Which of the following phase changes describes what is
happening in the following endothermic process?
H20 (1) + heat --> H2O (g)
O melting
o freezing
o boiling
O condensing

Answer:

35.7 A

Explanation:

Let's consider the reduction half-reaction of Al³⁺.

Al³⁺ + 3 e⁻ ⇒ Al

We will calculate the charge required to produce 18.0 g of Al using the following conversion factors.

[tex]18.0gAl \times \frac{1molAl}{27.0gAl} \times \frac{3mole^{-} }{1molAl} \times \frac{96486C}{1mole^{-} } = 1.93 \times 10^{5} C[/tex]

1.93 × 10⁵ C circulate in 1.50 hours. The intensity is:

[tex]I = \frac{1.93 \times 10^{5} C}{1.50h} \times \frac{1h}{3600s} = 35.7 A[/tex]

Answer:

Molecule

Explanation:

when two or more than two non-metal elements are combined then it form Molecule.

Answer:

Gamma rays and X-rays

Explanation:

All the things she said

All the things she said

Running through my head

Running through my head

Running through my head

All the things she said

All the things she said

Running through my head

Running through my head

All the things she said

This is not enough

This is not enough

the pH numbers that are acidic above is 3 and 5

Answer:

d

Explanation:

from you know the atomic number it should be easy to find

To determine the molar mass of an element, one must know the element's atomic number​. Therefore, option D is correct.

An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.

Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.

The atomic mass of any element on the periodic table can be used to calculate its molar mass.

Thus, option D is correct.

To learn more about an atomic number, follow the link;

https://brainly.com/question/16858932

#SPJ6

Answer:

chung long

Explanation:

cause 3 plus 2 =9

Explanation:

222.01758 g/mol

3.1Computed Properties

Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.

Explanation:

Not My WORK!  I got this info from another site.  BUT I HOPE IT HELPS :)

Answer:

[tex]\boxed {\boxed {\sf 19 \ M}}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter, so the formula is:

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]

This solution has 9.0 moles of solute and 462 milliliters of solution. We must convert milliliters to liters. Remember that 1 liter contains 1000 milliliters.

Create a ratio.

Multiply by the value we are converting: 462 milliliters

[tex]0.462 \ L[/tex]

Now we know both values and we can solve for the molarity.

[tex]molarity= \frac{9.0 \ mol}{ 0.462 \ L}[/tex]

Divide.

[tex]molarity= 19.4805195 \ mol/L[/tex]

The original measurements of moles and milliliters have 2 and 3 significant figures respectively. We have to round our answer to the least number of sig figs, which is 2 in this case.

For the number we found, that is the ones place. The 4 in the tenths place (19.4805195) tells us to leave the 9 in the ones place.

[tex]molarity= 19 \ mol/L[/tex]

1 mole per liter is equal to 1 molar or M, so our answer is equal to 19 M.

[tex]molarity \approx 19 \ M[/tex]

The molarity of the solution is approximately 19 M.

Answer:

An increase in temperature typically increases the rate of reaction because an increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision.Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction.

Explanation:

Can you please give this answer a brainliest answer please

Answer:

D. the capacity to do work

Explanation:

the basic definition of energy is the ability to do work

Answer:

F G there you go the guy on top is right

Explanation:

F G

Answer:

Step 1;

q = w = -0.52571 kJ, ΔS = 0.876 J/K

Step 2

q = 0, w = ΔU = -7.5 kJ, ΔH = -5.00574 kJ

Explanation:

The given parameters are;

[tex]P_i[/tex] = 100 N·m

[tex]T_i[/tex] = 327 K

[tex]P_f[/tex] = 90 N·m

Step 1

For isothermal expansion, we have;

ΔU = ΔH = 0

w = n·R·T·ln([tex]P_f[/tex]/[tex]P_i[/tex]) = 1 × 8.314 × 600.15 × ln(90/100) = -525.71

w ≈ -0.52571 kJ

At state 1, q = w = -0.52571 kJ

ΔS = -n·R·ln([tex]P_f[/tex]/[tex]P_i[/tex]) = -1 × 8.314 × ln(90/100) ≈ 0.876

ΔS ≈ 0.876 J/K

Step 2

q = 0 for adiabatic process

ΔU = 25×(27 - 327) = -7,500

w = ΔU = -7.5 kJ

ΔH = ΔU + n·R·ΔT

ΔH = -7,500 + 8.3142 × 300 = -5,005.74

ΔH = ΔU = -5.00574 kJ

Answer:

crust

Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.

