Which source of bias is most relevant to the following situation: Both members of a couple are asked to indicate if they have remained monogamous in their currently relationship self-interest study voluntary response blas nonrespolse bias or missing data perceived lack of anonymity loaded or leading question

The terminal point is (4,-14), so we draw a line from the origin to (4,-14) and then draw a vector from the origin to the terminal point of the resultant vector.

We are given two vectors u and v, and we are asked to find u+v, u-v, and 3u-4v, and then sketch each resultant vector.

u = 4,2 and v = 2,5

u+v = (4+2,2+5) = (6,7)

u-v = (4-2,2-5) = (2,-3)

3u-4v = 3(4,2) - 4(2,5) = (12,6) - (8,20) = (4,-14)

To sketch each resultant vector, we plot the initial point at the origin and then draw a line to the terminal point of each vector. Then, we draw a vector from the origin to the terminal point of the resultant vector.

For u+v, the terminal point is (6,7), so we draw a line from the origin to (6,7) and then draw a vector from the origin to the terminal point of the resultant vector.

For u-v, the terminal point is (2,-3), so we draw a line from the origin to (2,-3) and then draw a vector from the origin to the terminal point of the resultant vector.

For 3u-4v, the terminal point is (4,-14), so we draw a line from the origin to (4,-14) and then draw a vector from the origin to the terminal point of the resultant vector.

Learn more about terminal point here

https://brainly.com/question/14435471

#SPJ11

The error that she made will be corrected by the step Multiply both sides by -5/2 instead of -2/5.

The given equation is -2/5(10x-15)=-30.

To solve this equation the friend multiplied (-2/5) on both sides and got a result of 10x-15 = -30(-2/5).

Which is an error because of the left side -2/5 is not cancelled but it is multiplied with 2/5 on left side.

So to correct this error Multiply both sides by -5/2 instead of -2/5.

-5/2×-2/5(10x-15)=-30(-5/2)

10x-15=75

Now we can solve for x easily.

To learn more on Equation:

https://brainly.com/question/10413253

#SPJ1

In this case, the number of successes is the number of defective bulbs and the probability of success is 3/75 or 0.04.

The probability model can be expressed as follows: X ~ B(75, 0.04), where X is the number of defective bulbs in a sample of 75 bulbs, and B(75, 0.04) denotes a binomial distribution with 75 trials and a probability of success of 0.04. The probability of observing k defective bulbs can be calculated using the probability mass function of the binomial distribution: P(X = k) = (75 choose k) * 0.04^k * 0.96^(75-k), where (75 choose k) represents the number of ways to choose k defective bulbs out of 75.
Using this probability model, we can calculate the probabilities of various events, such as the probability of having no defective bulbs (P(X = 0)), the probability of having exactly one defective bulb (P(X = 1)), the probability of having at least one defective bulb (P(X >= 1)), and so on.

Learn more about probability model here:-brainly.com/question/31197772

#SPJ11

In this case, the number of successes is the number of defective bulbs and the probability of success is 3/75 or 0.04.

The probability model can be expressed as follows: X ~ B(75, 0.04), where X is the number of defective bulbs in a sample of 75 bulbs, and B(75, 0.04) denotes a binomial distribution with 75 trials and a probability of success of 0.04. The probability of observing k defective bulbs can be calculated using the probability mass function of the binomial distribution: P(X = k) = (75 choose k) * 0.04^k * 0.96^(75-k), where (75 choose k) represents the number of ways to choose k defective bulbs out of 75.

Using this probability model, we can calculate the probabilities of various events, such as the probability of having no defective bulbs (P(X = 0)), the probability of having exactly one defective bulb (P(X = 1)), the probability of having at least one defective bulb (P(X >= 1)), and so on.

Learn more about probability model here:-brainly.com/question/31197772

#SPJ11

Light travels approximately 1 foot in 1 nanosecond (ns). Therefore, the correct answer is "about 1 ft."

