Which of the following metals has a low melting point?
2 A. Rubidium
B. Potassium
C. Calcium
D. Sodium​

Answer:

3 fluorine atoms will be present

Answer:

3

Explanation:

The chemical formula of aluminum fluoride is AlF3. As you can see, there is a 1:3 ratio of aluminum atoms to fluorine atoms. Therefore, if a molecule of AlF3 has one aluminum atom, you know there must be 3 fluorine atoms present.

If you want further tutoring help in chemistry or other subjects for FREE, check out growthinyouth.org.

Answer:

1. Lewis acid: F. Fe₃⁺, Lewis base: B. CN⁻

2. Lewis acid: A. AlCl₃, Lewis base: D. Cl⁻

3. Lewis acid: C. AlBr₃, Lewis base: E. NH₃

Hope this helps.

The Lewis acid is chemical substance which possesses an empty orbital and accepts an electron pair from a Lewis base ( donor ), in order to create a Lewis adduct ( molecule created from the bonding of Lewis base and acid ).

The Lewis acid from reaction 1 is Fe₃⁺ while the Lewis base is CN⁻ also the Lewis acid from reaction 2 is AICI₃ while the Lewis base is CI⁻

Hence we can conclude that the Lewis acids and Lewis bases of the reactions in the question are as listed above.

Learn more: https://brainly.com/question/16108775

Answer:

2NaOH(s) → Na₂O(s) + H₂O(g)

Hope that helps.

Answer:

Ksp = 2.06x10⁻¹⁰

Explanation:

For AB₂. solubility product constant, Ksp, is written as follows:

AB₂(s) ⇄ A²⁺ + 2Br⁻

Ksp = [A²⁺] [Br⁻]²

Molar solubility represents how many moles of AB₂ are soluble per liter of solution. and is obtained from Ksp:

AB₂(s) ⇄ A²⁺ + 2Br⁻

AB₂(s) ⇄ X + 2X

where X are moles that are soluble (Molar solubility)

Ksp = [X] [2X]²

As molar solubility of the salt is 3.72x10⁻⁴M:

Ksp = 4X³

Ksp = 4(3.72x10⁻⁴)³

Answer:

Lewis acid

Explanation:

In chemistry, a Lewis acid is any chemical specie that accepts a lone pair of electrons while a Lewis base is any chemical specie that donates a lone pair of electrons.

If we look at the formation of PF6^-, the process is as follows;

PF5 + F^- -----> PF6^-

We can see that PF5 accepted a lone pair of electrons from F^- making PF5 a lewis acid according to our definition above.

Hence in the formation of PF6^-, PF5 acts a Lewis acid.

Answer:

T2 = 500K

Explanation:

Given data:

P1 = 1atm

V1 = 300ml

T1= 27 + 273 = 300K

T2 = ?

V2 = 1.00ml

P2 = 500atm

Apply combined law:

P1xV1//T1 = P2xV2/T2 ...eq1

Substituting values into eq1:

1 x 300/300 = 500 x 1/T2

Solve for T2:

300T2 = 500 x 300

300T2 = 150000

Divide both sides by the coefficient of T2:

300T2/300 = 150000/300

T2 = 500K

Answer:

The Lewis structure is attached with the answer -

Explanation:

Lewis structure or Lewis dot diagram are diagrams or representation of showing the bonding between different or same atoms of a molecule in any and also shows lone pairs of electrons that may exist in the molecule as dots.

HBrO₄ is bromine oxoacid which is also known as perbromic acid. It is a unstable inorganic compound.

The Lewis structure is attached in form of image with representation of lone pairs of electrons.

Answer:

BaCl2

Explanation:

Barium = Ba

Chloride => Cl-

Chemical Equation:

Ba + Cl => BaCl2

Note:

The valency of barium is 2 and valency of chloride is 1 (i.e. chlorine). The formula formed by the combination of these elements is BaCl2 (there's exchange of valencies when these two elements combine).

