Which of the following statements about a free pricing strategy is false?1. A) Free products and services can knock out potential and actual competitors. 2. B) The free pricing strategy was born in the early days of the Web. 3. C) It is dicult to convert free customers into paying customers. 4. D) Free products and services can help build market awareness.

False. The inductive effect starts as soon as a current begins to flow through an inductor, regardless of the value defined by Ohm's law.
 

Ohm's law only applies to resistive circuits and relates the voltage, current, and resistance of a circuit.
In a DC circuit, the inductive effect occurs when the current through an inductor changes. Ohm's law,

which states that the current in a circuit is directly proportional to the voltage and inversely proportional to the resistance, applies to resistive elements in the circuit. The inductive effect and Ohm's law are related but not dependent on each other for a constant current.

To know more about inductive effect  visit:-

https://brainly.com/question/30752659

#SPJ11

The SELECT INTO statement allows you to create a new table based on the columns and data from an existing table. The syntax for this statement is as follows:
SELECT * INTO newtable [IN externaldb] FROM table1;

In this statement, "newtable" is the name of the new table you want to create, "externaldb" is the name of an external database (if you want to create the new table in a different database than the original table), and "table1" is the name of the existing table you want to copy.

For example, if you want to create a backup copy of the "Customers" table in a separate database called "Backup.mdb", you could use the following statement:

SELECT * INTO CustomersBackup2013 IN 'Backup.mdb' FROM Customers;

This would create a new table called "CustomersBackup2013" in the "Backup.mdb" database, with all of the columns and data from the "Customers" table.

Alternatively, if you only want to copy certain columns from the original table, you can specify those columns in the SELECT statement:

SELECT CustomerName, ContactName INTO CustomersBackup2013 FROM Customers;

This statement would create a new table called "CustomersBackup2013" with only the "CustomerName" and "ContactName" columns from the "Customers" table.

Finally, if you want to rename the columns in the new table, you can use the AS clause in the SELECT statement:

SELECT CustomerName AS Name, ContactName AS Contact INTO CustomersBackup2013 FROM Customers;

This statement would create a new table called "CustomersBackup2013" with two columns: "Name" (renamed from "CustomerName") and "Contact" (renamed from "ContactName").

You can learn more about databases at: brainly.com/question/30634903

#SPJ11

The purpose is to study water motion near the bottom of a shallow channel as a large barge passes over, and the velocity of the model is determined by applying the Froude number criteria for dynamic similitude.

The paragraph describes a model study in a towing tank to observe the water motion near the bottom of a shallow channel as a large barge passes over.

The Froude number criteria for dynamic similitude is assumed to be followed, and a 1/50 scale model is used.

The prototype barge has a typical speed of 15 knots, and the task is to determine the speed at which the model should be towed to simulate the prototype correctly.

Additionally, the velocity of a small particle near the bottom of the model channel is given, and the problem requires calculating the velocity at the corresponding point in the prototype channel.

Learn more about model

brainly.com/question/28713017

#SPJ11

We will use the terms "solenoid" and "intensity" to find the magnetic field intensity at the center of the solenoid.

To find the magnetic field intensity at the center of the solenoid, we can use Ampere's Law. The formula for the magnetic field intensity (B) inside a solenoid is:

B = μ₀ * n * I

where B is the magnetic field intensity, μ₀ is the permeability of free space (4π × 10^-7 Tm/A), n is the number of turns per unit length (turns/meter), and I is the current (A).

1. First, find the number of turns per unit length (n). Given that the solenoid has 200 turns and is 10 cm long, convert the length to meters:

Length = 10 cm = 0.1 m

n = (number of turns) / (length) = 200 / 0.1 = 2000 turns/m

2. Next, use the formula B = μ₀ * n * I:

B = (4π × 10^-7 Tm/A) * (2000 turns/m) * (1.0 A)
B ≈ 0.025 T (Tesla)

So, the magnetic field intensity at the very center of the solenoid is approximately 0.025 T.

Now let's consider the case where 10.0 cm >> 1.0 cm, which means the length of the solenoid is much greater than its radius. In this case, the magnetic field intensity remains nearly the same because the formula B = μ₀ * n * I doesn't depend on the radius of the solenoid. Therefore, the magnetic field intensity at the center of the solenoid is still approximately 0.025 T, even if 10.0 cm >> 1.0 cm.