The speed of light in a vacuum is approximately 299,792,458 meters per second (m/s). In one nanosecond, light can travel approximately 0.3 meters or 1 foot. This distance may seem small, but it is incredibly fast when considering the scale of time. The fact that the contestant did not know the answer to this question highlights the importance of understanding basic scientific concepts and units of measurement.

To put it in perspective, if you were to travel at the speed of light, you could go around the Earth's equator approximately 7.5 times in just one second. The speed of light is also used as a unit of measurement in astronomy, where distances are so vast that traditional units like miles or kilometers are insufficient.

To learn more about vacuum : brainly.com/question/29242274

#SPJ11

For the given right triangle with side lengths d, e, and f, the values of sin(x), tan(x), and cos(x) are 0, 0, and 1, respectively.

In a right triangle, the side opposite the right angle is called the hypotenuse. Let's assume that f represents the length of the hypotenuse. From the information given, we can infer that sin(x) = 0, which means that the ratio of the length of the side opposite angle x (d) to the hypotenuse (f) is 0. This implies that d = 0.

Similarly, we are given that tan(x) = 0, which indicates that the ratio of the length of the side opposite angle x (d) to the side adjacent to angle x (e) is 0. Therefore, d = 0.

Finally, we have cos(x) = 1, indicating that the ratio of the length of the side adjacent to angle x (e) to the hypotenuse (f) is 1. This implies that e = f.

To summarize, in the given right triangle, sin(x) = 0, tan(x) = 0, and cos(x) = 1, with the side lengths d = 0, e = f.

Learn more about right triangle here:

https://brainly.com/question/30966657

#SPJ11

Answer:

4/3

Step-by-step explanation:

Divide 1 by 3/4 to find out how many groups.

1 divided by 3/4 is 4/3

The model yi = β1 + β2xi ui is a linear regression model that describes the relationship between a response variable yi and a predictor variable xi. In this model, β1 and β2 are the intercept and slope coefficients, respectively, while ui represents the error term.

The fitted value ˆyi is the predicted value of yi based on the linear regression model. It is calculated as the sum of the intercept and the product of the slope coefficient and the predictor variable: ˆyi = β1 + β2xi.

Know more about the linear regression

https://brainly.com/question/25987747

#SPJ11

Thus, the only value of k for which the vectors u and v are orthogonal is k = 0.

Orthogonal vectors are vectors that have a dot product of zero. The dot product is a mathematical operation that takes two vectors and returns a scalar. It is also known as the inner product or the scalar product.

The dot product of two vectors is equal to the product of their magnitudes and the cosine of the angle between them. If two vectors are orthogonal, their dot product is zero because the cosine of 90 degrees is zero.

To determine the values of k for which the two vectors u and v are orthogonal, we need to use the dot product formula. The dot product of two vectors is equal to the product of their magnitudes and the cosine of the angle between them. If two vectors are orthogonal, their dot product is zero.

Therefore, we need to find the value of k that makes the dot product of u and v equal to zero.

The dot product of u and v is given by:
u · v = (1)(k) + (-17)(2k) + (0)(-8) = k - 34k = -33k
Setting u · v equal to zero and solving for k, we get:
-33k = 0
k = 0

Therefore, the only value of k for which the vectors u and v are orthogonal is k = 0.


Know more about the Orthogonal vectors

https://brainly.com/question/30772550

#SPJ11

x = 0 is a point of change in curvature for the function g(x) = 4x|x|.

The given function is g(x) = 4x|x|.

The first derivative of g(x) is:

g'(x) = 4|x| + 4x * d/dx (|x|)

= 4|x| + 4x * sgn(x)

where sgn(x) is the sign function that equals 1 if x > 0, -1 if x < 0, and 0 if x = 0.

