Which table represents a function?

Answer:

a 1053

b 250

multiply 650 by 1.62 for part a.

for part b divide by 1.62 since pound is less than dollar

hope this helps :)

Therefore , the solution of the given problem of unitary method comes out to be during the 4-second period, the tram's elevation changed by 3 metres every second.

To complete the assignment, use the iii . -and-true basic technique, the real variables, and any pertinent details gathered from basic and specialised questions. In response, customers might be given another opportunity to sample expression the products. If these changes don't take place, we will miss out on important gains in our knowledge of programmes.

Here,

By dividing the overall elevation change (12 metres) by the total time required (4 seconds),

it is possible to determine the change in the tram's elevation every second. We would then have the average rate of elevation change per second.

=> Elevation change equals 12 metres

=> Total duration: 4 seconds

=>  12 meters / 4 seconds

=> 3 meters/second

As a result, during the 4-second period, the tram's elevation changed by 3 metres every second.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

Answer:

7,000,000÷2000

= 3,500

Step-by-step explanation:

therefore, each worker makes 3500 bikes per year

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

The longest segment that would fit inside the cylinder is approximately 9.06 centimeters.

The longest segment that would fit inside the cylinder would be the diagonal of the cylinder's base, which is equal to the diameter of the base. The diameter of the base is equal to twice the radius, so it is 6 cm. Using the Pythagorean theorem, we can find the length of the diagonal:

[tex]diagonal^2 = radius^2 + height^2 \\diagonal^2 = 3^2 + 8^2 \\diagonal^2 = 9 + 64 \\diagonal^2 = 73 \\diagonal = sqrt(73)[/tex]

Therefore, the longest segment that would fit inside the cylinder is approximately 8.54 cm (rounded to the nearest hundredth).
To find the longest segment that would fit inside the cylinder, we need to calculate the length of the space diagonal of the cylinder. This is the distance between two opposite corners of the cylinder, passing through the center. We can use the Pythagorean theorem in 3D for this calculation.

The terms we'll use are:
- Radius (r): 3 cm
- Height (h): 8 cm

To find the space diagonal (d), we can use the following formula:

[tex]d = \sqrt{r^2 + r^2 + h^2}[/tex]
Plug in the values:

[tex]d = \sqrt{((3 cm)^2 + (3 cm)^2 + (8 cm)^2)} d = \sqrt{(9 cm^2 + 9 cm^2 + 64 cm^2)} d = \sqrt{(82 cm^2)}[/tex]
d ≈ 9.06 cm

Learn more about cylinder here:

https://brainly.com/question/23991640

#SPJ11

The longest segment that can fit inside the cylinder is. [tex]$\sqrt{73}$ cm[/tex].

The longest segment that can fit inside a cylinder is a diagonal that connects two opposite vertices of the cylinder.

The length of this diagonal by using the Pythagorean theorem.

Pythagorean theorem or Pythagoras' theorem is a fundamental relation in Euclidean geometry between the three sides of a right triangle.

It states that the area of the square whose side is the hypotenuse (the side opposite the right angle) is equal to the sum of the areas of the squares on the other two sides.

This theorem can be written as an equation relating the lengths of the sides a, b and the hypotenuse c, often called the Pythagorean equation:[1]

[tex]{\displaystyle a^{2}+b^{2}=c^{2}.}[/tex]

The theorem is named for the Greek philosopher Pythagoras, born around 570 BC.

The theorem has been proven numerous times by many different methods – possibly the most for any mathematical theorem.

The proofs are diverse, including both geometric proofs and algebraic proofs, with some dating back thousands of years.

Consider a right triangle with legs equal to the radius.

[tex]$r$[/tex] and the height [tex]$h$[/tex] of the cylinder, and with the diagonal as the hypotenuse.

Then, by the Pythagorean theorem, the length of the diagonal is:

[tex]$\sqrt{r^2 + h^2} = \sqrt{3^2 + 8^2} = \sqrt{73}$[/tex]

For similar questions on cylinder

https://brainly.com/question/23935577

#SPJ11

The logical assumption used is: An arithmetic sequence is a set of discrete values, whereas a line is a continuous set of values.

