Answer:
Deep ocean trenches, volcanoes, island arcs, submarine mountain ranges, and fault lines are examples of features that can form along plate tectonic boundaries. Volcanoes are one kind of feature that forms along convergent plate boundaries, where two tectonic plates collide and one moves beneath the other.
Explanation:
I hope it's help u
Please brainiest
Someone please help me
Answer:reflection
Explanation:
Mole ratios used for conversions come from?
Which of the following is NOT TRUE for both mitosis and meiosis?
a they both preceded by interphase
b. they both split cells thru cytokinesis
c. they divide according to a common pathway
d. they are both involved in the division of somatic cells
Answer:
d. they are both involved in the division of somatic cells
Explanation:
Mitosis and meiosis are both types of cell divisions that occur in the system of living organisms. However, mitosis and meiosis are different in the type and number of daughter cells they give rise to and also where they occur.
Mitosis, which takes place in the SOMATIC OR BODY CELLS of living organisms, give rise to two daughter cells that are genetically identical to their parent cell. On the other hand, meiosis takes place strictly in the CELLS OF REPRODUCTIVE ORGANS, and gives rise to four genetically different daughter cells.
In the equation C H4 + O2 C O2 + H2 O, what are the products?
A) C H4 + H2 O
B) C O2 + H2 O
C) O2 C O2
D) C H4 + O2
Answer:
Option B clearly shows the Products of the reaction
Explain the reason that the atomic emission spectrum of hydrogen contains only four lines.
A)
The hydrogen atoms form a continuous series of quantized energy levels
that transmute at a variety of frequencies.
B)
Hydrogen atoms contain a limited number of quantized energy levels that
emit radiation at a limited number of frequencies.
C)
Many hydrogen atoms accomodate an array of quantized energy levels that
can release energy at a progression of frequencies.
A hydrogen atom consists of a sequence of quantized energy levels that
incorporate radiation only from consecutive frequencies.
D)
Answer:
Though a hydrogen atom has only one electron, it contains a large number of shells, so when this single electron jumps from one shell to another, a photon is emitted, and the energy difference of the shells causes different wavelengths to be released... hence, mono-electronic hydrogen has many spectral lines.
Explanation:
thank me later
The reason that the atomic emission spectrum of hydrogen contains only four lines is the hydrogen atoms form a continuous series of quantized energy levels that transmute at a variety of frequencies.
What is atomic emission spectrum of hydrogen?The emission spectrum of hydrogen consist of numerous spectral series, the wavelength is postulated by Rydberg formula.
The reason behind the lines of spectrum is the transition of electron between two energies.
Thus, the correct option is A.
Learn more about atomic emission
https://brainly.com/question/11289486
#SPJ2
PLEASE HELP
Which chemical reaction supports the Law of Conservation of Mass?
Answer:A
Explanation:
A Starting substance in a chemical reaction is called a _______________.
1. reactant
2. product
3. chemical reaction
4. physical reaction
Answer:
1.)REACTANT
These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.Another term for natural radioactive decay into another element is
Answer:
The process of unstable (or radioactive) atoms becomes stable by emitting radiation. This event over time is called radioactive decay. Alpha decay results in the loss of two protons and two neutrons from the nucleus
Answer:
radioactive disintegration
Explanation:
Pls answer this Il give brainiest question in picture ty
Answer:
c
Explanation:
troposphere is the answer
The interaction of the skeletal and muscular systems to create movement and locomotion is regulated by which organ system?
Answer:
The muscoloskeletal system
Explanation:
The musculoskeletal system is made up of the body's bones (the skeleton), muscles, cartilage, tendons, ligaments, joints, and other connective tissue that supports and binds tissues and organs together. Its primary functions include supporting the body, allowing motion, and protecting vital organs.
The volume of a gas is 2250 mL at 290 kPa what will the volume be when the pressure is reduced to .9 atm
Answer:
7178.22 mL
Explanation:
Applying,
PV = P'V'................. Equation 1
Where P = Initial pressureof gas, V = Initial volume of gas, P' = Final pressure of gas, V' = Final volume of gas.
make V' the subject of the equation
V' = PV/P'.............. Equation 2
From the question,
Given: V = 2250 mL, P = 290 kPa, P' = 0.9 atm = (101×0.9) = 90.9 kPa
Substitute these values into equation 2
V' = (2250×290)/90.9
V' = 7178.22 mL
is how much a material opposes electric current.
