The individual is most likely sifting through the debris which is found at the crime scene.
What is Debris?This is defined as the scattered remains of something which has been broken down as a result of incidents such as an explosion.
The wire mesh is used as it helps to remove long fibers present at the crime scene which is taken for investigation.
Read more about Crime scene here https://brainly.com/question/10702774
Work out the specific heat capacity of each metal from the data given:
Gold- the temperature of 2.00g of gold is raised by 11.7°C when 3.00J of energy is supplied
Answer:
C) Solar Energy, i,e, Energy that comes from the sun
In one to two sentences, describe characteristics of a high-pressure system.
i give brainlist
pls answer in your own words
Answer:
A high pressure area is an area where the air sinks. As it does, it warms up by the adiabatic effect of a greater pressure and that causes the clouds to evaporate, giving place to a clear sky
Explanation:
A high-stress area, high, or anticyclone, is a location in which the atmospheric stress on the surface of the planet is more than its surrounding environment.
What are the traits of the high-pressure system?In a high-Pressure system, it has better pressure in its center than in the regions around it. Winds blow away from excessive pressure.
Swirling withinside the contrary route from a low-stress system, the winds of an excessive pressure system rotates clockwise north of the equator and counterclockwise south of the equator.
Hence, these are the characteristics of high-pressure system.
Learn more about high-pressure system here:
https://brainly.com/question/22343575
#SPJ2
The main purpose of the endocrine system is to produce:
A.
white blood cells.
B.
hemoglobin.
C.
neurons.
D.
hormones.
Answer:
hormones or D
Explanation:
:-)
Answer:
D. Hormones
Explanation:
Endocrine glands release hormones into the bloodstream. This lets the hormones travel to cells in other parts of the body.
what challenges arise when nuclear material is removed from a power plant?
Answer:
it destroy the surrounding area
chemistry question
label them
reactants, products,activation energy etc
In the illustration A would be the reactants and E would be the products. B would be the activation energy (Ea), C would be the potential energy of reactants, F would be the potential energy of products, and D would be the potential energy change.
Energy DiagramThe energy diagram shows the energy states of the components of reactions.
From the diagram, A being the reactant becomes E, the product. The minimum energy that A needs to overcome to arrive at the product (activation energy) is B.
The energy state of the reactant A before becoming the product is C while that of the product E is F. The difference in the energy state of A and E is D.
More on energy diagrams of reactions can be found here: https://brainly.com/question/12798587
Write down the structural formula for the monomer from which
polyvinyl chloride is derived.
(2)
Give the name of the monomer.
Answer:
Vinyl chloride is an organochloride with the formula H2C=CHCl that is also called vinyl chloride monomer (VCM) or chloroethene. This colorless compound is an important industrial chemical chiefly used to produce the polymer polyvinyl chloride (PVC).
Explanation:
Answer:
CH2=CHCl
Explanation:
Which type of bond forms when two or more atoms share electrons?.
Answer:
Covalent
Explanation:
Covalent is the sharing of electrons and Ionic is transferring of electrons.
Answer:
Covalent bonds
Explanation:
the interatomic linkage that results from the sharing of an electron pair between two atoms
In a redox reaction, which ion would you expect to be more easily reduced?.
How many moles of potassium sulfate would you need to prepare 1200 grams of 5.0% potassium sulfate (m/m) solution? Select one: a. 0.34 mols b. 60 mols c. 3.4 mols d. 174 mols
Answer:
The moles of potassium that you would need to prepare 1200 g of 5% potassium sulfate solution is 1.538 moles
What is another name for a Grasshopper?
Answer:
The scientific name of the grasshopper is Caelifera.
Explanation:
hope this helps.
