Answer:
hydrogen and helium
Explanation:
i got it 100 percent. Hope this Helps!
Assertion: In electrical circuits the connecting wires are usually made of thick copper wires. Reason: Thicker wires offer higher resistance and the wires are made of copper as the electrical conductivity of copper is low
a)Both A and R are true and R is the correct explanation of A.b)Both A and R are true, and R is not the correct explanation of A.c)A is true, but R is false. d)A is false, but R is true. e)Both A and R are false.
There actually three assertions here: one in A and two more in B.
All three assertions, as well as the reasoning described in this mess, are all False.
The correct choice from the list is e), but that doesn't even describe the complete Falseness of this disaster.
the melting point and boiling point of Ice are respectively
a. 273k,373k. b. 373k,273k c.0k,100k d.100k,0k
a. 273k,373k
This is the answer.
What structure is represented by the letter
C?
PLEASE HELP!!!!!
Choose 1 answer:
А
Lysosome
B
Nucleus
C
Vacuole
D
Mitochondria
Give the relationship between the number of valence electrons in an atom's
valence electron shell and the position of the element on the Periodic Table
Answer:
they're reactions
Explanation:
The relationship between the valence electrons and position is: the number of valence electrons determines the position
What is valence electron?This is the number of electrons in the outermost shell of an atom.
NOTE: The outermost shell is called valence shell
Position in Periodic tableThis is where an element is located in the periodic table
Relationship between valence electrons and positionThe position of an element in the periodic table is determined by the number of valence electrons.
For example
Sodium, Na (atomic number of 11) has the following electronic configuration
1st shell = 2 electrons2nd shell = 8 electrons 3rd (valence) shell = 1 electronSince the valence electron is 1, thus, sodium is located in group 1 of the periodic table.
Thus, we can see that the position of an element in the periodic table is related to the valence electron(s) in the atomic shell of the element.
Learn more about valence electron:
https://brainly.com/question/13993867
#SPJ2
Will give brainliest!!
How much KClO3 is needed to make a saturated solution in 100 mL of water at 70⁰ C?
Answer:
iam not sure but I think its NaNO3
Select the correct answer.
Which graph shows the correct relationship between kinetic energy and speed?
Answer:
D
Explanation:
Kinetic energy = 1/2mV^2
From the formula above, we can deduce that kinetic energy is proportional to the square of speed. That is,
K.E = V^2
Graphically, the relationship isn't linear but a positive exponential. Therefore, option D is the correct answer.
Answer:
Its D
Explanation:
g A projectile of mass 3 kg is launched horizontally from an initial height 3 m with an initial velocity 10 m/s. This velocity in the x direction is preserved when you ignore air resistance. The projectile still accelerates in the vertical y direction toward the ground, but this is exactly the energy lost from potential energy. Energy is conserved as long as you use the total mechanical energy equation. What is the final kinetic energy as the projectile just reaches the ground
Answer:
The kinetic energy at ground will be "238.2 J".
Explanation:
The given values are:
mass,
m = 3 kg
Initial height,
h = 3 m
Initial velocity,
v = 10 m/s
By using the conservation of energy at points A and B,
⇒ [tex]E_A=E_B[/tex]
⇒ [tex]mgh+\frac{1}{2}mv^2=k_B[/tex]
On substituting the values, we get
⇒ [tex]3\times 9.8\times 3+\frac{1}{2}\times 3\times (10)^2=k_B[/tex]
⇒ [tex]88.2+0.5\times 3\times 100=k_B[/tex]
⇒ [tex]88.2+150=k_B[/tex]
⇒ [tex]238.2 =k_B[/tex]
Why is this true? Why is this true? Photons of lower-frequency light don't have enough energy to eject an electron. The electric field of low-frequency light does not vibrate the electrons rapidly enough to eject them. The number of photons in low-frequency light is too small to eject electrons. Low-frequency light does not penetrate far enough into the metal to eject electrons. Request Answer
Answer:
the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron
Explanation:
This question is in the model of the photoelectric effect, where some electrons are expelled from the metal by the action of a ray of light.
This effect was explained by Einstein supposes that the light rays are formed by photons and the energy of these photons is given by the Planco relation
K = h f - Ф
where K is the kinetic energy of the ejected electrons and Ф is the work function, it keeps the electrons inside the material.
When analyzing this expression there is a minimum frequency (threshold) for which K = 0
hf = Ф
Below this frequency the photons in the light beam do not have the energy to expel the electrons from the material.
