Answer:
definite volume
Explanation:
Both solids and liquids have a definite volume: The difference is that solids have definite shape while liquids do not -liquids take the shape of their containers-.
Having a definite volume is why liquids cannot be compressed, a property that is used in hydraulic systems.
please help. im freaking out rn. i have like 40 missing assignments please
Answer:
I'm pretty sure its the one that says very little at the beginning but if I get it wrong I'm sorry
How many grams of sulfur must be burned to give 100.0 g of So2
Answer:
50 g of S are needed
Explanation:
To star this, we begin from the reaction:
S(s) + O₂ (g) → SO₂ (g)
If we burn 1 mol of sulfur with 1 mol of oxygen, we can produce 1 mol of sulfur dioxide. In conclussion, ratio is 1:1.
According to stoichiometry, we can determine the moles of sulfur dioxide produced.
100 g. 1mol / 64.06g = 1.56 moles
This 1.56 moles were orginated by the same amount of S, according to stoichiometry.
Let's convert the moles to mass
1.56 mol . 32.06g / mol = 50 g
Designer Andrea Tyson, a conservation planner from Naples, Florida, calls Arendt’s approach "capitalism mated with conservation." Explain why you think she would use this term.
Answer:
It uses this term to represent the economic use of land and nature, with minimal degradation and maximum environmental preservation.
Explanation:
Capitalism is an economic system that promotes the maximum economic exploitation of terrestrial resources. It is common for this exploitation to be strongly associated with environmental degradation, destruction of natural habitats, deforestation and death of fauna and flora. With this, we can consider that capitalism is one of the main formulators of environmental degradation, however many professionals have considered the term "capitalism mated with conservation," where terrestrial resources are exploited consciously and with the objective of reducing degradation to the maximum. environmental impact and maximize conservation.
A beaker in your laboratory drawer has an inside diameter of 6.8 cm and a height of 8.9 cm. Using the equation V= arh, calculate the volume of the beaker, expressed in milliliters.
Answer:
323.22 ml
Explanation:
Given that :
Diameter, d = 6.8cm
Height, h = 8.9cm
V = arh
Recall :
Volume, V = πr²h
Radius, r = diameter / 2 = 6.8 / 2 = 3.4cm
V = π * 3.4^2 * 8.9
V = 323.21961 cm³
Recall:
1ml = 1cm³
Hence,
323.21961 cm³ = 323.21961 ml
Volume = 323.22 ml
number of balance electrons of a non ionized oxygen atom
Which of the following metals (M) will form an ionic compound with nitrogen with the general formula M3N2?
Answer:
There are no options provided dude,
But i guess the answer will be a metal with valency 2 for sure as the subscript given for N in 'M3N2' is 2 so the valency of the metal u need to select will be 2 for sure
It can be magnesium or some other if the provided options in real question has Mg then its the answer
Please explain to me!!!
Answer:
nice handwrtting
Explanation:
Calculate the kinetic energy of an electron ejected from a piece of sodium (Φ = 4.41x10–19 J) that is illuminated with 265 nm light.
in Joules
Answer:
Explanation:
Energy of falling radiation having wavelength of 265 nm
= h c / λ where h is plank's constant , c is velocity of light and λ is wavelength of radiation . Putting the values
Energy of light photon = 6.6 x 10⁻³⁴ x 3 x 10⁸ / 265 x 10⁻⁹
= .0747 x 10⁻¹⁷
= 7.47 x 10⁻¹⁹ J .
Work function of sodium is 4.41 x 10⁻¹⁹
So kinetic energy of ejected electron = energy of falling photon - work function
= 7.47 x 10⁻¹⁹ - 4.41 x 10⁻¹⁹
= 3.06 x 10⁻¹⁹ eV .
What is the molecular formula of the molecule that has an empirical formula of C2H40 and a molar mass of 176.21 g/mol?
Type your answer using the following format:
CuCl2 for CuCl2.
Answer:
C8H16O4
Explanation:
C2H4O= 24+4+16
44
n=molar mass/empirical formula
n=176.21/44
=4
Therefore
Molar Formula= (C2H4O)4=C8H16O4
If two reactant molecules collide with each other what two reasons might they not combine ?
What is the ratio
amount (mol) Fatoms
amount (mol) Xe atoms
Enter your answer as an integer.
Pls help
Answer:
Empirical formula
Explanation:
The empirical formula of a compound is the simplest whole number ratio of atoms of each element in the compound. It is determined using data from experiments and therefore empirical.
In which state of matter are the particles at rest (not moving at all)?
none of these
solid
liquid
gas
Answer:
Solids for sure
particles of solid cant flow.