To learn more about Solenoid - brainly.com/question/15504705

#SPJ11

Selective Laser Sintering (SLS) is an additive manufacturing process that uses a high-power laser to fuse small particles of material, typically plastic or metal powders, into a three-dimensional structure.

The process begins with the creation of a digital model using computer-aided design (CAD) software. This model is then divided into thin layers, which guide the SLS machine in building the final object. During the SLS process, a layer of powder is evenly spread across the build platform. The laser then selectively sinters, or fuses, the powder particles according to the CAD model's cross-sectional layer. Once a layer is completed, the platform lowers and a new layer of powder is applied. The process is repeated, with each subsequent layer fusing to the one below it until the object is fully formed. Upon completion, the excess powder is removed, revealing the finished product. SLS offers several advantages, including the ability to produce complex geometries, reduced material waste, and minimal need for support structures during production. It is commonly used in industries such as aerospace, automotive, and medical for rapid prototyping and manufacturing of functional parts.

Learn more about Selective Laser Sintering here

https://brainly.com/question/28136920

#SPJ11

True. A surface grinder is a precision grinding machine that is capable of producing a surface flat within plus or minus .0001. It uses a rotating grinding wheel to grind and remove material from a workpiece, resulting in a smooth and flat surface finish.

A surface grinder can typically produce a surface flat within plus or minus 0.0001 inches. This precision is achieved by using a grinding wheel to remove material from a workpiece, resulting in a flat and smooth surface.

An extensively utilised abrasive machining technique removes metallic or nonmetallic material chips from a workpiece to flatten or smoothen its surface using a spinning wheel coated in rough particles (grinding wheel).

To know more about grinder visit:-

https://brainly.com/question/4130226

#SPJ11

When uncoupling a trailer, it is important to follow proper procedures for safety. After shutting off the trailer air supply and locking the trailer brakes, you should always first apply your tractor parking brakes immediately. The correct answer is (1).

This will prevent any unintentional movement of the tractor or trailer during the uncoupling process. Next, you can begin to lower the trailer landing gear to support the weight of the trailer and make it easier to disconnect. Finally, you can back up gently and ease pressure on the fifth wheel locking jaws to release the trailer from the tractor. It is important to note that all steps should be done in order and with caution. Failure to properly uncouple a trailer can result in damage to equipment or injury to yourself or others.

The correct answer is (1) immediately apply your tractor parking brakes.

For more information about tractor parking brakes, visit:

https://brainly.com/question/16012653

#SPJ11

Electric clippers are typically powered by either a rotary motor or a magnetic motor. However, there is another type of motor that can be used in electric clippers - the linear motor.

Linear motors are less commonly used in clippers and are typically found in higher-end models. The type of motor used in an electric clipper can affect the performance and durability of the device. Magnetic motors, for example, are known for their power and longevity, making them a popular choice for professional-grade clippers. They operate on the principle of electromagnetism, where the magnetic field created by the motor's coils interacts with the permanent magnet in the clipper's blade, causing it to oscillate rapidly. This motion results in a smooth and efficient cutting action, even when dealing with thick or coarse hair. When selecting an electric clipper, it is important to consider the type of motor used, as well as other features such as blade quality and content loaded.

Learn more about clippers here

https://brainly.com/question/17925485

#SPJ11

In this code, we first import the ArrayList class from java.util package. Then, inside the main method, we create an ArrayList called "numbers" that can store Integer values. We use a for loop to iterate through integer values from 1 to 10 and use the add() method to add each value to the ArrayList. Finally, we print the ArrayList to see the result.

You create an ArrayList with integer values from 1 to 10. Here's the code in Java:
```java
import java.util.ArrayList;
public class Main {
   public static void main(String[] args) {
       // Create an ArrayList of Integer values
       ArrayList numbers = new ArrayList<>();
       // Fill the ArrayList with integer values 1 through 10
       for (int i = 1; i <= 10; i++) {
           numbers.add(i);
       }
       // Print the ArrayList
       System.out.println(numbers);
   }
}
```

Learn more about Integer values here

https://brainly.com/question/29297685

#SPJ11

In a client/server system, there are a number of possible issues that can arise during the transmission process. One common problem is latency, which occurs when the time it takes for the request to travel from the client to the server and back again is longer than expected.