Answer:

DE2

Explanation: for every one D+2 you need two E-1 because +2=-2

Answer:

A) Chlorine (Cl)

B) Cobalt (Co)

C) Caesium (Cs)

Hope this helps.

The abbreviated electron configurations that was given in the question belongs to

Chlorine (Cl)

Cobalt (Co)

Caesium (Cs) respectively.

Therefore, electron configurations  explain orbitals of an atom when it is in it's ground state.

Learn more at:https://brainly.com/question/21940070?referrer=searchResults

Answer:

This description shows a methyl group.

Explanation:

Answer:

- Pressure in St. Paul, Minnesota

- Temperature in St. Paul, Minnesota

Explanation:

22.4 L or dm³ is the volume for a gas under Standard pressure and temperature conditions.

It is logically to say, that tempereature value at the day of the experiment was not 273.15 K, which is 32°F

We can say, that the pressure was not 1 atm. St Paul Minnesota has  a minimum, but a little height, so the pressure differs by few figures from the standard pressure values.

We also have to mention, that 22.4 L is the value for the Ideal gases at standards conditions. Ideal gases does not exisist on practice, we always talk about real gases. Don't forget the Ideal Gases Law equation:

P . V = n . R . T

Pressure . Volume = number of moles . 0.082 L.atm /mol. K  . 273.15K

Number of moles must be 1 at STP, to determine a volume of 22.4L

Answer:

[tex]\boxed{\text{Q1. 3.6 g; Q2. 0.2 A}}[/tex]

Explanation:

Q1. Mass of Cu

(a) Write the equation for the half-reaction.

Cu²⁺ + 2e⁻ ⟶ Cu

The number of electrons transferred (z) is 2 mol per mole of Cu.

(b) Calculate the number of coulombs

q  = It  

[tex]\text{t} = \text{1.0 h} \times \dfrac{\text{3600 s}}{\text{1 h}} = \text{3600 s}\\\\q = \text{3 C/s} \times \text{ 3600 s} = \textbf{10 800 C}[/tex]

(c) Mass of Cu

We can summarize Faraday's laws of electrolysis as

[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\& = &\dfrac{10 800 \times 63.55}{2 \times 96 485}\\\\& = & \textbf{3.6 g}\\\end{array}\\\text{The mass of Cu produced is $\boxed{\textbf{3.6 g}}$}[/tex]

Note: The answer can have only two significant figures because that is all you gave for the time.

Q2. Current used

(a) Write the equation for the half-reaction.

Ag⁺ + e⁻ ⟶ Ag

The number of electrons transferred (z) is 1 mol per mole of Ag.  

(a) Calculate q

[tex]\begin{array}{rcl}m &=& \dfrac{qM}{zF}\\\\2.00& = &\dfrac{q \times 107.87}{1 \times 96 485}\\\\q &=& \dfrac{2.00 \times 96485}{107.87}\\\\& = & \textbf{1789 C}\\\end{array}[/tex]

(b) Calculate the current

t = 3 h = 3 × 3600 s = 10 800 s

[tex]\begin{array}{rcl}q&=& It\\1789 & = & I \times 10800\\I & = & \dfrac{1789}{10800}\\\\& = & \textbf{0.2 A}\\\end{array}\\\text{The current used was $\large \boxed{\textbf{0.2 A}}$}[/tex]

Note: The answer can have only one significant figure because that is all you gave for the time.

Answer:

V2 = 17371.43ml

Explanation:

We use Boyles laws

since temperature is constant

P1V1=P2V2

760 x 400 = 17.5 x V2

304000 = 17.5 x V2

V2 = 304000/17.5

V2 = 17371.43ml

The volume will the dry hydrogen gas occupy at the temperature of 20°C and vapor pressure at  760 torrs will be 18 ml.

What is vapor pressure?

The vapor pressure of a liquid is independent of the volume of liquid in the container, whether one liter or thirty liters; both samples will have the same vapor pressure at the same temperature.