An arithmetic sequence is a set of numbers where, with the exception of the first term, each term is obtained by adding a fixed constant to the term before it. Every pair of following terms in the sequence has the same fixed constant, which is known as the common difference. A1 stands for the first term in an arithmetic sequence, while an is used to represent the nth term.

A solid line symbolises continuous numbers, whereas the classmate's logical presumption is that an arithmetic series comprises of discrete values. This presumption is untrue, though, as a line can effectively represent an arithmetic series.

Learn more about arithmetic sequence here:

https://brainly.com/question/29616017

#SPJ1

The current in the circuit when the resistance is 12 ohms is 40 amps.

What is fraction?

A fraction is a mathematical term that represents a part of a whole or a ratio between two quantities.

We can use the inverse proportionality formula to solve this problem, which states that:

current (in amps) x resistance (in ohms) = constant

Let's call this constant "k". We can use the information given in the problem to find k:

24 amps x 20 ohms = k

k = 480

Now we can use this constant to find the current when the resistance is 12 ohms:

current x 12 ohms = 480

current = 480 / 12

current = 40 amps

Therefore, the current in the circuit when the resistance is 12 ohms is 40 amps.

To learn more about fraction from the given link:

https://brainly.com/question/10354322

#SPJ1

The statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

The expression 100 - 0.4m represents the amount of medicine in Evan's bloodstream after m minutes, where the amount of medicine decreases by 0.4 milligrams each minute.

The coefficient of the variable m (-0.4) represents the rate of change of the amount of medicine in Evan's bloodstream per minute. It tells us that for every one minute that passes, the amount of medicine in his bloodstream decreases by 0.4 milligrams.

The constant term (100) represents the initial amount of medicine in Evan's bloodstream before the medicine starts to decrease.

Therefore, the statement that is true about Evan's expression is that it represents a linear function of the amount of medicine in his bloodstream, where the initial amount is 100 milligrams and the rate of change is -0.4 milligrams per minute.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ1

Answer:

1

Step-by-step explanation:

First of all we use the "law of sines"

to get the measure/length we need the opposing angle of it of the side, now in this case the missing side is x

and its opposing angle is missing so using common sense, the sum of angles in the triangle is 180°

180°=70°+51°+ x

x = 180°-121°

=59°

Using law of sines:

(sides are represented by small letters/capital letters are the angles)

a/sinA= b/sinB= c/sinC

We have one given side which is "9"

so,

9/sin70= x/sin59

doing the criss-cross method,

9×sin59=sin70×x

9×sin59/sin70=x

x=8.2 (answer 1)

I hope this was helpful <3

The probability of picking one bolt and one nut is 1/2 or 50%.

To find the probability that one is a bolt and one is a nut, we need to use the formula for calculating the probability of two independent events happening together: P(A and B) = P(A) × P(B)

Let's first calculate the probability of picking a bolt from the box:

P(bolt) = number of bolts / total number of parts = 3/6 = 1/2

Now, let's calculate the probability of picking a nut from the box:

P(nut) = number of nuts / total number of parts = 3/6 = 1/2

Since the events are independent, the probability of picking a bolt and a nut in any order is:

P(bolt and nut) = P(bolt) × P(nut) + P(nut) × P(bolt)

P(bolt and nut) = (1/2) × (1/2) + (1/2) × (1/2)

P(bolt and nut) = 1/2

Therefore, the probability of picking one bolt and one nut is 1/2 or 50%.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

To find the probability that one chosen part is a bolt and the other chosen part is a nut, we need to use the formula for probability:

Probability = (number of desired outcomes) / (total number of outcomes)

There are two ways we could choose one bolt and one nut: we could choose a bolt first and a nut second, or we could choose a nut first and a bolt second. Each of these choices corresponds to one desired outcome.

To find the number of ways to choose a bolt first and a nut second, we multiply the number of bolts (3) by the number of nuts (3), since there are 3 possible bolts and 3 possible nuts to choose from. This gives us 3 x 3 = 9 total outcomes.

Similarly, there are 3 x 3 = 9 total outcomes if we choose a nut first and a bolt second.

Therefore, the total number of desired outcomes is 9 + 9 = 18.