Answer:
B)Solids
Solids have tightly packed particles unlike liquids and gases whose particles can move freely but rate of movement is highest in gas while compared to water
Vitamin C is a covalent compound with the molecular
formula C6H8O6. The recommended daily dietary
allowance of vitamin C for children aged 4-8 years is
0.000142mol. What is the mass of this allowance in grams?
The mass allowance of Vitamin C for children aged 4-8 years is equal to 0.025 grams.
What is a mole?A mole can be defined as a standard unit that can be utilized to evaluate the number of entities such as atoms, molecules, ions, or other particular particles in a particular amount of the substance.
The number of elementary entities present in one mole of any chemical substance was found to be equal to 6.023 × 10²³ which is also known as the Avogadro number.
Given, the number of moles of vitamin C = 0.000142 moles
Given, the molecular formula of Vitamin C is C₆H₈O₆.
The mass of one mole of C₆H₈O₆ = 176 g
One mole of Vitamin C has mass = 176 g
0.000142 mol of Vitamin C has mass = 0.000142×176 = 0.025 g
Therefore, the mass of 0.000142 mol of Vitamin C is 0.025 g.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
la densidad de un aceite liviano para vehiculo es 0.87g/cm3 calcules su volumen especifico y peso especifico
Answer:
Pe = 8700 N/m³
Vesp = 1,15 cm³/g
Explanation:
Ya que conocemos el valor de la densidad de este aceite, es muy sencillo calcular tanto volumen como peso específico.
En el caso de volumen específico, esta se refiere al cociente del volumen de un líquido con su masa respectiva. En otras palabras, es el inverso de la densidad, por tanto usamos la siguiente expresión para el volumen específico:
Vesp = 1/d
Vesp = 1 / 0,87
Vesp = 1,15 cm³/gPara el caso del peso específico, se calcula como el cociente de la masa del líquido y su volumen que ocupa. Sin embargo no conocemos ninguno de esos dos datos, por lo que para calcular el peso específico solo basta multiplicar este valor por la aceleración de gravedad, que vamos a asumir para este problema que es 10 m/s². Y ademas cambiaremos las unidades de densidad de g/cm³ a kg/m³. Esto es porque las unidades de peso específico son N/m³ y los newton (N) son kg m/s².
d = 0,87 g/cm³ * (1 kg/1000g) * (100 cm/1m)³ = 870 kg/m³
Pe = 870 kg/m³ * 10 m/s²
Pe = 8700 N/m³ESpero te sirva.
I need help with this!!!
Answer:
0.73g/cm^3
Explanation:
d=m/v
d=11/15
d=0.73
Name each of the following organic molecules. 
Write the equilibrium expression of each chemical equation.
2H2S(g) 2H2(g) + S2(g)
Answer:
[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2
Explanation:
2H2S(g)⇋2H2(g)+S2(g)2H2S(g)⇋2H2(g)+S2(g)
The equilibrium constant expression in terms of concentrations is:
Kc=[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2.
The equilibrium expression for the given reaction can be written in terms of equilibrium constant which is the ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
What is equilibrium?Equilibrium is a state for a reversible reaction where, the rate of forward reaction is equal to the rate of backward reaction. The rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of the products.
The given reaction at equilibrium state is written as:
[tex]\rm 2H_{2}S (g)\leftrightharpoons 2H_{2} (g)+ S_{2}(g)[/tex]
The equilibrium constant Kb is ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
[tex]Kb = \rm \frac{[H_{2}S]^{2}}{[H_{2}]^{2} [S_{2}]}[/tex]
The rate of the reaction will be r = Kb [H₂]² [S₂].
To find more on equilibrium constant, refer here:
https://brainly.com/question/15118952
#SPJ2
A molten sample of 1.00kg of iron with a specific heat of 0.385J/g.K at 1000.K is immersed in a sample of water. If the water absorbs 270 kJ of heat what is the final temperature of the iron?
I need all the process.
Answer:
298. 7 K.
Explanation:
Hello!
In this case, since equation we use to compute the heat in a cooling or heating process is:
[tex]Q=mC(T_f-T_i)[/tex]
Whereas we are given the heat, mass, specific heat and initial temperature. Thus, we infer that we need to solve for the final temperature just as shown below:
[tex]T_f=T_i+\frac{Q}{mC}\\\\T_f=1000 K+\frac{-270000J}{1000g*0.385\frac{J}{g*K} } \\\\T_f=298.7 K[/tex]
It is important to notice that the iron release heat as water absorbs it, that is why it is taken negative.