The temperature has an exponential connection with vapor pressure, which means that as the temperature rises, the vapor pressure rises as well the equation is -

P1 V1 / T1 = P2 V2 / T1

here, P = pressure

       T = temperature

        V = volume

substituting the value in the equation,

400 ×760 / 20 = 17.5× V / 20

V = 400× 760 / 20 × 17.5 / 20

V = 18 ml

Therefore the volume of the hydrogen gas remaining at this temperature will be 18 ml.

learn more about vapor pressure, here :

https://brainly.com/question/27682495

#SPJ5

Answer:

1,4-hexanediamine contains two [tex]-NH_{2}[/tex] functional groups.

Explanation:

1,4-hexanediamine is an organic molecule which contains two [tex]-NH_{2}[/tex] functional groups at C-1 and C-4 position.

The longest carbon chain in 1,4-hexanediamine contains six carbon atoms.

Molecular formula of 1,4-hexanediamine is [tex]C_{6}H_{16}N_{2}[/tex].

1,4-hexanediamine used as a bidentate ligand in organometallic chemistry.

The structure of 1,4-hexanediamine is shown below.

Answer:

I think its B

Explanation:

Precipitation reactions leave a solid behind. The solid is called a precipitate.

Answer:

B

Explanation:

An insoluble solid will form when ions in dissolved compounds switch places.

Explanation:

This reaction is in equilibrium and would hence obey lechatelier's principle. This principle states that whenever a system at equilibrium undergoes a change, it would react in way so as to annul that change.

Since it is an endothermic reaction, increasing the temperature would cause the reaction to shift towards the right.

This means that it favours product formation and more of the product would be formed.

Answer:

Molar mass of the gas is 0.0961 g/mol

Explanation:

The effusion rate of an unknown gas = 11.1 min

rate of [tex]H_{2}[/tex] effusion = 2.42 min

molar mass of hydrogen = 1 x 2 = 2 g/m

molar mas of unknown gas = ?

From Graham's law of diffusion and effusion, the rate of effusion and diffusion is inversely proportional to the square root of its molar mass.

from

[tex]\frac{R_{g} }{R_{h} }[/tex] = [tex]\sqrt{\frac{M_{h} }{M_{g} } }[/tex]

where

[tex]R_{h}[/tex] = rate of effusion of hydrogen gas

[tex]R_{g}[/tex] = rate of effusion of unknown gas

[tex]M_{h}[/tex] = molar mass of H2 gas

[tex]M_{g}[/tex] = molar mass of unknown gas

substituting values, we have

[tex]\frac{11.1 }{2.42 }[/tex] = [tex]\sqrt{\frac{2 }{M_{g} } }[/tex]

4.587 = [tex]\sqrt{\frac{2 }{M_{g} } }[/tex]

[tex]\sqrt{M_{g} }[/tex] = [tex]\sqrt{2}[/tex]/4.587

[tex]\sqrt{M_{g} }[/tex] = 0.31

[tex]M_{g}[/tex] = [tex]0.31^{2}[/tex] = 0.0961 g/mol

The molar mass of the unknown gas will be "0.0961 g/mol".

Given:

Effusion rate of unknown gas,

Effusion rate of [tex]H_2[/tex],

Molar mass of hydrogen,

              [tex]= 2 \ g/m[/tex]

According to the Graham's law, we get

→    [tex]\frac{R_g}{R_h} = \sqrt{\frac{M_h}{M_g} }[/tex]

By substituting the values, we get

→   [tex]\frac{11.1}{2.42} = \sqrt{\frac{2}{M_g} }[/tex]

→ [tex]4.587=\sqrt{\frac{2}{M_g} }[/tex]

→ [tex]\sqrt{M_g} = \sqrt{\frac{2}{4.587} }[/tex]

   [tex]\sqrt{M_g} = 0.31[/tex]

       [tex]M_g = 0.0961 \ g/mol[/tex]

Thus the above solution is right.          

