Answer:
Sublimation is a critical component for the water cycle in cold climates where water in the solid form or ice is prevalent because sublimation which is the transformation of a solid substance to a liquid without passing through the liquid phase including when ice transforms directly into vapors, readily takes place when the relative humidity is low and the wind is dry, which are conditions that can be found combined mainly in cold climates
Explanation:
it is sunny today is that whether or climate this isn't chemistry but...
Answer:
weather
Explanation:
Students measuring the mass of a metal block record 2.985 g, 3.051 g, 3.102
g, and 3.211 g. Which other measurement of the block's mass would be most
precise?
A. 2.804 g
B. 3.1159
C. 3.418 g
D. 3.509 g
Answer:C - 3.115 g
Explanation:Correct
Elements with atomic numbers 7 and 83 have how many valence electrons? *
5 and 5 valence electrons
4 and 8 valence electrons
2 and 2 valence electrons
7 and 83 valence electrons
Explanation:
element with atomic numbers 7 and 83 have 5 and 5 valence electrons
4. The nucleus of an atom is positively charged due to
A. electrons b. neutrons C. proton D. Ion
Answer:
Protons
Explanation:
Electrons have a negative charge which are found in shells around the nucleus. The nucleus consists of protons and neutron and the neutron has a neutral charge.
What is the independent variable based on the hypothesis below?
"If acid rain is in water, then fish populations will increase"
Answer:
Acid rain
Explanation:
The independent variable in the hypothesis statement is the acid rain. An independent variable is usually the cause in an experiment.
This variable give rises to the effects observed as the dependent variable.
In the presence of the acid rain, the fish population will increase.
The dependent variable is the fish population or number of fishes.
The independent variable is the acid rain as it is the cause of the effect observed on the fish population.
This water bottle has a mass of 0.5 kg.
CU
If the net force acting on the bottle is 5 N to the right, what is the bottle's
acceleration?
(Hint: Use the formula a = =)
A. a = 10 m/s2 left
B. a = 50 m/s2 right
c. a = 10 m/s2 right
D. a = 2 m/s2 left
PLEASE ANSWER I WILL GIVE BRAINLYEST
Answer: the answer is a=10m/s^2 right
Explanation: it just make more since then the other answers .
Answer:
c 10
Explanation:
ape.x verified
How many atoms in:
1. NiO -
2. CuO -
3. BaO -
(Pls help ill give brainliest!)
Answer:
I think it might be:
NiO=2
CuO=4
BaO=2
Explanation:
Hope this helps.
After 4797 years, how much of the original 250 g of radium-226 remains, if
the half-life of radium-226 is 1599 years? *
125 grams
62.5 grams
31.3 grams
O 75.0 grams
Answer:
31.3grams
Explanation:
The amount of a radioactive element that remains, N(t), can be calculated by using the formula;
N(t) = N(o) × 0.5^{t/t(1/2)}
Where;
N(t) = mass of substance remaining
N(o) = mass of original substance
t(1/2) = half-life of substance
t = time elapsed
From the provided information; N(t) = ?, N(o) = 250g, t(1/2) = 1599 years, t = 4797 years
N(t) = 250 × 0.5^{4797/1599}
N(t) = 250 × 0.5^(3)
N(t) = 250 × 0.125
N(t) = 31.25g
N(t) = 31.3grams
The combination of all the organ systems working together make up a(n) _______________________.
1.organ system
2.organism
3.organ
4.cell
Answer:
2
Explanation:
What's the ABBREVIATED electron configuration for cobalt?
Answer:
Cobalt/Electron configuration
Explanation:
[Ar] 3d7 4s2
A 25.00 ml solution containing 0.033 M sodium acetate is titrated with a 0.098 M solution of HCl. How mar
milliliters of HCl are required to reach the endpoint?
Answer:
[tex]8.42\ \text{mL}[/tex]
Explanation:
When the endpoint is reached the millimoles of sodium acetate and HCl will be equal.
[tex]\text{Volume of sodium acetate}=25\ \text{mL}[/tex]
[tex]\text{Molarity of sodium acetate}=0.033M[/tex]
[tex]\text{Molarity of HCl}=0.098M[/tex]
[tex]\text{Millimoles of sodium acetate}=25\times 0.033=0.825\ \text{mmol}[/tex]
Let [tex]V=\text{Volume of HCl}[/tex]
[tex]\text{Millimoles of HCl}=0.098V[/tex]
At end point the millimoles will be equal to that of sodium acetate
[tex]0.825=0.098V\\\Rightarrow V=\dfrac{0.825}{0.098}\\\Rightarrow V=8.42\ \text{mL}[/tex]
The volume of HCl required is [tex]8.42\ \text{mL}[/tex].
