which of the following is not true for minerals? group of answer choices they have a specific, internal, crystallize structure. they can be identified by characteristic physical properties. they have a specific, predictable chemical composition. they can be liquid, solid, or gas.

The type of reactions that lyases catalyze are the removal of a chemical group from a substrate  and aldol reactions. The substrates involved in lyase-catalyzed reactions vary depending on the specific enzyme.

Lyases are enzymes that catalyze the cleavage or addition of chemical groups to a substrate, without the involvement of water molecules. Lyases typically break chemical bonds or catalyze the formation of new ones.

Lyases catalyze two types of reactions:

Removal of a chemical group from a substrate (decarboxylation, deamination, or dehydration)

Addition of a chemical group to a substrate (aldol addition or reverse aldol condensation)

The substrates involved in lyase-catalyzed reactions vary depending on the specific enzyme.

For example, fumarase is a lyase that catalyzes the reversible conversion of fumarate to L-malate, while pyruvate decarboxylase is a lyase that catalyzes the decarboxylation of pyruvate to acetaldehyde and carbon dioxide.

Other examples of lyase-catalyzed reactions include the removal of ammonia from amino acids, and the addition or removal of phosphate groups from nucleotides.

To learn  more about lyases, click here:

https://brainly.com/question/31538635

#SPJ11

The mass of the sodium azide that is required in the process is  125 g.

The equation of the reaction can be given as;

2 NaN3 (s) → 2 Na(s) + 3 N2 (g)

If 1 mole of the N2 gas occupies 22.4 L

x moles of N2 gas occupies 65.1 L

x = 65.1 * 1/22.4

= 2.9 moles

Now;

2 moles of NaN3 produces 3 moles of N2

x moles pf NaN3 produces 2.9 moles

x = 2 * 2.9/3

= 1.93 moles

Mass of the NaN3 = 1.93 moles * 65 g/mol

= 125 g

We can see that we can use the moles to obtain the e number of grams of NaN3 that must be included in the real air bag to generate this amount of N2

Learn more about moles:https://brainly.com/question/31597231

#SPJ1

The hydronium ion concentration in a solution can be calculated using the formula pH log H3O+. For the solution with a pH of 12.1, we can calculate the hydronium ion concentration as follows: pH = -log H3O+12.1 = -log H3O+H3O+ 7.94 x 10 13 Since the hydronium ion concentration is very low, this solution is considered basic.

For the solution with a pH of 7.0, we can calculate the hydronium ion concentration as follows, pH = -log[H3O+]7.0 = -log[H3O+][H3O+] = 1 x 10^-7 Since the hydronium ion concentration is equal to 1 x 10^-7, this solution is considered neutral. For the solution with a pH of 6.2, we can calculate the hydronium ion concentration as follows: pH = -log[H3O+]6.2 = -log[H3O+][H3O+] = 1.58 x 10^-7 Since the hydronium ion concentration is slightly higher than in a neutral solution, this solution is considered slightly acidic .pH = -log H3O+12.1 = -log H3O+H3O+ 7.94 x 10 13 Since the hydronium ion concentration is very low, this solution is considered basic.

learn more about hydronium here

https://brainly.com/question/30263196

#SPJ11

To test for oxygen, you can use a glowing splint test. To test for hydrogen, you can use the "pop test." To test for carbon dioxide, you can use a limewater test.

Here's a step-by-step explanation of how to test for each of these gases:

1. Oxygen:
- Step 1: Light a wooden splint or a glowing ember.
- Step 2: Blow out the flame to ensure that the splint is smoldering and not burning.
- Step 3: Insert the smoldering splint into a test tube containing the gas to be tested.
- Step 4: Observe the reaction. If the splint reignites, it indicates the presence of oxygen.

2. Hydrogen:
- Step 1: Light a wooden splint or a matchstick.
- Step 2: Hold the lit splint near the opening of a test tube containing the gas to be tested.
- Step 3: Observe the reaction. If you hear a distinctive "squeaky pop" sound, it indicates the presence of hydrogen.

3. Carbon Dioxide:
- Step 1: Prepare a solution of lime water (calcium hydroxide in water) in a test tube or beaker.
- Step 2: Collect the gas to be tested in a separate test tube or gas syringe.
- Step 3: Bubble the gas through the lime water solution using a gas delivery tube.
- Step 4: Observe the reaction. If the lime water solution turns milky or cloudy, it indicates the presence of carbon dioxide.