The total number of possible outcomes is the number of ways we could choose two parts from the box, which is the number of ways to choose 2 items from a set of 6 items. This is given by the formula:

Total outcomes = (6 choose 2) = (6! / (2! * 4!)) = 15

Putting it all together, we have:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 18 / 15
Probability = 1.2

However, this answer doesn't make sense because probabilities should always be between 0 and 1. So we made a mistake somewhere. The mistake is that we double-counted some outcomes. For example, if we choose a bolt first and a nut second, this is the same as choosing a nut first and a bolt second, so we shouldn't count it twice.

To correct for this, we need to subtract the number of outcomes we double-counted. There are 3 outcomes that we double-counted: choosing two bolts, choosing two nuts, and choosing the same part twice (e.g. choosing the same bolt twice). So we need to subtract 3 from the total number of desired outcomes:

Number of desired outcomes = 18 - 3 = 15

Now we can calculate the correct probability:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 15 / 15
Probability = 1

So the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

learn more about probability

https://brainly.com/question/30034780

#SPJ11

The expression for the problem is:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

Bruce charged David and Ricky a fixed fee of $42 for parts plus an hourly rate of $12 for labor. He spent 3 hours repairing the motorcycle. Since there are two people (David and Ricky), we need to multiply the hourly rate by the number of hours worked (3) and then multiply that by 2. Finally, we add the fixed fee for the parts to get the total cost.

To evaluate the expression using the order of operations, we need to perform the multiplication first and then the addition. So, we have:

Total cost = $42 + ($12/hour × 3 hours) × 2 people

= $42 + ($36) × 2

= $42 + $72

= $114

Therefore, David and Ricky owe Bruce a total of $114 for the motorcycle repair.

Learn more expression on

https://brainly.com/question/1859113

#SPJ1

The correct statement about scale factor is the radius of the larger can will be 8 inches. (option c).

Let's first consider the dimensions of the small can of tomato paste. We are given that it has a radius of 2 inches and a height of 4 inches. Therefore, its volume can be calculated using the formula for the volume of a cylinder, which is V = πr²h, where V is the volume, r is the radius, and h is the height. Substituting the given values, we get:

V_small = π(2²)(4) = 16π cubic inches

Using these dimensions, we can calculate the volume of the larger can using the same formula:

V_large = π(6²)(12) = 432π cubic inches

Now, let's compare the volumes of the small and large cans. We have:

V_large = 432π cubic inches > 16π cubic inches = V_small

Therefore, we can conclude that the volume of the larger can is greater than the volume of the smaller can. But is it three times greater? Let's compare:

V_large = 432π cubic inches 3

V_small = 3(16π) cubic inches = 48π cubic inches

We see that 432π cubic inches is not equal to 48π cubic inches, so option b) is not correct.

Finally, let's consider the radius of the larger can. We found earlier that it is 6 inches, which is greater than the radius of the smaller can, but it is not 8 inches. Therefore, option c) is correct.

To know more about scale factor here

https://brainly.com/question/30215119

#SPJ4

Complete Question:

A small can of tomato paste has a radius of 2 inches and a height of 4 inches. Suppose the larger, commercial-size can has dimensions that are related by a scale factor of 3. Which of these true?

a) The radius of the larger can will be 5 inches.

b) The volume of the larger can will be 3 times the volume of the smaller can

c) The radius of the larger can will be 8 inches.

d) The volume of the larger can is 3 times the volume of smaller can

For a normal distribution ,a positive value of z simply means that the observation or sample mean is above the population mean this implies

none of the options provided is completely accurate.

All the observations must have had positive values,

It is not necessarily true for a positive value of z.

The value of z indicates how many standard deviations away from the mean a particular observation or sample mean is.

A positive value of z simply means that the observation or sample mean is above the population mean.

The area corresponding to the z is either positive or negative,

It is also not accurate.

The area under the normal curve corresponds to probabilities, not positive or negative values.

The area to the right of the mean corresponds to positive z-values, and the area to the left of the mean corresponds to negative z-values.

The sample mean is smaller than the population mean,

It is a possibility when the z-value is negative, indicating that the sample mean is below the population mean.

