Answer:
Explanation:
When a lightning bolt travels from the cloud to the ground it actually opens up a little hole in the air, called a channel. Once then light is gone the air collapses back in and creates a sound wave that we hear as thunder. The reason we see lightning before we hear thunder is because light travels faster than sound!
Answer:
light travels faster than sound
Explanation:
A gas is held at atmospheric pressure, approximately 100kPa, and room temperature, 298K,
in a container closed with a piston. The piston is initially in a fixed position so the container has a volume of 2.0dm3.
The gas is heated to a temperature of 100∘C
What is the pressure in the container?
Answer:
125 KPa
Explanation:
Data obtained from the question include:
Initial pressure (P1) = 100 KPa
Initial temperature (T1) = 298 K
Final temperature (T2) = 100°C = 100°C + 273 = 373 K
Final pressure (P2) =..?
Since the volume of the container is fixed, the final pressure in the container can be obtained as follow:
P1/T1 = P2/T2
100/298 = P2/373
Cross multiply
298 x P2 = 100 x 373
Divide both side by 298
P2 = (100 x 373) / 298
P2 = 125.2 ≈ 125 KPa
Therefore, the final pressure in the container is approximately 125 KPa.
A drop
of
oil volume 10 m
Spreads out on water to make a
Circular fils of diameter 10
What is that thickness?
Answer:
[tex]27.5\ m[/tex]
Explanation:
As we know that volume of cylinder is
[tex]v=\pi r^{2} *h[/tex]
Where v=volume , h= height or thickness and r= radius
Here,
[tex]v= 10 m ,\ diameter= 10, \ r=\frac{diameter}{2} \ r=\frac{10}{2}\\ r=5[/tex]
Putting these values in the previous equation , we get
[tex]10\ = \frac{22}{7} *5 *5*h\\ 14\ =\ 110*h\\h=\frac{110}{14} \\h=\frac{55}{2} \\\\h=27.5\ m[/tex]
Therefore thickness is 27.5 m
A 28-turn circular coil of radius 4.40 cm and resistance 1.00 Ω is placed in a magnetic field directed perpendicular to the plane of the coil. The magnitude of the magnetic field varies in time according to the expression B = 0.010 0t + 0.040 0t2, where B is in teslas and t is in seconds. Calculate the induced emf in the coil at t = 4.20 s.
Answer:
ε = -0.0589V = -58.9mV
Explanation:
In order to calculate the induced emf in the coil, you use the following formula:
[tex]\epsilon=-N\frac{d\Phi_B}{dt}=-N\frac{d(SBcos\alpha)}{dt}[/tex] (1)
ε: induced emf = ?
N: turns of the coil = 28
ФB: magnetic flux trough the coil
S: cross sectional area of the circular coil = π.r^2
r: radius of the cross sectional area of the coil = 4.40cm = 0.044m
B: magnetic field
α: angle between the direction of the magnetic field and the direction of the normal to the cross area of the coil = 0°
You take into account that the area is constant respect to the magnetic field that cross it. Only the magnetic field is changing with time. The magnetic field depends on time as follow:
[tex]B(t)=0.010t+0.040t^2[/tex] (2)
You replace the expression (2) into the equation (1), evaluate the derivative, and replace the values of the other parameters for t =4.20s:
[tex]\epsilon=-NS\frac{dB}{dt}=-NS\frac{d}{dt}[0.010t+0.040t^2]\\\\\epsilon(t)=-NS(0.010+0.080t)\\\\\epsilon(t)=-(28)(\pi(0.044m)^2)(0.010T/s+0.080T/s^2(4.20s))\\\\\epsilon(t)=-0.0589V=-58.9mV[/tex]
The induced emf in the coil is -58.9mV
A 22.8 kg rocking chair begins to slide across the carpet when the push reaches 57.0 N. What is the coefficient of static friction?
Answer:
0.255
Explanation:
The following data were obtained from the question:
Force (F) = 57 N
Mass (m) = 22.8 Kg
Coefficient of static friction (µ) =...?
Next, we shall determine the normal reaction (R). This is illustrated below:
Mass (m) = 22.8 Kg
Acceleration due to gravity (g) = 9.8 m/s²
Normal reaction (R) =?
R = mg
R = 22.8 x 9.8
R = 223.44 N
Finally, we can obtain the coefficient of static friction (µ) as follow:
Force (F) = 57 N
Normal reaction (R) = 223.44 N
Coefficient of static friction (µ) =...?
