Explanation:
Sound travels fastest through solids. This is because molecules in a solid medium are much closer together than those in a liquid or gas, allowing sound waves to travel more quickly through it. In fact, sound waves travel over 17 times faster through steel than through air.
Sound waves move faster in solids where the particles are compacted than in gases where the molecules are far apart from each other.
We know that the particles in a solid are held together by strong intermolecular forces while the particles in a gas are not held together by intermolecular forces.Since sound waves are transmitted as vibrations, sound waves move faster in solids where the particles are compacted than in gases where the molecules are far apart from each other.Hence, sound moves faster in a solid than in gases.
Learn more about speed of sound: https://brainly.com/question/15381147
An unknown hydrocarbon compound was analyzed for hydrogen by elemental analysis and results show that it contains 15.88 % H. What is the empirical formula
Answer:
C4H9
Explanation:
If H = 15.88%
Then C = 100.00 – 15.88 = 84.12
Divide each % value by respective atomic mass
H = 15.88/1 = 15.88
C = 84.12/12 = 7.01
Divide through by smaller value
H = 15.88/7.01 = 2.26
C = 7.01/7.01 = 1
Remove fraction , multiply by 4
H = 9
C = 4
Empirical formula = C4H9
The hydrocarbon could be ( C4H9)2 = C8H18 = octane.
The collision theory state that?
Answer:
Collision theory states that molecules must collide to react. For most reactions, however, only a small fraction of collisions produce a reaction.
list several characteristics of ligroin
- Petroleum fraction consisting mostly of [tex]C_{7}[/tex] and [tex]C_{8}[/tex] hydrocarbons
- The fraction is also called heavy naphtha
- Boiling in the range 90‒140 °C
- Ligroin is used as a laboratory solvent
- Ligroin it also esed as a motor fuel or as a solvent for fats and oils in dry cleaning
[] All of these are different characteristics of ligroin
[] If you need more let me know
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Suppose you are performing a titration. At the beginning of the titration, you read the titrant volume as 2.51 mL. After running the titration and reaching the endpoint, you read the titrant volume as 29.95 mL. What volume, in mL, of titrant was required for the titration
The volume of titrant required for the titration would be 27.44 mL
From the illustration, the initial titrant volume was 2.51 mL. This figure represents the initial reading on the burette.
In the same vein, the final volume of the titrant was 29.95 mL. This figure represents the final reading on the burette.
In order to get the volume of titrant used:
Volume of titrant used = final volume - initial volume
= 29.95 - 2.51
= 27.44 mL
More on the volume of titrant used in titrations can be found here: https://brainly.com/question/4250180
the farm is a place where lot's of different__________and________live.goats have________that arch backward.the horns keep them___________.
horns insects animals protected
dog's are man's best friend.dogs eat ______to keep them energetic.dogs permanent__________are ________.a dogs teeth serve as _______and as tools for ________or________food
meat cutting powerful teeth weapon tearing
Answer:
plantsanimalshornsto protect it selfkaleliving with peoplescaring itspecialbite eatExplanation:
I know it's right, because this answer is from my self and I hope it's help to us. keep learning and God bless.
What is the limiting reactant from this equation
Answer:
A Option is the correct answer.
Explanation:
what is the chemistry
Answer:
physical science
According to 2 sources
Chemistry is a physical science Chemistry is typically considered a physical science, as defined by the Encyclopedia Britannica, because the study of chemistry does not involve living things. Most of the chemistry involved in research and development, such as making new products and materials for customers, falls within this purview.
Explanation:
PA BRAINLIEST
HOPE IT HELPS
Indicate the general type of reaction represented in each the reactions: The starting material is a 6 membered ring with an internal alkene between carbons 1 and 2. The product is a six membered ring with a bond to X on carbon 1 and a bond to Y on carbon 2. What type of reaction is Reaction A
The reaction as described is an addition reaction in which a saturated product is obtained.
The information we have from the question is that; the starting material is a 6 membered ring with an internal alkene between carbons 1 and 2. The product is a six membered ring with a bond to X on carbon 1 and a bond to Y on carbon 2.
We know that an addition reaction is one in which a molecule is added across the double bond to yield a saturated product. The reaction A described has to do with he addition of a molecule XY to a six member alkene to obtain the saturated product as described.