This can be caused by a variety of factors, including network congestion, distance, and bandwidth limitations. Another possible issue is packet loss, which occurs when one or more packets of data fail to arrive at their destination. This can be caused by a variety of factors, including network congestion, faulty hardware, and software bugs. Additionally, there may be issues with the client or server software itself. For example, the client may send an improperly formatted request or the server may fail to process the request correctly. These types of issues can result in delays or errors in the transmission process. Overall, it is important to have a robust and reliable client/server system in place to minimize the risk of transmission issues. This can include implementing redundancy and failover measures, optimizing network performance, and regularly testing and updating the software.

Learn more about client/server system here

https://brainly.com/question/28320301

#SPJ11

The maximum output of the 1000lb load cell with a sensitivity of 3.5mV/V and an excitation voltage of 10V is 0.035V.

To find the maximum output of a 1000lb load cell with a sensitivity of 3.5mV/V and an excitation voltage of 10V, follow these steps:

1. Identify the given values: load cell sensitivity is 3.5mV/V, and the excitation voltage is 10V.
2. Convert the sensitivity from millivolts per volt (mV/V) to volts per volt (V/V) by dividing by 1000: 3.5mV/V ÷ 1000 = 0.0035V/V.
3. Multiply the sensitivity (in V/V) by the excitation voltage: 0.0035V/V × 10V = 0.035V.

You can learn more about excitation voltage at: brainly.com/question/14820417

#SPJ11

Least Material Condition (LMC) refers to the state of a part or feature where it has the minimum permissible material or size, resulting in the lowest possible weight or mass. In manufacturing and engineering, LMC is essential for maintaining tight tolerances and ensuring proper assembly, functionality, and safety of components.

Least material condition (LMC) is a GD&T (Geometric Dimensioning and Tolerancing) term that refers to the condition where a part or feature of a part has the least amount of material possible, while still meeting the specified functional requirements. This means that the part or feature is at its minimum material limit, allowing for maximum clearance or maximum material movement. In other words, LMC defines the minimum amount of material needed to produce a functional part or feature. It is often used in the design and manufacturing process to minimize material usage and costs while ensuring proper functionality.

Learn more about tolerances here

https://brainly.com/question/20066466

#SPJ11

The anti-collision lights on an aircraft will typically be on whenever the aircraft is in operation, such as during taxiing, takeoff, flight, and landing. These lights are crucial for improving visibility and preventing collisions with other aircraft.

The anti-collision lights will be on when the aircraft's electrical power is turned on and the content is loaded. The one scene when they won't be on is during daylight hours when visibility is good and the pilot determines that it is not necessary to have them on. The one scenario when anti-collision lights might not be on is when the aircraft is parked and its engines are shut down. In this case, the anti-collision lights are turned off to avoid any confusion with other moving aircraft in the vicinity. Any machine that can fly is an aircraft. An aircraft can be anything from a hot air balloon to a helicopter to a flying platform! An airplane is a particular kind of heavier-than-air aircraft with fixed wings that is capable of sustained, powered, and controlled flight. It also refers to a particular brand and basic model of aircraft, including modifications that do not affect the aircraft's handling or flight characteristics.

Learn more about aircraft

https://brainly.com/question/28192881

#SPJ11

Whenever an aircraft is in use, such as during taxiing, takeoff, flight, and landing, the anti-collision lights are normally on. The visibility they provide is essential for enhancing safety and avoiding collisions with other aircraft.

When the aircraft's electrical power is turned on and the content is loaded, the anti-collision lights will turn on.When visibility is good during the day and the pilot decides it is not necessary to have them on, they won't be on in all scenes.When the aeroplane is parked and its engines are off, that is the only situation in which anti-collision lights might not be activated. To minimise any confusion with other moving aircraft in the area, the anti-collision lights are switched off in this situation.

Learn more about aircraft visit;

brainly.com/question/28192881

#SPJ11

The average turnaround time for round robin scheduling with 3 processes of 3 time units each and a quantum of 1 time unit is 5 time units.

In round robin scheduling, each process is given a fixed time slice or quantum to execute, after which the CPU is preempted and the next process is executed. The time slice is typically small, such as 1 unit of time, so that each process is given a fair share of the CPU. In this case, each process would execute for 1 unit of time and then be preempted, for a total of 3 rounds.

