Answer:
Increased clearance provides less sensitivity to shaft, block, and connecting rod deflections and the resulting misalignments that result from the higher levels of loading in these engines. Use of synthetic oils with their better flow properties can help to reduce fluid film friction
Explanation:
Answer:
if your talking about cars i got the answer for you
Explanation:
if the clearance is too little you will have rod knock in the engine and if the clearance is too big the pressure in the cylinders won't be enough to power the motor.
Which of the following factors put you at risk for injury?
Select the 3 answer options that apply.
Repetitive motions
Prolonged exposure to vibration
Long periods of localized pressure
Neutral postures
Answer:
repetitive motion prolonged exposure long periods of pressure
2555 divided by 4 with a remainder plllllssssssssssssssssssssssss i need help
Answer:
638.75
Explanation:
this is gonna be your answer
Which is equal to a temperature of 50°F?
18°C
46°C
10°C
32°C
Answer:
10°C degrees po ang sagot
The converted temperature in Fahrenheit to Celsius is "10°C", and the calculation can be defined as follows:
Fahrenheit to Celsius temperature calculation:
Temperature is indeed a unit of measurement for hotness or coldness that can be represented in Fahrenheit or Celsius.
The temperature in Fahrenheit = 50°F
Formula to convert the temperature:
⇒ C = [tex]\frac{5}{9}[/tex] × (F-32)
= [tex]\frac{5}{9}[/tex] × (50-32)
= [tex]\frac{5}{9}[/tex] × (18)
= 5× (2)
= 10°C
Therefore, the converted temperature is "10°C".
Find out more about the temperature here:
brainly.com/question/11464844
Assuming the vertical sensitivity control is set to 0.5 volts per division, and the timebase control is set to 2.5 ms per division, calculate the amplitude of this sine wave in volts peak
Answer:
Amplitude of sine wave in volts peak = 2.25 V
Explanation:
Given:
Vertical sensitivity control = 0.5 volts per division
Time base control = 2.5 ms per division
Find:
Amplitude of sine wave in volts peak
Computation:
Amplitude of sine wave in volts peak = 4¹/₂[volts per division]
Amplitude of sine wave in volts peak = 4¹/₂[0.5]
Amplitude of sine wave in volts peak = 4.5[0.5]
Amplitude of sine wave in volts peak = 2.25 V
Jogar bola ajuda em que?
Answer:
se você quer dizer "bola" como no basquete, os benefícios de jogar basquete são uma enorme quantidade de resistência mental e física e habilidades exigidas de cada jogador
Explanation:
Answer:
ajuda na coordenação motora
Explanation: :)
Automatic transmissions generate a lot of heat. Which of the following is true?
a
Excessive heat shortens the life of the transmission.
b
Excessive heat is recaptured and converted to electricity.
c
Excessive heat lengthens the life of the transmission.
d
Excessive heat is used to warm the passenger’s cabin.
A- Excessive heat shortens the life of the transmission.
Once the car is moving, the automatic transmission fluid (ATF) heats up quite quickly. The typical temperature range at which most fluids are meant to operate is 175 degrees F, which is raised by normal driving. Thus, option A is correct.
What Automatic transmissions generate a lot of heat?The torque converter is where most heat is produced. The link between the engine and the automatic transmission is provided by the torque converter. Additionally, it is made to slip like a clutch, allowing the car to stop moving while the engine is still running.
Additionally, an automatic transmission's torque converter generates a lot of heat. The majority of slide occurs at stationary, therefore this mostly happens then. On the other hand, a malfunctioning lookup clutch can permit the torque converter to keep slipping while driving, producing an excessive amount of heat.
Therefore, Excessive heat shortens the life of the transmission.
Learn more about transmissions here:
https://brainly.com/question/13142496
#SPJ2
Elijah wants to make some changes to a game that he is creating. Elijah wants to move the bleachers to the right, the coaches to the left, and the players to the center. What does Elijah want to change in the game?
the interface
the variable
the conditional loop
the editor
help soon pls-
Answer:
the editor
Explanation:
i got it right on the quiz!!!!!
hope this helps
If the variable step is set to equal 5 and then the code reads step = step + 2, what will step now equal?
0
2
5
7
can someone actually help instead of taking points please
Packaging Engineers do all of the following except: a. sample food items b. establish standards and guidelines for the product c. develop tasting plans d. oversee package development
Best known for his invention of the pressure-ignited heat engine that bears his name,
was also a well-respected thermal engineer and a social theorist.
