The following statements describe phase changes is particles in a liquid need to move more slowly in order to freeze.
Substances absorb energy when they melt and solidification occurs when the particles lose enough energy to slow down and bond together. In a state of matter, changes occur when temperature or pressure changes. Phase changes involve matter changing from one state to another. A change in a substance's physical form or state is known as a phase change, when water transforms from a liquid to a solid, for example, it is undergoing a phase change. Phase changes, often known as phase transitions, involve the transfer of energy. During a phase change, energy must be added or removed from the system, and this energy is often referred to as latent heat.
In other words, a phase transition is a phenomenon that occurs when a substance alters from one physical state to another. Solid, liquid, and gas are the three physical states of matter, energy must be added to break the bonds between molecules to transform from a solid to a liquid and then from a liquid to a gas. Particles in a liquid need to move more slowly in order to freeze and substances absorb energy when they melt. Solidification occurs when the particles lose enough energy to slow down and bond together. In a state of matter, changes occur when temperature or pressure changes.Phase changes involve matter changing from one state to another.
Learn more about phase transition at:
https://brainly.com/question/3255181
#SPJ11
what is the [hcoo-]/[hcooh] ratio in an acetate buffer at ph 4.50? (the pka for formic acid is 3.80.) [hcoo-]/[hcooh]
The ratio of [HCO₃⁻] to [HCO₂H] in an acetate buffer is 5.01.
The ratio of [HCO₃⁻] to [HCO₂H] (formic acid) in an acetate buffer at pH 4.50 is determined by the Henderson-Hasselbalch equation:
pH = pKa + log ([HCO₃⁻]/[HCO₂H]).
[HCO₃⁻]/[HCO₂H] = 10^(pH-pKa)
= 10^(4.50 - 3.80)
= 5.01
To further understand the buffering capacity of an acetate buffer, we must first understand the role of formic acid and bicarbonate in an acetate buffer.
Formic acid is an organic acid and bicarbonate is a salt of carbonic acid. Both of these species can form and break down as needed to maintain the pH of the buffer.
As the pH of the buffer is increased, the formic acid will break down, forming more bicarbonate.
On the other hand, as the pH of the buffer is decreased, more formic acid will form, resulting in fewer bicarbonate ions.
The buffering capacity of an acetate buffer is dependent on the relative concentrations of formic acid and bicarbonate ions, and these concentrations can vary depending on the pH of the buffer.
In summary, the ratio of [HCO₃⁻] to [HCO₂H] is found to be 5.01 in an acetate buffer at pH 4.50.
To know more about acetate buffer, refer here:
https://brainly.com/question/16970860#
#SPJ11
the freezing-point depression for a given aqueous solution is 0.34 k. the freezing-point depression constant for water is 1.86 k/m. calculate the molality of solutes in the solution.
the molality of solutes in the aqueous solution is 0.182 molal.
Freezing-point depression constant for water ([tex]K_f[/tex]) = 1.86 K/mFreezing-point depression of aqueous solution (Δ[tex]T_f[/tex]) = 0.34 KThe molality of solute in the solution = ?The formula to calculate molality is as follows;m = moles of solute/kilograms of solvent.
⇒m = (molality) = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)
Here, Δ[tex]T_f[/tex] = Freezing-point depression[tex]K_f[/tex] = Freezing-point depression constant for waterw2 = Mass of solvent (Water) in KgWe have to calculate the molality of solutes in the solution by using the freezing-point depression constant and freezing-point depression of the aqueous solution.
Now, Substituting the given values, we get,
⇒ m = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)
⇒ m = 0.34 / (1.86 × w2)
⇒ m = 0.182 molal
Therefore, the molality of solutes in the solution is 0.182 molal.
Learn more about molality: https://brainly.com/question/1370684
#SPJ11
was the weight of nylon a week later very different from the weight of nylon at the end of the lab period? provide a possible explanation.
The most significant commercially produced fibers include nylons.