Learn more about pop test here: brainly.com/question/13151654

#SPJ11

It will take approximately 58.9 minutes to electroplate 36.1 g of gold by running 5.00 A of current through a Au+ solution.

To solve this problem, we need to use Faraday's law, which relates the amount of substance that is deposited during an electroplating process to the quantity of electricity that is passed through the solution.

The general equation for Faraday's law is:

mass of substance = (current x time x atomic mass) / (number of electrons x Faraday's constant)

where:

current is the electrical current that is passed through the solution, in amperes (A)

time is the duration of the electroplating process, in seconds (s)

atomic mass is the molar mass of the substance being deposited, in grams per mole (g/mol)

number of electrons is the number of electrons that are involved in the redox reaction that is taking place at the electrode

Faraday's constant is the charge of one mole of electrons, which is equal to 96,500 coulombs per mole (C/mol)

To find the mass of Cu that is electroplated, we can use the following equation:

mass of Cu = (current x time x atomic mass of Cu) / (2 x Faraday's constant)

where the atomic mass of Cu is 63.55 g/mol, and the number of electrons involved in the reaction is 2 (since each Cu2+ ion requires 2 electrons to be reduced to Cu).

Plugging in the values, we get:

mass of Cu = (13.5 A x 4.00 x 3600 s x 63.55 g/mol) / (2 x 96,500 C/mol)

mass of Cu = 41.1 g

Therefore, 41.1 g of Cu will be electroplated by running 13.5 A of current through a Cu2+ solution for 4.00 h.

To find the time required to electroplate 36.1 g of gold, we can rearrange the equation for Faraday's law to solve for time:

time = (mass of substance x number of electrons x Faraday's constant) / (current x atomic mass of substance)

Since the atomic mass of gold is 196.97 g/mol and the number of electrons involved in the reaction is 1 (since each Au+ ion requires 1 electron to be reduced to Au), we can plug in the values and solve for time:

time = (36.1 g x 1 x 96,500 C/mol) / (5.00 A x 196.97 g/mol)

time = 3536 s

Converting to minutes, we get:

time = 58.9 min

Know more about electroplate here:

https://brainly.com/question/20112817

#SPJ11

Propylamine, also known as 1-aminopropane, reacts with water to form propylammonium hydroxide. The chemical equation for this reaction is: CH₃CH₂CH₂NH₂ + H₂O → CH₃CH₂CH₂NH₃⁺ + OH⁻

The condensed structural formula for propylamine is CH₃CH₂CH₂NH₂, and for water is H₂O. Propylamine is an organic compound with the molecular formula C3H9N. It is a primary amine with a propyl group attached to the nitrogen atom. Propylamine is a colorless liquid that has a strong, unpleasant odor. It is used in the production of pharmaceuticals, agrochemicals, and other chemicals.

When propylamine is added to water, it undergoes a chemical reaction in which a proton (H+) from water is transferred to the nitrogen atom of the propylamine molecule, forming a propylammonium ion CH₃CH₂CH₂NH₃⁺ and a hydroxide ion OH⁻. This reaction is an example of a base-catalyzed hydrolysis, as water acts as a base to catalyze the reaction.

learn more about Propylamine here:

https://brainly.com/question/31314114

#SPJ4

Upon equilibrium cooling of a hypereutectoid composition austenite, the first new phase to appear is proeutectoid cementite.

Hypereutectoid steel has a carbon composition that exceeds the eutectoid point (0.8% carbon), resulting in a higher percentage of cementite in the microstructure. During the equilibrium cooling process, the temperature gradually decreases, allowing the phases to transform at specific points on the iron-carbon phase diagram. As the temperature lowers to the eutectoid temperature (around 727°C or 1340°F), proeutectoid cementite begins to form, which is the initial precipitation of cementite before the eutectoid reaction occurs.

This phase nucleates at the grain boundaries of austenite and slowly grows into a lamellar structure, known as pearlite. Pearlite consists of alternating layers of ferrite (α-iron) and cementite (Fe3C), resulting from the eutectoid transformation of austenite. The equilibrium cooling process ensures that the transformations occur at a constant temperature, allowing for a uniform distribution of phases and preventing non-equilibrium phases from forming, this results in a microstructure with improved mechanical properties, such as increased strength and hardness, compared to non-equilibrium cooling processes like rapid quenching. Upon equilibrium cooling of a hypereutectoid composition austenite, the first new phase to appear is proeutectoid cementite.