A. Georg Ohm
B. Rudolf Deisel
C. James Joule
D. Michael Faraday
When trying to determine plumb or level, the
contact the surface
of the level should
1 face
2 edge
3 end
4 all the above
28. What is the value of a resistor in a series circuit if you measure 0.5 amps flowing through it and 15 volts
across it?
29
A lightbulb using 120 V and 1 A is using how many watts?
hing
tarm with the correct definition
Which of the following answer options are your employer's responsibility?
Select all that apply.
Develop a written hazard communication program
Implement a hazard communication program
Maintain a written hazard communication program
Answer:
Develop a written hazard communication program
Implement a hazard communication program
Maintain a written hazard communication program
Explanation:
To find - Which of the following answer options are your employer's responsibility? Select all that apply.
Develop a written hazard communication program
Implement a hazard communication program
Maintain a written hazard communication program
Solution -
The correct options are -
Develop a written hazard communication program
Implement a hazard communication program
Maintain a written hazard communication program
All are the Responsibilities of an employer
Reason -
The most important duty of the employer is to stay alert and implement a correctly and efficiently written communication program related to hazards of the substances in the workplace.
He also has to maintain the program so that employees do not get affected.
Poor housekeeping exposes workers to several types of hazards. From the answer options below, select the hazards which relate to poor housekeeping.
Select the 3 answer options that apply.
Tripping hazards
Fire and explosion hazards
Hazards associated with harboring pests, such as rats or mice
Ergonomic hazards
Answer:
Tripping hazards
Fire and explosion hazards
Hazards associated with harboring pests, such as rats or mice
Explanation:
The correct options are -
Tripping hazards
Fire and explosion hazards
Hazards associated with harboring pests, such as rats or mice
What reading will a digital multimeter indicate, when set to the 4A scale, if the actual current flow is 200mA?0.002 A
0.020 A
0.200 A
2.000 A
Answer:
Current flow in ampere according to 4A scale = 0.2 Ampere
Explanation:
Given;
Current flow = 200 milliampere
Find:
Current flow in ampere according to 4A scale
Computation:
We know that
1 ampere = 1,000 milliampere
So,
1 milliampere = 1/1,000 ampere
Current flow = 200 milliampere
Current flow = 200[1/1,000]
Current flow = 200[0.001]
Current flow = 0.2
Current flow in ampere according to 4A scale = 0.2 Ampere
define the branches of engineering with work field?
In broad terms, engineering can be divided into four main categories – chemical, civil, electrical and mechanical engineering
In a case where electrical current leakage from the circuit occurs, the GFCI would do the following:
Place the options in the correct order.
Trip the circuit
Cut off the electricity
Sense the current leakage
Answer:
Sense the current leakage
Trip the circuit
Cut off the electricity
Explanation:
The correct order is -
Sense the current leakage
Trip the circuit
Cut off the electricity
Reason -
First step has to be taken to sense the electric current leakage without it being detected, it cant be dealt with.
The second step consists of tripping the circuit so at to remove the flow of electricity.
The third step is to Cut the electricity off so to stop the leakage and be safe.
Which of the following statements about static electricity is true?
A.
Can ignite flammable fluids.
B.
Is always present in flammable fluids.
C.
Generates only harmless sparks.
D.
Occurs when transferring fluids.
define engineer with work field
Answer:
If you're talking about a field engineer then here is the basic description of their job.
Explanation:
They usually inspect and install equipment, direct workers, and report project status. They are in charge of making sure everything works smoothly. Engineers who work in the field oversee projects and are usually traveling.
Question 150 (1 point)
The only difference between an isometric drawing and an isometric projection is the
O terminology
representation
Size
both a and 6
(0)
none of the above
Previous Page
Next Page
Answer:
terminology
is the right answer
hope this is helpful
If a certified LEED professional is primarily concerned with existing structures, then which specific professional certification is this professional
likeliest to have?
O Homes
o Operations + Maintenance
O Interior Design + Construction
O Building Design + Construction
Answer: Operations + Maintenance
Explanation:
Since the certified LEED professional is primarily concerned with existing structures, then the professional certification that the person is likely to have is Operations + Maintenance.
The person isn't likely to have a professional certification in interior design as it's not vital in this scenario. Likewise, since it's an existing structure, a building design won't be necessary.