Best regards!
If 3.53 g of CuNO, is dissolved in water to make a 0.330 M solution, what is the volume of the solution in milliliters?
Answer:
84.8 mL
Explanation:
From the question given above, the following data were obtained:
Mass of CuNO₃ = 3.53 g
Molarity of CuNO₃ = 0.330 M
Volume of solution =?
Next, we shall determine the number of mole in 3.53 g of CuNO₃. This can be obtained as follow:
Mass of CuNO₃ = 3.53 g
Molar mass of CuNO₃ = 63.5 + 14 + (16×3)
= 63.5 + 14 + 48
= 125.5 g/mol
Mole of CuNO₃ =?
Mole = mass / Molar mass
Mole of CuNO₃ = 3.53 / 125.5
Mole of CuNO₃ = 0.028 moles
Next, we shall determine the volume of the solution. This can be obtained as follow:
Molarity of CuNO₃ = 0.330 M
Mole of CuNO₃ = 0.028 moles
Volume of solution =?
Molarity = mole /Volume
0.330 = 0.028 / Volume
Cross multiply
0.330 × Volume = 0.028
Divide both side by 0.330
Volume = 0.028 / 0.330
Volume = 0.0848 L
Finally, we shall convert 0.0848 L to millilitres (mL). This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.0848 L = 0.0848 L × 1000 mL / 1 L
0.0848 L = 84.8 mL
Therefore, the volume of the solution is 84.8 mL.
Please answer, this is due in 30 minutes
Answer:
0.591 g of magnesium phosphate is the theoretical yield.
Magnesium nitrate is the limiting reactant.
Explanation:
Hello!
In this case, since the balanced reaction turns out:
[tex]3Mg(NO_3)_2+2Na_3PO_4\rightarrow Mg_3(PO_4)_2+6NaNO_3[/tex]
Next, we compute the grams of magnesium phosphate yielded by each reactant, considering the present mole ratios and molar masses:
[tex]m_{Mg_3(PO_4)_2}^{by\ Mg(NO_3)_2}=1.00gMg(NO_3)_2*\frac{1molMg(NO_3)_2}{148.31gMg(NO_3)_2}*\frac{1molMg_3(PO_4)_2}{3molMg(NO_3)_2} *\frac{262.86gMg_3(PO_4)_2}{1molMg_3(PO_4)_2} \\\\m_{Mg_3(PO_4)_2}^{by\ Mg(NO_3)_2}= 0.591gMg_3(PO_4)_2\\\\m_{Mg_3(PO_4)_2}^{by\ Na_3PO_4}=1.00gNa_3PO_4*\frac{1molNa_3PO_4}{163.94gNa_3PO_4}*\frac{1molMg_3(PO_4)_2}{2molNa_3PO_4} *\frac{262.86gMg_3(PO_4)_2}{1molMg_3(PO_4)_2} \\\\m_{Mg_3(PO_4)_2}^{by\ Na_3PO_4} = 0.802gMg_3(PO_4)_2[/tex]
Thus, we infer that the correct theoretical yielded mass is 0.591 g as magnesium nitrate is the limiting reactant for which it produces the fewest grams of product.
However, is not possible to compute the percent yield since no actual yield is given, and must be provided or indicated by the problem or an experiment and it not here, nevertheless, you may compute the percent yield by dividing the actual yield by the theoretical and then multiplying by 100:
[tex]Y=\frac{actual}{0.591g}*100\%[/tex]
Best regards!
What is the energy of an electron in the third energy level of hydrogen?
Answer:
Electrons in a hydrogen atom must be in one of the allowed energy levels. If an electron is in the first energy level, it must have exactly -13.6 eV of energy.
...
Energy Levels of Electrons.
Energy Level Energy
1 -13.6 eV
2 -3.4 eV
3 -1.51 eV
4 -.85 eV
A chemistry student needs 50.0ml of tetrahydrofuran for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of tetrahydrofuran is . Calculate the mass of tetrahydrofuran the student should weigh out. Be sure your answer has the correct number of significant digits.
Answer:
44.45 g of tetrahydrofuran.
Explanation:
From the question given above, the following data were obtained:
Volume of tetrahydrofuran = 50 mL
Density of tetrahydrofuran = 0.889 g/mL
Mass of tetrahydrofuran =?
Density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically, density is expressed as shown below:
Density = mass / volume
With the above formula, we shall determine the mass of tetrahydrofuran needed. This can be obtained as follow:
Volume of tetrahydrofuran = 50 mL
Density of tetrahydrofuran = 0.889 g/mL
Mass of tetrahydrofuran =?