Learn more about hypereutectoid steel here:

https://brainly.com/question/16447246

#SPJ11

0.406M is the concentration of chloride ion. Concentration in chemistry refers to the quantity of a material in a certain area.

Concentration in chemistry refers to the quantity of a material in a certain area. The ratio of the solute within a solution to the solvent or whole solution is another way to define concentration. In order to express concentration, mass every unit volume is typically used.

The solute concentration can, however, alternatively be stated in moles or volumetric units. Concentration may be expressed as per unit mass rather than volume. Although concentration is typically used to describe chemical solutions, it may be computed for any mixture.

Concentration of chloride ion = 2×0.203

                                          =0.406M

To know more about Concentration, here:

https://brainly.com/question/10725862

#SPJ1

When the Cu electrode's mass is double what it was initially, the initial voltage will be the same as the voltage from the first experiment. The equation for the cell potential does not include and is unaffected by the mass and concentration of Cu(s).

The strong oxidising properties of the redox pair are indicated by the positive value of the standard electrode potential of Cu2+/Cu, and copper is unable to displace hydrogen from acid. As stability depends on the hydration energy of the ions when they connect to the water molecules, Cu2+ is more stable than Cu+. Because the Cu2+ ion makes significantly stronger bonds and has a higher charge density than the Cu+ ion, it releases more energy. Q.

Read more about cell voltage at

https://brainly.com/question/28303123

#SPJ4

715,373 coulombs of electric charge are required to produce 66.7 g of aluminum metal from a sample of molten aluminum fluoride.

To determine the coulombs of electric charge required to produce 66.7 g of aluminum metal from a sample of molten aluminum fluoride, follow these steps:
Step 1: Calculate the moles of Al(s) produced.
To do this, use the molar mass of aluminum (Al), which is 26.98 g/mol.
Moles of Al = mass of Al / molar mass of Al
Moles of Al = 66.7 g / 26.98 g/mol ≈ 2.47 moles

Step 2: Calculate the moles of electrons needed.
As given, it requires 3 moles of electrons to plate 1 mole of Al(s).
Moles of electrons = moles of Al * 3
Moles of electrons = 2.47 moles * 3 = 7.41 moles

Step 3: Calculate the total coulombs required.
Use Faraday's constant, which is 96,485 C/mol (coulombs per mole of electrons).
Coulombs required = moles of electrons * Faraday's constant
Coulombs required = 7.41 moles * 96,485 C/mol ≈ 715,373 C

So, approximately 715,373 coulombs of electric charge are required to produce 66.7 g of aluminum metal from a sample of molten aluminum fluoride.

Learn more about electric charge here:

https://brainly.com/question/9194793

#SPJ11

When the temperature of an exothermic reaction is increased, the value of the equilibrium constant, Kc, decreases.

This is because an increase in temperature favors the exothermic direction of the reaction, causing the concentration of products to decrease and the concentration of reactants to increase, ultimately shifting the equilibrium position towards the reactants side. Therefore, the Kc value decreases because the numerator (concentration of products) decreases while the denominator (concentration of reactants) increases.

To understand what is an exothermic reaction : https://brainly.com/question/2924714

#SPJ11

Current drift is a phenomenon where the magnitude of a current flowing through a circuit changes over time due to various factors such as temperature, humidity, and aging of components. This can have a significant impact on the results of an experiment, especially if precise and accurate measurements are required.

For instance, in experiments involving current measurements, current drift can lead to inaccurate readings, which can in turn affect the calculated values of other parameters such as resistance, capacitance, and voltage. This can result in erroneous conclusions and incorrect decisions.

To minimize the impact of current drift on experimental results, scientists and engineers use various techniques such as regular calibration of instruments, the use of stable power sources, and appropriate temperature and humidity control.

These measures help ensure that the experimental conditions remain as constant as possible, reducing the effect of current drift on the results.

To know more about Current drift refer here:

https://brainly.com/question/1686356#

#SPJ11

The concentration of the original acetic acid solution is 0.0933 mol/L.

