HELP!!!!!....... Iron oxide reacts with carbon monoxide to produce iron and carbon dioxide, with the balanced chemical equation Fe2O3 + 3CO —> 2Fe + 3CO2. What does this tell you about the relative amounts of iron oxide and iron consumed and produced in this equation?
A. For every two moles of iron oxide consumed, one mole of iron is produced,
B. For every two grams of iron oxide consumed, one gram of iron is produced.
C. For every gram of iron oxide consumed, two grams of iron are produced
D. For every mole of iron oxide consumed, two moles of iron are produced.
Answer:D
Explanation: There is one mole of Iron Oxide on the reactants side(left) and two moles of iron on the products side (right).
What is the mass of 4.5 moles of sodium fluoride?
The scientific method
A.is a recipe for doing science
B.will always give the right answer
C.is a systematic approach to the study of phenomena
D.involves preconceived ideas
Answer:
A. Is a recipe for soing science
Explanation:
A scientific method is a procedure for conducting science experiments, its almost like a recipe for a science experiment.
What force on Earth can affect the pull of gravity?
Objects with more mass have more gravity. Gravity also gets weaker with distance. So, the closer objects are to each other, the stronger their gravitational pull is. Earth's gravity comes from all its mass.
Answer:
the moon or the sun
Explanation:
HELP! WILL GIVE BRAINLIEST DUE SOON
Dome Mountains are formed when:
A: plateaus are eroded away
B: faults rub against each other
C: magma escapes from the crust
D: magma pushes up sedimentary rock
Answer:
I am not the best to answer this but I think it would be B
Explanation:
Please put them in order for 15 points
Answer:
I forgot that but I think boron is first d ff\
Explanation:
Calculate the change in temperature of a 650. g sample of water that loses 5480. J of energy
Answer:
2
Explanation:
1) the formula of the energy is:
E=cm*Δt, where E - the value of the energy (5480 J.), c - the specific heat capacity (4200 J/(kg*C)), Δt - the difference between initial temperature and the final one (it is unknown);
2) if to perform the substitution of the values 'E', 'm' and 'c' into the formula above, then
5480=4200*0.65*Δt;
3) to calculate Δt:
Δt=5480/4200/0.65≈2 (°C).
note: the initial temperature is higher than the final.
Argon has three naturally-occurring isotopes: 99.6% of 40Ar, with an atomic weight of 39.9624 amu, 0.337% of 36Ar, with an atomic weight of 35.9676 amu, and 0.063% of 38Ar, with an atomic weight of 37.9627 amu. Calculate the average atomic weight of Ar. Round off the answer to six significant figures. Do not include the units.
Answer:
39.9477amu is the average atomic weight of Argon
Explanation:
The average atomic weight is defined as the sum of the products of the atomic weight of each isotope times its abundance. For the Argon the average atomic weight, X is:
[tex]X = 0.996*^{40}Ar + 0.00337*^{36}Ar+0.00063*^{38}Ar[/tex]
[tex]X = 0.996*39.9624amu + 0.00337*35.9676amu+0.00063*37.9627amu[/tex]
X = 39.9477amu is the average atomic weight of Argon
Select the correct answer
Which hand is negatively charged?
Option B is the correct answer .
What is Charge ?
Charge is a basic property of matter that is associated with the presence or absence of electrons. Objects can have positive or negative charge, or they can be neutral, which means they have an equal number of positive and negative charges. In physics, charge is one of the fundamental concepts used to explain the behavior of matter and energy in the universe. The interaction between charges is described by Coulomb's law, which states that the force between two charges is proportional to the product of their charges and inversely proportional to the square of the distance between them.
To learn more about the Charge , click the given link ; https://brainly.com/question/25922783
#SPJ1
2. How do you find the density of a substance given its mass and volume? Write the equation.
Density =
Answer:Density, mass of a unit volume of a material substance. The formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is commonly expressed in units of grams per cubic centimetre.
Explanation:
double displacement reaction - write the balanced conventional, total ionic and net ionic equations:
Ca I2 (aq) + K2 C2 O4 (aq) >
Answer:
See explanation.
Explanation:
Hello!
In this case, these three equations show how the molecule behaves in terms aqueous and solid species; thus, we first write balanced conventional equation:
[tex]Ca I_2 (aq) + K_2 C_2 O_4 (aq)\rightarrow CaC_2O_4(s)+2KI(aq)[/tex]
Whereas the solid product is CaC₂O₄ based off its low solubility. Next, we ionize the aqueous species to obtain the total ionic equation:
[tex]Ca^{2+} +2I^- + 2K^+ +(C_2 O_4)^{2-} \rightarrow CaC_2O_4(s)+2I^- + 2K^+[/tex]
Finally, we cancel out potassium and iodide ions as they are the spectator ions due to their presence at both reactants and products in order to obtain the net ionic equation:
[tex]Ca^{2+} (aq) +(C_2 O_4)^{2-}(aq) \rightarrow CaC_2O_4(s)[/tex]
Best regards!