The turnaround time for each process would be the time it takes to complete execution, which is 3 units of time, plus the time spent waiting in the queue, which is 2 units of time (since each process has to wait for the other two processes to execute). Therefore, the average turnaround time for all 3 processes would be (3+2) + (3+2) + (3+2) / 3 = 15/3 = 5 units of time.

You can learn more about round robin scheduling at

https://brainly.com/question/14851240

#SPJ11

In a one-dimensional infinite potential well, the energy levels do not depend on the well's potential. Here's an explanation using the given terms:

1. Dimensional: We are considering a one-dimensional infinite potential well, which means the particle is confined to move along a single axis (x-axis) within the well.

2. Potential: The infinite potential well has potential energy of zero inside the well (V(x) = 0) and an infinitely high potential energy outside the well. This means that the particle cannot escape the well, as it would require infinite energy to do so.

3. Energy: In a one-dimensional infinite potential well, the energy levels of the particle are quantized, meaning they can only take on specific discrete values. These energy levels are given by the equation:

E_n = (n^2 * h^2) / (8 * m * L^2)

where E_n is the energy level, n is an integer (1, 2, 3, ...), h is the Planck constant, m is the mass of the particle, and L is the width of the well.

From this equation, we can see that the energy levels depend on the particle's mass (m) and the width of the well (L), but not on the potential energy of the well itself. This is because the particle is confined within the well, and its energy levels are determined by the spatial confinement and mass of the particle rather than the well's potential energy.

To learn more about Energy levels - brainly.com/question/29736874

#SPJ11

A device designed to assist the pilot in moving the controls against the force of the air flow is known as a trim tab.

So, the correct answer is B.

Trim tabs are small, adjustable surfaces attached to the trailing edge of larger control surfaces, such as ailerons, elevators, or rudders.

They help the pilot maintain a desired aircraft attitude without constant pressure on the control stick or yoke. By adjusting the trim tab, the pilot can neutralize control forces and minimize fatigue during flight.

Trim tabs are essential for maintaining stability and control, especially during long flights. While options A, C, and D may be involved in flight control, they do not specifically address the assistance against air flow force like trim tabs do.

Hence, the answer for this question is B.

Learn more about flight control at

https://brainly.com/question/31020660

#SPJ11

Cruising altitudes begin at 18,000 feet MSL (mean sea level) for flights within the United States. This is according to CFR part 91, which governs general operating and flight rules for civil aircraft.

Cruising altitudes begin at 18,000 feet MSL is because this is where the transition from altitude-based to flight level-based separation occurs. At and above 18,000 feet MSL, aircraft are separated by a minimum of 1,000 feet vertically.

CFR (Code of Federal Regulations) Part 91, cruising altitudes for aircraft are expressed as MSL (Mean Sea Level) rather than AGL (Above Ground Level). This is to ensure a standardized reference point for all aircraft, which helps maintain safe and organized air traffic. In CFR Part 91.179, it states that cruising altitudes start at 18,000 feet MSL for Instrument Flight Rules (IFR) flights.

To know more about Cruising altitudes visit:-

https://brainly.com/question/30711737

#SPJ11

If the brakes did not release when you pushed the trailer air supply valve, there are a few steps you should take to troubleshoot the issue. The first thing you should do is to check the air line connections. Make sure that they are properly connected and that there are no leaks or blockages in the lines. If you find any issues, address them before attempting to release the brakes.

For such more question on potential

https://brainly.com/question/26978411

#SPJ11

The answer is D. 15. This is because a CROSS JOIN combines every record from the first table with every record from the second table, resulting in 56 records but  the query is selecting all columns from both tables (i.e. SELECT *), so the result set will have 15 columns.

This is because a CROSS JOIN combines every record from the first table with every record from the second table, resulting in 56 records but  the query is selecting all columns from both tables (i.e. SELECT *), so the result set will have 15 columns.

This is because a cross join produces a result set that is the product of the number of records in each table. This is because a CROSS JOIN combines every record from the first table with every record from the second table, resulting in 7 (customers) x 8 (orders) = 56 records

However, the query is selecting all columns from both tables (i.e. SELECT *), so the result set will have 15 columns (all the columns from the customers table plus all the columns from the orders table). Therefore, the final answer is D. 15.