Weight of nylon Nylon fibers are utilized in toothbrushes and tents, so chances are you've used them. Nylon may, however, be more than just fibers. Self-lubricating bearings and gears are also made with it. Automotive interior elements made of nylon-clay composites are utilized in vehicles.Nylon 6 and Nylon 6 are the two most significant varieties of nylon. Nearly all the features of these two nylons are the same. Both were developed in the late 1930s. First identified was nylon 6,6. Wallace Carothers, a DuPont employee, came up with the idea in the United States. 10 Paul Schlack, who was working for I.G. Farben at the time, soon after created Nylon 6 in Germany.For more information on nylon kindly visit to
https://brainly.com/question/10278626
#SPJ1
write a molecular equation for the gas evolution reaction that occurs when you mix aqueous hydrobromic acid and aqueous lithium sulfite.
The molecular equation for the gas evolution reaction between aqueous hydrobromic acid (HBr) and aqueous lithium sulfite (Li2SO3) is as follows: 2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} So_{3}[/tex] (aq)
In this reaction, hydrobromic acid (HBr) reacts with lithium sulfite ([tex]Li_{2} So_{3}[/tex]) to form lithium bromide (LiBr) and sulfurous acid ([tex]H_{2} So_{3}[/tex]). The sulfurous acid is unstable and decomposes into water( [tex]H_{2o[/tex]) and sulfur dioxide gas ([tex]So_{2}[/tex]):
[tex]H_{2} So_{3}[/tex] (aq) → [tex]H_{2} 0[/tex]l) + [tex]So_{2}[/tex] (g)
The overall reaction is:
2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} o[/tex] (l) + [tex]So_{2}[/tex] (g)
In this gas evolution reaction, the mixing of the two aqueous solutions results in the formation of a new compound, lithium bromide, which remains dissolved in the solution. The other product, sulfurous acid, decomposes into water and sulfur dioxide gas, which is released as bubbles in the solution. This release of gas is the characteristic feature of gas evolution reactions.
Know more about sulfurous acid here:
https://brainly.com/question/1084323
#SPJ11
the electron-domain geometry of a species is the arrangement of electron around the central atom, whereas the molecular geometry is the arrangement of bonded . two species with the same electron-domain geometry may have different molecular geometries, true or false?
The given statement "The electron-domain geometry of a species is the arrangement of electron around the central atom, whereas the molecular geometry is the arrangement of bonded . two species with the same electron-domain geometry may have different molecular geometries" is true as the molecular geometry is arrangement of the bonded atoms.
Electron-domain geometry is the arrangement of the electron pairs around the central atom in the molecule. It is called as the molecular geometry or called the electron-pair geometry.
The Molecular geometry is also known as molecular structure, and is the three -dimensional structure or the arrangement of the atoms in the molecule. The statement is true.
To learn more about geometry here
https://brainly.com/question/18612295
#SPJ4
acetic acid has a ka of 1.80x10-5. what is the ph of a buffer solution made from 0.150 m hc2h3o2 and 0.530 m c2h3o2 -?
Acetic acid has a ka of 1.80x10-5. The pH of a buffer solution made from 0.150 m hc2h3o2 and 0.530 m c2h3o2 is 4.76.
The pH of a buffer solution produced from 0.150 M HC2H3O2 and 0.530 M C2H3O2 is 4.76.
The following are the steps to solve the problem:
Acetic acid is a weak acid with the formula CH3COOH, which is also known as ethanoic acid.
HC2H3O2 is the molecular formula for this substance.
Acetic acid has a Ka of 1.8 x 10-5.
The ionization of acetic acid can be expressed as follows: CH3COOH + H2O ↔ H3O+ + CH3COO-
The ionization constant, Ka, is equal to the product of the concentration of H3O+ and CH3COO- ions divided by the concentration of CH3COOH.
Hence, Ka = ([H3O+] [CH3COO-])/[CH3COOH]
The Henderson-Hasselbalch equation is used to compute the pH of a buffer solution.
pH = pKa + log (base/acid), where pKa = -logKa.
In the equation, the base is C2H3O2-, and the acid is HC2H3O2.
Substituting the values in the equation, pH = -log1.8 x 10-5 + log(0.530/0.150) = 4.76.