The second derivative of g(x) is:

g''(x) = 4 * d/dx (|x|) + 4 * sgn(x) + 4x * d^2/dx^2 (|x|)

= 4 * sgn(x) + 4 * δ(x)

where δ(x) is the Dirac delta function that equals infinity at x = 0 and 0 elsewhere.

Since the second derivative of g(x) does not exist at x = 0, g(x) has no inflection point at x = 0.

However, we can see that g(x) changes from concave down to concave up at x = 0, which is a point of interest. At x < 0, g(x) is a downward-facing parabola, while at x > 0, g(x) is an upward-facing parabola. Therefore, we can say that x = 0 is a point of change in curvature for the function g(x) = 4x|x|.

Learn more about curvature here

https://brainly.com/question/30114042

#SPJ11

The height of the trapezoid is 14 units.

We need to find the height of a trapezoid which has given lengths of its bases and the area.

Area = (1/2) × (sum of the bases)×height

The area is given as 518, and the lengths of the bases are 30 and 44.

Plug in these values.

518 = (1/2) × (30 + 44) × height

518 = (1/2) × 74 × height

Now, let's solve for the height:

518 = 37 × height

Divide both sides by 37:

height = 518 / 37

height = 14

Therefore, the height of the trapezoid is approximately 14 units.

To learn more on Area click:

https://brainly.com/question/20693059

#SPJ1

As the degrees of freedom increase, the t distribution b. approaches the normal distribution, which is a key assumption in many statistical tests. Understanding this relationship is important for making accurate statistical inferences and drawing valid conclusions from data.

The t distribution is a probability distribution that is commonly used in hypothesis testing. It is similar to the normal distribution but with heavier tails. As the degrees of freedom increase, the t distribution approaches the normal distribution. This means that the shape of the t distribution becomes more and more like the normal distribution as the sample size increases.
The reason for this is that the t distribution is based on the sample mean, which becomes more normally distributed as the sample size increases due to the central limit theorem. As the sample size increases, the standard error of the mean decreases, and the t distribution becomes less spread out and more peaked. This is why we use the t distribution instead of the normal distribution when we have a small sample size.

To learn more about normal distribution, refer:-

https://brainly.com/question/15103234

#SPJ11

By factorials, the values of variables x and y are 2 and 1560, respectively.

In this problem we need to find the values of the variables x and y derived from the multiplication of 38 fractions, whose definition is done by the following expression involving factorials:

n! / [(n + 2)! / 2!] = x / y

2 · n! / (n + 2)! = x / y

2 / [(n + 1) · (n + 2)] = x / y

If we know that n = 38, then the values of x and y are, respectively:

x = 2

y = 39 · 40

y = 1560

To learn more on factorials: https://brainly.com/question/13924885

#SPJ1

This statement makes sense. When randomly selecting a day of the week, there are seven possible outcomes, each containing the letter y (Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday).

Therefore, the probability of selecting a day containing the letter y is 1. It is important to note that the statement does not imply that the probability of selecting any specific day of the week is 1, only that the probability of selecting a day containing the letter y is 1.
When randomly selecting a day of the week, it is not certain that one will select a day containing the letter "y". There are 7 days in a week, and only 3 of them contain the letter "y" (Monday, Tuesday, and Sunday). To find the probability of selecting a day with the letter "y" (P(y)), divide the number of days containing "y" (3) by the total number of days in a week (7). So, P(y) = 3/7, which is not equal to 1. The statement would only make sense if all the days contained the letter "y".

To learn more about week: brainly.com/question/31596416

#SPJ11

Answer:

  y ≥ 2x +1

Step-by-step explanation:

You want the inequality whose graph is shown.

The line has a rise of 2 units for each 1 to the right, so its slope is ...

  m = rise/run = 2/1 = 2

The line crosses the y-axis at y = 1, so the y-intercept is ...

  b = 1

The boundary line is ...

  y = mx + b

  y = 2x + 1

The shading is above the solid line, so the inequality symbol is ≥.