Which atom is oxidized in the reaction of benzhydrol with bleach?
Answer:
Which atom is oxidized in the reaction of benzhydrol with bleach?
Explanation:
n this experiment, students will perform a simple oxidation reaction of a secondary
alcohol. Recall that Oxidation Is a Loss of electrons while Reduction Is a Gain of electrons (OIL
RIG). In order to apply this mnemonic, you must know the oxidation states of each atom within
the compound, with particular interest on carbon. Carbon can carry oxidation states ranging
from -4 to +4. A few examples are shown in Figure 1 below. It is also common for carbon to
carry an oxidation state of -3, -1, +1, and +3.
Figure 1. Examples of carbon’s oxidation levels.
You may have noticed that all of the compounds in Figure 1 are neutral and carbon has
zero formal charge in each example. The concept of oxidation state and formal charge are
similar with one important difference in the calculation. Both are calculated by taking the
difference between the valence electrons (from the periodic table) and the number of electrons
belonging to that atom within the molecule. For a given atom, the valence electrons will never
change but the electrons ‘belonging’ the atom in the molecule will vary depending on number of
lone pairs and attachments to more or less electronegative atoms. The important difference in
the calculation of oxidation states and formal charge is based on the following assignment of
bonding electrons (Figure 2). This is how the highlighted carbon in ethanol can have an
oxidation state of -1 but a formal charge of zero.
- Oxidation states assign bonding electrons to the more electronegative atom in a bond,
except when the two atoms are the same and the bonding electrons are split equally.
Answer:
so the reaction would probably would be a chemical reaction
"When benzophenone reduces to diphenylmethanol, leftover products include the CH2OH and NaBH3 species. The energetic CH2OH and NaBH3 quickly bond to give (CH2OH)H3B-Na+. This complex is the main second product of benzophenone reduction."
Reactant Ratios
"In life, four benzophenone molecules react with each BH4 complex. Since four benzophenone molecules each attract a hydrogen atom from the “BH4” hydrogen donor, four “CH2OH”s bond with each boron (B) atom. Realistically, the secondary product is (CH2OH)4B-Na+ and four diphenylmethanol molecules. Focusing on one benzophenone molecule at a time is helpful for explaining and understanding reaction steps."
i hope it helps
=>
which metals take part in chemical reactions when exposed to the air?
Answer:
sodium metal take part when exposed to air
Using the equation below, how many liters of water can be made from 7.6 L of oxygen gas at STP?
Answer:
V = 15.2 L
Explanation:
STP means that T = 273 K and P = 1 atm.
We use the PV=nRT equation to convert the given liters of oxygen to moles:
1 atm * 7.6 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 273 Kn = 0.340 molNow we convert O₂ moles to H₂O moles, using the stoichiometric coefficients of the equation:
0.340 mol O₂ * [tex]\frac{2molH_2O}{1molO_2}[/tex] = 0.68 mol H₂OFinally we use the PV=nRT equation once again to convert 0.68 moles of H₂O to liters:
1 atm * V = 0.68 * 0.082 atm·L·mol⁻¹·K⁻¹ * 273 KV = 15.2 LSomeone answer this question by me
I'm giving 100 points for that question
https://brainly.com/question/21777272
If you don't want to get reported and want brainiest, answer the question and don't just spam some random things. I really need help with this that's why I'm giving so many points
Answer:
Uiiikjhb+2
Explanation:
I’m gonna swinggggggf
Why is nitro group called an ambident group?
Answer:
An ambident ("both teeth") group is a group that can attach to another by either of two atoms. A nitro group can bond through either N or O. In organic chemistry, this property gives rise to functional group isomers.
Explanation:
Explanation:
An ambident ("both teeth") group is a group that can attach to another by either of two atoms. A nitro group can bond through either N or O. In organic chemistry, this property gives rise to functional group isomers.
Hope this is fine for you☺️☺️☺️Everything in the universe that we can detect is either matter or ___________.
Answer:
Everything in the universe that we can detect is either matter or energy.
Everything in the universe that we can detect is either matter or energy.
What is energy?Energy exists in the capacity of a physical system to do work. The common symbol for energy exists in the uppercase letter E. The standard unit stands for the joule, symbolized by J. One joule (1 J) exists as the energy resulting from the equivalent of one newton (1 N) of force operating over one meter (1 m) of displacement.
A matter is referred as a substance having a certain mass and can take up a certain volume in the space. For example pen, pencil, toothbrush, water, milk are matters as well as car, bus, bicycle is also a matter. So matter is considered as a living thing and a non-living thing.
Energy, is the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other various forms.
To learn more about energy refer to:
https://brainly.com/question/23490755
#SPJ2
) An organic chemistry lab book gives the following solubility data for oxalic acid 9.5g/100ml water 23.7g/100ml ethanol 16.9g/100ml ether (a) A 14CL student has 40 g of oxalic acid in 1000ml of water and wishes to extracted into an organic solvent for further experiments. Which solvent should the student use for the extraction
Answer:
Ethanol
Explanation:
Solvent extraction is the process in which a compound transfers from one solvent to another owing to the difference in solubility or distribution coefficient between these two solvents(Science Direct).