Therefore, the pH of a buffer solution produced from 0.150 M HC2H3O2 and 0.530 M C2H3O2 is 4.76.
To know more about pH calculation, refer here:
https://brainly.com/question/1195974#
#SPJ11
explain how you used your titration data to determine the volume of naoh used to reach the equivalence point of your titration. comment on the extent of agreement with the predicted volume you calculated above.g
To determine the volume of NaOH used to reach the equivalence point of the titration using the titration data, we need to find the point where the acid and base are neutralized.
At this point, the moles of acid and base are equal, and this is called the equivalence point.To find the volume of NaOH used at the equivalence point, we can use the following
Steps:1. Plot the titration data on a graph of pH versus volume of NaOH added.
Steps:2. Identify the point where the pH changes abruptly. This is the equivalence point.
Steps:3. Determine the volume of NaOH added at the equivalence point by reading the volume from the graph.
Steps:4. Compare the volume of NaOH used at the equivalence point of the titration with the predicted volume calculated above.The extent of agreement with the predicted volume can be assessed by calculating the percent error.
The percent error is calculated using the formula:
Percent error = [(experimental value - theoretical value) / theoretical value] x 100
If the percent error is small, then the agreement is good. If the percent error is large, then there is a significant difference between the predicted and experimental values.
Learn more about equivalence point of the titration here, https://brainly.com/question/31181892
#SPJ11
which isotope, when bombarded with nitrogen-15, yields four neutrons and the artificial isotope dubnium-260?
The isotope that yields four neutrons and the artificial isotope dubnium-260 when bombarded with nitrogen-15 is curium-244.
Curium-244 is a transuranic element of the actinide series. When bombarded with nitrogen-15, a nucleus of curium-244 splits into two smaller nuclei, releasing four neutrons in the process.
This process is called nuclear fission. The nucleus of nitrogen-15 is then combined with the two smaller nuclei to form dubnium-260, which is an artificially produced isotope.
Nuclear fission of curium-244 is a common process used in nuclear power plants. In nuclear power plants, uranium-235 is bombarded with neutrons, causing a chain reaction that produces energy and more neutrons.
The neutrons then bombard other uranium-235 nuclei, continuing the process. By bombarding curium-244 with nitrogen-15, a similar chain reaction is created that produces dubnium-260.
The production of dubnium-260 through nuclear fission of curium-244 can be used for various scientific and industrial purposes.
It can be used in the production of nuclear weapons, nuclear fuel, medical isotopes, and in other research activities.
In addition, it can be used as a catalyst for chemical reactions, to produce high energy radiation for sterilization, and for other industrial processes.
In conclusion, curium-244 yields four neutrons and the artificial isotope dubnium-260 when bombarded with nitrogen-15.
This process, known as nuclear fission, can be used in a variety of scientific and industrial applications.
to know more about isotope refer here
https://brainly.com/question/13063428#
#SPJ11
an electrolyte solution . . . question 6 options: a) contains dissolved metals. b) contains non-polar molecules. c) is aqueous. d) contains ions. e) has free electrons in solution.
An electrolyte solution is one that contains ions. The correct option is d.
An electrolyte solution is one that can conduct an electric current. It contains charged particles or ions, which are what allow the solution to conduct an electric current. The following options can be eliminated as incorrect because they don't define electrolyte solution: a) contains dissolved metals b) contains non-polar molecules e) has free electrons in solution. Therefore, the correct option is (d) contains ions.Learn more about electrolyte solutions: https://brainly.com/question/14654936
#SPJ11
how the temperature and vapor pressure are related knowing the enthalpy of vaporization at the boiling temperature
what is the substance undergoing a chemical or physical change known as?
The substance undergoing a chemical or physical change is called a reactant. Reactants are starting materials that participate in a chemical reaction, which can result in the formation of new chemical compounds or changes in the physical properties of the substances involved.
In a physical change, the reactants retain their chemical identity, but undergo a change in their physical state or properties, such as melting, freezing, boiling, or changing color. In a chemical change, the reactants undergo a chemical reaction that results in the formation of new chemical compounds, breaking of chemical bonds, or release of energy. Understanding the properties and behavior of reactants is crucial in predicting and controlling chemical reactions in various fields, from materials science to biochemistry.