The inequality for the graph is ...

  y ≥ 2x +1

<95141404393>

The sample size 24 and sample proportion (p) is 0.5 will be a normal curve be used to approximate the sampling distribution

The condition for a normal curve to be used to approximate the sampling distribution is that the sample size should be large enough such that both np and n(1-p) are greater than or equal to 10.

Let's check the options one by one:

n = 24; p = 0.5

Here, np = 24 x 0.5 = 12 and

n(1-p) = 24 x 0.5 = 12

Both of which are greater than or equal to 10.

So, a normal curve can be used to approximate the sampling distribution.

n = 20, p = 0.6

n×p = 12, n×(1-p) = 8, so a normal curve cannot be used.

C. n = 24, p = 0.4: n × p = 9.6, n ×(1-p) = 14.4, so a normal curve cannot be used.

D. n = 20, p = 0.3: n × p = 6, n×(1-p) = 14, so a normal curve cannot be used.

Therefore, the sample size is 24 and sample proportion (p) is 0.5 will be a normal curve be used to approximate the sampling distribution

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ1

The range of exponential function g is y > -6

From the question, we have the following parameters that can be used in our computation:

The graph of the function g

The range of exponential function g is the set of y values the graph can take

From the graph, we can see that the minimum y value is

Minimum = -6

This means that the range is y > =6

Hence, the range of exponential function g is y > -6

Read mroe about range at

https://brainly.com/question/27910766

#SPJ1

Complete question

What is the range of exponential function g?

The graph is attached

Veronica should produce 9 teapots to maximize profit (or minimize loss) in the current equilibrium market.

To determine the profit-maximizing quantity of teapots to produce, Veronica needs to compare the marginal cost (MC) and marginal revenue (MR) of producing each additional teapot.

Assuming Veronica's cost function is C(q) = 2q + 5, where q is the quantity of teapots produced, we can derive the equations for MR and MC as follows:

MR = dTR/dq

MR = d/dq(P(q) * q)

MR = d/dq((20 - q) * q)

MR = 20 - 2q

MC = dC/dq

MC = d/dq(2q + 5)

MC = 2

To find the profit-maximizing quantity of teapots, we need to set MR equal to MC and solve for q:

20 - 2q = 2

18 = 2q

q = 9

Therefore, Veronica should produce 9 teapots to maximize profit (or minimize loss) in the current equilibrium market.

Learn more about :

equilibrium market : brainly.com/question/30692864

#SPJ11

Answer:

------------------

Find the time in travel in both directions, show their difference, considering the distance is 224  and the original speed is s:

Multiply both sides by 5s(s + 10)/2 and simplify to get quadratic equation:

The second root is negative and hence is discarded, hence the answer is 70 mph.

A transformation of Figure 1 results in Figure 2 will be rotation.

Picture, after translation, refers to the object's ultimate organization and placement.

Rotation does not change the shape and size of the geometry. But changes the orientation of the geometry.

Rotation in math involves rotating a figure around a fixed point by a certain angle. This can be done clockwise or counterclockwise and is typically measured in degrees.

Figure 1 is rotated to form Figure 2.

More about the transformation of the shape link is given below.

https://brainly.com/question/27224339

#SPJ1

The derivative of y = ln(x) is y' = 1/x. Taking the second derivative, we have y'' = -1/x^2.

To find the derivative of y = ln(x), we can use the basic differentiation rule for logarithmic functions. The derivative of ln(x) with respect to x is 1/x. Therefore, the first derivative of y = ln(x) is y' = 1/x.

To find the second derivative, we need to differentiate y' = 1/x with respect to x. Applying the differentiation rule for 1/x, we obtain y'' = -1/x^2.

The second derivative y'' = -1/x^2 indicates the rate of change of the slope of the original function y = ln(x). It tells us how quickly the slope of the function is changing at each point.

Since the derivative of y' is negative, it means that the slope of y' is decreasing as x increases. In other words, as x gets larger, the rate of change of the slope becomes smaller and smaller.