Know more about the CROSS JOIN

https://brainly.com/question/28023444

#SPJ11

The slip direction and angle between the slip direction of the applied stress is given.

Tensile stress is the form of stress that happens when a material is pulled or stretched. It is defined as the ratio of the applied force per unit area of material to the material's original cross-sectional area prior to the application of the force. Tensile stress is commonly quantified in force per unit area units such as pounds per square inch (psi) or newtons per square meter (N/m2).

When tensile stress is applied to a material, it suffers elongation or deformation along the axis of the applied force. Check the attachment for more information.

Learn more about tensile on

https://brainly.com/question/25748369

#SPJ1

Drilling a well into a fractured bedrock aquifer can be more challenging and complicated than drilling into an aquifer made up of loose sediment.

This is because bedrock aquifers have a more complex geological structure, with fractures and crevices that can make it harder to locate and access the water source. Additionally, drilling into bedrock requires specialized equipment and techniques, and the yield of the well may be lower than in a sedimentary aquifer. It is important to carefully assess the geology and hydrology of the site before beginning drilling to ensure that the well is properly located and constructed to maximize its productivity and longevity.
Drilling a well into a fractured bedrock aquifer can indeed be problematic compared to drilling into an aquifer consisting of loose sediment. This is because fractured bedrock aquifers have irregular formations and varying permeability, making it difficult to accurately predict water flow and availability. In contrast, aquifers with loose sediment have more uniform characteristics, making drilling and water extraction generally more predictable and manageable.

Learn more about Drilling here:

https://brainly.com/question/29566890

#SPJ11

When the (M) modified time is before the created time, it means that the file or document has been edited or modified after it was originally created.

The modified time refers to the last time the file was modified, while the created time refers to the time the file was first created or saved. This can happen in various scenarios, such as when someone edits a document and saves the changes, or when a file is copied from one location to another, resulting in a new created time but retaining the original modified time. In some cases, it could also indicate that the file's metadata has been manipulated or altered. It is important to pay attention to both the modified and created times when working with files, as they can provide useful information about the file's history and version control.

Learn more about time here

https://brainly.com/question/26046491

#SPJ11

FAA Form 7233-1 is filed prior to departing with Flight Service Stations (FSS) in the United States, either by phone or radio.

This form is also known as a Flight Plan and it is used to provide information to air traffic control about the planned route of the aircraft, the estimated time of arrival, and other essential details.

Filing a Flight Plan is a mandatory requirement for certain types of flights, including those that involve instrument flight rules (IFR) and international flights. It is also recommended for all other flights as a safety measure.

When filing a Flight Plan with FSS, the pilot must provide accurate information about the aircraft, the crew, and the intended flight path. This information helps air traffic control to monitor the flight and respond quickly in case of an emergency.

In summary, FAA Form 7233-1 is an essential tool for flight planning and safety, and it must be filed with FSS prior to departing, either by phone or radio.

Learn more about Flight Plan here: https://brainly.com/question/29582662

#SPJ11

The VFR cruising altitudes begin at and above 3,000 feet above the surface and up to and including 18,000 feet MSL.

Visual Flight Rules (VFR) cruising altitudes are set for aircraft operating in uncontrolled airspace. These altitudes are used to maintain safe vertical separation between aircraft and to help avoid collision. The VFR cruising altitudes are established in increments of 500 feet based on the magnetic heading of the aircraft.

For headings of 0-179 degrees, the altitude should be maintained at an odd-numbered altitude plus 500 feet (e.g., 3,500 feet, 5,500 feet, etc.). For headings of 180-359 degrees, the altitude should be maintained at an even-numbered altitude plus 500 feet (e.g., 4,500 feet, 6,500 feet, etc.).

You can learn more about VFR cruising at

https://brainly.com/question/14310276

#SPJ11

True, each job that a user completes, such as filling an order, is called a user task. This term refers to specific actions or responsibilities that users must complete within a system or application.

User tasks are a specific type of task in business process management that require the input or action of a user to complete. They are a key component of workflows and ensure that important steps in a process are completed accurately and efficiently. The content loaded into each user task will vary depending on the specific job and the needs of the organization.User tasks are the clearly defined steps a user needs to complete in order to solve their problems and tackle their jobs to be done (JTBD) when using your product or service.

