_{18}}{1molC_8H_{18}} \\\\m_{C_8H_{18}}=85.67gC_8H_{18}[/tex]
Regards!
help me with questions 6,11,15,16 and 17 please
ayúdame con las preguntas 6,11,15,16 y 17 por favor
PLEASE HURRY I WILK TIVE BRAINYEST
What is the weather like in a temperate grassland? (Select all that apply.)
A) summers are mild to hot
B) winters are cold
C) summers are cool
D) winters are mild
Answer:
A. Summers are mild to hot, B. Winters are cold.
PLEASE HELP!! NO LINKS PLEASE REAL ANSWER!!!!!
What will be volume of 20.0 g of CH4 gas at a pressure of 0.950 atm and temperature of 21.0 oc?Question 1 options:
A. 21.8 L
B. 31.8 L
C. 2.27 L
D. 4.27 L
Which of the compounds shown are structural
isomers of this compound? Check all that apply.
A
B
С
D
Answer:
A & C
Explanation:
The next one is A Edge 2022
The compound which are the structural isomers of the given compound is compound A & C.
What are structural isomers?Structural isomers are those isomers in which which are having the same molecular formula but different structural structures.
Compound A: A is the structural isomer of the given compound as they both have same number of carbon and hydrogen atoms present in that.Compound B: B is not the structural isomer of the given ompound as they have not equal number of carbon and hydrogen atoms in it.Compound C: C is the structural isomer of the given compound as they both have same number of carbon and hydrogen atoms present in that.Compound D: D is not the structural isomer of the given ompound as they have not equal number of carbon and hydrogen atoms in it.Hence A & C are the structural isomers of given compound.
To know more about structural isomers, visit the below link:
https://brainly.com/question/26298707
What locations are likely to be affected by an earthquake or tsunami?
San Francisco, California, USA
San Francisco, Tokyo, and Asunción
Tokyo, Japan
None of the locations
Asunción, Paraguay, South America
Answer:
All the locations can suffer earthquakes and a handful like tokyo tsunami so the question is either or so the anwer would be all
Explanation:
Please help answer this Guy's HELP it's very Important
Answer:
Explanation:
1. HCl helps breakdown,absorb and digest food and also destroy bacterias in the stomach.
2. Organic Matter promotes good soil structure and act as reservoir of nutrients in the soil.
3. The nature of the solution is Basic
Reason... Blue litmus will remain blue in a basic solution and turn Red in an acidic solution
4. There's a number of test available for her to use but preferably... She should use the Litmus paper test. That's easier. An acidic solution will Turn a blue litmus red while the blue litmus will retain its blue color in a basic solution.
How many milliliters of 0.010 M NaOH are required to exactly neutralize
20.0 milliliters of 0.020 M HCI?
30 mL
10 mL
40mL
20mL
Answer:20
Explanation:
Suppose you needed to explain the concept of the mole to a junior high school student. What would you tell them?
Answer:
Explanation:
duehgjvcujhyeq bvckjfdsaeb gjdksghUIBGREQWMNHGTRE BAGTFEQA
Compute the number of electrons that each lead atom donates, on average, to a bulk piece of lead metal. Room temperature data for lead: The conductivity of lead is 4.90 × 104 1/(Ω·m) The electron mobility of lead is 2.3 cm2/(V·s) The mass density of lead is 11.4 g/cm3 The atomic weight of lead is 207 g/mol
Answer:
4 electrons/atom
Explanation:
The conductivity of the lead σ = neμ where n = electron density, e = electron charge = 1.602 × 10⁻¹⁹ C and μ = electron mobility of lead = 2.3 cm²/(V·s) = 2.3 × 10⁻⁴ m²/(V.s)
Making n subject of the formula, we have
n = σ/eμ
Since σ = 4.90 × 10⁶ (Ω·m)⁻¹
Substituting the values of the variables into the equation, we have
n = σ/eμ
n = 4.90 × 10⁶ (Ω·m)⁻¹/(1.602 × 10⁻¹⁹ C × 2.3 × 10⁻⁴ m²/(V.s))
n = 4.90 × 10⁶ (Ω·m)⁻¹/(3.6846 × 10⁻²³ Cm²/(V.s))
n = 1.33 × 10²⁹ electrons/m³
We now find the number of moles of lead present in 1 m³ of lead.