F = µR
57 = µ x 223.44
Divide both side by 223.44
µ = 57/223.44
µ = 0.255
Therefore, the coefficient of static friction (µ) is 0.255.
Answer:
.255
Explanation:
I'm also on acellus and it's the right answer
Un automovil circula a 126km/h por una autopista. Su conductor observa que a 150 m delante de el, se encuentra un árbol caído que ocupa toda la calzada. Inmediatamente presiona los frenos con una aceleración de -3,5 m/s². Determinar si logra evitar el choque.
Answer:
El conductor no puede evitar el choque.
Explanation:
Primero, convierta la velocidad del conductor a m / s:
1 km/h = 0.277778 m/s
126 km/h = 126 * 0.277778 = 35 m/s
La velocidad del automóvil es de 35 m / s.
El conductor presiona los frenos con una aceleración de -3.5 m / s² para evitar un choque a 150 m por delante.
Veamos qué distancia se moverá el automóvil después de que comience a desacelerar.
Utilizaremos una de las ecuaciones de movimiento lineal de Newton:
[tex]v^2 = u^2 + 2as[/tex]
donde v = velocidad final = 0 m / s (el automóvil debe detenerse)
u = velocidad inicial = 35 m / s
a = aceleración = -3.5 m / s².
s = distancia recorrida
Por lo tanto:
[tex]0 = 35^2 + (2 * -3.5 * s)\\\\=> 1225 = 7.0s\\\\s = 1225 / 7 = 175 m[/tex]
Esto significa que el automóvil se detendrá a 175 m.
Por lo tanto, a esa velocidad y aceleración, el conductor chocará contra el árbol caído porque el automóvil no podrá detenerse antes de alcanzar la posición del árbol.
An apple falls out of a tree from a height of 2.3 m What is the impact speed of the apple?
Answer:
6.72 m/s
Explanation:
recall that the equations of motion may be expressed as
v² = u² + 2as
where,
v = final velocity,
u = initial velocity = 0 m/s because it is stationary before it starts falling
a = acceleration (in this case because it is falling, it is the acceleration due to gravity = 9.81 m/s²)
s = distance traveled = 2.3m
in our case, if we neglect air resistance, then we simply substitute the known values above into the equation of motion.
v² = u² + 2as
v² = 0² + 2(9.81)(2.3)
v² = 45.126
v = √45.126
v = 6.72 m/s
Pluto was first observed in 1930, and its largest moon, Charon, was discovered in 1978. A few years after Charon’s discovery, astronomers were able to observe a series of eclipses as Pluto and Charon passed in front of one another. By studying how the brightness of Pluto and Charon changed as they eclipsed each other, astronomers were able to measure the masses and radii of both Pluto and its moon. What did these measurements imply about the average densities of Pluto and Charon?
Answer:
The average densities of both matches the expected density for objects made from water ice.
Explanation:
Charon's density is 1.2 to 1.3 g / cm3, while Pluto's density is 1.8 to 2.1 g / cm3. This was discovered in many researches and measurements of these two celestial bodies, with the objective of understanding them and promoting efficient scientific knowledge.
With the measurements of the average densities between pluto and Charon it was possible to conclude several statements about them. Firstly, it is possible to see that the two formed independently and at different times, in addition to indicating the existence of few rocks in charon, which is consistent with the average density of objects made mostly of water ice.
A body is acted upon by a force of 4N.
As a result, the velocity of the body has
changed from 0.3 m/s to 0.1 m/s passing
through a certain distance. If the mass
of the body is 1 kg, find the distance travelled.
[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Kinematics.
so here we get as,
V^2 = U^2 + 2as
so here, a = -0.2 m/s^2
(0.1)^2 = (0.3)^2 + (-0.2)(s)
=> 0.01 = 0.09 - 0.2s
=> 0.2s = 0.08
=> s = 0.08/0.2
=> s = 0.4 m
how does an electric iron work when the power is on
Answer:
The basic principle on which the electric iron works is that when a current is passed through a piece of wire, the wire heats up. This heat is distributed to the sole (base) plate of the electric iron through conduction.
What is the formula for calculating the efficiency of a heat engine? Answers:
Why is it advisable not to look directly at the Sun? Please Give scientific reason for your answer
Answer:
your eyes would get seriously damaged
Explanation:
when you look directly at the sun, the sun shines it's rays directly to your eyes , which damage them. that's why you should always wear sunglasses in that type of weather, and never point directly at the sun. if you find this answer helpful, mark it as brainliest.