To know more about Reactants, here
brainly.com/question/17096236
#SPJ4
Answer with the Matching-match the letter with the correct item
Double replacement or metathesis reaction involves the exchange of ions between two compounds.
What are the types of reaction?Combination or synthesis reaction is a type of reaction that involves two or more reactants combining to form a single product. The general format is A + B → AB.
Decomposition reaction involves a single reactant breaking down into two or more products. The general format is AB → A + B.
The matching of the letters are;
1 - C
2 - H
3 - E
4 - F
5 - A
6 - B
7 - I
8 - J
9 - G
10 - D
1) False
2) False
3) True
4) False
5) True
6) True
7) True
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
elect any and all of these compounds that can undergo an addition and elimination reaction mechanism. OH OCH, A B C D E
Compounds that can undergo an addition and elimination reaction mechanism are OH and OCH3 since they are the ones that have a nucleophilic site or a leaving group.
The compounds that can undergo an addition and elimination reaction mechanism are listed below: OH - It is a hydroxyl group and is a nucleophile, which means it has an electron pair available for donation. OCH3 - Methoxy group, also known as OCH3, is a leaving group.
Addition reactions occur when two or more reactants combine to form a single product. They typically involve unsaturated compounds like alkenes or alkynes, which have double or triple carbon-carbon bonds. Elimination reactions, on the other hand, involve the removal of elements from a reactant to create a more unsaturated product, typically forming a double bond.
OH: This group represents an alcohol functional group. Alcohols can undergo elimination reactions, such as dehydration, to form alkenes.
OCH: This seems to be an incomplete functional group, as it is missing a carbon or hydrogen. If it's meant to represent an ether functional group (OCH3 or OCH2R, where R is an alkyl group), ethers generally do not undergo addition or elimination reactions.
In conclusion, without further information about compounds A, B, C, D, and E, we can only determine that a compound containing an OH functional group (an alcohol) can undergo elimination reactions, while the given OCH functional group does not undergo addition or elimination reactions.
To know more about nucleophilic site, refer here:
https://brainly.com/question/24297177#
#SPJ11
explain how the reactions of glycolysis can be subdivided into preparatory, cleavage, and payoff phases.
The first reaction results in: the formation of two molecules of pyruvate,
while the second reaction: regenerates the molecules of ATP and NAD+ used in the preparatory and cleavage phases.
The reactions of glycolysis can be divided into three distinct phases: preparatory, cleavage, and payoff.
The preparatory phase is the first stage of glycolysis and involves two key steps: the conversion of glucose to glucose-6-phosphate and the isomerization of glucose-6-phosphate to fructose-6-phosphate. These reactions are important for ensuring that the glucose molecule is in a suitable form for the next phase.
The cleavage phase is the second stage of glycolysis. In this phase, a total of four high-energy phosphate bonds are formed and the glucose molecule is split into two three-carbon molecules, known as glyceraldehyde-3-phosphate.
Finally, the payoff phase is the last stage of glycolysis and involves two reactions. The first reaction results in the formation of two molecules of pyruvate, while the second reaction regenerates the molecules of ATP and NAD+ used in the preparatory and cleavage phases.
To know more about glycolysis refer here:
https://brainly.com/question/30828407#
#SPJ11
1. the pinakbet that your mother cooks is an example of a _
A. solution B. mixture C. solvent D. solute
2. which is NOT a characteristic of heterogeneous mixture?
A. the substances are evenly mixed
B. the substances are completely dissolved in water
C. the substances that are mixed cannot be identified
D. the substances can still be identified from the mixture
Answer:
1. Ans: B
Explanation: Pinakbet, which contains vegetables such as eggplants and kalabasa, are physically combined. Therefore, the pinakbet is an example of a mixture
2. Ans: A
Explanation: Heterogenous are different building blocks that are mixed UNEVENLY.
some sodium chloride is added to 100 grams of water in a styrofoam cup. a thermometer is used to stir the salt water while the temperature is measured. the temperature decreases from 25oc to 24 oc. what can be said about the thermodynamics of dissolving nacl in water?