Let's examine the answers
a) True. You agree with the above
b) False. The analysis is in terms of individual shock
c) False. The expulsion does not have to do with the number of photons but with the energy of each one
therefore the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron
Proton traveling across a capacitor A proton enters with a velocity v between the plates of a capacitor as shown in the figure. What is the direction of the magnetic field needed so that the proton continues its trajectory, undeflected? Explain each step of your reasoning.
Answer:
Please see the direction of force in the attachment
Explanation:
As the particle enters the capacitor, it experiences electric. In order to move in the same direction as the electron was moving before entering the capacitor, the force due to the electric field of capacitor must be balanced by the magnetic field.
The direction of particle is shown in the attachment.
As we know,
Force = q (v *B)
what happens to a neutron that is not attached to a proton?
How efficient are the small and large scale solar-power systems used in individual homes and industrial settings? What is the environmental impact of the generation of solar power?
In detail plz
Answer:
[tex]\color{Blue}\huge\boxed{Answer} [/tex]
The potential environmental impacts associated with solar power—land use and habitat loss, water use, and the use of hazardous materials in manufacturing—can vary greatly depending on the technology, which includes two broad categories: photovoltaic (PV) solar cells or concentrating solar thermal plants (CSP).
Explanation:
I just answer the second question
Calories are a unit of energy that are reserved for heat energy but can be
directly converted to and from mechanical units of energy (Joules). How
many calories of energy are there in 500 Joules of energy?
SIENCE! help please its due yesterday and i didn’t do it :(
Answer: H
the lights travel through the mirr to create a bigger wider light.
hope this helps (:
Brent’s doctor recommended that he avoid hot baths while he and his wife are trying to have a child. Why did the doctor most likely make this recommendation?
Exposing the testicles to high temperatures could lead to problems
with maintaining erections.
Exposing the testicles to high temperatures could lead to problems
with producing sperm.
Exposing the testicles to high temperatures could lead to problems
with ejaculating.
Exposing the testicles to high temperatures
Answer:
Exposing the testicles to high temperatures could lead to problems
with producing sperm.
Explanation:
got it correct on the edge unit test review
Brent's doctor most likely recommended that he avoid hot baths because exposing the testicles to high temperatures could lead to problems with producing sperm.
What is sperm?The sperm is the male reproductive cell that is produced in the testes and stored in the epididymis.
The testicles (testes) of the male is located outside the body as the temperature of the body is too high for the viability of the sperm.
Therefore, exposing the testicles to high temperatures could lead to problems with producing sperm.
Learn more about sperm here:
https://brainly.com/question/25282799
#SPJ2
A molecule with a charge of 9 x 10-8 C is moving with a velocity of 7 x 107 m/s perpendicular to a magnetic field with a value of 0.57 Tesla. What is the magnitude force (in N) on the molecule?
Answer:
3.591 N
Explanation:
Applying,
F = Bvq................. Equation 1
Where F = magnitude of force on the molecule, B = Magnetic field, v = Velocity of the molecule, q = charge of the molecule.
From the question,
Given: B = 0.57 Tesla, q = 9×10⁻⁸ C, v = 7×10⁷ m/s
Substitute these values into equation 1
F = 0.57×9×10⁻⁸×7×10⁷
F = 35.91×10⁻¹
F = 3.591 N
Hence the force on the molecule is 3.591 N
In free fall, where does an object have the slowest speed? *
O Vi
O vf
Vtop
O more than one is correct
Answer:
vi and vtop = 0
Explanation:
Free fall is a motion of a body in which the only force acting of the body is the Gravitational Force. In this motion body moves with constant acceleration i.e acceleration due to gravity.
When an object is thrown downward from a non zero height say h the motion is referred to as free fall with initial velocity of object beign zero. Hence v=0
In free fall, an object have the slowest speed at the beginning of the motion which is at the top before the object starts to fall. [tex](V_i \ and \ V_{top})[/tex]
During a free fall, the object subjected to only acceleration due to gravity. The velocity of object increases as the object moves downwards and eventually becomes maximum before the object hits the ground.
The final velocity of the object is the greatest while the initial velocity of the object at the top before the free fall is the slowest.
[tex]V_f > V_i \ or\ V_{top}[/tex]
Thus, we can conclude that during a free fall, the velocity of the object increases downwards. The slowest speed can found at the beginning of the motion.