The sample mean is larger than the population mean,

It is a possibility when the z-value is positive, indicating that the sample mean is above the population mean.

Therefore, the sample mean can be either larger or smaller than the population mean depending on the direction of the z-value.

Learn more about population mean here

brainly.com/question/29064364

#SPJ4

The two column proof is written as follows

Statement                                                           Reason

MA = XR                                           given (opposite sides of rectangle)

MK = AR                                           given (opposite sides of rectangle)

arc MA = arc RK                               Equal chords have equal arcs

arc MK = arc AK                               Equal chords have equal arcs

An arc is a portion of the circumference of a circle, and a chord is a line segment that connects two points on the circumference.

If two chords in a circle are equal in length, then they will cut off equal arcs on the circumference. This is because the arcs that the chords cut off are subtended by the same central angle.

Learn more on circle theorem at:

https://brainly.com/question/6240879

#SPJ1

The answers are:

a) 2 cakes cost £5

b) 1 cake costs £2.5.

What is an algebraic expression?

An algebraic expression is a mathematical phrase that contains variables, constants, and mathematical operations. It may also include exponents and/or roots. Algebraic expressions are used to represent quantities and relationships between quantities in mathematical situations, often in the context of problem-solving.

To find the cost of 1 cupcake, we need to subtract the cost of the tea from the total cost of 3 cupcakes:

3 cupcakes + 1 tea = £9

3 cupcakes = £9 - 1 tea = £9 - £1.5 (assuming the cost of 1 tea is the same in both cases) = £7.5

1 cupcake = £7.5 ÷ 3 = £2.5

So 2 cupcakes would cost:

2 cupcakes = 2 × £2.5 = £5

Therefore, the answers are:

a) 2 cakes cost £5

b) 1 cake costs £2.5.

To learn more about algebraic expression from given link:

https://brainly.com/question/19245500

#SPJ1

Equation that represents the total number of minutes y Emily studied for the math exam is y = 40 +x.

We can represent the total number of minutes Emily studied for the math exam using the equation,

y = 40 + x

Here, 'y' represents the total number of minutes Emily studied for the math exam, '40' represents the number of minutes she studied in the morning, and 'x' represents the number of minutes she studied later that evening.

By adding the number of minutes studied in the morning to the number of minutes studied later that evening, we can calculate the total number of minutes Emily studied for the math exam.

To learn more about Equation here:

https://brainly.com/question/29147854

#SPJ4

Using the fact that the triangles are similar we can see that the value of x is  36

We can see that the triangles are similar due to the same interior angles, then ther is a scale factor k between them.

So we can write:

20*k = 48

k = 48/20 = 2.4

Then:

x = 15*2.4

x = 36

That is the value of x.

Learn more about similar triangles at:

https://brainly.com/question/14285697

#SPJ1

Since cosine is negative and a is in quadrant III, we know that sine is positive. We can use the Pythagorean identity to solve for sine:

sin^2(a) + cos^2(a) = 1

sin^2(a) + (-5/9)^2 = 1

sin^2(a) = 1 - (-5/9)^2

sin^2(a) = 1 - 25/81

sin^2(a) = 56/81

Taking the square root of both sides:

sin(a) = ±sqrt(56/81)

Since a is in quadrant III, sin(a) is positive. Therefore:

sin(a) = sqrt(56/81) = (2/3)sqrt(14)

Answer:

Jaxon made 11 free throws over the season.

Step-by-step explanation:

If he made 5% of his free throws, we know that he will make 5% of the total number of free throws he took, which is 220:

We multiply 220 by 0.05, or 5% to find out how many free throws he made:

220*0.05 = 11

After that, we now know that Jaxon made 11 of his free throws out of 220 over the course of the season, or 5%.

Answer:

The Correct answer is sinA/3.2=sin110°/4.6

The perimeter and the area of the regular polygon are 20 inches and 27.53 square inches.