When sodium chloride is added to 100 grams of water in a styrofoam cup and the temperature decreases from 25°C to 24°C while stirring with a thermometer, the thermodynamics of dissolving NaCl in water can be said to be endothermic.
Explanation: Thermodynamics is the science that studies the connection between heat, work, and energy. A study of energy transformation in various processes, including chemical reactions, phase transitions, and changes in temperature and pressure, is included in thermodynamics.
When sodium chloride is dissolved in water, an endothermic reaction occurs, meaning that the surroundings absorb heat. Heat is absorbed by the surroundings during an endothermic reaction, resulting in a decrease in temperature in the reaction vessel.
When NaCl is dissolved in water, the same thing happens. Heat is absorbed from the surroundings to dissolve the salt, resulting in a decrease in temperature. As a result, the thermodynamics of dissolving NaCl in water is endothermic.
To know more about thermodynamics , refer here:
https://brainly.com/question/1368306#
#SPJ11
which set of compounds is arranged in order of increasing magnitude of lattice energy? which set of compounds is arranged in order of increasing magnitude of lattice energy? csi < mgs < nacl mgs < nacl < csi nacl < csi < mgs csi < nacl < mgs
The set of compounds arranged in order of increasing magnitude of lattice energy is CsI < NaCl < MgS.
Lattice energy refers to the energy needed to dissociate a solid ionic crystal into gaseous ions. This energy is needed to overcome the electrostatic attraction between the ions of an ionic crystal. As a result, ionic crystals with higher charge and smaller size have higher lattice energies.
The lattice energies of the set of compounds CsI, NaCl, and MgS can be compared. The compound with the highest lattice energy is CsI because it has the highest charge and smallest size among the given compounds. Thus, the order of lattice energies would be:
CsI < NaCl < MgS
In summary, in order of increasing magnitude of lattice energy, the set of compounds can be arranged as CsI < NaCl < MgS.
Learn more about Lattice energy here: https://brainly.com/question/25682087.
#SPJ11
Which of these is not a component of Rutherford’s model of the atom?
The Rutherford's model lacks an atom's electrical structure and electromagnetic radiation.
What elements make up Rutherford's atomic model?According to the idea, an atom has a tiny, compact, positively charged center called a nucleus, where almost all of the mass is concentrated, while light, negatively charged particles called Like planets circle the Sun, electrons also travel a great distance around it. Rutherford discovered that an atom's interior is mostly empty.
What does Rutherford's conclusion leave out?Rutherford's alpha scattering experiment did not come to any conclusions on how quickly positively charged particles travel. The nucleus, or core, of the atom contains the positively charged particles.
To know more about Rutherford's model visit:-
https://brainly.com/question/11749615
#SPJ1
when determining the energy effect of a chemical reaction the system is/are and the surroundings is/are
When determining the energy effect of a chemical reaction, the system is/are reactants and products and the surroundings are everything outside the system.
When determining the energy effect of a chemical reaction, the system and surroundings are involved. The system refers to the reactants and products involved in the chemical reaction, whereas the surroundings refer to everything else outside the system, including the temperature, pressure, and any other factors that can affect the reaction.
The energy effect of a chemical reaction can be determined by calculating the difference between the energy of the products and the energy of the reactants. This difference is known as the energy change or the enthalpy change of the reaction.
If the energy change is positive, it means that the reaction is endothermic, and energy is absorbed from the surroundings. This results in a decrease in the temperature of the surroundings.
On the other hand, if the energy change is negative, it means that the reaction is exothermic, and energy is released into the surroundings. This results in an increase in the temperature of the surroundings.
It is important to note that the energy effect of a chemical reaction can also be affected by external factors such as pressure, temperature, and the presence of a catalyst.
In conclusion, the system is the reactants, and the products and surroundings are factors like temperature and pressure, i.e., everything outside the system.
To know more about reactants, refer here:
https://brainly.com/question/13005466#
#SPJ11
an atomic transition produces a photon with a wavelength of 410 nm. what is the energy of this photon in ev?
