Answers
----------------
Answer:
i believe it would be C
Explanation:
Related Questions
You push a 1.5 kg ball across a desk for 2 seconds, so that 10 J of work have been done. How much power was produced?
Answer
Answers
Answer:
i need help with the same question
Explanation:
A student at a polymer lab conducted a stress-relaxation experiment on a polymer, whose material response can be modeled by the Maxwell model. In the experiment, a 10-cm-long bar was stretched instantly until the stress reached 200 MPa. After 2 min, the measured stress in the bar was 160 MPa. a) Calculate the relaxation time constant of the polymer. b) If the initial stress was reached by stretching the bar by 16 mm, what is the viscosity of the dashpot in the Maxwell model
Answers
Answer: add 10 cm plus 200 mpa divided by 2 min then caculate that into 160 bars.
Explanation:
a) The relaxation time constant of the polymer is approximately 8.9 min.
b) The viscosity of the dashpot in the Maxwell model is approximately 4.55 GPa s.
What is the stress-relaxation model?The stress-relaxation response of the Maxwell model can be modeled by the following equation:
σ(t) = σ₀ exp(-t/τ)
where σ₀ is the initial stress, τ is the relaxation time constant, and t is the time.
a) The relaxation time constant of the polymer:
σ(2 min) = 160 MPa
σ₀ = 200 MPa
160 MPa = 200 MPa exp(-2 min/τ)
Taking the natural logarithm of both sides, we get:
ln(160/200) = -2 min/τ
Solving for τ, we get:
τ = -2 min / ln(160/200) ≈ 8.9 min
Therefore, the relaxation time constant of the polymer is approximately 8.9 min.
b) The displacement of the spring in the Maxwell model can be modeled by the following equation:
x(t) = (σ₀ / G) (1 - exp(-t/τ))
where G is the shear modulus of the polymer. We can use this equation and the given displacement of 16 mm to find the viscosity of the dashpot:
x(t) = 16 mm = 0.016 m
σ₀ = 200 MPa
τ = 6.09 min = 365.4 s
Assume that the shear modulus of the polymer is constant and use the given stress to find it:
G = σ₀ / γ
where γ is the strain induced by the stretching.
Since the bar was stretched by 16 mm and its original length was 10 cm (i.e., 100 mm), the strain is:
γ = 16 mm / 100 mm = 0.16
Therefore,
G = 200 MPa / 0.16 = 1250 MPa
Now we can solve for the viscosity of the dashpot:
η = σ₀τ / x(t)
= (200 MPa) (365.4 s) / (0.016 m)
≈ 4.55 GPa s
Therefore, the viscosity of the dashpot in the Maxwell model is approximately 4.55 GPa s.
Learn more about the stress-relaxation model here:
https://brainly.com/question/30558828
#SPJ2
When you are doing either a chest or a bounce pass where are your thumbs at the end of the
motion?
Answers
Answer:
yes
Explanation:
PLS HELP
SHOW WORK
A car starting from rest accelerates at a rate of 1.5 m/s ^ 2 What is its final speed at the end of 18.0 seconds ?
Answers
Answer:
27 ms^-1
Explanation:
by using v= u + at
u = 0 ( because the object id starting from rest)
v= 0 + 1.5 x 18
v = 27 ms^-1
What variables affect density weight,conductivity,color,volume, or mass
Answers
Answer:
Density is affected by volume and mass.
Explanation:
Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.
4. Name three examples of "concentrated" forms of energy.
Answers
Answer:
Nuclear power plant.
Gas stove.
Dam.
Gas pump.
Geothermal heat pump.
Power lines.
Solar panels.
Windmills.
Explanation:
Hope this helps :))
Answer:
gasoline,solar panels,geothermal heat pump,windmills
Explanation:
What factors determine electric potential?
A. Mass and distance
B. Charge and density
C. Charge and distance
O D. Mass and charge
Answers
Answer: C. Charge and distance
If an object is placed at distance of 16cm from a plane mirror, How far would it be from it's image?
Answers
Explanation:
A plane mirror always creates an image with the same distance to the mirror as the object, only in the other direction. So both of them have a distance of 10cm, one is 10cm to the left, one 10cm to the right, thus their mutual distance is 20cm
19. In a turtle race, a 20 kg turtle moves with a velocity of 0.1 m/s. What is the kinetic energy of the turtle?
A. 20 J
B. 0.2 J
C. 0.1 J
Answers
C
Explanation:
KE=1/2mv^2
KE=1/2(20)(0.1)^2
0.1^2= 0.01
KE= 1/2(20)(0.01)
KE= 0.1 J
g Design an experiment you can use to determine the mass of the metal cylinder. When you explain your experiment, be sure to mention: What is the underlying model (equation) that you can use to determine the mass from your measurements
Answers
Answer:
m = [tex]\frac{k}{g}[/tex] x,
graph of x vs m
Explanation:
For this exercise, the simplest way to determine the mass of the cylinder is to take a spring and hang the mass, measure how much the spring has stretched and calculate the mass, using the translational equilibrium equation
F_e -W = 0
k x = m g
m = [tex]\frac{k}{g}[/tex] x
We are assuming that you know the constant k of the spring, if it is not known you must carry out a previous step, calibrate the spring, for this a series of known masses are taken and hung by measuring the elongation (x) from the equilibrium position, with these data a graph of x vs m is made to serve as a spring calibration.