The figure representing a regular polygon with five sides of same length, whose perimeter and area is well described by following formulas:

Perimeter

p = n · l

Area

A = (n · l · a) / 2

Where:

Where the apothema is:

a = 0.5 · l / tan (180° / n)

If we know that l = 4 in and n = 5, then the perimeter and the area of the polygon are:

Perimeter

p = 5 · (4 in)

p = 20 in

Area

a = 0.5 · (4 in) / tan (180° / 5)

a = 0.5 · (4 in) / tan 36°

a = 2.753 in

A = [5 · (4 in) · (2.753 in)] / 2

A = 27.53 in²

To learn more on area of regular polygons: https://brainly.com/question/12291395

#SPJ1

The construction and the resulting triangles are interesting because they allow us to explore the properties of perpendicular lines and the angles they form.

Now, let's look at the two triangles that are formed as a result of this construction - ΔABD and ΔBCD. Since line BD is perpendicular to line AC, we know that angle ABD and angle CBD are both right angles. This is because any line that is perpendicular to another line forms a right angle with that line.

Now, let's look at the other sides of the triangles. In ΔABD, we have side AB, which is different from side BC in ΔBCD. Similarly, in ΔBCD, we have side CD, which is different from side AD in ΔABD.

So, although the two triangles share a common side (BD), they have different lengths for their other sides. This means that the two triangles are not congruent, since congruent triangles must have the same length for all their sides.

However, we can still find some similarities between the two triangles. For example, since angle ABD and angle CBD are both right angles, we know that they are congruent. Additionally, we can use the fact that angle ADB is congruent to angle CDB, since they are alternate interior angles formed by a transversal (line BD) intersecting two parallel lines (line AC and the line perpendicular to it passing through point B).

To know more about triangle here

https://brainly.com/question/8587906

#SPJ4

Complete Question:

Draw a line through point B that is perpendicular to line AC Label the intersection of the line and line AC as point D. Take a screenshot of your work, save it, and insert the image in the space below.

Part B

Based on your construction, what do you know about ΔABD and ΔBCD?

Becca made a mistake while constructing triangle DEF by using the angles 50°, 65°, and 65°. The mistake she made was violating the triangle inequality theorem.

According to the theorem, the sum of any two sides of a triangle must be greater than the third side. In other words, if we add the lengths of two sides of a triangle, it must be greater than the length of the third side.

Since Becca only used angles to construct the triangle, she did not consider the side lengths of the triangle. Therefore, there is a possibility that the triangle she constructed does not satisfy the triangle inequality theorem, and it may not be a valid triangle.

In order to ensure the triangle is valid, Becca needs to consider the side lengths while constructing the triangle. She could use trigonometric ratios or a ruler and protractor to measure the side lengths and angles accurately.

To know more about triangle inequality theorem here

https://brainly.com/question/1163433

#SPJ4

To determine if each ordered pair is a point of intersection between the line x - y = 6 and the circle y² - 26 = -x², we need to substitute the values of x and y in both equations and see if they are true for both.

For the ordered pair (1, -5):

x - y = 6 becomes 1 - (-5) = 6, which is true.

y² - 26 = -x² becomes (-5)² - 26 = -(1)², which is false.

Therefore, (1, -5) is not a point of intersection.

For the ordered pair (1, 5):

x - y = 6 becomes 1 - 5 = -4, which is false.

y² - 26 = -x² becomes (5)² - 26 = -(1)², which is true.

Therefore, (1, 5) is a point of intersection.

For the ordered pair (5, -1):

x - y = 6 becomes 5 - (-1) = 6, which is true.

y² - 26 = -x² becomes (-1)² - 26 = -(5)², which is false.

Therefore, (5, -1) is not a point of intersection.

So the answer is:

(1,-5) - No

(1,5) - Yes

(5,-1) - No

to know more about equations

brainly.com/question/29657983

#SPJ1

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

The psychologist finds that the estimated Cohen's d is  0.32, the t statistic is 2. 83, and r² is 0.073.  Using r² and the extension of Cohen's guidelines for interpreting the effect size using r², there is a small treatment effect.   job seeker finds that the estimated Cohen's d is 0.88, the t statistic is 7. 78, and r² is 0.479.Using r² and the extension of Cohen's guidelines for interpreting the effect size with r², there is a large treatment effect

To calculate the estimated Cohen's d, we use the formula

d = (M - M0) / SD

where M is the mean of the treatment group (job seekers who received training on using the Internet to find job listings), M0 is the mean of the control group (typical job seeker), and SD is the pooled standard deviation of the two groups. Using the given values, we have

M = 8.7 months

M0 = 7.4 months

SD = 4.1 months

So, d = (8.7 - 7.4) / 4.1 = 0.32

Using Cohen's guidelines for interpreting effect size with Cohen's d, a value of 0.2 is considered a small effect, 0.5 a medium effect, and 0.8 a large effect. Therefore, with an estimated Cohen's d of 0.32, there is a small treatment effect.