The energy of a photon with a wavelength of 410 nm is equal to 3.03 eV.
To calculate this, you can use the formula E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Plugging in the values, you get E = (6.626x10⁻³⁴J·s)(3.0x10⁸m/s)/(410x10⁻⁹m) = 4.839 × 10-19 J = 3.03 eV.
An atomic transition produces a photon with a wavelength of 410 nm. The energy of this photon is 3.03 eV.
The following formula can be used to calculate the energy of a photon.
Energy = Planck's constant x (speed of light/wavelength).
Here, Planck's constant is (h) = 6.626 × 10⁻³⁴ J s. The speed of light is (c) = 3 × 10⁸m/s (in a vacuum). The wavelength of the photon is (λ) = 410 nm.
So, let's first convert the wavelength to meters (1 nm =10⁻⁹ m).
So, 410 nm = 410 × 10⁻⁹ m = 4.10 × [tex]10^{-7}[/tex]m. Now, we can calculate the energy of the photon using the formula.
Energy = h x (c/λ)
Energy = 6.626 × 10⁻³⁴ J s x (3 × 10⁸ m/s / 4.10 × [tex]10^{-7}[/tex] m)
Energy = 4.839 × [tex]10^{-19}[/tex] J (joules)
One electron volt is equal to 1.6 × [tex]10^{-19}[/tex]J.
So, we can convert the energy from joules to electron volts.
Energy (in eV) = Energy (in J) / (1.6 × [tex]10^{-19}[/tex]J/eV)
Energy (in eV) = 4.839 × [tex]10^{-19}[/tex]J / (1.6 × [tex]10^{-19}[/tex]J/eV)
Energy (in eV) = 3.03 eV
Therefore, the energy of the photon is 3.03 eV.
For more questions related to Planck's constant.
https://brainly.com/question/2289138
#SPJ11
a) select the best set of reagents for the transformation. an alkene bonded to a tert butyl group and three hydrogens is transformed to a tert butyl group bonded to c h 2 c h 2 o h. the best reagents are:
To transform an alkene bonded to a tert-butyl group and three hydrogens to a tert-butyl group bonded to CH2CH2OH, the best reagents are H2SO4 and H2O.
H2SO4 is used to protonate the double bond and form a carbocation, which can then undergo nucleophilic attack by water to form the final product. This reaction is known as hydration of alkenes.To perform the transformation, the alkene is first protonated with H2SO4 to form a carbocation intermediate.
Water acts as a nucleophile and attacks the carbocation to form the alcohol product. This reaction is shown below:Thus, the final product formed is tert-butyl group bonded to CH2CH2OH.Another way to perform this transformation is by using oxymercuration-demercuration.
In this reaction, the alkene is first treated with mercuric acetate and water to form a cyclic intermediate.
Know more about nucleophile here:
https://brainly.com/question/27127109
#SPJ11
suppose 0.850 l of 0.400 m h2so4 is mixed with 0.800 l of 0.250 m koh . what concentration of sulfuric acid remains after neutralization?
The concentration of sulfuric acid that remains after neutralization is 0.056 M.
To find out what concentration of sulfuric acid remains after neutralization, you will need to use the balanced equation for the reaction:
H2SO4 + 2KOH → K2SO4 + 2H2O
First, you will need to determine the moles of each reactant in the solution.
Moles can be determined using the formula:
moles = concentration x volume
In this case:
moles of H2SO4 = 0.850 L x 0.400 M = 0.34 mol
moles of KOH = 0.800 L x 0.250 M = 0.2 mol
Since the reaction is a 1:2 ratio, you will need to determine which reactant is limiting the reaction.
To do this, compare the mole ratios of the reactants:
0.34 mol H2SO4 : 0.2 mol KOH = 1.7 : 1
Since the ratio of H2SO4 to KOH is greater than 1:2, KOH is the limiting reactant. Therefore, all of the KOH is used up in the reaction, leaving some H2SO4 unreacted.
To find the amount of H2SO4 remaining, you will need to use the mole ratio of H2SO4 to KOH.