Here are a few examples to give you context – you can easily imagine these as part of many SaaS workflows:

Adding team members for collaboration

Generating performance reports

Integrating third-party tools

learn more about user task here:

https://brainly.com/question/24080039

#SPJ11

A CNMG432 insert would have a corner radius of:

Your answer: 0.031 inches (or 0.8 mm).

To break it down:
- "CNMG" refers to the insert's shape, relief angle, tolerance, and insert type.
- "4" indicates the insert size, which is 1/2 inch (12.7 mm) in this case.
- "3" is the corner radius designation. In the ISO system, a "3" represents a corner radius of 0.8 mm or 0.031 inches.
- "2" represents the insert's thickness, which is not relevant to the corner radius.

So, a CNMG432 insert has a corner radius of 0.031 inches (0.8 mm).

To know more about corner radius

https://brainly.com/question/31328768?

#SPJ11

When an aeroplane is flying in a level turn, it is experiencing an increased load factor due to the centripetal force acting on it. This load factor causes an increase in the aerodynamic forces acting on the aircraft, including the lift force. In turn, this increase in lift force requires a higher airspeed to maintain level flight.

To determine the stalling speed of an aeroplane in a level turn with a load factor of 1.5, we need to use the formula:

Vs = √(n × Vs0)

where Vs is the stalling speed in the turn, n is the load factor, and Vs0 is the stalling speed in straight and level flight.

Substituting the given values, we get:

Vs = √(1.5 × 100)

Vs = √150

Vs ≈ 12.2 kt

Therefore, the stalling speed of the aeroplane in a level turn with a load factor of 1.5 is approximately 122 kt. The correct answer is option B.

For such more question on aeroplane

https://brainly.com/question/30683068

#SPJ11

Clippers with a single cutting head typically have a set of sharp, closely-spaced blades that work together to trim or cut hair effectively. The cutting head is an essential component of the clipper, as it performs the actual hair cutting action. When the clipper is powered on, the cutting head's blades move rapidly, allowing for efficient and precise haircuts.

Single cutting head clippers are often used for both personal and professional hair grooming purposes. They are versatile and can be utilized for various hair lengths and styles, depending on the available attachments and settings. The cutting head can be adjusted or replaced with different attachments to achieve the desired hair length or style. Some clippers also feature adjustable blade lengths to provide additional customization options. In conclusion, clippers with a single cutting head offer flexibility, precision, and ease of use, making them a popular choice for hair grooming. By adjusting the cutting head or using various attachments, users can achieve a wide range of haircuts and styles with a single tool. Remember to clean and maintain the cutting head regularly to ensure optimal performance and longevity of the clippers.

Learn more about Clippers here

https://brainly.com/question/17925485

#SPJ11

The correct answer is A) The FCC now regulates ISP pricing. This statement is not true. The FCC has not regulated ISP pricing under net neutrality rules.

The explanation is that net neutrality refers to the principle that all internet traffic should be treated equally, without discrimination or preferential treatment. The FCC ruled that Internet broadband service providers should be viewed as public utilities similar to telephone companies, which means they are subject to regulations to ensure equal access to all users.

Net neutrality is focused on ensuring equal treatment of data and preventing ISPs from discriminating against users based on factors like protocol or amount of usage.

To know more about FCC visit:-

https://brainly.com/question/29890205

#SPJ11

Both technicians A and B are correct in their statements regarding too much valve lift.

Technician A is correct in saying that too much valve lift can cause less air to flow into the combustion chamber. This is because as the valve lifts higher, it restricts the airflow through the intake and exhaust ports. This can result in decreased performance and power output, as well as an increase in fuel consumption. Therefore, the valve lift needs to be optimized to ensure that the engine receives the optimal amount of air and fuel mixture.

Technician B is also correct in saying that too much valve lift can cause coil bind. This occurs when the spring is compressed to its maximum limit and cannot be compressed further, resulting in coil bind. This can cause engine damage, including broken valve springs and valve train failure. Therefore, the valve lift needs to be within the manufacturer's recommended limits to prevent coil bind from occurring.

In summary, both technicians A and B are correct in their statements regarding too much valve lift. It is important to find the optimal valve lift to ensure the engine receives the appropriate amount of air and fuel mixture and to prevent coil bind from occurring.

Know more about Technician here :

https://brainly.com/question/31541559

#SPJ11