The volume of HCl required to required to reach endpoint is 8.42 mL
From the question,
We are to determine the volume of HCl required to reach endpoint
First, we will write a balanced chemical equation for the reaction.
The balanced chemical equation for the reaction is
CH₃COONa + HCl → CH₃COOH + NaCl
This means
1 mole of sodium acetate is required to completely neutralize 1 mole of HCl
Now, we will determine the number of moles of sodium acetate present
Using the formula
Number of moles = Concentration × Volume
Concentration of sodium acetate = 0.033 M
Volume of sodium acetate = 25.00 mL = 0.025 L
∴ Number of moles of sodium acetate present = 0.033 × 0.025
Number of moles of sodium acetate present = 0.000825 mole
Now,
Since, 1 mole of sodium acetate is required to completely neutralize 1 mole of HCl
Then,
0.000825 mole of sodium acetate would be required to completely neutralize 0.000825 mole of HCl
∴ The number of moles of HCl needed is 0.000825 mole
Now, for the volume of 0.098 M HCl required to reach endpoint
Using the formula
[tex]Volume = \frac{Number\ of\ moles}{Concentration}[/tex]
∴ Volume of HCl required to required to reach endpoint = [tex]\frac{0.000825}{0.098}[/tex]
Volume of HCl required to required to reach endpoint = 0.008418367 L
Volume of HCl required to required to reach endpoint = 8.418367 mL
Volume of HCl required to required to reach endpoint ≅ 8.42 mL
Hence, the volume of HCl required to required to reach endpoint is 8.42 mL
Learn more here: https://brainly.com/question/9698827
Do all irreversible reactions go to completion? If so why?
Answer:
True
Explanation:
All irreversible reactions go to completion because the process cannot proceed in the backward direction.
A reversible reaction is one that does not go into completion in one direction.
An irreversible direction completely uses up the reactants to form the products and goes into completion.
These reactions can only proceed in one direction and not both.
In the reaction 2Li(s) + 2H20(1) 2LIOH(aq) + H2(g), which compound is in
the liquid state?
A. H20
B. LiOH
C. Li
O D. H2
Answer:
liquid state is an intermediate phase between solid and gas phase
Answer is A. H20
Answer:
H2O
Explanation:
As H2 is a gas, and the question asks for the liquid state, it'd be H2O.
When the following equation is balanced, the coefficients are __________. Al(NO3)3 + Na2S → Al2S3 + Na(NO3)
The balanced coefficients in the reaction are now; 2, 3, 1, 3.
A balanced chemical reaction equation is one in which the number of atoms of each element on the right hand side of the reaction equation is equal to the number of atoms of the same element on the left hand side of the reaction equation.
For the reaction show, the balanced reaction equation is; 2Al(NO3)3 + 3Na2S → Al2S3 +3 Na(NO3). The balanced coefficients in the reaction are now; 2, 3, 1, 3.
Learn more about reaction equations: https://brainly.com/question/15939621
Fill in the coefficients that will balance the following reaction:
(Note: Use 1 as coefficient where appropriate.)
_C3H7OH + _O2 → _CO2 + _H2O
does boron or lithium have a greater first ionization energy ?
Answer:
beryllium has a higher ionization energy because its radius is smaller. boron has a higher ionization energy because its radius is smaller.
Do the molecules in cold things move fast or slow?
Answer:
slow
Explanation:
according to kinetic molecular theory,as the temperature decreases the kinetic energy of molecules decreases
t∝k.ewhat will occurs during electrolysis of dilute sulphuric acid
Answer:
In the electrolysis of dilute sulfuric acid, which electrolysis in aqueous solution to form hydrogen ions, H⁺, and sulfur IV ions SO₄²⁻ in the presence of H⁺ and OH⁻ ions from the water molecules
At the anode
The anode, positive electrode, attracts the negative OH⁻ and SO₄²⁻ ions where the OH⁻ gives up electrons to form water molecules and oxygen as follows;
4OH⁻ → 2H₂O + O₂ + 4e⁻
At the cathode
The positive H⁺ ions from the water molecules and the acid are attracted to the cathode where they combine with 2 electrons to form hydrogen gas as follows;
2e⁻ + 2H⁺ → H₂ (gas)
Explanation:
Is buoyancy a physical or chemical property?