In the latter case, the elongation measured with the cylinder is found on the graph and the corresponding ordinate is the mass
HELP
HELP
SORRY TO BEG :/
HELP ASAP :) PLZ
Answers
Answer:
It's b because he discovered galaxies .
The (BLANK) island were where Darwin made many important observations.
Answers
Answer:
I know theirs South American coast he was there a lot
When a rocket is 4 kilometers high, it is moving vertically upward at a speed of 400 kilometers per hour. At that instant, how fast is the angle of elevation of the rocket increasing, as seen by an observer on the ground 5 kilometers from the launching pad
Answers
Answer:
The angle of elevation of the rocket is increasing at a rate of 48.780º per second.
Explanation:
Geometrically speaking, the distance between the rocket and the observer ([tex]r[/tex]), measured in kilometers, can be represented by a right triangle:
[tex]r = \sqrt{x^{2}+y^{2}}[/tex] (1)
Where:
[tex]x[/tex] - Horizontal distance between the rocket and the observer, measured in kilometers.
[tex]y[/tex] - Vertical distance between the rocket and the observer, measured in kilometers.
The angle of elevation of the rocket ([tex]\theta[/tex]), measured in sexagesimal degrees, is defined by the following trigonometric relation:
[tex]\tan \theta = \frac{y}{x}[/tex] (2)
If we know that [tex]x = 5\,km[/tex], then the expression is:
[tex]\tan \theta = \frac{y}{5}[/tex]
And the rate of change of this angle is determined by derivatives:
[tex]\sec^{2}\theta \cdot \dot \theta = \frac{1}{5}\cdot \dot y[/tex]
[tex]\frac{\dot \theta}{\cos^{2}\theta} = \frac{\dot y}{5}[/tex]
[tex]\frac{\dot \theta\cdot (25+y^{2})}{25} = \frac{\dot y}{5}[/tex]
[tex]\dot \theta = \frac{5\cdot \dot y}{25+y^{2}}[/tex]
Where:
[tex]\dot \theta[/tex] - Rate of change of the angle of elevation, measured in sexagesimal degrees.
[tex]\dot y[/tex] - Vertical speed of the rocket, measured in kilometers per hour.
If we know that [tex]y = 4\,km[/tex] and [tex]\dot y = 400\,\frac{km}{h}[/tex], then the rate of change of the angle of elevation is:
[tex]\dot \theta = 48.780\,\frac{\circ}{s}[/tex]
The angle of elevation of the rocket is increasing at a rate of 48.780º per second.
A city near the ocean experiences thunderstorms on a frequent basis. Which of these is the BEST explanation for this?
A.
The interactions of the waves with the landmass change the air pressure to cause thunderstorms.
B.
The cold fronts that form only over coastal areas cause thunderstorms.
C.
The amount of sunshine received by coastal areas causes thunderstorms.
D.
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.
Answers
Answer:
d
Explanation:
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms. So, option D is correct.
What is meant by heat energy ?Heat energy of a system is defined as the energy transferred between the molecules due to the temperature difference between them. Heat energy is the energy responsible for the temperature of the molecules.
Here,
A city near the ocean experiences thunderstorms on a frequent basis. This is because,
The atmosphere near to the land is highly humid and warm and thus creates a relatively low pressure in the land. In order to balance the pressure variation the air from the oceans make movements towards the land, and as a result, sea breeze are formed. During the evenings when the water in the ocean is more warm and when land begins to cool, the air from land rushes towards the sea, in order to balance the pressure variation occurred here. This makes the air above the ocean highly humid and thus would lead to the formation of thunderstorms.
Hence,
The uneven heating of land and water in coastal areas creates fronts that cause thunderstorms.
To learn more about heat energy, click:
https://brainly.com/question/29210982
#SPJ2
What us a magnetic domain?
Answers
magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction.
(iii) Gareth cycles 5 laps at this constant spoed. Each lap is 500m.
Calculate the distance he travels.
I
Distance
Answers
Answer:
2500 m
Explanation:
Given that,
Each lap is 500 m
Gareth takes 5 laps.
We need to find distance traveled by Gareth. The distance covered by him is given by :
d = 5×500
d = 2500 m
Hence, he will travel 2500 m.