Learn more here:https://brainly.com/question/11698474
the ice and steam point on a thermometer are found to be 96ml apart. what temperature is recorded when the length of mercury thread is 33.6ml above the ice point
Answer:
33.6 / 96 is the fraction of the temperature between ice and freezing
33.6 / 96 = .35
So C = .35 * 100 = 35 deg C where the ice point would be 0 deg C
You can convert C to F
F = 9 / 5 * C + 32 = 9/5 * 35 + 32 = 95 deg F
PLEASE HELP ASAP!
A machine has an efficiency of 70%. What happens to the other 30% of the work?
Answer:
The other 30% is lost from friction.
Explanation:
friction 30% ---> |O| <------ 70% work
A machine has an efficiency of 70%, and the remaining 30% of the input work is lost as waste energy or dissipated in the form of heat, noise, or vibration, which cannot be harnessed to do any useful work.
What is work done by machine?In any machine, the total work input is equal to the total work output plus any work that is lost or dissipated due to various factors such as friction, heat transfer, etc., so, for example, if a machine receives 100 units of energy as input, only 70 units of energy are converted into useful output work, and the remaining 30 units of energy are lost as waste energy.
Hence, the remaining 30% of the input work is lost as waste energy or dissipated in the form of heat, noise, or vibration, which cannot be harnessed to do any useful work.
Learn more about the work by machine here.
https://brainly.com/question/15365822
#SPJ6
Calculate the speed of an object that travels 75m in 15s.
1.A body of mass 10kg falling freely was found to be falling at a rat of 20m/s what force will stop the body in 2second?
Answer:
50N
Explanation:
force it is falling with can be found by mass into acceleration and then devide by half to find force that could stop it in 2 sec
A.) A gemstone of mass 1.8 kg compresses a scale's spring by 2.6 cm.
Determine the spring constant.
B.) How much would the spring in the previous question compress if a 5.2 kg mass was placed on the scale?
Explanation:
Given that,
Mass, m = 1.8 kg
Compression, x = 2.6 cm
We know that,
Force on spring = weight
So,
[tex]mg=kx[/tex]
Where
k is spring constant
[tex]k=\dfrac{mg}{x}\\\\k=\dfrac{1.8\times 9.8}{2.6\times 10^{-2}}\\\\k=678.46\ N/m[/tex]
(2) If m = 5.2 kg
[tex]x=\dfrac{mg}{k}\\\\x=\dfrac{1.8\times 9.8}{678.46}\\\\x=2.6 \ cm[/tex]
Hence, this is the required solution.
Prominences and sunspots are both:
A. Jets of burning gas
B. Patches on the Sun's surface
C. Influenced by the Sun's electromagnetic field
D. Visible during an eclipse
Answer:
C. Influenced by the Sun's electromagnetic field
Explanation:
"Sunspots occur in pairs because each is one side of a loop of the Sun's magnetic field that reaches the Sun's surface. Solar prominences are the plasma loops that connect two sunspots."
Two ice skaters, with masses of 40.0 kg and 65.0 kg , are at the center of a 50.0 m -diameter circular rink. The skaters push off against each other and glide to opposite edges of the rink. Part A If the heavier skater reaches the edge in 10.0 s , how long does the lighter skater take to reach the edge
Answer:
6.15 s
Explanation:
From the question,
Applying the law of conservation of momentum
Momentum of the Heavier skater = Momentum of the lighter skater.
Mv = mV................. Equation 1
Where M = mass of the heavier skater, m = mass of the lighter skater, v = Velocity of heavier skater, V = velocity of the lighter skater.
But,
v = r/t........................ Equation 2
V = r/t'................ Equation 3
Where r = radius of the circular rink, t = time taken for the heavier skater to reach the edge, t' = time taken for the lighter skater to reach the edge.
Substitute equation 2 and equation 3 into equation 1
M(r/t) = m(r/t')............. Equation 4
Given: M = 65 kg, m = 40 kg, r = 50/2 = 25 m, t = 10 s.