In summary, the derivative of y = ln(x) is y' = 1/x, and the second derivative is y'' = -1/x^2.

These derivatives help us understand the behavior of the logarithmic function and provide information about its rate of change and concavity.

To know more about logarithmic click here

brainly.com/question/31117877

#SPJ11

The correct graph to the exponential function f(x) = (1/2)ˣ is attached accordingly.

Exponential Growth - The function represents exponential growth because the base (1/2) is between 0 and 1. As x increases, the function values get smaller but remain positive.

Y-Intercept  - The function intersects the y-axis at y = 1, meaning that when x = 0, the value of f(x) is 1.

Asymptote  - The function approaches but never reaches the x-axis (y = 0) as x approaches negative infinity. This is because the base (1/2) is a fraction less than 1.

Decreasing Function   -  The function is decreasing as x increases. This is because the base (1/2) is less than 1, causing the exponent to be negative, resulting in smaller values for f(x) as x increases.

Learn more about exponential functions:
https://brainly.com/question/29287497
#SPJ1

The non-zero entries in vector v are 1s in positions 2, 3, 5, 6, and 7. Thus, the Hamming norm of vector v is 5.

The Hamming norm of a vector is the number of non-zero entries in the vector. In other words, it measures the number of positions in the vector where the entry is not zero.

For vector u, we have:

u = [1 0 1 1 0 0 1]^T

The non-zero entries in vector u are 1s in positions 1, 3, 4, and 7. Thus, the Hamming norm of vector u is 4.

For vector v, we have:

v = [0 1 1 0 1 1 1]^T

The non-zero entries in vector v are 1s in positions 2, 3, 5, 6, and 7. Thus, the Hamming norm of vector v is 5.

Therefore, the Hamming norm of u is 4 and the Hamming norm of v is 5. This tells us that vector v has more non-zero entries than vector u. In general, the Hamming norm is a useful way to compare the "sparsity" of different vectors, i.e., how many entries are zero versus non-zero. Vectors with lower Hamming norms are typically more sparse, while vectors with higher Hamming norms are more dense.

Learn more about vector at: brainly.com/question/29740341

#SPJ11

There is only one semisimple c-algebra of dimension 9, up to isomorphism, and that is the algebra M3(C) of 3x3 matrices over the complex numbers.

In general, a c-algebra is semisimple if and only if it is a direct sum of matrix algebras over division rings. The dimension of a c-algebra is defined as the dimension of its underlying complex vector space.

So, for a semisimple c-algebra of dimension 9, we need to find all possible direct sums of matrix algebras over division rings whose dimensions multiply to 9. The only possible division rings are C and R, and the only possible dimensions for the matrix algebras are 1, 2, 3. After checking all possible combinations, we find that the only direct sum that works is M3(C), which is a semisimple c-algebra of dimension 9. Therefore, there is only one semisimple c-algebra of dimension 9, up to isomorphism.

To know more about semisimple c-algebra visit:

https://brainly.com/question/30080239

#SPJ11

If y1 and y2 are linearly independent solutions of the equation t^2y'' + 3ty' + 5y = 0 and the Wronskian w(y1, y2)(1) = 2, you want to find w(y1, y2)(4) rounded to two decimal places.

Using Abel's Identity, we know that the Wronskian is constant for linearly independent solutions of a homogeneous linear differential equation with variable coefficients. So, w(y1, y2)(t) = w(y1, y2)(1) = 2 for all t.

Therefore, w(y1, y2)(4) = 2. In decimal form, the answer is 2.00.

To know more about decimal visit :-

https://brainly.com/question/28393353

#SPJ11

Answer:

Answer for 13. :

[tex]\frac{1}{3}[/tex] ft

Answer for 14. :

[tex]162\sqrt{2}[/tex] - 81 cm^2

Answer:

13)  8.7 ft²

14)  114.6 cm²

Step-by-step explanation:

The area of the shaded region can be calculated by subtracting the area of the hexagon from the area of the circle.