Learn more:

https://brainly.com/question/6019799

Answer: The Clean Air Act was important because it emphasized cost-effective methods to protect the air; encouraged people to study the effects of dirty air on human health; and created a regulation that makes any activities that pollute the air illegal.

Explanation:

Answer:

Clean Air Act (CAA), U.S. federal law, passed in 1970 and later amended, to prevent air pollution and thereby protect the ozone layer and promote public health. The Clean Air Act (CAA) gave the federal Environmental Protection Agency (EPA) the power it needed to take effective action to fight environmental pollution.

Answer and Explanation:

Given the following chemical equation:

Cl₂(g) + F₂(g) ⇒ 2ClF(g)

The coefficients are: 1 for Cl₂, 1 for F₂ and 2 for ClF. The coefficients indicate the number of units of each ompound that participates in the reaction. It gives the proportion of reactants and products in the reaction. These units can be molecules or moles. In this reaction, we can say:

On the particulate level: 1 molecule of Cl₂(g) reacts with 1 molecule of F₂(g) to form 2 molecules of ClF(g).

On the molar level: 1 mol of Cl₂(g) reacts with 1 mol of F₂(g) to form 2 mol of ClF(g).

Answer:

El volumen del gas era 12.95 L

Explanation:

Se relaciona la presión y el volumen mediante la ley de Boyle, que dice:

“El volumen ocupado por una determinada masa gaseosa a temperatura constante, es inversamente proporcional a la presión”

La ley de Boyle se expresa matemáticamente como:  P*V=k

Por otro lado, la Ley de Charles consiste en la relación que existe entre el volumen y la temperatura absoluta de una cierta cantidad de gas ideal, el cual se mantiene a una presión constante. Esta ley dice que cuando la cantidad de gas y de presión se mantienen constantes, el cociente que existe entre el volumen y la temperatura siempre tendrán el mismo valor:  

[tex]\frac{V}{T}=k[/tex]

Por último, la Ley de Gay Lussac dice que la temperatura absoluta y la presión son directamente proporcionales. Es decir, cuando se mantiene todo lo demás constante, mientras suba la temperatura de un gas subirá también su presión. Y mientras la temperatura del gas baje, lo mismo ocurrirá con la presión:

[tex]\frac{P}{T}=k[/tex]

Combinado las mencionadas tres leyes se obtiene:

[tex]\frac{P*V}{T} =k[/tex]

Cuando se desean estudiar dos diferentes estados, uno inicial y una final de un gas, se puede aplicar:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

Recordando que la temperatura debe usarse en grados Kelvin, conoces los siguientes datos:

Reemplazando:

[tex]\frac{750 torr*8.5 L}{293K} =\frac{425 torr*V2}{253 K}[/tex]

Resolviendo:

[tex]V2=\frac{750 torr*8.5 L}{293K} *\frac{253 K}{425 torr}[/tex]

V2= 12.95 L

El volumen del gas era 12.95 L

Answer:

The process of slowly adding one solution to another until the reaction between the two is complete.

Explanation:

When you perform a titration, you are slowly adding one solution of a known concentration called a titrant to a known volume of another solution of an unknown concentration until the reaction reaches neutralization, in which the reaction is no longer taking place. This is often indicated by a color change.

Hope that helps.

Answer:

c iodine

Explanation:

fluorine is a halogen group element like Bromine, Iodine,Astatine,Chloride

Answer:

3.00 L

Explanation:

Convert the pressure to Pascals.

P = 82 atm × (101325 Pa/atm)

P = 8,308,650 Pa

Convert temperature to Kelvins.

T = 27°C + 273

T = 300 K

Use ideal gas law:

PV = nRT

(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)

V = 0.00300 m³

If desired, convert to liters.