*
insulator
conductor
resistance
short circuit
Answer:
Resistance
Explanation:
Resistance is the measure of the opposition of current in a circuit.
17. A scientist determines an unknown metallic sample to have 77 protons and 77 electrons with a mass number of 192. How many neutrons does one
metal atom contain?
Answer:
Ok so hot u hahaha
Explanation:
Hshshhdhdi jsushshshshshhdhdhd hshshshshsh hdhdhdhd hdhdhdhd hdhdh
How many grams of LiF are needed to make 87 g LiF solution into a
34.5% solution?
solution?
answer options:
30 g LIF
0.01 g LIF
45.8 g LIF
0.02 g LIF
Answer: 30 g LiF
Explanation:
Most of the electricity that is used in everyday life comes from________ current.
Fill in the blank
Answer:
electric is your answer :)
Explanation:
Edge STEM instruction/assignment perhaps???
Answer:
A. C (alternate current)
Which of the following best describes asexual reproduction?
it produces offspring with a large amount of genetic variation
it occurs in simple organisms, such as bacteria, but not in multicellular organism such as plants and animals
it allows species to quickly adapt to environmental changes
it can be an advantage to organisms that live in a stable unchanging environment
Answer:
First Choice
it produces offspring with a large amount of genetic variation
Answer: i think this is correct.
Explanation: it occurs in simple organisms, such as bacteria, but not in multicellular organism such as plants and animals
where do fossils live
When temperature drops, (for example from 20 degrees celsius to 10 degrees celsius)
a.) energy increases
b.) particles move slower
c.) particles collide more often
d.) pressure increases
Answer:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Explanation:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
which is following is used to cook food?
Answer: A process of cooking food in a pot made from unglazed and natural clay. coddling: Heating food in water kept just below the boiling point.
Explanation:
plz help me solve this question is it A,B,C or D
Hydrochloric acid reacts with sodium hydroxide to form sodium chloride (the salt) and water. Sodium chloride is made up of Na+ cations from the base (NaOH) and Cl- anions from the acid (HCl). HCl+NaOH→H2O+NaCl.
What is the mass of oxygen in 1 mole of NaHCO3?
Answer:
48.00
Explanation:
3 oxygen (15.99 x 3)= 48
If 10.0 grams of sodium phosphate are reacted, what mass of barium nitrate is
required?
Answer: The mass of barium nitrate required is 23.91 g
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of sodium phosphate = 10.0 g
Molar mass of sodium phosphate = 163.94 g/mol
Plugging values in equation 1:
[tex]\text{Moles of sodium phosphate}=\frac{10.0g}{163.94g/mol}=0.061 mol[/tex]
The chemical equation for the reaction of sodium phosphate and barium nitrate follows:
[tex]3Ba(NO_3)_2+2Na_3PO_4\rightarrow Ba_3(PO_4)_2+6NaNO_3[/tex]
By the stoichiometry of the reaction:
If 2 moles of sodium phosphate reacts with 3 moles of barium nitrate
So, 0.061 moles of sodium phosphate will react with = [tex]\frac{3}{2}\times 0.061=0.0915mol[/tex] of barium nitrate
Molar mass of barium nitrate = 261.337 g/mol
Plugging values in equation 1:
[tex]\text{Mass of barium nitrate}=(0.0915mol\times 261.337g/mol)=23.91g[/tex]
Hence, the mass of barium nitrate required is 23.91 g
When 1 mol of methane is burned at constant pressure, −890 kJ/mol of energy is released as heat. If a 1.67 g sample of methane is burned at constant pressure, what will be the value of ∆H
Answer:
[tex]\Delta H=-92.7kJ[/tex]
Explanation:
Hello there!
In this case, according to the given information, we can infer that 890 kJ of energy are released when 1 mole of methane is burned; however, to find the total heat when 1.67 grams are burned, we first need to calculate the moles in this mass of methane:
[tex]1.67gCH_4*\frac{1molCH_4}{16.04gCH_4}=0.104molCH_4[/tex]
And thus, for calculating the resulting ∆H, we proceed as follows:
[tex]\Delta H=-890kJ/mol*0.104mol\\\\\Delta H=-92.7kJ[/tex]
Regards!