Learn more: https://brainly.com/question/2510654
A mixture of two gases with a total pressure of 2.78 atm contains 0.70 atm of Gas A. What is the partial pressure of Gas B in atm
Answer:
2.08 atm
Explanation:
Here we use Dalton's Law of Partial Pressures: Pa+Pb=Ptotal. 0.70 atm + Pb = 2.78 atm. To find the missing pressure of gas b we subtract .7 from the 2.78
What is the name of the branched alkane shown below?
لہ
A. 3-methyloctane
B. 4-methylheptane
C. 3-methylheptane
D. 4-methyloctane
Answer:
4-methyloctane
Explanation:
other guy got it wrong, this one's right
The name of the branched alkane is 4-methyloctane as it has 8 carbon atoms.
What is an atom?An atom is defined as the smallest pa of matter which makes a basis of an element. Every form of matter whether it be a solid,liquid , gas consists of atoms . Each atom has a nucleus which is contains protons and neutrons and shells in which the electrons revolve.
The protons are positively charged particles and neutrons are neutral particles and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged particles and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not change the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/29695801
#SPJ7
Draw an example of a buffer in the body.
Explanation:
this is answer.
plz help someone thx
Answer:
Glycerin
Explanation:
The stronger the intermolecular forces of attraction the more energy is required to break those forces, if you need more energy to break these forces it means that these certain elements would have a higher boiling point. Which is why the answer is Glycerin, the highest boiling point of an element means that it has the strongest forces, which in this case is electrostatic forces.
Answer:
Glycerin
Explanation:
The rows in the periodic table are called periods. What is true about elements in the same period?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~ B
Their atomic numbers increase 1 from left to right ~
When the concentration of SO2(g) is increased to 1.48 M, the ratio of products to reactants is 1.4. The equilibrium constant for the reaction is 14. In which direction will the reaction shift to regain equilibrium
Answer:
Towards the products
Explanation:
The equilibrium constant for the reaction is 14. The equilibrium will shift towards the product.
What is equilibrium?Equilibrium is defined as a condition in which the forward and backward reaction rates are identical. When all of the external forces acting on an object are balanced, the object is said to be in equilibrium in a reference coordinate system. This indicates that all external forces and moments acting on this item have a net effect of zero.
When sulfur dioxide SO2 concentration is increased, the Q value rises to 1.4.
Q = [ SO₃ ]² / [ SO₂ ]² [ O₂ ]
Q = 1.4
Where K
K = [ SO₃ ]² / [ SO₂ ]² [ O₂ ]
K = 14
Q will shift to the right to consume the extra SO2 and restore the equilibrium position since Q is less than K.
Thus, the equilibrium constant for the reaction is 14. The equilibrium will shift towards the product.
To learn more about equilibrium, refer to the link below:
https://brainly.com/question/28527601
#SPJ5
Which two metals shown won't make a solid when combined with anything? 2.2.2
Answer:
aluminum Zicam iron
Explanation:
Which metals dont react with anything?
Metals like aluminium, iron and zinc do not react either with cold or hot water. But they react with steam to form the metal oxide and
how to draw ethyl structural formula?
Answer:
c2H5
Explanation:
H. H
|. |
C-C- H
|. |
H. H
Which of the following is an example of climate?
A. The polar regions have long winters and short, cool summers.
B. Humidity levels are high today.
C. Canada experienced an unusually warm summer this year.
D. Tornados formed across Oklahoma yesterday.
Answer:
A. The polar regions have long winters and short, cool summers.
Explanation:
Climate is location based, however is over long periods of time, so Canada would not be considered because it is only 1 summer
PLEASE HELP
1. A closed bottle contains a mixture of Ar and O2 at 25.3°C. If the partial pressure of Ar in
the bottle is 0.447 atm and the total pressure of the bottle is 1.024 atm, what is the partial
pressure of O2 in the bottle?
Answer: 0.79 atm
Explanation:
The Ideal Gas Law is PV=nRT.
since both Ar and O2 have the same volume and temperature, the only variable causing the differnce in pressure betwwen the 2 gases is the number of moles
the total pressure = the partial pressure of Ar + the partial pressure of O2
1.024 atm = 0.447 amt + ?
so
? = 1.24 -0,447 = 1.24 - 0.45= 0.79 atmthe total pressure of the bottle is 1.024 atm, what is the partial
pressure of O2 in the bottle? is PV
Which one of the following salts has the highest molar solubility in water?