Explanation:

Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.

Answer:

pOH = 11

Explanation:

The pH is an unit of concentration widely used in chemistry to find the quality of a solution.

To solve this question we must, as first, find the [H+] using the pH:

[H+] = 10^-pH

[H+] = 10^-3

Now, using kw:

kw = 1.0x10-14 = [H+] [OH-]

1.0x10-14 = [10^-3] [OH-]

[OH-] = 1.0x10-11

pOH = -log [OH-]

Answer:

A

Explanation:

Rock sand sun arent living.  cactus lizard sam and snake are living or biotic

2 F atoms

Explanation:

A Ca atom has a valence number of +2, which means that when ionized, it will give up two electrons. In turn, a F atom has a valence number of -1, which means it can only accept 1 electron when ionized. So to accommodate the two electrons from Ca atom, we need 2 F atoms.

Answer:

mixture of four compounds

mixture of two elements and two compounds

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 2. \ 157 \ kPa}}[/tex]

Explanation:

Since temperature remains constant, the only variables that change are volume and pressure. Therefore, we are using Boyle's Law. This states that the pressure is inversely proportional to the volume. The formula is:

[tex]P_1V_1=P_2V_2[/tex]

We know the gas starts with a volume of 20.0 liters at a pressure of 275 kPa. We can substitute these values into the left side of the formula.

[tex]275 \ kPa *20.0 \ L=P_2V_2[/tex]

We know the gas expands to a volume of 35.0 Liters, but we do not know the pressure.

[tex]275 \ kPa *20.0 \ L=P_2* 35.0 \ L[/tex]

Since we are solving for the new pressure, we must isolate the variable P₂. It is being multiplied by 35.0 Liters and the inverse of multiplication is division. Divide both sides by 35.0 L.

[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}= \frac{P_2*35.0 \ L}{35.0 \ L}[/tex]

[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}=P_2[/tex]

The units of liters cancel.

[tex]\frac {275 \ kPa * 20.0 }{ 35.0 }=P_2[/tex]

[tex]\frac {5500}{35.0} \ kPa= P_2[/tex]

[tex]157.142857 \ kPa=P_2[/tex]

The original measurements of pressure and volume have 3 significant figures, so our answer must have the same. For the number we calculated, that is the ones place.

The 1 in the tenths place (157.142857) tells us to leave the 7 in the ones place.

[tex]157 \ kPa= P_2[/tex]

If the gas expanded to a volume of 35.0 liters while the temperature remained constant, the pressure in container was approximately 157 kilopascals.

Answer:

püvinlbxyfsswgrxzvnnchcyv nkivtcdg

Answer:

Br

Explanation:

Answer: do you have the answer for this yet ?

Explanation:

I’m stuck on the same question as well.

What is genetic modification (GM) of crops and how is it done? GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.

Answer:

GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants. The seeds produced by these plants will inherit the new DNA.

Answer:

The molar mass and molecular weight of CCI2F2 is 315.8271.

Explanation:

Answer:

1618.2

Explanation:

235+75=310×75=1618.2

Answer:

a bacterium with a rigid spiral structure,found in stagnant water and something causing disease

Answer:

Molality of solution=10.11 m

Explanation:

We are given that

Given mass of KCl(WB)=75.3 g

Given mass of water (WA)=100 g=100/1000=0.1 kg

1 kg=1000 g

Molar mass of H=1.01 g

Molar mass of K=39g

Molar mass of Cl=35.45 g

We have to find the molality of a solution.

Molar mass of KCl(MB)=39+35.45

Molar mass of KCl(MB) =74.45 g

Number of moles of solute (KCl)=[tex]\frac{given\;mass}{molar\;mass}=\frac{W_B}{M_B}[/tex]

Number of moles of solute (KCl)=[tex]\frac{75.3}{74.45}[/tex]

Number of moles of solute (KCl)=1.011 moles

Molality of solution

=[tex]\frac{number\;of\;moles\;of\;solute}{mass\;of\;solvent}[/tex]

Using the formula

Molality of solution=[tex]\frac{1.011}{0.1}[/tex]

Molality of solution=10.11 m