Fill in the coefficients that will balance the following reaction:
(Note: Use 1 as coefficient where appropriate.)
CH4 +
O2 →
CO2 +
H2O
Answer:
CH4 + 2 O2 → CO2 + 2 H2O
Explanation:
There are one mole of O2 on the left side and on the right side there are three moles of O2. And to fix it you would need to make it two moles of O2 to have four molecules of O2 on the left side. Then you would make two moles of H2O to have a total of four moles of O2 on the right. Therefore, CH4 + 2 O2 → CO2 + 2 H2O is the answer.
Answer:
1,2,1,2
Explanation:
hope this helped!
the highest level of organization is
.Answer:
.Marie Kondo
Answer:
Federal Government
Explanation:
:)))))))))
✌❤✌❤
hi can someone help me with these 2 :)
Answer:
a and d
Explanation:
How do you differentiate a neutral solution like water and a strong acid solution like battery acid?
Answer:
If the pH of a solution is less than 7, the solution is called acidic; if the pH is about 7, the solution is neutral; if the pH is greater than 7, the solution is is called basic. In an acidic solution, then, the concentration of hydrogen ions is greater than the concentration of hydroxide ions.
Explanation:
Not sure about the context of the question, but you can check with a ph scale tester.
Please give formulas of how you solved I only need help on a but if you can do all that I would appreciate that.
Answer:
3.1 moles of ammonia
18.67× 10²³ molecules
Mass = 52.7 g
Explanation:
Given data:
Number of atoms of hydrogen = 5.68×10²⁴ atoms
A) Number of molecules of ammonia = ?
Solution:
First of all we will calculate the number of moles of hydrogen.
1 mole = 6.022× 10²³ atoms
5.68×10²⁴ atoms × 1 mol / 6.022× 10²³ atoms
0.94×10¹ mol
9.4 moles of hydrogen
Moles of ammonia:
3 moles of hydrogen are present in one mole of ammonia.
9.4 moles of hydrogen = 1/3×9.4 =
3.1 moles of ammonia
Number of molecules of ammonia:
1 mole contain 6.022× 10²³ molecules.
3.1 mol × 6.022× 10²³ molecules / 1 mol
18.67× 10²³ molecules
c) Mass of sample = ?
Mass = number of moles × molar mass
Mass = 3.1 moles × 17 g/mol
Mass = 52.7 g
Group 17 is called the halogen family, and the group to its right is called the noble gases. How are these elements alike and how are they different?
Explanation:
The halogen family and noble gases are similar in just one particular way, they are groups of non-metals. All members of these two groups are categorized as non-metals.
Here are some of the differences between them;
Halogens have 7 electrons in their outermost shell whereas noble gases have 8 electrons in theirs. Halogens are highly reactive elements, noble gases are non-reactive. Halogens are made up of electronegative elements where as noble gases are neither electropositive nor electronegative.9. Gasoline burns easily if ignited
a) Chemical property
b) Chemical change
c) Physical property
O d) Physical change
Answer:
I think it is chemical change
which of the following would form an ionic bond?
a.strontium and oxygen
b. sulfur and oxygen
can someone please help me i don't know these question bc my family celebrates thanksgiving differently. plz and thank you :3
Easy: How many turkeys are consumed on Thanksgiving day in America?
Medium: How long did the first Thanksgiving Celebration last?
Hard: When was the first NFL football game on Thanksgiving?
Fun: Who was the first president to pardon a turkey?
Answer:
Easy 46 million turkeys
Medium three days
Hard: 1934
Fun: The first President on record issuing a "pardon" to his turkey was Ronald Reagan.
Explanation:
hop tis helped
What is the oxidation number of an element? PLz help. Will give brainliest to correct answer. explanation helpful but not required. Dont answer unless you know
Answer:
its eathe a or c a 50/50 chance
Answer:
Explanation:
its B
(please mark as brainliest if it's correct)
ANSWER THIS TO BE MARKED BRAINILEST Water in a beaker measures 250 milliliters. A rock is completely submerged in the water. The water level now reads 375 milliliters. What is the volume of the rock in cubic centimeters? Explain your answer
Answer:
125 cubic meters
Explanation:
Subtract 375-250=125 cubic meters