Answer:
Correct option is
C
Ag
2
CO
3
; K
sp
=6.2×10
−12
(A) For CaCO
3
,S=
Ksp
=
8.7×10
−9
=9.3×10
−5
M
(B) For CuS,S=
Ksp
=
8.5×10
−45
=9.2×10
−23
M
(C) For Ag
2
CO
3
,S=(Ksp/4)
1/3
=(6.2×10
−12
/4)
1/3
=1.15×10
−4
M
(D) For Pb(IO
3
)
2
,S=(Ksp/4)
1/3
=(2.6×10
−13
/4)
1/3
=4×10
−5
M
Hence, Ag
2
CO
3
has the greatest molar solubility in pure water.
a peanut butter and jelly sandwich contains 9.00 g of fat, 6.00 g of protein, and 25.0 g of carbohydrate. How many calories does this sandwich provide?
Answer:
205 calories.
Explanation:
According to the USDA, "Carbohydrates provide 4 calories per gram, protein provides 4 calories per gram, and fat provides 9 calories per gram." 9 grams of fat at 9 calories per equals 81 calories + 6 grams of protein at 4 calories per gram which equals 24 calories + 25 grams of carbohydrate at 4 calories per gram which is equal to 100 calories.
Total that all up and you get 81 cal + 24 cal + 100 cal=205 calories.
I don't know what kind of course this is for, but if they are incredibly picky, what we refer to as "calories" are actually kilocalories, which are equal to one thousand "real" calories each. However, I'm very confident that the correct answer is 205 calories.
The sandwich will provide 205 calories.
What is calories?A calorie is an energy unit. It's the quantity of heat needed to increase the temperature of one gramme of water by [tex]1^{0} C[/tex] at one atmosphere of pressure.
Its is given that, Fat = 9 g, protein = 6 g, carbohydrate = 25 g.
It is known that, fat contains 9 calories / gram , carbohydrate contains 4 calories / gram and protein contains 4 calories / gram.
Now, adding all terms.
Total calories = (9×9) +(6×4) +(25×4)
= 205 calories.
Therefore, the sandwich will provide a total of 205 calories.
To know more about calories
https://brainly.com/question/22374134.
#SPJ2
Which of the sequence best describe how a piece of chicken nugget is digested in the human body?
mouth, esophagus, small intestine, large intestine, stomach
mouth, esophagus, small intestine, large intestine, stomach
mouth, stomach, small intestine, large intestine, esophagus
mouth, stomach, small intestine, large intestine, esophagus
mouth, esophagus, stomach, small intestine, large intestine
mouth, esophagus, stomach, small intestine, large intestine
None of the above
The sequence for the disgestion of a piece of chicken nugget in the human body is: C. mouth, esophagus, stomach, small intestine, large intestine.
What is digestion?Digestion can be defined as a form of catabolic activity that involves the breaking down of food into smaller sizes that can be absorbed as nutrients by the body of a living organism while releasing energy through the process.
Based on the digestive system, the sequence for the disgestion of a piece of chicken nugget in the human body are:
MouthEsophagusStomachSmall intestineLarge intestineRead more on disgestion here: https://brainly.com/question/22686081
What statement describes how water is involved in weathering a rock?
Answer:
Water, in either liquid or solid form, is often a key agent of mechanical weathering. For instance, liquid water can seep into cracks and crevices in rock. If temperatures drop low enough, the water will freeze. ... Changes in temperature cause rock to expand (with heat) and contract (with cold).
Answer:
the rock has been rubbed away at for hundreds or thousands of years and the water steady washed the rock away. hope this helped.
Recreational drug users often obtain the drug as a white powder with unknown purity. Some users snort the power, whereas others make a solution and take it orally or inject it. To achieve a ketamine high, users usually need to take between 0.1 mg/kg and 1 mg/kg of ketamine. However, taking 2 mg/kg can lead the user to experience a K-hole or to enter an unconscious state.
If the user dissolves exactly 1 g of ketamine in 1/4 cup of water, what is the concentration of ketamine in milligrams per milliliter (mg/mL)? 1 cup=236.5 mL
What volume, in milliliters, of the recreational ketamine in the previous question would a 59.0 kg user need to take to experience a high at 0.600 mg/kg?
How many milliliters would that same user need to take to become unconscious at 2.00 mg/kg?