The formulas for the area of a circle and the area of a regular hexagon are:

[tex]\boxed{\begin{minipage}{3.9 cm}\underline{Area of a circle}\\\\$\vphantom{\dfrac{3\sqrt{3}}{2} }A=\pi r^2$\\\\where $r$ is the radius.\\\end{minipage}}[/tex]   [tex]\boxed{\begin{minipage}{4.1 cm}\underline{Area of a regular hexagon}\\\\$A=\dfrac{3\sqrt{3}}{2} r^2$\\\\where $r$ is the radius.\\\end{minipage}}[/tex]

The circle and hexagon both have a radius of 4 ft.

Therefore:

[tex]\begin{aligned}\textsf{Shaded area}&=\pi r^2 - \dfrac{3\sqrt{3}}{2}r^2\\\\&=\pi \cdot 4^2 - \dfrac{3\sqrt{3}}{2}\cdot 4^2\\\\&=16\pi - \dfrac{3\sqrt{3}}{2} \cdot 16\\\\&=16\pi - \dfrac{48\sqrt{3}}{2} \\\\&=16\pi - 24\sqrt{3}\\\\&=8.69626307...\\\\&=8.7\; \sf ft^2\end{aligned}[/tex]

Therefore, the area of the shaded region is 8.7 ft² (nearest tenth).

[tex]\hrulefill[/tex]

The shaded region is made up of 4 congruent isosceles triangles.

The apex angle of each triangle is the interior angle of a regular octagon, 135°, and the congruent sides measure 9 cm.

The formula for an isosceles triangle is

[tex]\boxed{\begin{minipage}{8 cm}\underline{Area of an isosceles triangle}\\\\$A=\dfrac{1}{2}s^2 \sin \theta$\\\\where:\\ \phantom{w} $\bullet$ $s$ is the congruent side length.\\\phantom{w} $\bullet$ $\theta$ is the angle between the congruent sides.\\\end{minipage}}[/tex]  

Therefore, the area of the shaded region is:

[tex]\begin{aligned}\textsf{Shaded area}&=4 \cdot \dfrac{1}{2} \cdot 9^2 \cdot \sin 135^{\circ}\\\\&=4 \cdot \dfrac{1}{2} \cdot 81 \cdot \dfrac{\sqrt{2}}{2}\\\\&=2\cdot 81 \cdot \dfrac{\sqrt{2}}{2}\\\\&=162 \cdot \dfrac{\sqrt{2}}{2}\\\\&=81\sqrt{2}\\\\&=114.6\; \sf cm^2\;(2\;d.p.)\end{aligned}[/tex]

Therefore, the area of the shaded region is 114.6 cm² (nearest tenth).

Money is a variable that the central bank controls, we " must then assume as well that the price level is unrelated to the value of money". The correct answer is option 2:

When we assume that the central bank controls the supply of money, we assume that it has the power to adjust the quantity of money in circulation. This assumption, however, implies that the price level is unrelated to the value of money, which is not necessarily true in the real world. Option 1 is incorrect because the demand for money is often influenced by the value of money. Option 3 is incorrect because households, along with banks and other financial institutions, play a role in the creation and supply of money. Option 4 is incorrect because the banking system is a crucial part of the monetary system, and its role cannot be ignored when discussing the supply of money.

Option 2 is answer.