Problem 05.086 - Water pumped from a lower reservoir to a higher reservoir Water is pumped from a lower reservoir to a higher reservoir by a pump that provides 21 kW of useful mechanical power to the water. The free surface of the upper reservoir is 45 m higher than the surface of the lower reservoir. If the flow rate of water is measured to be 0.03 m3/s, determine the irreversible head loss of the system and the lost mechanical power during this process. Take the density of water to be 1000 kg/m3. The irreversible head loss of the system is 26.35 m. The lost mechanical power in this process is kW.
Answers
Answer:
Lost Mechanical Power = 7.7565 KW
Head Loss = 26.35 m
Explanation:
First, we will find the useful mechanical power used to transport water to the higher reservoir:
[tex]P_{useful} = \rho ghV[/tex]
where,
P_useful = Useful mechanical Power = ?
ρ = density of water = 1000 kg/m³
g = acceleration due to gravity = 9.81 m/s²
h = height = 45 m
V = Volume flow rate = 0.03 m³/s
Therefore,
[tex]P_{useful} = (1000\ kg/m^3)(9.81\ m/s^2)(45\ m)(0.03\ m^3/s)\\P_{useful} = 13243.5\ W = 13.2435\ KW[/tex]
Now, the lost mechanical power will be:
[tex]Lost\ Mechanical\ Power = Total\ Mechanical\ Power - Useful\ power\\Lost\ Mechanical\ Power = 21\ KW - 13.2435\ KW\\[/tex]
Lost Mechanical Power = 7.7565 KW
Now, for the head loss:
[tex]Lost\ Mechanical\ Power = \rho g(Head\ Loss)V\\Head\ Loss = \frac{Lost\ Mechanical\ Power}{\rho gV} \\\\Head\ Loss = \frac{7756.5\ W}{(1000\ kg/m^3)(9.81\ m/s^2)(0.03\ m^3/s)} \\[/tex]
Head Loss = 26.35 m
Which type of electricity is a one-time event, caused by unbalanced charges trying to become neutral again?
Answers
Answer: yes
Explanation:
Name the principle which states that energy
cannot be created or destroyed, merely
transferred from one form to another:
Answers
Answer:
the Laws of Thermodynamics
Explanation:
these laws states that no form of energy can be created by anyone or anything, without a previous and equal input of energy being put in, that energy can only be transferred from object to object and through different forms
Example: the way a heater runs to warm up an area, that is the process of electrical energy, or energy stored in propane being converted into heat energy
this law is universally implied and has been proven on multiple accounts to be true, in no way can you create energy out of thin air, all you can do is transform and transfer it
hope this is what you was going for, very good point in science
this is one of two correct answers, the other answer to this question is also correct
What is the acceleration of a 7 kg object if a force of 63 N is applied?
Answers
Answer:
9m/s^2
Explanation:
F=ma
a=F/m
a=63/7
a=9m/s^2
ANSWER SOON
3. Let's say we have 3 kg of iron at 100 C, and it touches a 15kg iron at 20 C. Explain what is going to happen in detail in terms of internal energy, temperature, and heat. (you can explain it with just words)
Answers
Answer:
one of the mjor effects of heat transfer is temperature change
Explanation:
simple answer
Which of the following is a contact force?
Magnetic
Friction
Electric
Gravity
Answers
Answer:
magnetic
Explanation:
because magnetic attracted other magnetic by pulling them contact forcely that creates a strong force when they are nearly close to one another
Help please :)
X-ray waves are transmitted by ....... ?
Answers
Answer:
im not sure maybe viberation
Explanation:
Answer:
X-ray waves are transmitted by ....... body tissues with very little absorption
Hope it helps
Please mark me as the brainliest
Thank you
He-Ne Laser device emits photons of wave length 632.8 nm by rate 4.5 x 1020 photon/s, so
the power of the laser beam =
a. 3.14 W
b. 141.3 W
c. 314.1 w
d. 431.4 W
Answers
Answer: Option b.
Explanation:
We know:
Wavelength = 632.8 nm
Fluence = 4.5*10^20 photon/s
The energy of a single photon of wavelength λ is:
E = (h*c)/λ
where:
h = 6.6*10^(-34) J*s
c = 3*10^8 m/s
And we should rewrite the wave length in meters, so:
λ = 632.8 nm = 632.8*10^(-9) m
replacing these in the energy equation, we get:
E = (6.6*10^(-34)J*s)*(3*10^8 m/s)/(632.8*10^(-9) m) = 3.13*10^(-19) J
So each one of the 4.5x10^20 photon that flow each second have this energy, then the power is:
P = (3.13*10^(-19) J)*(4.5*10^20 /s) = 140.85 J/s
and 1 W = 140.85 J/S
Then the power is:
P = 140.85 W
Then the correct answer is the option b, where the units are a little bit different than mine because I used really simplified values for c and h.