I have prepared a caffeine stock solution of 0.075 M. What volume should we mix with
distilled water in order to reach a standard solution of 0.0015 M and a final volume of 10
mL?
a) 0.2 mL
b) 112.5 mL
c) 50 mL
d) 2 mL
PLEASE HELP!
No Links!
I will award brainliest to the first person to answer
Answer:
I think 50 ml but I am not sure
sorry
which one of these three elements conatain the most protons
A.copper
B. radon
C. sodium
Answer:
i think it's B sorry if i'm wrong
How many grams of NaCl are in 1.25 X 1024
molecules of Naci? Use one decimal place
Answer:
121.1g
Explanation:
First, we need to convert the number of molecules of NaCl to moles (n) by dividing by Avagadro number
That is, n = number of molecules ÷ 6.02 × 10²³
n = 1.25 X 10²⁴ ÷ 6.02 × 10²³
n = 1.25/6.02 × 10^ (24-23)
n = 0.207 × 10¹
n = 2.07moles
Using the formula; mole = mass ÷ molar mass
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
mass = molar mass × mole
mass = 58.5 × 2.07
mass = 121.1g
Any change in average weather conditions on Earth that lasts for at least several decades is called
Answer:climate change
Explanation:
ASAP:
The estimated atomic mass of silicon could be Choose... amu because the Choose.. abundant isotope is Choose...
Answer:
The estimated atomic of silicon is 28.082 a.m.u.
Explanation:
The estimated atomic mass of silicon ([tex]M_{Si, est}[/tex]), in a.m.u., is equal to the weighted average of atomic masses of silicon available in nature and in terms of their abundances:
[tex]M_{Si, est} = r_{1}\cdot M_{Si-28} + r_{2} \cdot M_{Si-29} + r_{3}\cdot M_{Si-30}[/tex] (1)
Where:
[tex]r_{1}[/tex], [tex]r_{2}[/tex], [tex]r_{3}[/tex] - Relative abundance of each isotope, no unit.
[tex]M_{Si-28}[/tex], [tex]M_{Si-29}[/tex], [tex]M_{Si-30}[/tex] - Atomic mass of each isotope, in a.m.u.
If we know that [tex]M_{Si-28} = 27.976\,a.m.u.[/tex], [tex]M_{Si-29} = 28.976\,a.m.u.[/tex], [tex]M_{Si-30} = 29.974\,a.m.u.[/tex], [tex]r_{1} = \frac{92.22}{100}[/tex], [tex]r_{2} = \frac{4.68}{100}[/tex] and [tex]r_{3} = \frac{3.09}{100}[/tex], then the estimated atomic mass of silicon is:
[tex]M_{Si, est} = r_{1}\cdot M_{Si-28} + r_{2} \cdot M_{Si-29} + r_{3}\cdot M_{Si-30}[/tex]
[tex]M_{Si,est} = \left(\frac{92.22}{100} \right)\cdot (27.976\,a.m.u.) + \left(\frac{4.68}{100} \right)\cdot (28.976\,a.m.u.) + \left(\frac{3.09}{100} \right)\cdot (29.974\,a.m.u.)[/tex]
[tex]M_{Si, est} = 28.082\,a.m.u.[/tex]
The estimated atomic of silicon is 28.082 a.m.u.
que tipo de fermentacion es al mezclar el agua tibia con levadura
Answer:
kapsüsnwsibd bqvw j dkpövahfbjbjwv8kfb
If 250. ML of water are poured into the measuring cup, the volume reading is 8.45 oz . This indicates that 250. ML and 8.45 oz are equivalent. How many milliliters are in a fluid ounce based on this data?
Answer:
[tex]1oz=29.589ml[/tex]
Explanation:
From the question we are told that:
Initial Volume [tex]v_1=250ml[/tex]
Final Volume [tex]v_2=8.45oz[/tex]
Generally the equation for one ounce is mathematically given by
[tex]1oz=\frac{v_1}{v_2}[/tex]
Therefore
[tex]1oz=\frac{250}{8.45}[/tex]
[tex]1oz=29.589ml[/tex]