So n' = ρ/M where ρ = density of lead = 11.4 g/cm³ = 11.4 g/cm³ × 10⁶ cm³/m³ = 11.4 × 10⁶ g/m³ and M = atomic weight of lead = 207 g/mol
So, n' = ρ/M
N = 11.4 × 10⁶ g/m³/207 g/mol
n' = 0.0551 × 10⁶ mol/m³
n' = 5.51 × 10⁴ mol/m³
Since n' = N/N' where N = number of atoms of lead in 1 m³ of lead and N = Avogadro's constant = 6.022 × 10²³ mol⁻¹
N = n'N' = 5.51 × 10⁴ mol/m³ × 6.022 × 10²³ mol⁻¹
N = 33.18 × 10²⁷ atoms/m³
N = 3.318 × 10²⁸ atoms/m³
So, the number of electron per atom is N" = n/N
= 1.33 × 10²⁹ electrons/m³ ÷ 3.318 × 10²⁸ atoms/m³
= 0.4 × 10¹ electrons/atom
= 4 electrons/atom
Disadvantages of using cisplatin as an anti-cancer drug
Answer: The following side effects are common (occurring in greater than 30%) for patients taking Cisplatin:
Nausea and vomiting. Nausea may last up to 1 week after therapy.
Low blood counts.
Kidney toxicity.
Ototoxicity hearing loss, ringing in the ears.
Blood test abnormalities (low magnesium, low calcium, low potassium)
Explanation:
My mind is ok :')
If the experiment were repeated using a cuvettes with a path length of 2.0 cm, how would that affect the absorbance values for the Co2 solutions (if at all), assuming all of the concentrations remained unchanged?
Answer:
..............................
What is the volume of the gas if there are 3.20 mol of gas at 265 K and 2.50 atm of pressure?
Answer:
27.81 L
Explanation:
Assuming the gas is ideal, we can solve this problem by using the following formula:
PV = nRTWhere:
P is Pressure, 2.50 atmV is Volumen is the number of moles, 3.20 molR is a constant, 0.082 atm·L·mol⁻¹·K⁻¹T is temperature, 265 KWe input the data:
2.50 atm * V = 3.20 mol * 0.082 atm·L·mol⁻¹·K⁻¹ * 265 KAnd solve for V:
V = 27.81 LWhat is the correct molecular geometry for NBr2F?
Answer:
Molecular geometry of o3
Ozone has three electron groups around the central oxygen, so has the trigonal planar electron geometry. The molecular geometry is bent: The Effect of Lone Pairs (contd.) With four electron groups (tetrahedral electron geometry), there can be one or two lone pairs around the central atom.
Which of these statements is true?
1. Electrons reach higher energy levels when they move closer to the nucleus.
2. An electron can absorb energy only from light.
3. The spectrum of hydrogen consists of all frequencies of radiation.
4. The emission spectrum of each element is unique
Alkenes provide many ways for incorporating oxygen atoms at specific locations in our molecule.
a. True
b. False
Answer:
True
Explanation:
Answer:
True
hope it is helpful to you
Reveal the protein to trait example. How did the differences and proteins lead to different traits for this feature.
Please help me no links.
Explanation:
Proteins are responsible for shaping and growth of an organism. Explanation: The differences in proteins lead to different in traits because it is the protein that determines the trait. ... These proteins shaped the structure of organisms so we can say that difference in traits occur due to difference in their proteins.
A cylindrical rod of copper (E = 110 GPa) having a yield strength of 240 MPa is to be subjected
to a load of 6660 N. If the length of the rod is 380 mm, what must be the diameter to allow an
elongation of 0.50 mm?