Since 2 moles of KOH react with 1 mole of H2SO4, you can use the mole ratio:
0.2 mol KOH x (1 mol H2SO4 / 2 mol KOH) = 0.1 mol H2SO4 remaining
Finally, you can determine the concentration of the H2SO4 remaining:
concentration = moles / volume
concentration = 0.1 mol / (0.850 L + 0.800 L)
concentration = 0.056 M
Therefore, the concentration of sulfuric acid that remains after neutralization is 0.056 M.
For more such questions on concentration, click on:
https://brainly.com/question/28564792
#SPJ11
the pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature?
Answer:
pressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the newpressure on a balloon holding 433 ml of an ideal gas is increased from 688 torr to 1.00 atm. what is the new volume of the balloon (in ml) at constant temperature
what must be true for precipitation to occur? group of answer choices qsp > ksp qsp < ksp precipitation always occurs with sparingly soluble compounds none of these
For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp).
Precipitation is the conversion of a dissolved substance into a solid, which then settles out of a solution. Precipitation occurs when a liquid solution is cooled or heated, causing it to become super-saturated with one or more solutes. A solution's super-saturation means that it contains more of a solute than it can contain at equilibrium.
A tiny seed crystal of the solute is added to the solution to kick off the precipitation. The seed crystal provides a template for the rest of the solute to nucleate and form a solid. For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp). When Qsp is greater than Ksp, the solution is supersaturated and precipitates are formed. If Qsp is less than Ksp, the solution is unsaturated and no precipitation occurs.
Learn more about solution at:
https://brainly.com/question/16159788
#SPJ11
2.37-l container is filled with 186 g argon. (a) if the pressure is 10.0 atm, what is the temperature? webassign will check your answer for the correct number of significant figures. k (b) if the temperature is 225 k, what is the pressure?
(a) If the pressure is 10.0 atm, the temperature is 62.0 K.
(b) if the temperature is 225 k, the pressure is 36.3 atm.
a) In order to calculate the temperature, we need to use the ideal gas law, PV = nRT, where P is the pressure, V is the volume of the container, n is the number of moles of argon, R is the ideal gas constant, and T is the temperature.
We can calculate the number of moles, n, by using the molar mass of argon, which is 39.948 g/mol.
We have n = 186 g / 39.948 g/mol = 4.656 mol.
So we can plug in our values and solve for T:
T = (10.0 atm)(2.37 L) / (4.666 mol)(0.08206 L·atm/mol·K) = 62.0 K.
b) To calculate the pressure, we can again use the ideal gas law, PV = nRT. We know the values of n, R, and T from the previous question.
Since the volume of the container is given, we can plug in these values to solve for P:
P = (4.666 mol)(0.08206 L·atm/mol·K)(225 K) / 2.37 L = 36.3 atm.
Learn more about ideal gas law here: https://brainly.com/question/27870704.
#SPJ11
what is the total mass in grams of precipitate that can be produced by mixing a solution made from 300g of solid barium chlorate dissolved in 760 ml of a soloution and 540ml of 0.67m lithium sulfate soloution
The total mass of precipitate (BaSO4) that can be produced is 175.6 grams.
What is total mass?Total mass refers to the weight of the shell, its service and structural apparatus, and the largest cargo permitted to be carried
To determine the mass of precipitate that can be produced when solutions of barium chlorate and lithium sulfate are mixed, we need to first write and balance the chemical equation for the reaction:
Ba(ClO3)2 (aq) + Li2SO4 (aq) → BaSO4 (s) + 2LiClO3 (aq)
The balanced equation shows that for every one mole of barium chlorate that reacts, one mole of barium sulfate is produced. Therefore, we need to calculate the number of moles of barium chlorate in the solution to determine the maximum amount of barium sulfate that can be formed.