A user dissolves exactly 1 g of ketamine in 1/4 cup of water.
Given 1 cup = 236.5 mL, the volume of 1/4 cup of water is:
1/4 cup × (236.5 mL/1 cup) = 59.13 mL
1 g of ketamine is dissolved in 59.13 mL of water. The concentration of ketamine, in mg/mL, is:
C = 1000 mg / 59.13 mL = 16.91 mg/mL
Part 2The volume of this solution that a 59.0 kg user (body mass) would have to consume to experience a high at 0.600 mg/Kg is:
[tex]59.0 kgBM \times \frac{0.600mgKetamine}{1kgBM} \times \frac{1mL Soluiton}{16.91mgKetamine} = 2.09 mL[/tex]
Part 3The volume of this solution that a 59.0 kg user (body mass) would have to consume to become unconscious at 2.00 mg/kg is:
[tex]59.0 kgBM \times \frac{2.00mgKetamine}{1kgBM} \times \frac{1mL Soluiton}{16.91mgKetamine} = 6.98 mL[/tex]
If a user dissolves exactly 1 g of ketamine in 1/4 cup of water, the resulting concentration is 16.91 mg/mL. A 59.0 kg user would have to consume 2.09 mL of this solution to experience a high of 0.600 mg/kg. The same user would have to consume 6.98 mL of this solution to become unconscious at 2.00 mg/kg.Learn more about concentration units here: https://brainly.com/question/14594475
—————— —should be treated chemically before deposing it to rivers.
——Industrial waste——— should be treated chemically before deposing it to rivers.
=》The waste from factories & industries are highly acidic/base. This leads to the increase/decrease of the pH value of water in the rivers making it contaminated & unfit for drinking. This also causes a huge problem for aquatic organisms.
=》Industrial waste should be neutralized before depositing it into water bodies to reduce these risks.
_______
⚜ Hope it helps :))
Answer: Industrial waste
Explanation:
HELPP PLISS :(
Achemist analyzes two samples. One sample contains 14 g of element X and 6.0 g of element Y. The second sample contains 28 g of element X and 6.0 g of element Y. Does it appear that the two samples are the same substance? Explain the reasons for your answer.
A chemist analyzes two samples. One sample contains 14 g of element X and 6.0 g of element
11)
is the large-scale farming that mass-produces crops and livestock.
a) Organic farming
b) Industrial farming
c) Chemical farming
Answer:
b) Industrial farming
Explanation:
The term “industrial agriculture” refers to the type of farming which raises and cultivates large numbers of livestock and plants in high-density environments. It uses modern technology to promote faster growth and reduce illness and death rates in livestock, creating food products on a mass scale.
Answer: B.
Explanation
industrial agriculture
brainliest me
Hey :3 please help with this. Will mark brainlist if you’re right
Answer: 4
Explanation:
What do we call the repeating units of a larger molecule?
Answer:
Brainlest
Explanation:
A polymer is a molecule made up of repeating units. These units, called “monomers”, form a long molecular chain. It might have branches, or it might just be one straight line of molecules, each connected in the same way. A monomer of polyethylene
How many moles of NH3 can be produced from 5.50 moles of nitrogen in the following reaction: N2+3H2=2NH3
Answer:
Explanation:
Let the molar balance numbers be your guide.
N2 has a one in front of it.
2 NH3 has a two in front of it.
Nitrogen has 5.50 moles given.
1 / 5.50 = 2 / x Cross multiply
1 x = 2 * 5.50
x = 11.0
So if you use 5.5 moles of nitrogen, you get 11 moles of NH3
How many moles of O₂ would be required to generate 13.0 mol of NO₂ in the reaction below assuming the reaction has only 80.0% yield?
Answer:
Chemical reaction:
2 NO (g) + O₂ (g) → 2 NO₂ (g)2 moles of NO₂ is produced from O₂ moles = 1
Therefore, 2 moles of NO₂ is produced from O₂ moles = [tex]\dfrac{1}{2} \times 13 = \bf{6.5 mol}[/tex]
For 80 % yield no. of moles of O₂ = 6.5 mol
Then for 100% yield no. of moles of O₂ =[tex] \dfrac{6.5}{80\%} =\dfrac{6.5}{\frac{80}{100}} =\dfrac{6.5}{80} \times 100 = \dfrac{650}{80} = \bf 8.125\;mol [/tex]