To find the concentration of the original acetic acid solution, we can use the following equation:

moles of acid = moles of base

First, we need to find the moles of NaOH used in the titration:

moles of NaOH = Molarity of NaOH x Volume of NaOH used (in liters)
moles of NaOH = 0.125 mol/L x 0.02240 L
moles of NaOH = 0.00280 mol

Since acetic acid is a monoprotic acid, it reacts with one mole of NaOH to form one mole of water and one mole of sodium acetate (NaC₂H₃O₂). Therefore, the moles of acetic acid in the original solution can be calculated as:

moles of acetic acid = moles of NaOH used

moles of acetic acid = 0.00280 mol

Now we can calculate the concentration of the original acetic acid solution using the formula:

Molarity of acid = moles of acid / volume of acid solution used (in liters)

The volume of acid solution used is the sum of the volume of acetic acid solution and the volume of water added to it:

Volume of acid solution used = 15.00 mL + 15.00 mL = 0.0300 L

Substituting the values, we get:

Molarity of acetic acid = 0.00280 mol / 0.0300 L

Molarity of acetic acid = 0.0933 mol/L

Learn more about titration here: https://brainly.com/question/27107265

#SPJ11

Pepsin functions normally in a low pH environment, specifically in the acidic environment of the stomach. Pepsin is an enzyme that is primarily responsible for breaking down proteins into smaller peptides.

It is secreted by the chief cells of the stomach in an inactive form called pepsinogen. When pepsinogen encounters the acidic environment of the stomach, it is converted into the active form pepsin by the action of hydrochloric acid, which is also secreted by the stomach. The low pH environment of the stomach, typically around pH 2, is necessary for the activity of pepsin because it allows the enzyme to maintain its active conformation and catalyze the hydrolysis of peptide bonds. In a neutral or alkaline environment, the enzyme becomes inactive and is denatured, meaning its structure is disrupted and it is no longer able to function properly. Therefore, pepsin functions normally in a low pH environment and is adapted to the acidic conditions of the stomach.

Learn more about pepsinogen here:

https://brainly.com/question/29462356

#SPJ11

At the end of the reaction, we will have 8.8 mol CO₂, 4 mol H₂, 2 mol H₂, 1 mol CO, 2 mol OH, 0.5 mol O, 4 mol H and 1 mol C.

To solve this problem, we need to balance the chemical equation first:

C₂H₂+ 2.5 O₂ + 2 H₂ + 6 N₂ -> 2 CO₂ + 2 H₂O + 2 H₂ + CO + 2 OH + O + 6 N₂ + C

Next, we need to determine the limiting reactant, which is the reactant that will be completely consumed in the reaction. To do this, we can compare the number of moles of each reactant to the stoichiometric coefficients in the balanced equation.

For C₂H₂: 2 moles C₂H₂ * (2 mol CO₂ / 1 mol C₂H₂) = 4 mol CO₂

For O₂: 1 mol O₂ * (2 mol CO₂ / 2.5 mol O₂) = 0.8 mol CO₂

For H₂: 2 mol H₂ * (2 mol CO₂ / 2 mol H₂) = 2 mol CO₂

For N₂: 6 mol N₂ * (2 mol CO₂ / 6 mol N₂) = 2 mol CO₂

Since O2 produces the least amount of CO₂, it is the limiting reactant.

Using the ideal gas law, we can find the number of moles of each reactant and product at the given conditions:

n = PV/RT

For O₂: n = (2.5 atm * 1 L) / (0.0821 Latm/molK * 300 K) = 0.104 mol

For C₂H₂: n = 2 mol

For H₂: n = 2 mol

For N₂: n = 6 mol

At the end of the reaction, we know that all of the O₂ will be consumed and we will have some amount of each product. We can use the stoichiometric coefficients to determine the number of moles of each product that will be formed:

CO₂: 0.8 mol (from O₂) + 4 mol (from C₂H₂) + 2 mol (from H₂) + 2 mol (from N₂) = 8.8 mol

H₂O: 2 mol (from C₂H₂) + 2 mol (from H₂) = 4 mol

H₂: 2 mol (from H₂) = 2 mol

CO: 1 mol (from C₂H₂) = 1 mol

OH: 2 mol (from O₂) = 2 mol

O: 0.5 mol (from O₂) = 0.5 mol

H: 4 mol (from H₂O) = 4 mol

C: 1 mol (from C₂H₂) = 1 mol

Know more about reaction here:

https://brainly.com/question/17434463

#SPJ11

In this 60 mL solution, there are 2.25 x 10⁻⁴ moles of I- present at equilibrium.