You can learn more about central bank at

https://brainly.com/question/29547955

#SPJ11

The linear regression equation is ŷ = 1.47x - 41.67

The projected test grade is 2.43

From the question, we have the following parameters that can be used in our computation:

The grade (x) and test grade (y) scores

The linear regression equation can be calculated using a graphing tool, where we have the following summary:

The regression equation is

ŷ = bx + a

Where

b = SP/SSX = 463.5/316 = 1.46677

a = MY - bMX = 77.88 - (1.47*81.5) = -41.66693

So, we have

ŷ = 1.47x - 41.67

For the test grade 30, we have

ŷ = 1.47 * 30 - 41.67

Evaluate

ŷ = 2.43

Hence, the projected test grade is 2.43

Read more about linear regression at

https://brainly.com/question/26755306

#SPJ9

Suppose f(x) is a 10th-degree polynomial of the form:

f(x) = x^10 + a9x^9 + a8x^8 + ... + a1x + a0,

where a0, a1, ..., a9 are integers.

Furthermore, suppose f(k) = k(k+1) for every integer k from 1 to 10.

To find the polynomial f(x), follow these steps:

1. Create a system of equations by plugging in the integers k=1, 2, ..., 10 into f(k) = k(k+1).
2. Solve this system of equations to find the coefficients a0, a1, ..., a9.

Since your question is incomplete, I am unable to provide a specific answer, but I hope this explanation helps guide you in solving the problem. If you provide more information, I would be happy to assist you further.

To know more about polynomial visit :

https://brainly.com/question/11536910

#SPJ11

The surface area of the shape formed by joining the two cones is approximately 1256 cm².

To find the surface area of the shape formed by joining two cones, we can calculate the individual surface areas of the cones and add them together.

Each cone has a base radius of 8 cm and a height of 15 cm.

The surface area of a cone consists of two parts: the curved surface area and the base area.

Curved Surface Area of a Cone:

The curved surface area of a cone can be calculated using the formula: π x r x l

where r is the base radius and l is the slant height.

To find the slant height, we can use the Pythagorean theorem:

l = [tex]\sqrt{(r^2 + h^2)}[/tex].

For each cone, the slant height l = [tex]\sqrt{(8^2 + 15^2)}[/tex] = √289 = 17 cm.

The curved surface area of each cone is: π x 8 x 17 = 136π cm².

Base Area of a Cone:

The base area of a cone is given by the formula: π x [tex]r^2[/tex]

For each cone, the base area is: π x [tex]8^2[/tex] = 64π cm².

Now, to find the total surface area of the shape formed by joining the two cones, we add the curved surface areas and the base areas of the cones:

Total Surface Area = 2 x (Curved Surface Area) + 2 x (Base Area)

Total Surface Area = 2 x (136π) + 2 x (64π)

Total Surface Area = 272π + 128π

Total Surface Area = 400π

To get the value to the nearest whole number, we can use the approximation π ≈ 3.14:

Total Surface Area ≈ 400 x 3.14

Total Surface Area ≈ 1256 cm²

For similar questions on surface area

https://brainly.com/question/26403859

#SPJ11

Question -

Two cones with same base radius 8 cm and height 15 cm are joined together along their bases. Find the surface area of the shape so formed (answer to the nearest whole number).

The minimum coefficient of static friction between the plane and the cylinder, for the cylinder not to slip on an inclined plane is "μ ≥ 2/3 tan θ". Option B (μ ≥ 2/3 tan θ) is the correct answer.

When a cylinder is placed on an inclined plane, it tends to slide downwards due to the force of gravity. However, the force of friction acting opposite to the direction of motion prevents it from sliding. The frictional force depends on the coefficient of static friction (μ), which is the ratio of the frictional force to the normal force between the cylinder and the plane. The minimum coefficient of static friction required for the cylinder not to slip is when the frictional force is equal to the maximum force that can be exerted along the plane without causing the cylinder to slip.

This maximum force is given by the product of the weight of the cylinder and the sine of the angle of inclination of the plane (F_max = mg sin θ). Therefore, μ ≥ F_max/N = mg sin θ/N = 2/3 tan θ, where N is the normal force exerted on the cylinder by the plane. Therefore, the minimum coefficient of static friction required is μ ≥ 2/3 tan θ.

Option B is answer.

You can learn more about static friction at

https://brainly.com/question/30031223

#SPJ11