Answer:
caelifera
Explanation:
that’s the scientific name >_<
Will give brainliest
sorry i know this:
4. 2 methyl 2 heptene
1. Define the unit 'mole'
Answer:
Below
Explanation:
The mole, symbol mol, is the SI base unit of amount of substance. The quantity amount of substance is a measure of how many elementary entities of a given substance are in an object or sample
How do I know the numerical subscript of an element? for example CuCl 2
Cu is copper (II), how do we know its roman number is 3
Answer:
"The Roman numeral denotes the charge and the oxidation state of the transition metal ion. For example, iron can form two common ions, Fe2+ and Fe3+. To distinguish the difference, Fe2+ would be named iron (II) and Fe3+ would be named iron (III)."
Explanation:
In chemistry, Roman numerals are used for a specific group of elements called transition metals. The Roman numerals indicate the charges that these metals carry in a compound.
What is the boiling point of water at standard atmospheric pressure?
Answer:
about 100 degrees Celsius
Explanation:
i dont cap
Which property describes a mixture? select three options. it can be separated by physical methods. it has a single chemical composition. it can appear different from different sources. it cannot be described by a chemical symbol or formula. it cannot have more than one state of matter.
The property of mixture which describes a mixture are it can be separated by physical methods, it can appear different from different sources and it cannot be described by a chemical symbol or formula.
What are mixtures?Mixtures are the compounds which are formed by the addition or combination of one or two elements or compounds.
As in the mixtures many states of matters are present and it will be filtered by using various physical methods, and it is not chemically shown by single chemical symbol or formula. Mixtures are also of two types:
Homogeneous mixtures are those in which equal compositions all over the volume is present.Heterogeneous mixtures are those in which different composition all over the volume is present.Hence options (1), (3) and (4) are correct.
To know more about mixtures, visit the below link:
https://brainly.com/question/24647756
A chemist dilutes a 1.0 ml sample of 2.0 m kno3 by adding water to it. if the concentration of the solution that is obtained is 0.0080 m, what is its volume? use m subscript i v subscript i equals m subscript f v subscript f.. 125 ml 250 ml 500 ml 2,000 ml
A chemist dilutes a 1.0 ml sample of 2.0M KNO₃ by adding water to it. If the concentration of the solution that is obtained is 0.0080 m, then its volume is 250mL.
How do we calculate volume?Volume for the given equation will be calculated by using the below equation as:
M₁V₁ = M₂V₂, where
M₁ = molarity of KNO₃ = 2M
V₁ = volume of KNO₃ = 1mL
M₂ = molarity of final solution = 0.0080M
V₂ = volume of final solution = ?
On putting these values on the above equation, we get
V₂ = (2)(1) / (0.0080) = 250mL
Hence option (2) is correct.
To know more about molarity, visit the below link:
https://brainly.com/question/24305514
Answer:
B. 250 mL
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
Magnesium + ... → Magnesium chloride + ....
Mg + HCl → MgCl_2 + H_2
(─.─||）
Answer:
Magnesium + hydrochloric acid → Magnesium chloride + hydrogen gas
Explanation:
acid + reactive metal (magnesium) → salt + hydrogen gas
The second-order rate constant for the decomposition of NO2 (to NO and O2) at 573 K is 0.54 M-1 s-1. Calculate the time for an initial NO2 concentration of 0.20 mol/L to decrease to a) one-half; b) one-sixteenth; c) one-ninth of its initial concentration.
The rate of second order reaction depends on the change in the concentration of the reactants.
Second order reaction:A second order reaction is one in which the rate of reaction depends on the concentration of reactants.
For a second order reaction;
1/[A] = kt + 1/[A]o
When concentration deceresases to one-half;
1/0.1 = 0.54t + 1/0.20
1/0.1 - 1/0.20 = 0.54t
10 - 5/0.54 = t
t = 9.3 s
When concentration deceresases to one-sixteenth;
1/0.0125 = 0.54t + 1/0.20
1/0.0125 - 1/0.20 = 0.54t
80 - 5 = 0.54t
t = 80 - 5/0.54
t = 149 s
When concentration deceresases to one-ninth;
1/0.022 = 0.54t + 1/0.20
1/0.022 - 1/0.20 = 0.54t
45 - 5 = 0.54t
t = 45 - 5/0.54
t = 74 s
Learn more about second order reaction: https://brainly.com/question/12446045
How do you figure out the number of protons in an atom?
How do you figure out the number of protons in an atom?
Answer:
Atomic number shows u the amount of protons there are in the atom
The protons are equal to the number of electrons
The group number tells you the number of electrons on the outer shell
(Sorry if u didn’t want the extra info but really it’s simple like magnesium has 12 so it has 12 protons/ 12 electrons)
Answer:
To calculate the numbers of subatomic particles in an atom, use its atomic number and mass number:
1. number of protons = atomic number.
2. number of electrons = atomic number.
3.number of neutrons = mass number - atomic number.
Explain why the available amount of water per person differs between countries
Answer:
because in the different countries it is distributed unevenly.
Explanation:
hope this helps
Translate the world equation in skeleton equation and balance them
(I) Hydrogen+chlorine= Hydrochloric acid
(II) potassium+chloride= potassium chloride+oxygen
Answer:
The balanced equation is: H2 (g) +Cl2 (g) →2HCl (g)
Explanation:
Balancing chemical equation refers to balancing the stoichiometric coefficients on the reactants and products side. This must be done as the chemical equation obeys the law of conservation of mass and momentum.
The representation of a chemical reaction in the form of substances is known as a chemical equation. The equation in which the number of atoms of all the molecules is equal on both sides of the equation is known as a balanced chemical equation. The Law of conservation of mass governs the balancing of a chemical equation.
Given chemical equation
The balanced chemical equation for the hydrogen + chlorine -> Hydrogen Chloride.
H2 + Cl2 → 2HCl
The equation is balanced as on the reactants side there are two hydrogens present and the same on the products side. For chlorine as well the same thing goes two chlorine atoms on the reactants side and two on the products side.
PLEASE HELP!!!! WILL MARK BRAINLIEST! A balloon is filled with 257.88 L of gas at STP. When the balloon is cooled to -20.5°C, and the pressure decreased to .40 atm, what will the volume of the balloon be?
Answer:
3.97 psi
Explanation:
The new pressure can be found by using the formula for Boyle's law which is
P1 V1 = P2 V2
explain how stalacitites and stalagmites are formed
As the redeposited minerals build up after countless water drops, a stalactite is formed. If the water that drops to the floor of the cave still has some dissolved calcite in it, it can deposit more dissolved calcite there, forming a stalagmite. Speleothems form at varying rates as calcite crystals build up. They are formed from condensation inside a cave, dripping off the ceiling.
PLEASE MARK ME BRAINLIEST
A pure sample of a monoprotic acid is dissolved in water. the sample is titrated with sodium hydroxide solution. at the point where 20.0 ml of the naoh solution has been added, the ph is 4.15. the phenolphthalein endpoint of the titration is observed when 50.0 ml of naoh have been added. what is the pka of the acid
Answer:
21 22 23 24 25 26 27 28 29 30
Explanation:
What is the pressure in a 8.00 L tank with 50.5 grams of chlorine gas at 365 K?
The pressure in the 8.00 L tank with 50.5 grams of chlorine gas at 365 K is 2.66 atm.
What is pressure?Pressure can be defined as the force acting prpendicular per unit surface.
To calculate the pressure of chlorine gas, we use the formula below.
Formula:
PV = nRT.................. Equation 1Where:
P = PressureV = Volumen = number of moles of chlorine gasR = Molar gas constantT = TemperatureMake P the subject of the equation
P = nRT/V............ Equation 1From the question,
Given:
T = 365 KR = 0.0821 L.atm.K⁻¹.mol⁻¹V = 8 Ln = 50.5/(35.5×2) = 0.711 molesSubstitute these values into equation 2
P = (0.0821×365×0.711)/8P = 2.66 atmHence, The pressure in the 8.00 L tank with 50.5 grams of chlorine gas at 365 K is 2.66 atm.
Learn more about pressure here: https://brainly.com/question/25736513
Check all reasons why a book was used.
it increased pressure on the gas.
it supported additional weights.
it balanced the syringe.
We can confirm that for the experiments regarding Boyle's law, the book was used to increase pressure on the gas and add additional weight.
Why is the book used in these experiments?The book is used for the reasons described in options 1 and 2 of the question. The book supports additional weights on the container, meaning that through these added weights we can increase the pressure being applied to the gas and see how said pressure affects the volume of a gas.
Therefore, we can confirm that the book was used to increase pressure on the gas and add additional weight.
To learn more about Boyle's law visit:
https://brainly.com/question/1437490?referrer=searchResults
Answer: A, B
Explanation: edge2023
Select the correct answer from the drop-down menu. a scientist digs up sample of arctic ice that is 458,000 years old. he takes it to his lab and finds that it contains 1.675 grams of krypton-81. if the half-life of krypton-81 is 229,000 years, how much krypton-81 was present when the ice first formed? use the formula n = n0 . the ice originally contained grams of krypton 81.
The original mass of krypton 81 that is present in the ice is 6.70 grams.
How do we calculate original mass?Original mass of any substance will be calculated as below for the decomposition reaction is:
N = N₀(1/2)ⁿ, where
N = remaining mass of krypton-81 = 1.675g
N₀ = original mass of krypton-81 = ?
n will be calculated as:
n = T/t, where
T = total time period = 458,000 years
t = half life time = 229,000 years
n = 458,000/229,000 = 2
Now putting all these values on the above equation, we get
N₀ = 1.675 / (1/2)²
N₀ = 6.70 g
Hence required mass is 6.70 g.
To know more about half life time, visit the below link:
https://brainly.com/question/2320811
NO LINKS PLEASE! Why does dye dropped into a cup of water eventually spread throughout the water?
A. The water has lattice vectors.
B. The water undergoes a phase transition.
C. The water particles and dye particles exhibit Brownian motion.
D. The water exerts pressure on the container.
Answer:
C
Explanation:
okay, you need to look at the structures of the particles of matter in the solid, liquid and gas.
particles in a solid are in fixed positions, where they can only vibrate in those positions ( take a look at ice, or rather, a brick)liquids have very small or rather, no spaces between them, but they can slide or rub against each other, like people in a really tight crowd I guessgas particles have very large spaces between them and they move randomly. these exibit what's called brownian motion.since water particles (and all other liquid particles) have negligible spacings and limited movement, that allows the dye particles to move from a region of high concentration to that of a low concentration. the aim for this is for the mixture/solution to reach an equilibrium, that is the mixture must get to a point where all regions have the same concentration of the dye.you can refer to your coursebooks :)
correct where wrong please:)
At what minimal temperature is the following reaction, the reduction of magnetite by graphite to elemental iron, spontaneous?
Fe3O4(s)+2C(s,graphite)→2CO2(g)+3Fe(s)
The values of enthalpy change, entropy change and temperature all determine the spontenity of a reaction.
What is a sponteanous reaction?A sponteanous reaction is one which has the change in free energy as negative. We know that ΔG = ΔH - TΔS. The spontenity of a reaction depends on;
i. enthalpy change
ii. entropy change
iii. temperature
Since the values in the qestion are not given, the question is incomplete and we can not obtain a numerical value in order to decide the sponteanity of the reaction.
Learn more about sponteanous reaction: https://brainly.com/question/13790391?
The chemical formula for water is what does the formula show about each element in the compound?.
This states that
1 molecule of water contains
2 hydrogens(H)1 Oxygen(O)And if we write the chemical reaction
2H_2+O_2—›2H_2O