To determine the number of moles of I- present in the solution, we need to use the formula:

moles = concentration x volume

First, we need to convert the given concentration from molarity (M) to moles per liter (mol/L). We can do this by multiplying the given concentration by the conversion factor of 1 liter/1000 mL:

3.75 x 10^-3 M x 1 L/1000 mL = 3.75 x 10^-6 mol/mL

Now we can use the formula to find the number of moles present in the entire solution:

moles = 3.75 x 10^-6 mol/mL x 60 mL = 2.25 x 10^-4 mol

Therefore, there are 2.25 x 10^-4 moles of I- present in the solution with a total volume of 60 mL.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ11

The Let's analyze the reactions you provided and determine if they absorb or release energy. Reaction 1 Leg → Leg + e.
This reaction represents the ionization of lithium, where an electron is removed from the gaseous lithium atom.

The energy needed for this process is given by the ionization energy. For lithium, the ionization energy is 520.2 kJ/mol. Since energy is required to remove the electron, this reaction absorbs energy. Answer for Reaction 1 Absorb, 520.2 kJ/mol. Reaction 2 Leg + e → Leg This reaction is the opposite of Reaction 1 and represents an electron being added to the gaseous lithium atom. The energy change for this process is given by the electron affinity. For lithium, the electron affinity is 59.6 kJ/mol. Since energy is released when the electron is added, this reaction releases energy. Answer for Reaction 2 Release, 59.6 kJ/mol.

learn more about lithium here.

https://brainly.com/question/1439744

#SPJ11

The resulting structure should have a double bond between the second and third carbon atoms in the chain.

The balanced chemical equation for this reaction is:

1-butene + Br2 → 2,3-dibromobutane

The product of the hydrogenation of an alkyne depends on the number of triple bonds present in the molecule.

pent-2-yne + 2H2 → pent-2-ene

The resulting structure refers to the arrangement of atoms or molecules after a chemical reaction has occurred. The resulting structure can be different from the original structure due to the breaking and forming of chemical bonds during the reaction.

The resulting structure can be analyzed using various spectroscopic techniques, such as X-ray crystallography, NMR spectroscopy, and infrared spectroscopy, to determine the positions and types of atoms in the molecule. These techniques provide information about the shape, size, and orientation of the resulting structure. The resulting structure can also have different properties than the original structure, such as reactivity, solubility, and stability. The resulting structure can be used to understand the mechanism of a chemical reaction and to design new molecules with desired properties.

To learn more about Resulting structure visit here:

brainly.com/question/12193515

#SPJ4

The Ksp value for AB is approximately 0.017956 M².

To determine the Ksp (solubility product constant) of the compound AB, we can use the given information about its solubility in a 1.000 M solution of C.

The general equation for the dissolution of a compound AB can be written as follows:

AB(s) ⇌ A+(aq) + B⁻(aq)

The solubility product constant (Ksp) expression for this equilibrium is:

Ksp = [A⁺][B⁻]

In this case, we are given that the solubility of AB in the presence of C is 0.134 M. Let's assume that the concentration of A+ and B⁻ in the equilibrium is also x M.

Using the given information, we can set up the equation:

Ksp = [A+][B⁻] = x × x = x²

We also know that the concentration of C (the compound in the aqueous solution) is 1.000 M.

Now, we need to consider the stoichiometry of the equation. Since AB dissociates into A+ and B⁻, the molar concentration of A+ and B⁻ will be equal to the solubility of AB. Therefore, the concentration of A+ and B⁻ is 0.134 M.

Plugging in the values, we have:

Ksp = (0.134 M) × (0.134 M) = 0.017956 M²

So, the Ksp value for AB is approximately 0.017956 M².

Know more about solubility:

https://brainly.com/question/28170449

#SPJ12

Dyes used in ink can vary depending on the type of printing and the desired color.

Some dyes are used to create a specific hue, such as a bright pink or a deep blue, while others are used to increase the color’s opacity or lightfastness. Some dyes are also used to add a metallic sheen, such as silver or gold.

Pigment dyes are also used to create a matte finish or a more vibrant color. In addition, some dyes are used to create a waterproof finish. Dyes can also be used to increase the ink’s resistance to sun exposure and other environmental conditions.

Finally, some dyes are used to make the ink resist smudging or fading. Each of these dyes can be used in combination to create the desired ink color, opacity, and finish.

Know more about Pigment dyes here

https://brainly.com/question/28743481#

#SPJ11

If the number of hydronium ions in a solution is [tex]3*10^{-2[/tex], the solution is most likely to be acidic in nature.

pH is an indicator of the acidity or the basicity of a solution. The range of pH goes from 0 to 14 on this pH scale. pH ranges from 0 to below 7 is considered acidic and above 7 to 14 is considered to be basic. If the pH of the solution is 7, the solution is considered neutral.