Answer:
required diameter is 7.65 mm
Explanation:
Given the data in the question;
F = 6660 N
l₀ = 380 mm = 0.38 m
E = 110 GPa = 110 × 10⁹ N/m²
Δl = 0.50 mm = 0.0005 m
So, lets assume the deformation is elastic;
d₀ = √( [4l₀F] / [πEΔl] )
we substitute
d₀ = √( [4 × 0.38 × 6660] / [π × (110 × 10⁹) × 0.0005]] )
d₀ = √( 10123.2 / 172787595.947 )
d₀ = √( 5.85875 × 10⁻⁵ )
d₀ = 0.007654 m
d₀ = ( 0.007654 × 1000 )mm
d₀ = 7.65 mm
Therefore, required diameter is 7.65 mm
Jim makes a mixture which contains 10 mg of salt, 30 mg of sand, and some iron filings. The total mass of the mixture is 100 mg
Which amount of iron filings does Jim use in the mixture?
A10
B30
C40
D60
Answer:
Amount of iron fillings in mixture = 60 mg
Explanation:
Given:
Total mass of mixture = 100 mg
Amount of salt in mixture = 10 mg
Amount of sand in mixture = 30 mg
Find:
Amount of iron fillings in mixture
Computation:
Using Law of Conservation of mass;
Total mass of mixture = Amount of salt in mixture + Amount of sand in mixture + Amount of iron fillings in mixture
100 = 10 + 30 + Amount of iron fillings in mixture
100 = 40 + Amount of iron fillings in mixture
Amount of iron fillings in mixture = 100 - 40
Amount of iron fillings in mixture = 60 mg
hydrogen chloride, hydrogen nitrate (v), sodium chloride, sodium hydroxide. Name a substance known as common salt
Answer:
C: Sodium chloride
Explanation:
Common salt is gotten when sodium atoms reacts with chlorine atoms in an exothermic reaction to form an ionic substance known as sodium chloride with the chemical formula NaCl.
Equation is;
2Na + Cl2 = 2NaCl
Looking at the options, the correct one is Sodium chloride.
What is the mass of 4 × 1015 atoms of nickel
(Ni)?
Answer in units of g.
Solid AgCl (Ksp = 1.8 X 10-10) is placed in a beaker of water. After a period of time, the Ag+ concentration is measured and found to be 2.5 X 10-7 M.
a) What is the concentration of Cl-?
b) Has the system reached equilibrium?
c) Will more AgCl dissolve?
Explanation:
a)
[tex]k _{sp} = [Ag {}^{ + } ][Cl {}^{ - } ] \\ but \: [Ag {}^{ + } ] = [Cl {}^{ - } ] \\ k _{sp} = [Ag {}^{ + } ] {}^{2} \\ [Ag {}^{ + } ] = \sqrt{k _{sp}} \\ = \sqrt{1.8 \times {10}^{ - 10} } \\ = 1.34 \times {10}^{ - 5} mol {dm}^{ - 3} [/tex]
b)
It has not reached equilibrium because the silver concentration is not yet equal to the value of Ksp.
c)
Yes it will dissolve in order to establish the equilibrium.
What is the initial and final mass of the zinc and copper?
Answer:the final mass of copper is 3.84 g. There was an increase in mass of 1.84 g from the initial mass of 2.0 g.
Explanation:
why do we have to write the background of the study
Answer:
Writing down background information can help you to remember what you learned and can be used for notes in the future when taking an assessment.
Explanation:
Can I get brainliest? It's for a challenge
What are the substances that interact to form new substances in a chemical reaction called?
A. Reactants
B. Products
C. Chemicals
D. Substances
Answer:
A. Reactants
Explanation:
A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.
help i will mark brainliest
Answer:
Image A
Explanation:
The hemisphere experiences summer when it is tilted towards the sun. Image a has the northern hemisphere tilted towards the sun.
Answer:
image A
Explanation:
this is because the sun is hitting earth at a steep angle