WILL GIVE BRANLIET PLS HELP!!!!! AT LEAST TAKE A LOOK!!!!! I REALLY COULD USE THE HELP!!! SHARE YO SMARTNESSS!!! Upon using Thomas Young’s double-slit experiment to obtain measurements, the following data were obtained. Use these data to determine the wavelength of light being used to create the interference pattern. Do this using three different methods. The angle to the eighth maximum is 1.12°. The distance from the slits to the screen is 302.0 cm. The distance from the central maximum to the fifth minimum is 3.33 cm. The distance between the slits is 0.000250 m.
Answer:
λ = 6,108 10⁻⁷ m = 610.8 nm
λ = 5.513 10⁻⁷ m = 551.3 nm
Explanation:
Young's double slit experiment results in a pattern consisting of maxima and minima of interference, the maximums are described by the expression
d sin θ = m λ
where d of the distance between the two slits, θ is the angle from the central maximum to the given interference line, λ the wavelength of the radiation and an integer indicating the order of interference
In this exercise they give us several conditions
The first
the angle is 1.12º to the maximum m = 8
the distance between the slits d = 0.000250 m
of the initial equation
λ = d sin θ / m
λ = 0.000250 sin 1.12 / 8
λ = 6,108 10⁻⁷ m = 610.8 nm
The second
the distance from the slits to the screen is L = 302.0 cm = 3.020 m
the distance from the central maximum is y = 3.33 cm = 0.0333 m for interference m = 5
in this case we use that the angle in the experiment is small
tan θ = y / L
tan θ = sin θ / cos θ = sin θ
we substitute
sin θ = y / L
d y / L = m λ
λ = d y / L m
we calculate
λ = 0.000250 0.0333 / (3,020 5)
λ = 5.513 10⁻⁷ m = 551.3 nm
A water pipe tapers down from an initial radius of R1 = 0.2 m to a final radius of R2 = 0.09 m. The water flows at a velocity v1 = 0.87 m/s in the larger section of pipe. What is the volume flow rate of the water?
Answer:
0.109 m/s
Explanation:
The calculation of the volume flow rate of the water is shown below:-
Av = Velocity ([tex]\pi[/tex])(Radius)^2
= 0.87([tex]\pi[/tex])(0.2)^2
= 0.135258 m^3 / sec
= 0.109371429 m/s
or
= 0.109
So, for calculating the volume flow rate of the water we simply applied the above formula i.e by multiplying the velocity with pi and squaring of radius so that the volume could come
What is electronic configuration?
Answer:
Electronic Configuration is the distribution of electrons in sub shells (s,p,d,f).
For Example,
The electronic configuration of Carbon (6 electrons) is [tex]1s^22s^22p^2[/tex]
help fast I want the correct answer please does spectral diffusion cause light to scatter
Answer: No
Explanation:
Whenever light travelling on a straight line encounters obstruction, it diffracts and scatter.
Scattering of light occurs when light passes through a rough path or a diffused surface.
But in case of spectral diffusion, which is the fluctuation in spectroscopy as a result of time dependent frequency shifts.
Spectral diffusion occurs in particular molecules initiated by excessive excitation energy.
Fluctuation in frequency does not mean diffraction of light or particles
Therefore, spectral diffusion does not cause light to scatter.
A force of 6 N is used to open a door, wherein the distance of the force to the axis of rotation is 80 cm. If the angular acceleration it acquires is 0.5 rad/s 2, determine the moment of inertia of the door.
Explanation:
∑τ = Iα
(6 N) (0.80 m) = I (0.5 rad/s²)
I = 9.6 kg m²
Samuel applies a horizontal force of 35.0 N to a sleigh over a distance of 1.50 m along a level surface. Calculate the work done on the sleigh by samuel. show your work.
Answer:
52.5 J
Explanation:
Work done (W) is the product of the force (F) applied on a body and the distance (s) moved in the direction of the force.
i.e W = F × s
It is a scalar quantity and measured in Joules (J).
Given that: F = 35.0 N and s = 1.50 m, then;
W = F × s
W = 35.0 × 1.5
= 52.5 J
Therefore, the work done on the sleigh by Samuel is 52.5 J.
differences between concave and convex meniscus
Explanation:
A concave meniscus,(normally seen) occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.
Answer:
there are differences between concave and convex menuscus
Explanation:
A concave meniscus, which is what you normally will see, occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.