We have to remember that oxalic acid will be extracted better into a solvent in which it is more soluble. From the data given; oxalic acid is more soluble in ethanol than in ether.
This simply means that ethanol is a better solvent for extracting oxalic acid from water when compared to ether.
A reactive metal that burns with oxygen and makes a white bright light is?
sodium
iron
magnesium
copper
Answer:
it is magnesium hope it helps
Please write a essay and pick one prompt and at least half a page long thank you!
1. What are the physical and chemical properties of metals? Describe the carrot sticks of each and what each means.
2. Explain the difference between chemical and physical changes. Give to real-world examples of each.
2-Methyl-2-pentanol can be made starting from two different ketone electrophiles using two different Grignard reagents: one from a lower molecular mass Grignard reagent and one from a higher molecular mass Grignard reagent. Provide the retrosynthetic analysis for both routes using bromine as the halogen.
Answer:
Explanation:
In this case, we can do this by thinking a little.
Both ways use a grignard reagent, the difference between both ways is that one use an electrophile ketone with a low molecular mass, and the other has a high molecular mass.
The grignard reagent is commonly used to reduce carbonyle groups to alcohols. In the first step, a complex with the reagent is formed in the carbonile, and in the second step, the oxygen atom is hidrated in acid or basic medium and form the respective alcohol.
For the first way, we will use a high molecular mass ketone. In this case the 2-pentanone reacting with CH₃MgBr as a grignard reagent.
For the second way, we will use a low molecular mass ketone, in this case Acetone, reacting with CH₃CH₂CH₂MgBr. Both of them, will give the same product of 2 methyl-2-pentanol. See picture below for that
Hope this helps
Which of the following is a type of kinetic energy.
A. A television playing.
B. Magnets stuck to each other.
C. A car parked at the top of a hill.
D. A rolling ball.
Answer:
a rolling ball
Explanation:
kinetic energy is movement energy
What is the Molar Mass of Iron(Fe)? and also state how many particles there are in one mole of iron.
A white light shined onto a green brick bricks science
Answer:what’s the question?
Explanation:
1. Convert each of the following Celsius temperatures to Kelvin. a) 27°C b) 100°C c) 0°C
Answer:
a) 300K
b) 373K
c) 273K
Explanation:
to go from °C to K all you have to do is add 273.
Intermolecular forces exist between what?
Answer:
Intramolecular forces are the forces that hold atoms together within a molecule. Intermolecular forces are forces that exist between molecules.
Explanation:
Why is it important to keep detailed records and notes about evidence and the crime scene
Answer:
It is important to record the crime scene in order to view how it was originally found so when items are removed, it can still be investigated and viewed.
Explanation:
I need help please on chemistry
Butane gas reacts with oxygen gas to give carbon dioxide gas and water vapor (gas). If you mix butane and oxygen in the correct stoichiometric ratio, and if the total pressure of the mixture is 392 mmHg, what is the pressure (in mmHg) of water vapor after the reaction has completed (temperature and volume do not change).
Answer:
118.776 mmHg
Explanation:
The equation of the reaction is;
C4H10(g) + 13/2 O2(g) ------> 4CO2(g) + 5H20(g)
Now the mole ratio according to the balanced reaction equation is;
1 : 6.5 : 4 : 5
Hence, the total number of moles present = 1 + 6.5 + 4 + 5 = 16.5 moles
Mole fraction of water vapour = 5/16.5 = 0.303
We also know that;
Partial pressure= mole fraction * total pressure
Partial pressure of H20(g) = 0.303 * 392 mmHg = 118.776 mmHg
The pressure (in mmHg) of water vapor is 118.78 mmHg
Balanced equation for the reaction
Butane reacts with oxygen according to the following equation
2C₄H₁₀ + 13O₂ —> 8CO₂ + 10H₂O
How to determine the mole fraction of water Mole of butane = 2 moles Mole of oxygen = 13 molesCarbon (IV) oxide = 8 moles Mole of water = 10 moles Total moles = 2 + 13 + 8 + 10 = 33 moles Mole fraction of water =?Mole fraction = mole / total mole
Mole fraction of water = 10 / 33
Mole fraction of water = 0.303
How to determine the partial pressure of waterMole fraction of water = 0.303Total pressure = 392 mmHgPartial pressure of water =?Partial pressure = mole fraction × total pressure
Partial pressure of water = 0.303 × 392
Partial pressure of water = 118.78 mmHg
Learn more about partial pressure:
https://brainly.com/question/15577259
How many grams of hydrogen are produced when 125 g of iron reacts with 125 g of water?
3 Fe + 4H2O ---> Fe3O4 + 4H2
5.95g
13.89g
111.11g
119.10g