The ocean basins are generally underlain by basalt because the basaltic crust is denser than the continental crust and thus sinks lower into the mantle.
Basalt is also formed at mid-ocean ridges, where new oceanic crust is created through volcanic activity. This process, known as seafloor spreading, continuously adds new basaltic crust to the ocean basins.
In contrast, the core areas of the continents are generally composed of granite because granite is less dense than basalt and therefore rises higher in the mantle. Granite is formed through the process of continental crustal growth, which involves the melting and reworking of pre-existing crustal rocks. This process is driven by a variety of tectonic processes, including subduction, collision, and extension.
Overall, the distribution of basalt and granite is controlled by differences in density and the tectonic processes that create and modify the Earth's crust. The relationship between the two rock types and metamorphic grade is that as metamorphic grade increases, rocks become more and more dense due to processes like compaction and recrystallization. This can cause some basaltic rocks to transform into denser gabbroic rocks, while granitic rocks may become denser and more crystalline.
Learn more about granite here:https://brainly.com/question/30717890
#SPJ11
what is the basic tenets offracture mechanics.
The basic tenets of fracture mechanics can be summarized as follows: Fracture toughness, Stress concentration, Crack propagation, Fracture modes and Failure criteria
Fracture mechanics is a branch of engineering that studies the behaviour and failure of materials under stress, particularly when cracks and other flaws are present.
Fracture toughness: This is a measure of a material's capacity to withstand crack propagation.Stress concentration happens when the stress levels are greater near the tip of a fracture or other defect. Crack propagation: A crack propagates when it expands as a result of applied stress. Fracture modes: Depending on the type and orientation of the crack, fracture can occur in a variety of modes. Failure criteria are used to forecast when a material will fail owing to the existence of cracks or other flaws.For such more question on fracture:
https://brainly.com/question/1619513
#SPJ11
page(s) 326-351 10.3. what were the first hominins? what was the evolutionary fate of the first hominins? this map shows the locations of several later australopithecine species, with some of the labels blanked out. drag the name of each species to the appropriate blank to indicate where in africa its fossil remains have been found.
The first hominins were early bipedal primates that evolved in Africa around 6-7 million years ago. They are believed to have descended from an arboreal ancestor and adapted to walking on two legs in order to move more efficiently in the savannah environment.
The earliest known hominin is Sahelanthropus tchadensis, followed by Orrorin tugenensis and Ardipithecus ramidus. The evolutionary fate of the first hominins is a subject of debate among scientists.
Several later australopithecine species have been found in different parts of Africa, including.
Australopithecus afarensis: Found in Ethiopia and Tanzania, including the famous "Lucy" fossil.Australopithecus africanus: Found in South Africa.Australopithecus garhi: Found in Ethiopia.Australopithecus sediba: Found in South Africa.Paranthropus aethiopicus: Found in Ethiopia and Kenya.Paranthropus boisei: Found in Tanzania and Kenya.Paranthropus robustus: Found in South Africa.Learn more about “ first hominins “ visit here;
https://brainly.com/question/13959334
#SPJ4
1.) Wegener's original name for the supercontinent was _______.
2.) When two tectonic plates converge and one slips under the other, a _______ zone is formed.
3.) The movement of a tectonic plate away from a mid-ocean ridge can be measured by the orientation of the _______ field.
4.) The process of heating the mantle from the core of the earth causes expansion and movement of material in a _______ cell, which is partly responsible for the movement of continents.
5.) Gravity is also responsible for the movement of continents in two ways: through _______ at subduction zones as gravity drags a plate downward, and through _______ as gravity pushes plates downslope, away from the center.
1.) Wegener's original name for the supercontinent was Pangaea.
2.) When two tectonic plates converge and one slips under the other, a subduction zone is formed.
3.) The movement of a tectonic plate away from a mid-ocean ridge can be measured by the orientation of the magnetic field.
4.) The process of heating the mantle from the core of the earth causes expansion and movement of material in a convection cell, which is partly responsible for the movement of continents.
5.) Gravity is also responsible for the movement of continents in two ways: through slab pull at subduction zones as gravity drags a plate downward, and through ridge push as gravity pushes plates downslope, away from the center.
To know more about Pangaea refer here:
https://brainly.com/question/11694556
#SPJ11
the incoming energy transmitted from the sun to earth is called _______ . multiple choice question. sol luminosity insolation helios
The incoming energy transmitted from the sun to Earth is called insolation. Insolation refers to the amount of solar radiation that reaches the Earth's surface at a given location and time.
It is determined by the angle of the Sun's rays, the duration of daylight, and the amount of atmospheric absorption and scattering. Insolation is important for understanding weather and climate patterns, as it influences the amount of energy available to heat the atmosphere, oceans, and land. It also plays a significant role in the Earth's water cycle, as it drives evaporation and precipitation. Insolation varies based on factors such as latitude, season, and weather conditions, and is typically measured in units of watts per square meter (W/m²).
To learn more about insolation visit;
brainly.com/question/14505845
#SPJ11
In thrust faulting:
a. Grabens develop on the footwall block
b. The crust is shortened and the fault plane is inclined at an angle less than 45 degrees
c. The crust is stretched and the fault plane is inclined at an angle greater than 45 degrees
d. The hanging wall block slips downward relative to the footwall block
In thrust faulting, the crust is shortened and the fault plane is inclined at an angle less than 45 degrees.
This occurs when compressional forces cause the hanging wall block to move up and over the footwall block, leading to a horizontal shortening of the crust. Grabens do not develop on the footwall block in thrust faulting, as they are characteristic of normal faults where the crust is being stretched.
In thrust faulting, the hanging wall block does not slip downward relative to the footwall block; instead, it moves upward and over the footwall block due to the compressional forces acting on the crust.
To know more about thrust faulting refer here:
https://brainly.com/question/29590844
#SPJ11
What does Stefan-Boltzmann's Law tell us?
Stefan-Boltzmann Law is a fundamental principle in physics that relates the total radiant energy (power) emitted by a blackbody to its temperature. A blackbody is an idealized object that absorbs all incoming radiation and emits radiation solely based on its temperature.
The law states that the power emitted by a blackbody is proportional to the fourth power of its temperature, measured in Kelvin. Mathematically, this relationship is expressed as:
P = σ * A * [tex]T^{4}[/tex]
Where:
- P represents the emitted power,
- σ is the Stefan-Boltzmann constant (approximately [tex]5.67*10^{-8} W m^{-2} K^{-4}[/tex]),
- A is the surface area of the object, and
- T is the temperature of the object in Kelvin.
The Stefan-Boltzmann Law is crucial in understanding the heat transfer between objects and their surroundings. It helps scientists and engineers analyze and predict the behavior of various systems, including the Earth's energy balance and the radiation emitted by stars. The law has practical applications in designing radiators, cooling systems, and thermal sensors.
In summary, the Stefan-Boltzmann Law describes the relationship between the radiant energy emitted by a blackbody and its temperature, stating that the emitted power is proportional to the fourth power of the temperature. This principle has significant implications in various fields, such as astrophysics, engineering, and environmental science.
Know more about Stefan-Boltzmann Law here:
https://brainly.com/question/30763196
#SPJ11
How did Russia make the Chernobyl plant safer?
OIt opened the plant for tours.
It built a new reactor.
OIt combined two reactors.
OIt built a new confinement structure.
Answer:
it cleaned up
Explanation:
good
What is the best hypothesis on how does earth look beneath us
It's difficult to form a hypothesis on the exact appearance of Earth's interior as we can't directly observe it. However, scientists have been able to study seismic waves and make educated guesses about the composition and structure of Earth's interior. It is believed that the Earth is made up of three main layers: the crust, mantle, and core. The crust is the outermost layer and is made up of solid rock. The mantle is the thickest layer and is mostly made up of solid rock but with some areas of molten rock. The core is divided into two parts, the outer core which is liquid and the inner core which is solid. It is believed that the inner core is made up of solid iron and nickel, while the outer core is made up of liquid iron and nickel. These hypotheses are supported by various indirect evidence such as seismic data, magnetic fields, and the behavior of earthquakes.
in a map chart, each region displays shading to indicate the values in the data series. question 8 options: true false
true.in a map chart, each region displays shading to indicate the values in the data series.
A map chart is a type of visualization tool that displays data geographically on a map. The data is typically represented using shading, color-coding, or symbols to indicate the values in the data series. Map charts are commonly used to show patterns or variations in data across different regions or locations. They are useful for visualizing data related to population density, climate, topography, natural resources, economic activity, and many other geographically-dependent variables.
Learn more about visualization here:https://brainly.com/question/29430258
#SPJ11
What does is mean when a Doppler Radar detects a phase shift of 180° in a target?
Answer:
With the "Doppler shift", the sound pitch of an object moving toward your location is higher due to compression (a change in the phase) of sound waves. As an object moves away from your location, sound waves are stretched resulting in a lower frequency.
Hope this helps :)
Pls brainliest...
When a Doppler Radar detects a phase shift of 180° in a target, it means that the target is moving directly towards or away from the radar.
The Doppler effect causes a change in frequency of the radar waves that bounce off the target, and this phase shift indicates that the target is moving at a speed that is equal to the speed of the radar waves.
This information is important for tracking the movement of the target and can be used in applications such as weather forecasting and air traffic control.When a Doppler Radar detects a phase shift of 180° in a target, it means that the radar waves reflected from the target have changed their phase by 180° compared to the original transmitted waves. In the context of Doppler Radar, this phase shift is associated with the relative motion between the radar and the target.
Doppler Radar works by emitting radio waves and analyzing the reflected waves from a target. The phase shift occurs due to the Doppler effect, which causes a change in frequency (and wavelength) of the waves depending on the relative motion between the source (radar) and the target. A 180° phase shift indicates that the target is either moving directly towards or away from the radar at a certain velocity.In summary, a 180° phase shift detected by a Doppler Radar in a target indicates a relative motion between the radar and the target, with the target moving either towards or away from the radar.
Learn more about Doppler Radar here
https://brainly.com/question/31041277
#SPJ11
the energy in crude oil derives from what original source?
The energy in crude oil derives from ancient organic matter, such as dead plants and animals that were buried under layers of sediment in the Earth's crust millions of years ago.
Over time, the heat and pressure from the Earth's crust caused these organic materials to undergo a process called diagenesis, where they were transformed into hydrocarbons, which are the main components of crude oil.
Hydrocarbons are molecules made up of carbon and hydrogen atoms, which contain a large amount of stored energy due to the strong bonds between these atoms. This energy is released when the hydrocarbons are burned as fuel.
Therefore, the energy in crude oil ultimately comes from the sun, which provided the energy for photosynthesis to occur in the ancient plants that formed the organic matter that eventually became crude oil.
To know more about crude oil refer here:
https://brainly.com/question/8117126
#SPJ11
During a year, which of the 3 latitudes experiences the least variation in average daily insolation at the top of the atmosphere?
The latitude that experiences the least variation in average daily insolation at the top of the atmosphere during a year is the equator. This is because the equator receives direct and nearly constant sunlight throughout the year due to its location at the center of the Earth's rotation.
The atmosphere also has a minimal impact on the amount of insolation reaching the equator, resulting in a relatively stable amount of solar radiation received throughout the year. In contrast, latitudes further away from the equator experience greater variation in insolation due to changes in the angle of the sun and the atmosphere's ability to scatter and absorb solar radiation.During a year, the latitude that experiences the least variation in average daily insolation at the top of the atmosphere is the equator (0° latitude). This is because the equator receives relatively consistent sunlight throughout the year due to the Earth's tilt and its position relative to the sun. In contrast, higher latitudes (polar and mid-latitude regions) experience greater variation in insolation due to the changing angle of sunlight throughout the year.
learn more about latitude here
https://brainly.com/question/932035
#SPJ11
write down a set of processes that could transform a metamorphic rock into a sedimentary rock, then into an igneous rock and back into a sedimentary rock.
The processes that could transform a metamorphic rock into a sedimentary rock, then into an igneous rock, and back into a sedimentary rock are weathering and erosion, transportation and deposition, lithification, melting and solidification, and repeat.
What is the Process of Transformation of the Rocks?
The first step in transforming a metamorphic rock into a sedimentary rock would be weathering and erosion, which breaks down the existing rock into smaller sedimentary particles. These sediments would then be transported by water, wind, or ice and deposited in a new location, forming a sedimentary rock.
To transform the sedimentary rock into an igneous rock, the next step would be lithification, which involves the compaction and cementation of the sedimentary particles. This can create a sedimentary rock such as sandstone or shale.
The transformation from sedimentary to igneous rock would involve melting and solidification, which occurs when magma from the Earth's mantle rises up and cools, forming an igneous rock. This could occur due to tectonic activity, such as a volcanic eruption.
Finally, to transform the igneous rock back into a sedimentary rock, the cycle would begin again with weathering and erosion, followed by transportation and deposition, and then lithification. This could create a new sedimentary rock with a different composition or texture than the original metamorphic rock.
In summary, the processes that could transform a metamorphic rock into a sedimentary rock, then into an igneous rock, and back into a sedimentary rock are weathering and erosion, transportation and deposition, lithification, melting and solidification, and repeat.
To know more about transformation in the rock cycle.
visit:
https://brainly.com/question/19930528
#SPJ11
venus' atmospheric clouds are so thick that the surface of the planet is rarely seen when observing it in visible light
true or false
Answer:
true
Explanation:
you need technology to see through venus' clouds
True, Venus' atmospheric clouds are indeed so thick that the surface of the planet is rarely seen when observing it in visible light.
Venus is known for its thick, opaque atmosphere composed mostly of carbon dioxide with clouds of sulfuric acid. These clouds are so thick that they effectively block visible light, making it difficult to observe the planet's surface.
In fact, it wasn't until the 1990s that radar imaging was able to penetrate the clouds and provide a more detailed picture of the planet's surface.
The thick atmosphere also creates a strong greenhouse effect, trapping heat and causing surface temperatures to soar to over 460 degrees Celsius, hotter than the surface of Mercury, the closest planet to the Sun.
The extreme temperatures, pressure, and toxic atmosphere make Venus a harsh environment for life as we know it.
Learn more about Venus at: https://brainly.com/question/28479993
#SPJ11
If you see a/an _______________________________, this usually means that there is outflow from a thunderstorm.
If you see a shelf cloud or gust front, this usually means that there is outflow from a thunderstorm.
A shelf cloud is a low, horizontal, wedge-shaped formation often found at the leading edge of a thunderstorm, while a gust front is the boundary separating the cool, dense outflow of air from the thunderstorm and the warmer, more humid surrounding air. These features indicate the presence of strong outflow winds caused by the downdrafts within the storm.
When a thunderstorm develops, updrafts carry warm, moist air upwards, and downdrafts bring cooler, drier air back down to the surface. This process leads to the formation of precipitation, which can cause the downdrafts to intensify as the falling rain drags the surrounding air down with it. This phenomenon, known as evaporative cooling, increases the density of the downdraft and accelerates its descent.
As the downdraft reaches the ground, it spreads out horizontally, creating strong outflow winds that can cause damage and pose a threat to safety. These outflow winds are responsible for the formation of shelf clouds and gust fronts, which are visible signs of the storm's outflow. Observing these features can help meteorologists and the general public identify areas where strong winds and potential severe weather may occur, allowing them to take necessary precautions to ensure safety.
Know more about Thunderstorm here:
https://brainly.com/question/1779066
#SPJ11
the most likely cause of a truly devastating tsunami with a wave run-up of 20 feet or more in southern california would result from
The most likely cause of a truly devastating tsunami with a wave run-up of 20 feet or more in Southern California would result from a large earthquake occurring along the Cascadia Subduction Zone.
located off the coast of the Pacific Northwest, from Northern California to British Columbia. This subduction zone is capable of producing a magnitude 9.0 or larger earthquake, which can generate a massive tsunami that could impact the entire west coast of North America. Another potential source of a tsunami in Southern California is a large earthquake occurring in the Aleutian Islands or Japan, which could send waves across the Pacific Ocean.There are several potential sources of a devastating tsunami with a wave run-up of 20 feet or more in Southern California. One possible cause is a large earthquake along the Cascadia Subduction Zone, which could generate a tsunami that would travel down the coast to Southern California. Another potential source is a submarine landslide or volcanic eruption in the Pacific Ocean, which could also generate a tsunami.
Learn more about tsunami here:https://brainly.com/question/14782736
#SPJ11
The south ocean, wich surrounds Antarctica, flows into how many other oceans?
The Atlantic Ocean, the Indian Ocean, and the Pacific Ocean are all impacted by the Southern Ocean.
The Southern Ocean, commonly referred to as the Antarctic Ocean, is the fifth and southernmost ocean in the globe and encircles Antarctica. Through numerous channels and currents, which transport water and nutrients throughout the various ocean basins, the Southern Ocean's waters are linked to other seas.
The nation's coastline stretches for around 1,739 kilometers along both the Atlantic and Indian Oceans. The nation is bordered to the south by both oceans.
Learn more about The Southern Ocean here:
https://brainly.com/question/11803543
#SPJ1
Explain and sketch how magma forms during continental collisions.
As the plates collide, the pressure and temperature increase, causing the rocks to deform and melt. This results in the formation of magma, which rises to the surface and may erupt as a volcano.
The melting of rocks is caused by a combination of factors including frictional heating, radiogenic heating, and decompression melting. Frictional heating occurs as the two plates grind against each other, causing heat to build up in the rocks.
Radiogenic heating results from the decay of radioactive elements in the rocks, and decompression melting occurs as the rocks are uplifted and the pressure decreases, causing the melting point to decrease as well. The magma that forms during continental collisions is typical of felsic composition, meaning it is rich in silica and has a high viscosity.
This is because the rocks that melt during continental collisions are usually granitic or sedimentary in nature, which have a high silica content. To sketch how magma forms during continental collisions, we can start with two converging continental plates.
As the plates collide, the rocks in the subduction zone begin to deform and melt due to the increase in pressure and temperature. This results in the formation of magma chambers, which can be visualized as large pockets of molten rock beneath the Earth's surface.
The magma rises towards the surface and may erupt as a volcano or solidify to form plutonic rocks such as granite. In summary, the formation of magma during continental collisions is a complex process involving the melting of rocks due to a combination of frictional heating, radiogenic heating, and decompression melting. The resulting magma is typical of a felsic composition and can lead to the formation of volcanic or plutonic rocks.
Learn more about magma:
brainly.com/question/16940653
#SPJ11
is the vertical distance between mean sea level and a point or object on, above, or below earth's surface.
The vertical distance between the mean sea level and a point or object on, above, or below Earth's surface is known as elevation or altitude.
The height above or below a specified reference point, most frequently a reference geoid, which is a mathematical representation of the Earth's sea level as an equipotential gravitational surface, determines a location's elevation. Elevations are often made from the building's four principal faces: the front, back, right, and left. In accordance with the overall direction the structure faces, these views are often referred to as north, south, east, and west.
This measurement indicates the height of a point or object relative to the mean sea level and can be positive for points above or negative for points below Earth's surface.
To learn more about Altitude, click here:
https://brainly.com/question/4390102
#SPJ11
why didn't the pacific plate just subduct under the north american plate right behind the farallon plate
The subduction of the Farallon Plate beneath the North American Plate was a complex process that involved various factors, including the shape and size of the plates, their relative velocities, and the presence of other tectonic features in the region. While it might seem intuitive that the Pacific Plate could have simply continued to subduct beneath the North American Plate after the Farallon Plate disappeared, there were several reasons why this did not happen.
Firstly, it's important to understand that the subduction of a plate is not a simple, linear process. Instead, it involves the interaction of multiple tectonic forces that can create complex and unpredictable outcomes. In the case of the Farallon Plate, its subduction beneath the North American Plate was facilitated by a process known as slab pull, which occurs when the dense oceanic lithosphere of a subducting plate sinks into the mantle, creating a downward force that helps to pull the rest of the plate along with it. This process was aided by the fact that the Farallon Plate was relatively small and narrow, making it easier for it to be consumed by the subduction zone.
However, as the Farallon Plate continued to subduct, its influence on the tectonic forces in the region began to change. The subduction of the plate caused a significant amount of melting in the mantle beneath it, which led to the formation of a large magma chamber known as the Great Valley Igneous Province. This in turn caused the overlying North American Plate to deform and bend, creating a broad uplifted region that is now known as the Sierra Nevada Mountains.
To know more about Farallon Plate visit:
https://brainly.com/question/29730242
#SPJ11
why is mars red? group of answer choices the red color of mars is a result of the scattering of light in the martian sky. martian volcanoes released a much redder lava than volcanoes on earth. chemical reactions between surface rock and atmospheric oxygen literally rusted the surface. the red color is caused by water ice chemically bound in surface rock.
The red color of Mars is caused by a combination of factors, but the most significant reason is the chemical reactions between surface rock and atmospheric oxygen. This process, known as oxidation, literally rusts the surface of Mars, resulting in the distinctive red hue we see today.
In addition, the scattering of light in the Martian sky also contributes to the reddish appearance of the planet. While Martian volcanoes did release a much redder lava than those on Earth, they are not the primary cause of the planet's red color. Water ice chemically bound in surface rock is also a factor, but it is not the dominant cause of Mars' redness.
Overall, the chemical reactions between surface rock and atmospheric oxygen are the most significant reason why Mars is red. These reactions have occurred over millions of years and have resulted in the striking appearance of the planet that we observe today.
Learn more about Mars here:
https://brainly.com/question/13480622
#SPJ11
Describe what happens when subduction-derived magma encounters overlying crust.
When subduction-derived magma encounters overlying crust, a number of different processes can occur. The specific outcome will depend on a variety of factors, including the composition of the magma, the temperature and pressure of the surrounding environment, and the properties of the overlying crust.
In general, subduction-derived magma is formed when one tectonic plate is forced beneath another, carrying with it a mix of melted rock and other materials. As this magma rises through the mantle, it can encounter the overlying crust and begin to interact with it in a variety of ways.
One possibility is that the magma will simply cool and solidify as it encounters the cooler temperatures of the crust. This can result in the formation of intrusive igneous rocks like granite or diorite, which are created when magma slowly cools and solidifies deep beneath the Earth's surface.
Alternatively, the magma may be hot and fluid enough to continue rising through the crust, pushing aside rocks and other materials as it goes. This can result in the formation of volcanic eruptions, as the magma reaches the Earth's surface and spews out as lava and ash.
In some cases, the subduction-derived magma may also react chemically with the overlying crust, leading to the formation of new minerals and other materials. For example, if the magma is rich in silica and encounters a layer of limestone, it may react to form a type of rock called skarn.
Overall, the interaction between subduction-derived magma and the overlying crust can be a complex and dynamic process, with a variety of outcomes depending on the specific conditions involved.
Learn more about subduction-derived magma:
brainly.com/question/4557803
#SPJ11
hurricanes lose strength when they hurricanes lose strength when they move over cooler water. move over warmer water. move over land. move over cooler water or move over land.
Answer:
Hurricanes lose strength when they move over cooler water or over land.
Hurricanes lose strength when they move over cooler water or move over land. This is because the cooler water and land reduce the warm, moist conditions that fuel hurricanes, leading to a decrease in their intensity.
A spiral arrangement of thunderstorms that produce torrential rain and squalls, a low-pressure center, and powerful winds are the characteristics of a tropical cyclone, a fast-revolving storm system. A tropical storm that has sustained winds of 74 mph or greater is referred regarded as a hurricane. A storm's eye typically measures 20 to 30 miles in width and can reach distances of 400 miles. Storms can be dangerous because of their torrential downpours, strong gusts, and storm surges.
More water vapor can be held in the air that is warmer. Particularly during extreme occurrences, the extra atmospheric moisture causes more intense rainfall. The towering thunderstorms that surround a hurricane are fueled by the swirling winds that pull moist air toward the center of the storm.
To learn more about Hurricanes, click here:
https://brainly.com/question/20950395
#SPJ11
which option correctly lists the cyclones from largest to smallest average size? view available hint(s)for part a which option correctly lists the cyclones from largest to smallest average size? hurricane, midlatitude cyclone, and tornado hurricane, tornado, and midlatitude cyclone midlatitude cyclone, hurricane, and tornado tornado, hurricane, and midlatitude cyclone midlatitude cyclone, tornado, and hurricane
The option that correctly lists the cyclones from largest to smallest average size is A):
Hurricane, midlatitude cyclone, and tornado.
This means that hurricanes, on average, are the largest cyclones, followed by midlatitude cyclones, and then tornadoes which are the smallest.
Cyclones are low-pressure weather systems that form over warm ocean waters and can cause severe weather conditions such as strong winds, heavy rainfall, and storm surges. They can vary in size from small tornadoes to large hurricanes and midlatitude cyclones.
Hurricanes are the largest cyclones, with an average diameter of 300-400 miles, while midlatitude cyclones are typically several hundred to a thousand miles wide. Tornadoes, on the other hand, are the smallest cyclones, with an average diameter of only a few hundred yards.
Therefore, the correct order of cyclones from largest to smallest average size is hurricane, midlatitude cyclone, and tornado(a).
For more questions like Hurricanes click the link below:
https://brainly.com/question/18950883
#SPJ11
Match each of the following climates with the areas of East Asia that those climates exist in.
humid continental climates
desert and steppe climates
highland climates
tropical climates
Humid continental climates can be found in areas of northeastern China, northern Japan, and parts of North Korea. These areas experience hot summers and cold winters with significant precipitation throughout the year.
Desert and steppe climates can be found in areas of Inner Mongolia, northern China, and western China. These areas experience hot summers and cold winters with low precipitation. Highland climates can be found in mountainous regions of East Asia such as the Himalayas, the Tibetan Plateau, and the Japanese Alps. These areas experience cool temperatures with high precipitation.
Tropical climates can be found in southern China, Taiwan, Hong Kong, Macau, and the southern islands of Japan. These areas experience hot and humid conditions with high levels of precipitation throughout the year. In summary, East Asia is home to a wide range of climates, each with unique characteristics and features. From the hot and humid tropical climates of southern China to the cold and snowy highland climates of the Tibetan Plateau, East Asia offers a diverse array of climates that are influenced by a variety of factors including latitude, altitude, and proximity to large bodies of water.
Learn more about climate here:
https://brainly.com/question/31075397?
#SPJ11
What information if provided in the Gus display
"Gus display shows gas chromatography data such as retention time, peaks, temperature, and pressure within the system."
Typically, a Gus display may display gas chromatography-related data, such as peak correlations and chemical retention times. In the chromatographic system, data on temperature, pressure, and flow rate may also be shown. Additionally, real-time data may be shown on a Gus display while the chromatographic analysis is being performed.
The chromatographic system may also be controlled by certain Gus displays, for example, by changing the parameters for pressure or temperature. In general, a Gus display offers crucial information and control options for gas chromatography analysis.
Learn more about chromatography:
https://brainly.com/question/28731153
#SPJ4
The correct question will be: "What's in a Gus display?"
what type of hazard tends to occur repeatedly in the same geographical location because it is related to weather patterns or physica
The type of hazard that tends to occur repeatedly in the same geographical location because it is related to weather patterns or physical features is known as a natural hazard.
Examples of natural hazards include hurricanes, tornadoes, floods, earthquakes, landslides, and wildfires. These hazards are often linked to the unique characteristics of a particular region, such as its topography, climate, and geography. Understanding the natural hazards of a specific area is important for disaster preparedness and response, as well as for land-use planning and infrastructure development.Some examples of natural hazards that tend to occur repeatedly in the same geographical location due to weather patterns or physical features include:
Floods: Areas near rivers, coasts, or low-lying regions are more prone to flooding due to heavy rainfall or storm surges.
Hurricanes/Typhoons/Cyclones: These intense storms form over warm ocean waters and are most common in tropical regions. Areas in the path of these storms are at risk of high winds, storm surges, and heavy rainfall.
Tornadoes: Tornadoes are most common in areas known as Tornado Alley in the central United States, where warm, moist air from the Gulf of Mexico meets cool, dry air from the north.
Earthquakes: Earthquakes occur along fault lines and are more common in areas where tectonic plates meet, such as the Pacific Ring of Fire.
Volcanic eruptions: Volcanoes are typically found near tectonic plate boundaries, and eruptions can cause ashfall, lava flows, and mudslides.
Learn more about Floods here:https://brainly.com/question/31459538
#SPJ11
in which area has there been successful international effort to address a global environmental concern?
One area where there has been successful international effort to address a global environmental concern is the reduction of ozone-depleting substances (ODS) under the Montreal Protocol. The Montreal Protocol is an international agreement that was signed in 1987 to address the depletion of the ozone layer in the Earth's atmosphere, which was caused by the use of chlorofluorocarbons (CFCs) and other ODS in industrial and consumer products.
Under the Montreal Protocol, countries agreed to phase out the production and consumption of ODS, and to transition to alternative substances that are less harmful to the ozone layer. The protocol has been widely successful, with the global production and consumption of ODS declining significantly since its adoption. As a result of these efforts, the ozone layer has begun to recover, and scientists predict that it will return to pre-1980 levels by the middle of the 21st century. The success of the Montreal Protocol is a testament to the effectiveness of international cooperation and environmental diplomacy in addressing global environmental challenges.
Learn more about Protocol here:
https://brainly.com/question/27581708
#SPJ11
when the glacier moves over irregular terrain, the zone of fracture is subjected to tension, resulting in cracks called?
Answer:
When a glacier moves over irregular terrain, the zone of fracture is subjected to tension, resulting in cracks called crevasses.
Explanation:
geography, new versus returning sessions, and timing are all examples of conversion funnel channel analysis segmentation none of the above
Geography, new versus returning sessions, and timing are all examples of segmentation in conversion funnel channel analysis. Segmentation helps in categorizing the data based on various factors such as location, user behavior, and time, which ultimately aids in understanding and optimizing the conversion funnel for better performance.
Out of the given options, the terms "geography", "new versus returning sessions", and "timing" are examples of segmentation in conversion funnel channel analysis. Segmentation refers to the process of dividing a larger group of data or audience into smaller, more specific groups based on certain characteristics or criteria. In this case, these three terms are being used to segment the data in order to gain a deeper understanding of how different factors may be affecting the conversion funnel. By analyzing these segments, businesses can gain valuable insights into how to optimize their conversion strategies and improve their overall performance.
Learn more about Geography here: brainly.com/question/1462956
#SPJ11