To calculate r², we use the formula

r² = t² / (t² + df)

where t is the t statistic, df is the degrees of freedom (n-2 for a two-group design), and n is the sample size. Using the given values for the Internet training group, we have

t = 2.83

n = 81

df = 79

So, r² = 2.83² / (2.83² + 79) = 0.073

Using the extension of Cohen's guidelines for interpreting effect size with r², a value of 0.01 is considered a small effect, 0.09 a medium effect, and 0.25 a large effect. Therefore, with an r² of 0.073, there is a small treatment effect.

For the job seekers who received training on interview skills, we can calculate Cohen's d and r² in a similar way

d = (M - M0) / SD = (8.1 - 7.4) / 0.8 = 0.88

t = 7.78

n = 81

df = 79

r² = 7.78² / (7.78² + 79) = 0.479

Using Cohen's guidelines for interpreting effect size with Cohen's d, a value of 0.2 is considered a small effect, 0.5 a medium effect, and 0.8 a large effect. Therefore, with an estimated Cohen's d of 0.88, there is a large treatment effect.

Using the extension of Cohen's guidelines for interpreting effect size with r², a value of 0.01 is considered a small effect, 0.09 a medium effect, and 0.25 a large effect. Therefore, with an  r² of 0.479, there is a medium to large treatment effect.

To know more about estimated Cohen's d:

https://brainly.com/question/31427772

#SPJ4

Answer:.317

.091

Small to med

Med

.875

.431

Large

Large

Step-by-step explanation:

The surface area of the cylinder is approximately 94.2 ft².

Surface area refers to the total area of the external or outer part of an object. It is the sum of the areas of all the individual surfaces or faces of the object. Surface area is typically measured in square units, such as square inches (in²), square feet (ft²), or square meters (m²), depending on the unit of measurement used.

According to the given information:

The surface area of a cylinder is the sum of the lateral surface area (the curved surface) and the area of the two circular bases.

The formula for the lateral surface area of a cylinder is given:

Lateral Surface Area = 2πrh

where r is the radius of the cylinder and h is the height of the cylinder.

Plugging in the given values for the radius (r = 3 ft) and height (h = 2 ft), we can calculate the lateral surface area:

Lateral Surface Area = 2π * 3 * 2 = 12π ft²

The formula for the area of a circle (which represents the bases of the cylinder) is given:

Circle Area = πr²

Plugging in the given value for the radius (r = 3 ft), we can calculate the area of each circular base:

Circle Area = π * 3² = 9π ft²

Since there are two bases in a cylinder, we multiply this by 2 to account for both bases:

2 * Circle Area = 2 * 9π = 18π ft²

Now, we can add the lateral surface area and the area of the two bases to find the total surface area of the cylinder:

Total Surface Area = Lateral Surface Area + 2 * Circle Area

= 12π + 18π

= 30π ft²

As a decimal rounded to the nearest tenth, the surface area of the cylinder is approximately 94.2 ft²

To know more about surface area visit: https://brainly.com/question/22074027

#SPJ1

The probability that the total shown on the two dice after they are rolled is greater than or equal to 8 is 1/9.

Answer: Sarah bought 5 first class tickets and (13-5) = 8 coach tickets.

Step-by-step explanation: The taken a toll of one to begin with lesson ticket is $1200 and the fetched of one coach ticket is $380.

So, the full taken a toll of first class tickets would be 1200x and the entire cost of coach tickets would be 380(13-x) = 4940 - 380x.

The overall fetched of the tickets is given as $9040, so we will set up the taking after condition:

1200x + 4940 - 380x = 9040

Streamlining and tackling for x, we get:

820x = 4100

x = 5