To calculate the pH of the solution, one takes the negative log of the concentration of hydronium ions in the solution. It can be expressed as

pH = - log[[tex]H_3O^+[/tex]]

= - log [tex]3*10^{-2[/tex]

= 1.5

Since the pH is below 7, the solution is considered to be acidic.

Learn more about pH:

https://brainly.com/question/26424076

#SPJ4

Ideal gas law is used to solve this. 62 L  is the volume of 2.3 mol Chlorine  gas at 290 K and 0.89 atm.

Each thing in three dimensions takes up some space. The volume of this area is what is being measured. The space filled within an object's borders in three dimensions is referred to as its volume. It is sometimes referred to as the object's capacity. Finding an object's volume can help us calculate the quantity needed to fill it, such as the volume of water required to refill a bottle, aquarium, or water tank.

PV = nRT

n = 2.3 mol, T = 290 K and P = 0.89 atm.

V = n RT/ P

V = 2.3 mol × 0.082 × 290 /0.89

V = 62 L

To know more about volume, here:

https://brainly.com/question/13338592

#SPJ1

The millimolar solubility of O2 in water at 12°C and 1 atm pressure is 0.347 mM, according to Henry's law.

The solvency of gases in fluids is reliant upon a few factors like temperature, pressure, and the particular gas being broken down. The solvency of oxygen in water at a given temperature and strain can be measured by communicating it as far as its millimolar dissolvability.

At 12 °C and a strain of 1.00 atm, the millimolar solvency of oxygen in water is 0.347 mM. This worth depends on trial information and can be determined utilizing Henry's regulation, which expresses that how much gas broke down in a fluid is corresponding to the fractional tension of the gas over the fluid.

Henry's regulation is communicated numerically as C=k*P, where C is the grouping of the broke up gas, P is the fractional strain of the gas over the fluid, and k is the Henry's regulation steady, which is intended for each gas and dissolvable at a given temperature.

For oxygen in water at 12 °C, the Henry's regulation consistent is 769.2 atm/(mM), and that implies that the convergence of disintegrated oxygen is 769.2 times the fractional strain of oxygen over the fluid. Thusly, at a halfway strain of 1.00 atm, the millimolar solvency of oxygen in water at 12 °C is 0.347 mM.

It is essential to take note of that this worth might change relying upon the particular circumstances, like temperature and strain, and may likewise be affected by different factors like the presence of different solutes in the arrangement.

To learn more about solubility, refer:

https://brainly.com/question/8468536

#SPJ4

Answer:

15.2 +25.3

Explanation:

because it will determine by its weight

The  specific volume of alcohol can be calculated by using the formula V = 1/ρ, where V is the specific volume and ρ is the specific gravity. Thus, the specific volume of alcohol can be calculated as V = 1/0.80 = 1.25.

Specific gravity is a measurement of the density of a substance relative to the density of water. It is a unitless measurement that compares the weight of a substance to an equal volume of water. In contrast, specific volume is a measurement of the volume of a substance per unit of mass or weight. It is the reciprocal of specific gravity and is expressed in units of volume per unit of weight.
Therefore, to calculate the specific volume of alcohol, we use the formula V = 1/ρ, where ρ is the specific gravity of alcohol, which is 0.80. By substituting the value of ρ into the formula, we get V = 1/0.80 = 1.25. This means that the specific volume of alcohol is 1.25 units of volume per unit of weight.

The specific volume of alcohol can be calculated by dividing 1 by its specific gravity of 0.80. The result is 1.25 units of volume per unit of weight.

For more information on specific gravity kindly visit to

https://brainly.com/question/9100428

#SPJ11

A mass of 12.5 grams of [tex]Na_2S_2O_3[/tex] is needed to dissolve 4.7 g of AgBr in a solution volume of 1 L.