First, we need to calculate the number of moles of barium chlorate in the solution:
Mass of solid barium chlorate = 300 g
Molar mass of barium chlorate = 2 x atomic mass of Ba + 6 x atomic mass of Cl + 6 x atomic mass of O = 2(137.33 g/mol) + 6(35.45 g/mol) + 6(16.00 g/mol) = 398.22 g/mol
Number of moles of barium chlorate = mass / molar mass = 300 g / 398.22 g/mol = 0.753 mol
Next, we need to calculate the maximum amount of barium sulfate that can be formed from this amount of barium chlorate:
According to the balanced equation, 1 mole of Ba(ClO3)2 produces 1 mole of BaSO4
Therefore, the maximum number of moles of BaSO4 that can be formed is also 0.753 mol
Finally, we can calculate the mass of BaSO4 that can be formed using its molar mass:
Molar mass of BaSO4 = atomic mass of Ba + atomic mass of S + 4 x atomic mass of O = 137.33 g/mol + 32.06 g/mol + 4(16.00 g/mol) = 233.39 g/mol
Mass of BaSO4 = number of moles x molar mass = 0.753 mol x 233.39 g/mol = 175.6 g
Therefore, the total mass of precipitate (BaSO4) that can be produced is 175.6 grams.
Learn more about total mass
https://brainly.com/question/17552181
#SPJ1
true or false: when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction.
The statement that "when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction" is False.
When two solutions containing ions as solutes are combined and a reaction occurs, it is not always a single-replacement reaction.
The type of reaction that will occur depends on the reactants and the conditions of the reaction.
For example, if two solutions containing different metal ions are mixed together, a double-replacement reaction may occur, in which two ionic compounds are formed.
Similarly, a precipitation reaction may occur if the combination of the two solutions produces an insoluble product.
In general, single-replacement reactions involve one element replacing another element in a compound, and occur when one of the reactants is an elemental solid, such as a metal.
To know more about solutes, refer here:
https://brainly.com/question/7932885#
#SPJ11
a 24.6 ml sample of 0.389 m ethylamine, c2h5nh2, is titrated with 0.325 m hydroiodic acid. at the equivalence point, the ph is .
At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0.
At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0. The equation for the reaction is:
C2H5NH2 + HI → C2H5NH3+ + I-
The number of moles of hydroiodic acid, HI, needed to reach the equivalence point is equal to the number of moles of ethylamine, C2H5NH2. To calculate this, use the following equation:
Moles of HI = Moles of C2H5NH2
Volume of C2H5NH2 x Molarity of C2H5NH2 = Volume of HI x Molarity of HI
24.6 mL x 0.389 M = Volume of HI x 0.325 M
Volume of HI = 24.6 mL x 0.389 M / 0.325 M
Volume of HI = 30.53 mL
At the equivalence point, the pH of the solution is 0.
Learn more about titration here:
https://brainly.com/question/2728613#
#SPJ11
calculate the theoretical yield for methyl orange (consider sulfanilic acid as your limiting reagent in the diazotization reaction and what the theoretical yield of diazotized sulfanilic acid would be)
The theoretical yield of diazotized sulfanilic acid can be calculated by multiplying the molar ratio of sulfanilic acid (the limiting reagent) to methyl orange by the molar mass of sulfanilic acid. The molar ratio of sulfanilic acid to methyl orange is 1:1, and the molar mass of sulfanilic acid is 243.26 g/mol. Therefore, the theoretical yield of diazotized sulfanilic acid is 243.26 g/mol.
To calculate the theoretical yield of methyl orange, we need to know the molar ratio of methyl orange to diazotized sulfanilic acid. This is determined by the reaction conditions, and typically the molar ratio of methyl orange to diazotized sulfanilic acid is 3:2. This means that for every 3 moles of methyl orange, 2 moles of diazotized sulfanilic acid are required. The molar mass of methyl orange is 384.2 g/mol. Multiplying the molar ratio (3:2) by the molar mass of methyl orange yields a theoretical yield of 576.3 g/mol.
In conclusion, the theoretical yield of diazotized sulfanilic acid is 243.26 g/mol, and the theoretical yield of methyl orange is 576.3 g/mol.
To know more about theoretical yield click here:
https://brainly.com/question/14966377
#SPJ11
the electronic configuration of O2−is2s22p6.
Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.
What is meant by electronic configuration?Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.
When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.
To know more about electronic configuration, refer
https://brainly.com/question/26084288
#SPJ1