A toboggan with two riders has a total mass of 87.0 kg. A third person is pushing the toboggan with a force of 42.5 N at the top of a hill with an angle of 16°. The force of friction on the toboggan is 36.0 N. Which statement describes an accurate free-body diagram to represent the situation? (Choose one of the forces acting on the system with correct magnitude and direction.)
Options:
a) An arrow of magnitude 852.6 N points perpendicular to the slope of the hill.
b) An arrow of magnitude 6.50 N points down the slope of the hill.
c) An arrow of magnitude 78.5 N points down the slope of the hill.
d) An arrow of magnitude 852.6 N points straight down.
Answer:
d) An arrow of magnitude 852.6 N points straight down.
Explanation:
The total mass of the two riders, m = 87.0 kg
The free body diagrams of the situation described are drawn and contained in the files attached to this solution.
Note that the weight of the toboggan will act directly downwards.
Therefore, the weight of the toboggan, W = mg
W = 87 * 9.8
W = 852.6 N
Since the arrow representing the weight of the toboggan points straight down, the correct answer is that an arrow of magnitude 852.6 N points straight down.
Is Einstein's equation E=mc^2 is applicable on our earth if it is not why?is it applicable in space can a body moves through speed of light
◦•●◉✿hello friend ur answer✿◉●•◦
◦•●◉✿What does E mc2 actually mean?
E = mc2. It's the world's most famous equation, but what does it really mean? "Energy equals mass times the speed of light squared." On the most basic level, the equation says that energy and mass (matter) are interchangeable; they are different forms of the same thing.✿◉●•◦
Which describes refraction? *
10 points
O
Refracted rays travel through a boundary into a new medium.
O
The angle of incidence is the same for angle of refraction
Refracted rays change direction and go back to the original medium
Answer:
Refracted rays travel through a boundary into a new medium.
Explanation:
Refracted rays travel through a boundary into a new medium. is only true for refraction.
The angle of incidence is the same for angle of refraction, is not true for refraction. Refraction follows Snell's law, states that ratio of the sine of the angle of refraction and the sine of the angle of incidence is always constant and equivalent to the ratio of phase velocities of the two mediums it is passing through.
Refracted rays change direction and go back to the original medium is false for refraction however, it is true for reflection.
A cars start from rest . after 10 seconds its acceleration become 2 meter per second find its final velocity
Answer:
[tex] \boxed{\sf Final \ velocity = 20 \ m/s} [/tex]
Given:
Initial velocity (u) = 0 m/s
Acceleration (a) = 2 m/s²
Time taken (t) = 10 seconds
To Find:
Final velocity (v)
Explanation:
[tex]\sf From \ equation \ of \ motion: \\ \sf v = u + at \\ \\ \sf v = 0 + 2(10) \\ \\ \sf v = 2 \times 10 \\ \\ \sf v = 20 \ m/s[/tex]
5. A bus starting from rest accelerates in a straight line at a constant rate of 3m/s2 for 8s. Calculate the distance travelled by the bus during this time interval.
Answer:
d = 96 meters
Explanation:
a = acceleration
t = time
d = distance
[tex]d = \frac{1}{2} \times a \times {t}^{2} [/tex]
[tex]d = \frac{1}{2} \times 3 \times {8}^{2} [/tex]
[tex]d = 96[/tex]
Convert Gravitational constant (G) = 6.67×10^-11 Nm²kg^-2 to cm³ g ^-1 s^-2.
Answer:
6.67×10⁻⁸ cm³/g/s²
Explanation:
6.67×10⁻¹¹ Nm²/kg²
= 6.67×10⁻¹¹ (kg m/s²) m²/kg²
= 6.67×10⁻¹¹ m³/kg/s²
= 6.67×10⁻¹¹ m³/kg/s² × (100 cm/m)³ × (1 kg / 1000 g)
= 6.67×10⁻⁸ cm³/g/s²
a disc starts from rest with an angular acceleration completes 10 revolutions in 2 seconds. the time taken by it to complete 10 more revolution from that instant is
Starting from rest, the disc completes [tex]\theta[/tex] revolutions after [tex]t[/tex] seconds according to
[tex]\theta=\dfrac\alpha2t^2[/tex]
with angular acceleration [tex]\alpha[/tex]. It completes 10 rev in 2 s, which means
[tex]10\,\mathrm{rev}=\dfrac\alpha2(2\,\mathrm s)^2\implies\alpha=5\dfrac{\rm rev}{\mathrm s^2}[/tex]
Find the time it takes to complete 20 rev with this acceleration:
[tex]20\,\mathrm{rev}=\dfrac12\left(5\dfrac{\rm rev}{\mathrm s^2}\right)t^2\implies t=\sqrt8\,\mathrm s\approx2.83\,\mathrm s[/tex]
so it takes approximately 0.83 s to complete 10 more rev.
A box of mass 4.5 kg is pushed across a rough surface (μK = 0.18) for a distance of 2.0 m by a constant force of 10 N. If the object reaches a speed of 2.0 m/s by the end of the push, what was its speed at the beginning of the push?
Answer:
Explanation:
Work done by force applied = force x displacement
= 10 x 2 = 20 J
Negative work done by frictional force
= μ mg x d where μ is coefficient of kinetic friction , m is mass and d is displacement
= - .18 x 4.5 x 9.8 x 2
= - 15.87 J
Net positive work done on the mass = 4.13 J
If v was the initial velocity
increase in kinetic energy = positive work done on mass
= 1 / 2 m v² - 1/2 m u² = 4.13 where v is final and u is initial velocity
1 /2 x 4.5 x 2 ² - 1/2 x 4.5 u² = 4.13
9 - 2.25 u² = 4.13
2.25 u² = 4.87
u² = 2.16
u = 1.47 m /s .
A car speeds over a hill past point A, as shown in the figure. What is the maximum speed the car can have at point A such that its tires will not leave the track? Round to one decimal place and include units. Image:
Answer:
see explanations below
Explanation:
At the point when the car leaves the track, the reaction on the road is zero, meaning that the centrifugal force equals the gravitation force, namely
mv^2/r = mg
Solve for v in SI units
v^2 = gr = 9.81 m/s^2 * 14.2 m = 139.302 m^2/s^2
v = sqrt(139.302) = 11.8 m/s
Answer: at 11.8 m/s (26.4 mph) car will leave the track.
The coil of wire in the center of the screen encompasses an area through which magnetic field lines pass, so there is a magnetic flux through those coils. With the magnet stationary, is this magnetic flux producing any flow of current or potential difference?
Answer:
No, the coil will produce no flow of current or potential difference.
Explanation:
Magnetic field flux is the number of magnetic field line passing through a given area. It depends on the area and the magnetic field strength through this area. For electromagnetic induction to occur, there must be a constantly changing magnetic field. This is according to Faraday's law of electromagnetic induction that states that the induced EMF is directly proportional to the rate of change in flux ΔФ/Δt, and is also proportional to the number of turns on the coil. A changing magnetic field will lead to a break in the flux linkage, which induces current or potential difference on the coil. A stationary coil through a magnetic filed will therefore produce no electric flow of current or potential difference on the coil.
0.0000302 in scientific notation
Answer:
3.02x10^-5
Explanation:
A scientific notation consists of
c x 10^n
the c must be a number between 1-9, while n must be an integer.
it indicates the c being multiplied by the nth power of 10.
From 0.0000302, we need to move the decimal to after 3 so that 3.02 can be a number between 1-9. When moving the decimal point to the right side, each digit moved counts as -1 power of 10.
So, to give 3.02, we need to move the decimal by 5 digits. hence, we can conclude n = -5.
0.0000302 = 3.02x10^-5
Will Mark Brainliest if Correct PLZ!!!!! A bullet is shot at some angle above the horizontal at an initial velocity of 87m/s on a level surface. It travels in the air for 13.6 seconds before it strikes the ground 760 m from the shooter. At what angle above the horizontal was the bullet fired? Round to the nearest whole number and include units in your answer Use g= -9.8 m/s2 for the acceleration of gravity.
Answer:
≅50°
Explanation:
We have a bullet flying through the air with only gravity pulling it down, so let's use one of our kinematic equations:
Δx=V₀t+at²/2
And since we're using Δx, V₀ should really be the initial velocity in the x-direction. So:
Δx=(V₀cosθ)t+at²/2
Now luckily we are given everything we need to solve (or you found the info before posting here):
Δx=760 mV₀=87 m/st=13.6 sa=g=-9.8 m/s²; however, at 760 m, the acceleration of the bullet is 0 because it has already hit the ground at this point!With that we can plug the values in to get:
[tex]760=(87)(cos\theta )(13.6)+\frac{(0)(13.6^{2}) }{2}[/tex]
[tex]760=(1183.2)(cos\theta)[/tex]
[tex]cos\theta=\frac{760}{1183.2}[/tex]
[tex]\theta=cos^{-1}(\frac{760}{1183.2})\approx50^{o}[/tex]