The balanced equation for the dissolution of AgBr is:

AgBr (s) ↔ [tex]Ag^+[/tex] (aq) + [tex]Br^-[/tex] (aq)

The solubility product expression for AgBr is:

Ksp =[tex][Ag^+][Br^-][/tex]= 3.3 x [tex]10^{-13}[/tex]

The reaction between [tex]Ag^+[/tex] and [tex]S_2O_3^{2-}[/tex] is:

[tex]Ag^+[/tex] (aq) + 2 [tex]S_2O_3^{2-}[/tex] (aq) ↔ [tex][Ag(S_2O_3)_2]^{3-}[/tex] (aq)

The reaction quotient for [tex][Ag(S_2O_3)_2]^{3-}[/tex] is:

Kq = [[tex]Ag^+[/tex]][tex][S_2O_3^{2-}]^2[/tex] / [tex][Ag(S_2O_3)_2]^{3-}[/tex] = 4.7 x [tex]10^{13}[/tex]

We can use the solubility product expression to find the concentration of [tex]Ag^+[/tex] in the solution:

[[tex]Ag^+[/tex]] = Ksp / [tex][Br^-][/tex] = 3.3 x [tex]10^{-13}[/tex] / (4.7 g / 187.77 g/mol / 1 L) = 1.64 x [tex]10^{-10}[/tex]M

We can then use the reaction quotient to find the concentration of [tex]S_2O_3^{2-}[/tex] in the solution:

[tex][S_2O_3^{2-}][/tex] = √(Kq [tex][Ag(S_2O_3)_2]^{3-}[/tex] / [tex][Ag^+][/tex]) = √(4.7 x [tex]10^{13}[/tex] / 1.64 x [tex]10^{-10}[/tex]) / 2 = 7.9 x [tex]10^{-2}[/tex] M

Finally, we can use the concentration of [tex]S_2O_3^{2-}[/tex] to find the mass of [tex]Na_2S_2O_3[/tex] needed to dissolve the AgBr:

mass = concentration x volume x molar mass = 7.9 x [tex]10^{-2}[/tex] M x 1 L x 158.11 g/mol = 12.5 g

Learn more about the mass at

https://brainly.com/question/508865

#SPJ4

The trend of low spin versus high spin for transition metal ions in coordination complexes is primarily determined by two factors: the crystal field splitting energy (Δ) and the pairing energy (P).

In a coordination complex, a transition metal ion is surrounded by ligands, which creates an electric field that influences the d-orbital energy levels of the metal ion. This splitting of d-orbital energy levels is known as crystal field splitting. The energy difference between the higher and lower energy d-orbitals is called crystal field splitting energy (Δ).
Low spin complexes have electrons preferentially paired in the lower energy d-orbitals, resulting in fewer unpaired electrons. High spin complexes have electrons distributed more evenly across both the lower and higher energy d-orbitals, leading to more unpaired electrons.

The trend of low spin versus high spin depends on the relative values of Δ and P:
1. If Δ > P, the complex will prefer a low spin configuration because it is energetically more favorable to pair electrons in the lower energy d-orbitals rather than promoting them to higher energy d-orbitals.
2. If Δ < P, the complex will prefer a high spin configuration, as promoting electrons to the higher energy d-orbitals is less energetically costly than pairing them in the lower energy d-orbitals.

Factors affecting the trend include the type of metal ion, the oxidation state of the metal, and the nature of the ligands. Strong field ligands, like CN-, CO, and NH3, generally lead to larger Δ values and low spin complexes, whereas weak field ligands, like Cl-, Br-, and I-, lead to smaller Δ values and high spin complexes.

To know more about coordination complexes, click here

https://brainly.com/question/28561372

#SPJ11

The resulting percentage strength (v/v) of the solution is 5%.

The percentage strength (v/v) of the resulting solution can be calculated as follows:

First, calculate the amount of the solute (in mL) in the original 500 mL solution:

15% v/v = 15 mL of solute per 100 mL of solution

Amount of solute in 500 mL = (15 mL/100 mL) x 500 mL = 75 mL

Next, calculate the new concentration of the solute in the 1500 mL solution:

Total volume of the resulting solution = 1500 mL

Volume of the solute in the resulting solution = 75 mL

Percentage strength (v/v) = (Volume of the solute/Total volume of the solution) x 100%

Percentage strength (v/v) = (75 mL/1500 mL) x 100% = 5% v/v

To know more about amount of the solute, refer here:
https://brainly.com/question/10343184#
#SPJ11

Answer:

The increasing concentration of carbon dioxide in the atmosphere leads to ocean acidification by increasing the concentration of hydrogen ions in seawater, which lowers the pH and reduces the concentration of carbonate ions. This can have significant consequences for the survival and growth of marine organisms, which can ultimately impact the entire marine food web.

Explanation: