Answer:
B
Explanation:
Just did it on usa test prep
The element which is most likely to be magnesium is the element with the electronic configuration same as magnesium.
What is an element?It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ6
In the apple activity you completed which of the following is an example of a constant
Answer: the type of apple because it is an example of a constant
Explanation:
How many cesium atoms are in 21.9 grams?
In Bohr’s model of the atom, where are the electrons and protons located?
A woman is found dead on a boat floating in the middle of a lake at 4:30am. There is blunt force trauma to her head but no other discernable damage. She is approximately 30 pounds overweight. She is wearing thermal clothing and a winter jacket, gloves, and hat. Climatological data indicate it was a clear, cold, and windy night with no precipitation. Calculate the time of death based only on a body temperature of 15.6°C (60.8°F)? Now consider the other factors presented. How would each affect this estimation?
Answer:
Dead bodies lose one degree Celsius per hour, which we could deduce that the person died 12 hours ago.
Explanation:
On the other hand, it is very important to take into account that this number of hours is very approximate, since not only does it vary greatly with the environment and the acclimatization of the environment in which the person dies, but also in this specific case, insulating clothing was presented , which made the loss of body heat much more difficult and could easily be more than 12 hours.
The minimum for this particular situation is 12 hours to 24 hours possible postmortem.
HELP QUICK What is the mass of an object that has a volume of 2 ml and a density of 10g/ml?
Answer:
The answer is 20 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question we have
mass = 10 × 2
We have the final answer as
20 gHope this helps you
What causes the change within every twenty four hours from day to night on Earth?
A)
Earth's rotation on its axis
the tilt of Earth on its axis
Tarth's revolution around the sun
the distance from Larth to the Sun
Tamashenomena on the top of the sun that appear as dark spots compar
Please answer
Answer:
Earth's rotation.
Explanation:
Most of the options are obviously incorrect, with the exception of tilt. However, tilt is the cause of seasons, not days.
Answer: Earth's rotation on its axis
Explanation:
Which of the following is the least likely to remain homogeneous?
. O A. All of these
O B. A supersaturated solution
O C. An unsaturated solution
O D. A saturated solution
Answer:
all
of them
Explanation:
What is the oxidation number of Gallium?
Answer: +3
Explanation: Gallium liquefies just above room temperature. Gallium is a soft solid, however it quickly becomes liquid when heated.
Burning 1 kg of coal releases about 3 million joules of energy. If you could use all of the chemical energy to lift another kilogram of coal, how high could you lift it?
I could lift 3.06 x 10⁵ m high
Further explanationEnergy is the ability to do work. Energy can change from one energy to another
Potential energy is the energy that an object has because of its position
The potential energy can be formulated:
Ep = m. g. h
E = potential energy of an object, joule
m = object mass, kg
g = gravity acceleration, m / s²
h = height of an object, m
energy of coal = 3.10⁶ J
mass = 1 kg
g = 9.8 m/s²
[tex]\tt h=\dfrac{E}{m.g}\\\\h=\dfrac{3.10^6}{1\times 9.8}=3.06\times 10^5`m[/tex]
PLZ HELP ME!!!!!!!!!!!!!!!
Answer:Graduated Cylinder
Explanation:
You use the water displacement test to find the volume of irregular shaped objects.
Answer:
Graduated Cylinder
A + ion (positive ion, one with extra positive charge)?
Answer:
If an ion has a positive charge then it has lost an electrons.
Explanation:
So you don't "gain" anything when the ion has a positive charge. It loses an electron which means it has more protons than electrons. Thus, the ion has a positive charge. If it "gained" an electron then it would have a negative charge.
How many atoms are in a sample of 2.89 moles of potassium (K)?
Answer:
The answer is
1.74 × 10²⁴ potassium atomsExplanation:
To find the number of atoms given the number of moles we use the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
n = 2.89 moles
We have
N = 6.02 × 10²³ × 2.89
We have the final answer as
1.74 × 10²⁴ potassium atomsHope this helps you
In an ionic bond
a. electrons are shared equally
b. protons are transferred
c. electrons are shared unequally
d. electrons are transferred
Answer: a chemical bond; in which one atom donates an electron to another atom
Explanation:
For lunch you have a glass of sweetened ice tea. The glass contains crushed tea leaves, sugar, a slice of lemon, and both liquid and frozen water (ice cubes). Which of the following categories of matter best describes the contents of the glass? *
Answer:
I think solids
Explanation:
sorry if its not right
Determine how you would prepare 220 mL of a 0.500 M potassium hydroxide solution starting with: a) solid potassium hydroxide b) a 1.25 M potassium hydroxide solution
Answer:
a) 6.17 g of solid KOH
b) 88.0 mL of a 1.25 M potassium hydroxide solution
Explanation:
a) We have to determine the mass of solid potassium hydroxide that has to be weighed to prepare 220 mL of a 0.500 M potassium hydroxide solution. We will also require the molar mass of potassium hydroxide, KOH, 56.11 g/mol.
0.220 L × (0.500 mol/L) × (56.11 g/mol) = 6.17 g
b) We will use the dilution rule to determine the volume of the 1.25 M potassium hydroxide solution to be measured.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0.500 M × 220 mL / 1.25 M = 88.0 mL
How many atoms of aluminum are in a molecule of magnesium aluminum oxide (Al2MgO4)?
Answer:
12
Explanation:
3. describe how unequal heating causes weather
Answer:
The uneven heating causes temperature differences, which in turn cause air currents (wind) to develop, which then move heat from where there is more heat (higher temperatures) to where there is less heat (lower temperatures).
Explanation:
Are hemoglobin formation and functioning brains and muscles benefits of Iron?
the product of 173.06 times 0.21 should be reported as what using proper number of sig figs?
Answer:
36.3
Explanation:
The full answer would be 36.3426, but because of the 0.21, you round it down to 3 sig figs.
One of the uses of methanol (CH3OH) in dilute form is as a windshield washer antifreeze. In pure form, methanol has a molar concentration of 24.7M. How many moles are contained in 500 mL of solution?
Mole itself is the number of particles contained in a substance
1 mole = 6.02.10²³ particles
Mole : the ratio of the amount of substance mass and its molar mass
[tex]\large{\boxed{\boxed{\bold{mole=\frac{mass}{molar\:mass}}}}[/tex]
Molarity is a way to express the concentration of the solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
[tex]\large{\boxed {\bold {M ~ = ~ \frac {n} {V}}}[/tex]
Molar concentration of methanol=24.7 M
Volume of solution = 500 ml = 0.5 L
[tex]\tt mol=M\times V\\\\mol=24.7\times 0.5\\\\mol=12.35[/tex]
Matter is anything that takes up space and can be described by physical and chemical properties. Which statement
BEST differentiates chemical properties from physical properties?
A)
Physical properties are properties that can be physically seen or touched,
while chemical properties can only be found when matter is mixed with
specific chemicals.
B)
Physical properties are measured when matter changes its physical state,
while chemical properties can only be measured if matter remains in one
state for an extended time.
C)
Physical properties are difficult to measure because they require special
tools to detect, and chemical properties are easy to measure and require
not special tools to detect.
D)
Physical properties can be measured/observed without changing matter
into something else, while chemical properties describe matter's ability to
react/combine with other matter.
Answer:
D)
Physical properties can be measured/observed without changing matter
into something else, while chemical properties describe matter's ability to
react/combine with other matter.
Explanation:
Physical Change
The changes that occur only due to change in shape or physical properties but their chemical or internal composition remain unchanged.
1 = These changes were reversible.
2= They have same chemical property.
3= These changes can be observed with naked eye.
Example :
Water converting to Ice
Water converting to gas
In this water molecule remain the same only they rearrange themselves that change its state of mater not composition
Chemical change:
The changes, that occur due to change in the composition of a substance and result in a different compound is known as chemical change.
1 = These changes are irreversible
2 = These changes occur due to chemical reactions
3 = These may not be observed with naked eye
Example:
Combustion of fuel or wood: that oil or wood convert into energy, CO₂ and ash in case of wood
Boiling of egg: that change the chemical composition of protein in the egg .
The reaction of Hydrogen and oxygen:
H₂ (g) + O₂ (g) → 2H₂O (l)
Which technology is shown in the photograph?
A. Negative controls
B. Biostimulation reaction
C. Gel electrophoresis
D. Polymerase chain reaction
Answer:
C
Explanation:
Apex
Line M passes through the points (-5, 9) and (-1,9).
12
10-
8
6
2
-12-10-8-6-4-22
2
6 8 10 12 X
6
-10
-12-
Which is true of line M?
Answer:
line m is vertical line with an undefined slopel line correct answer is 6 8 10 12 x
I NEED HELP!!! How is continental crust different from oceanic crust?
Oceanic crust is thinner and more likely to sink.
Oceanic crust is thicker and more dense.
Continental crust is more dense and lighter.
Continental crust is thicker and more likely to sink.
Answer:
A
Explanation:
Oceanic crust is thinner and more likely to sink
Answer:
The answer is A Oceanic crust is thinner and more likely to sink.
Explanation:
I hope this is right sorry if it's not.
1. A teacher instructs her students to measure out 50.0 mL of hydrogen
peroxide for three trials of an experiment. A student measures out 37.2 mL,
38.7 mL, and 36.9 mL.
Use this information to answer the questions below (1a and 1b).
3 points
1a. Calculate the percent error for each measurement and include them
below. (For example: 1%, 2%, 3%) *
Answer:
by measuring the teacher gets to 1590
Explanation:
ndnmv drf
Please help me with this I’ve been on this question for 10 minutes now...
Answer:
A
Explanation:
we know that pangea was when all the continents were connected and the tectonic plates moved, causing pangea to split into multiple pieces. so north america was formed by moving tectonic plates.
i hope this helps :))
As part of a chemistry experiment, Sam notes that the temperature at which liquid mercury
freezes into a solid is -102 Fahrenheit (F). The beaker of liquid mercury provided to him Is
at a room temperature of 68". By how many degrees will Sam have to cool the liquid
mercury for it to freeze into a solid?
-102"F
-34°F
102°F
170°F
o
Answer:
-34¨F
Explanation:
When copper is bombarded with high-energy electrons, X rays are emitted. Calculate the energy (in joules) associated with the photons if the wavelength of the X rays is 0.154 nm.
Answer:
E = 12.92 × 10^(-16) J
Explanation:
Formula for energy is;
E = hc/λ
Where;
h is Planck's constant = 6.63 x 10^(-34) J.s
c is speed of light = 3 × 10^(8) m/s
λ is wavelength = 0.154 nm = 0.154 × 10^(-9) m
E = (6.63 x 10^(-34) × 3 × 10^(8))/(0.154 × 10^(-9))
E = 12.92 × 10^(-16) J
The energy associated with the photons of X rays with a wavelength of 0.154 nm is 1.29 × 10⁻¹⁵ J.
When copper is bombarded with high-energy electrons, X rays, with a wavelength of 0.154 nm (λ) are emitted.
We can calculate the energy (E) associated with the photons of these X rays using the Planck-Einstein relation.
[tex]E = \frac{h \times c }{\lambda } = \frac{(6.63 \times 10^{-34}J.s ) \times (3.00 \times 10^{8}m/s ) }{0.154 \times 10^{-9} m } ]= 1.29 \times 10^{-15} J[/tex]
where,
h: Planck's constantc: speed of lightThe energy associated with the photons of X rays with a wavelength of 0.154 nm is 1.29 × 10⁻¹⁵ J.
Learn more: https://brainly.com/question/2058557
Ben makes five paper helicopters with different wing lengths. He drops them the same way from a height of two meters for five trials each. He records the amount of time it takes for each helicopter to fall to the ground. What is the independent variable?
Answer:
Wing length
Explanation:
According to the given excerpt, independent variable is 'wing length' and dependent variable is 'amount of time it takes for helicopter to hit the floor'.
Independent variable refers to the variable that do not undergo any change or shift in the course of the experiment of research. The other variables are measured using the constant independent variable. The value obtained from the independent variable is independent. On the other and, the dependent variable witnesses change with respect to the independent variable.
1Which statement about plant cells is true? A A plant cell cannot contain both a nucleus and chlorophyll. Incorrect answer B A plant cell can contain both chlorophyll and a nucleus. Incorrect answer C A plant cell must contain chlorophyll, but can have no nucleus. Incorrect answer D A plant cell has neither a nucleus nor chlorophyll.
Answer:
B A plant cell can contain both chlorophyll and a nucleus.
Explanation:
All plants are eukaryotic organisms i.e the cells of all plants possess a membrane-bound nucleus that houses their genetic material (DNA). In addition to this, most plant cells also contain a unique organelle called CHLOROPLAST, which they use to capture the energy from sunlight in order to perform a process called PHOTOSYNTHESIS.
According to this question, plant cells can contain both chlorophyll and a nucleus. They can possess chlorophyll because chlorophyll is a pigment in their chloroplast that captures the light energy.