Substitute into equation 4 and solve for t'
65(25/10) = 40(25/t')
162.5 = 1000/t'
t' = 1000/162.5
t' = 6.15 seconds
An iron wire has a length of 1.50 m and a cross sectional area of 0.450 mm2. If the resistivity of iron is 10.0 ✕ 10−8 Ω · m and a potential difference of 0.800 V is maintained across its length, determine the current in the wire (in A)
Answer:
2400A
Explanation:
R=pL/A
R-Resistance
p-Resistivity=10.0 x 10^-8
L-1.5m
A-Cross sectional Area=0.00045
R=10.0 x 10^-8 x 1.5 ÷ 0.00045
and=0.000333333
I-current
V-potential difference
I=V/R
0.800÷0.000333333
Ans=2400A
HELP PLEASEE
when a person receives an electric shock from wires , is he most affected by a spark, corona, arc or humus solution?
Answer:
Usually an eletric shock. You can be left with numbness and MAYBE problems with your eyes.
Explanation:
A woman has one damaged fallopian tube. The damage completely blocks the opening of the tube at the ovary. How will this most likely affect her fertility?
Her likelihood of conceiving will be reduced by at least 50%.
Her eggs, if fertilized, will not implant properly.
Her eggs will not mature inside the ovary.
Her chances of conceiving twins will be doubled.
Answer:Her likelihood of conceiving will be reduced by at least 50%.
Explanation:
EDGE 2020
Answer:
Her likelihood of conceiving will be reduced by at least 50%
Explanation:
took the test on edge, got it right
Question 1 of 10 Which characteristic of nuclear fission makes it hazardous?
O A. The process destroys every atomic nucleus that goes through it.
O B. The process changes existing atoms into atoms of different elements
C. The process requires very high pressures.
O D. The radioactive wastes it produces can spread to any part of the environment
Answer:
D.
The radioactive wastes it produces can spread to any part of the environment.
Explanation:
Fission is the name given to the splitting of a heavy nucleus into two medium-mass nuclei. Fission is said to be induced if it results from the absorption of a neutron to form an unstable nucleus that decays by fission. The induced fission usually produces further neutrons accompanying the fission fragments.
Answer: D. The radioactive wastes it produces can spread to any part of the environment
Explanation:
A soft drink (mostly water) flows in a pipe at a beverage plant with a mass flow rate that would fill 220 0.355 - L cans per minute. At point 2 in the pipe, the gauge pressure is 152kPa and the cross-sectional area is 8.00cm2. At point 1, 1.35m above point 2, the cross-sectional area is 2.00cm2. Part A Find the mass flow rate. M
Answer:
[tex]1.302\ \text{kg/s}[/tex]
Explanation:
[tex]\rho[/tex] = Density of water = [tex]1\ \text{kg/L}[/tex]
[tex]dV[/tex] = Change in volume = [tex]220\times 0.355\ \text{L}[/tex]
[tex]dt[/tex] = Time elapsed = 1 minute = 60 seconds
Mass flow rate is given by
[tex]\dot{m}=\rho\dfrac{dV}{dt}\\ =1\times \dfrac{220\times 0.355}{60}\\ =1.302\ \text{kg/s}[/tex]
The mass flow rate is [tex]1.302\ \text{kg/s}[/tex].
A wave has a frequency of 30Hz and wave length of 40cm. What is the velocity of the wave?
Answer:
12m/s
Explanation:
v=fλ
30×(40÷100)=
12m/s
A 45.7 kg woman starts from rest at the bottom of a flight of stairs that has
a total height of 2.54 meters. She reaches the top of the stairs
in 5.00 seconds. How much power does she generate if she is moving at
2.63 m/s at the top of the stairs? Use g = 9.8 m/s2, and only include 3
numbers in your answer.
Answer:
The power generated by the woman is 259 W
Explanation:
Given;
mass of the woman, m = 45.7 kg
initial velocity of the woman, u = 0
total height ascended by the woman, h = 2.54 m
time of the woman's motion, t = 5.0 s
final velocity of the woman, v = 2.63 m/s
acceleration due to gravity, g = 9.8 m/s²
The potential energy of the woman due to the height she ascended;
P.E = mgh
P.E = 45.7 x 9.8 x 2.54
P.E = 1137.564 J
The kinetic energy of the woman due to her final velocity;
K.E = ¹/₂mv²
K.E = ¹/₂ x 45.7 x (2.63)²
K.E = 158.051 J
The total mechanical energy of the woman at the top of the stairs;
M.E = P.E + K.E
M.E = 1137.564 J + 158.051 J
M.E = 1295.615 J
The power generated by the woman;
Power = Energy/time
Power = 1295.615 J / 5 s
Power = 259.123 W
Power = 259 W