V = (0.00300 m³) (1000 L/m³)

V = 3.00 L

Answer:

[tex]\large \boxed{\text{3.0 L}}[/tex]

Explanation:

[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]

Answer:

Kc = [H₂CO₃] / [CO₂]

Explanation:

Equilibrium constant expression (Kc) of any reaction is defined as the ratio between molar concentrations in equilibrium of products over reactants.

Pure solids and liquids don't affect the equilibrium and you don't have to take its concentrations in the equilibrium.

Also, each specie must be powered to its reactant coefficient.

For example, for the reaction:

aA(s) + bB(aq) ⇄ cC(l) + nD(g) + xE(aq)

The equilibrium constant, kc is:

Kc = [D]ⁿ / [B]ᵇ[E]ˣ

You don't take A nor C species because are pure solids and liquids. b, n and x are the reactant coefficients of each substance. Ratio of products over reactants

Thus, for the reaction:

CO₂(aq) + H₂O(l) ⇄ H₂CO₃(aq)

The Kc is:

Answer:

A. Electron clouds or energy levels

Explanation:

Electrons can exist in two states:

Electrons can exist in an electron cloud or energy level. Electron in an atoms have ability to change energy levels either by emitting or absorbing a photon that form the energy equal to the energy difference between the two levels.

Hence, the correct answer is A.

Answer:

Up and DOWN spin

Explanation:

Answer:

Ethane would have a higher boiling point.

Explanation:

In this case, for the lewis structures, we have to keep in mind that all atoms must have 8 electrons (except hydrogen). Additionally, each carbon would have 4 valence electrons, with this in mind, for methane we have to put the hydrogens around the carbon, and with this structure, we will have 8 electrons for the carbon. In ethane, we will have a bond between the carbons, therefore we have to put three hydrogens around each carbon to obtain 8 electrons for each carbon.

Now, the main difference between methane and ethane is an additional carbon. In ethane, we have an additional carbon, therefore due to this additional carbon, we will have more area of interaction for ethane. If we have more area of interaction we have to give more energy to the molecule to convert from liquid to gas, so, the ethane will have a higher boiling point.

I hope it helps!

The Lewis structure shows the valence electrons in a molecule. Ethane will have a higher boiling point than methane.

We can deduce the number of valence electrons in a molecule by drawing the Lewis structure of the molecule. The Lewis structure consists of the symbols of elements in the compound and the valence electrons in the compound.

We know that the higher the molar mass of a compound the greater its boiling point. Looking at the Lewis structures of methane and ethane, we cam see that ethane has a higher molecular mass (more atoms) and consequently a higher boiling point than methane.

Learn more: https://brainly.com/question/2510654

Answer:

An alkyl halide can undergo SN2 reaction with an amine

Explanation:

The displacement of a bromine atom by an an amine (step 2---> 3) in the reaction sequence is an example of an SN2 reaction in which the amine is the nucleophile.

The nitrogen atom of the amine which bears a lone pair of electrons functions as the nucleophile and attacks the electrophilic carbon atom of the alkyl halide displacing the bromide and creating a new Carbon-Nitrogen bond. An ammonium intermediate is immediately formed and the reaction is completed by the abstraction of a hydrogen by a base (such as excess amine present in the system).

This reaction is slower with t-BuNH2 because of steric hindrance and steric crowding in the transition state. SN2 reactions are faster with methylamine where the alkyl carbon is easily accessible.

The detailed mechanism of this reaction has been attached to this answer.

Answer:

Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰

Explanation:

Before proceeding to write out the electron configuration of Cd2+, we have to obtain the electron configuration of Cadmium (Cd),

Cadmium has an atomic number of 48, this means that a neutral cadmium atom will have a total of  48  electrons surrounding its nucleus.

The electronic configuration of Cadmium is;

Cd: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10

The shorthand notation is given as;

Cd: [Kr] 4d¹⁰5s²

Cd2+ means that it has two less electrons, hence it's electron configuration is given as;

Cd2+ : 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 4d10 or [Kr] 4d¹⁰