Lichen grows on the surface of hornblende granite and causes it to breakdown at a faster rate. This is an example of. _______ Weathering
Answers
Answer:
Chemical.
Explanation:
Weathering can be defined as the physical and chemical breakdown of rock into smaller pieces called sediment. Weathering can be classified into two categories namely;
I. Physical weathering : it is the process of breaking rocks into pieces without affecting its chemical composition e.g temperature, abrasion and frost action.
II. Chemical weathering : it is the process of breaking rocks into pieces by chemical action which leads to changes in its chemical composition e.g carbonation, hydration, plant acid and oxidation.
In this scenario, Lichen grows on the surface of hornblende granite and causes it to breakdown at a faster rate. Thus, this is an example of chemical weathering
Question 1 of 10
Which object has the most gravitational potential energy?
A. A 8 kg book at a height of 2 m
B. An 8 kg book at a height of 3 m
C. An 5 kg book at a height of 3 m
D. A5 kg book at a height of 2 m
SUBMIT
Answers
Answer:
B = An 8 kg book at a height of 3 m
Which graph illustrates constant speed?
A
B
C
D
I will reward you
Answers
Answer:
D because the line isn't changing which means constant speed it's going at the same rate so yea it's D
Answer:
D.
Hope that helps!?
Explanation:
if you ride a bike at 2 km/h and travel a total distance of 20km, how long willnit takr ( in second) you to teach your destination
Answers
Time = (20 km) x (1 hr/2 km) x (3,600 sec/hr)
Time = (20 x 1 x 3,600 km-hr-sec) / (2 km-hr)
Time = (20 x 1 x 3,600 / 2) (km-hr-sec / km-hr)
Time = 36,000 seconds
(That's 10 hours.)
Two teams of nine members each engage in a tug of war. Each of the first team's members has an average mass of 64 kg and exerts an average force of 1350 N horizontally. Each of the second team's members has an average mass of 69 kg and exerts an average force of 1367 N horizontally. (a) What is the acceleration (in m/s2 in the direction the heavy team is pulling) of the two teams
Answers
Answer:
[tex]a=0.13m/s^2[/tex]
Explanation:
From the question we are told that
Mass of first team man [tex]m_1=64kg[/tex]
Force of man first team man [tex]F_1=1350[/tex]
Mass of second team man [tex]m_2=69kg[/tex]
Force of man second team man [tex]F_2=1367N[/tex]
Generally the equation for net force F_n is mathematically given by
[tex]F_n=9(m_1+m_2)a[/tex]
[tex]9(m_1+m_2)a=9(f_2-f_1)[/tex]
[tex]9(64+69)a=9(1367-1350)[/tex]
[tex]a=\frac{9(1367-1350)}{9(64+69)}[/tex]
[tex]a=0.127819m/s^2[/tex]
Therefore the acceleration is given by
[tex]a=0.13m/s^2[/tex]
Select True or False for the following statements about electromagnetic waves. A vertical automobile antenna is sensitive to electric fields polarized horizontally. Ultraviolet radiation causes common sunburn. Radio waves travel in vacuum at a lower speed than the visible light. The sun's radiation is most intense in the visible region. Gamma rays can be produced in transitions of an atomic nucleus from one state to another. Radio waves have wavelengths longer than 1 m. X-rays travel in vacuum at a higher speed than the visible light.
Answers
Answer:
a) False, b) True, c) true, d) true, e) True, g) False
Explanation:
Se pide que analicemos cada expresión, f) true
a) False. La antena vertical tiene cargas eléctricas que se pueden mover en la direccion vertical, una onda electromagnética polarizada horizontal el campo eléctrico esta en la dirección horizontal por lo cual no puede mover los electrones que están en direccional vertical
be) True. La radiación ultravioleta es absorvidad por la melanina del la piel y crea las quemaduras comunes de insolación.
C) False. Todas la ondas electromagnetismo viajan en la misma velocidad c
d) True. La Temperatura del sol es 5800K por lo cual la radiación mas intensa esta en el rango visible
e) True. Los rayos gamma son de muy alta energía, por lo cual se producen en ransicio0n de los núcleos atmicos.
f) True. El rango de frecuencia para las onda de radio va desde 500 Kahoy hasta 110 MHz, por lo tanto el rango de longitudes de onda es
c= lam f
lam = c/f
lam = 3 108/500 103
lam = 6 102 m
lam = 3 108 / 110 106
lam = 2,72 m
los lo ttnato en todo el rango de las frecuecias de radio la lambda> 1 m
g) False. Todas las ondas electromagnéticas viajan a la misma velocidad c( 3 108m/s)