Density = mass / volume
0.889 = mass / 50
Cross multiply
Mass = 0.889 × 50
Mass of tetrahydrofuran = 44.45 g
Therefore, the student should weigh out 44.45 g of tetrahydrofuran.
There are four conditions an atom needs to meet to participate in hydrogen bonding. It needs to be_______ enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one________ atom, it needs to be_________enough to create a delta on the connected hydrogen, and it needs to have at least one________.
Answer:
The conditions are
1) Small enough
2) Electronegative atom
3) highly electronegative
4) lone pair of electrons
The correct statement therefore is
It needs to be small enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one electronegative atom, it needs to be highly electronegative enough to create a delta on the connected hydrogen, and it needs to have at least one lone pair of electrons.
Explanation:
Hydrogen bonding is a type of intermolecular bond that occurs between the partial positive charge (delta) on a hydrogen atom bonded to a small highly electronegative element (like nitrogen, oxygen or fluorine) and the free electrons on another electronegative element of another molecule.
The hydrogen atom with the partial positive charge (delta) is known as the hydrogen bond donor, while the electronegative element, carrying lone electrons is called the hydrogen bond acceptor.
Let's take a deeper look at these terms:
1) Hydrogen bond donor
Using water (H₂O) as an example, the high electronegativity of the oxygen atom covalently bonded to the hydrogen atom draws the lone electron in the 1s orbital of the hydrogen atom, creating a partial positive charge (d⁺) on the hydrogen atom. This is what happens within one water molecule
2) Hydrogen bond acceptor
When two or more molecules of water interact, the partial positive charge (d⁺) on the hydrogen atom of one molecule, is attracted to the valence or free electrons on the oxygen atom of a nearby molecule of water thus creating a dipole-dipole intermolecular bond known as a hydrogen bond.
For the hydrogen bond to be effective, the electronegative atom bonded to the hydrogen acting as the hydrogen bond donor in the first water molecule needs to be small enough so as not to disrupt the 1s orbital of the hydrogen atom. The smaller the size of the electronegative atom, the stronger the partial negative charge created on the hydrogen atom.
The valence or free pair of electrons on the electronegative (oxygen) atom of the second molecule of water (hydrogen bond acceptor) is what attracts the partial positive charge on the hydrogen atom to create the hydrogen bond
18. What is one of the three things that cause the surface currents of the oceans?
A.differences in salinity
B.temperature differences
C. density differences
D. Coriolis effect
Answer:
b. temperature difference
Two colorless chemicals combine inside a glow
stick. When the chemicals combine, they produce
brightly colored light. The glow stick's temperature
does not change.
emission of heat
emission of light
color change
formation of gas
Answer:
Option B & Option C
Explanation:
correct on edge! :D
When chemicals combine chemical change takes place which is accompanied by emission of heat and light.
What is a chemical change?Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ5
Which has more calories: table sugar or aspartame?
Hello there!
Aspartame has 4 kilocalories of energy per gram and table sugar has 3.9 kilocalories. They are pretty much same but aspartame is 200 times sweeter than sucrose so probably would be aspartame that has more calories.
Why is it important to know gas properties at STP?
Answer:
STP values are most often cited for gases because their characteristics change dramatically with temperature and pressure. One common definition of STP is a temperature of 273 K (0° Celsius or 32° Fahrenheit) and the standard pressure of 1 atm. Under these conditions, one mole of a gas occupies 22.4 L.
What is the percent composition of Mg in the compound Mg3(PO4)2?
A 21.92%
B 23.57%
C 32.32%
D 27.74%
Answer:
D 27.74%
Explanation:
Percent composition of Magnesium (Mg) in Magnesium Phosphate compound ie Mg3(PO4)2 = 27.74%
Answer:
The answer is D
Explanation:
I took the test
Consider the following reaction where K. = 9.52 10 2 at 350 K.
CH,(g) + CC14(2)—2CH2Cl2(g)
A reaction mixture was found to contain 2.21*10-2 moles of CH4(E), 3.8710-2 moles of CC1,(g) and 1.06-10-2 moles of CH,C12(2), in
a 1.00 liter container
Is the reaction at equilibrium?
If not, what direction must it run in order to reach equilibrium?
The reaction quotient, Qc equals
The reaction
A. must run in the forward direction to reach equilibrium
B. must run in the reverse direction to reach equilibrium
C. is at equilibrium
Answer:
The correct answer is A :))
please help me with this problem
the amount of reactants = the amount of products
N2 + 3H2 --> 2NH3