An overhead projector lens is 32.0 cm from a slide (the object) and has a focal length of 30.1 cm. What is the magnification of the image? PLS HELP
Answer: 15.8
Explanation:
You are given that the
Object distance U = 32 cm
Focal length F = 30.1 cm
First calculate the image distance V by using the formula
1/F = 1/U + 1/V
Substitute F and V into the formula
1/30.1 = 1/32 + 1/V
1/V = 1/30.1 - 1/32
1/V = 0.00197259
Reciprocate both sides
V = 506.94 cm
Magnification M is the ratio of image distance to object distance.
M = V/U
substitute the values of V and U into the formula
M = 506.94/32
M = 15.8
Therefore, the magnification of the image is 15.8 or approximately 16.
Answer:
-15.8
Explanation:
the other 1 didnt take into account the negative.
A motorcycle is capable of accelerating at 1.5 m/s 2. Starting from rest how far can it travel in 0.5 seconds?
Answer:
use Newton's second law of motion
Explanation:
s= ut + ½at²
where u is initial velocity
s is distance covered
a is accerelation
t is time
s = 0×0.5 + ½×1.5+0.5²
=0.1875m
that's it .give me a brainliest if you don't mind
Answer:
0.1875 or 0.19 if you round
Explanation:
Δd = 1/2aΔt^2 +v1Δt
Δd = 1/2aΔt^2 + (0)Δt
Δd = 1/2(1.5)(0.5^2)
Δd = 0.1875m
Which answer best describes the scientific method?
A. An experiment that has no independent variables
o
B. Ten steps that are followed in a certain order
C. The basic categories for five processes that scientists use
D. The exact order of steps used in every experiment
SUBMIT
Answer:
D. The exact order of steps used in every experiment
Explanation:
since the scientific meathod is a process of exact steps used to create an experiment this would be the closest answer
Answer:
C. The basic categories for five processes that scientists use
20. Which of the following ray diagrams is correct?
Explanation:
The second one is the correct answer
The frequency of which type of electromagnetic wave is just higher than that of radio waves? Infrared rays Ultraviolet rays X-rays Microwaves Gamma rays
Answer: gamma rays
Explanation:
Please help me in this question!! There is NO picture fo this question! In a physics lab, 0.30 kg puck A, moving at 5.0 m/s [W], undergoes a collision with 0.40 kg puck B, which is initially at rest. Puck A moves off at 4.2 m/s [W 30° N]. Find the final velocity of puck B.
If you try opening a door by pushing too close to the side where the hinges are, you may find it difficult to push open. Suppose you are trying to open a door that is 75 cm wide. (Hint: To solve this one, remember the example problem in the lesson about the MA of the broom). a. If you push on the door at a point 15 cm away from the hinges, what is the mechanical advantage? b. What is the best mechanical advantage that you can obtain for any door that you simply push open? Your answer:
Answer:
a) Mechanical advantage is 0.2
b) maximum obtainable mechanical advantage is 1
Explanation:
The opening of the door is only possible when a force is used to push the door, by generating a torque on the door around the hinge.
Since the door is 75 cm wide, torque generated will be the product of the force applied and the width of the door.
torque = F x 75 = 75F
If the door was pushed at point on the door 15 cm from the hinges, the torque that will be generated will be
torque = F x 15 = 15F
a)The mechanical advantage MA is therefore
MA = 15/75 = 0.2
b) The best mechanical advantage that can be obtained from when you simply push it open is 1
From the case above, if we assume we push it at its maximum width from the hinge, then
MA = 75/75 = 1
Which statement describes a characteristic of a spiral galaxy?
O It is shaped like a pinwheel.
O It has no new star formation.
O It is made only of gases.
O It is smaller than other types of galaxies.
Answer:
It is shaped like a pinwheel
Explanation:
That's the shape.
The shape is like a pinwheel, which best describes a characteristic of a spiral galaxy. So option 1 is correct.
What is a Spiral Galaxy?The twisted clusters of stars and gas known as spiral galaxies, which are frequently formed of hot, young stars, have striking shapes. As opposed to the other two major groups of galaxy forms, elliptical and irregular, spiral galaxies make up the majority of the galaxies that astronomers have so far discovered.
A spiral galaxy is one that contains Earth and our solar system, such as the Milky Way.
Approximately 72% of the galaxies that have been spotted by scientists are spiral galaxies, according to a 2010 Hubble Space Telescope survey.
The arms that circle the galaxy are formed when the disc of stars orbiting the bulge divides. These spiral arms are rich in gas, dust, and newborn stars that shine brilliantly before dying suddenly.
Hence, the first option is correct that a spiral galaxy is shaped like a pinwheel.
To learn more about Spiral Galaxy :
https://brainly.com/question/13074009
#SPJ2
Solve the given parallel circuit by computing the desired quantities. I1 = amperes I2 = amperes I3 = amperes P1 = watts P2 = watts P3 = watts total current = amperes total power = watts
Answer:
1. Current 1 (I1) is 2 A.
2. Current 2 (I2) is 4 A.
3. Current 3 (I3) is 1.3 A.
4. Power 1 (P1) is 48 W.
5. Power 2 (P2) is 96W.
6. Power 3 (P3) is 31.2 W.
7. Total current is 7.3 A.
8. Total power is 175.2 W.
Explanation:
Data obtained from the question include the following:
Voltage (V) = 24 V
Resistance 1 (R1) = 12 Ω
Resistance 2 (R2) = 6 Ω
Resistance 3 (R3) = 18 Ω
1. Determination of the current 1 (I1)
Voltage (V) = 24 V
Resistance 1 (R1) = 12 Ω
Current 1 (I1) =..?
V = I1R1
24 = I1 x 12
Divide both side by 12
I1 = 24/12
I1 = 2 A
Therefore, the current 1 (I1) is 2 A
2. Determination of the current 2 (I2)
Voltage (V) = 24 V
Resistance 2 (R2) = 6 Ω
Current 2 (I2) =..?
V = I2R2
24 = I2 x 6
Divide both side by 6
I2 = 24/6
I2 = 4 A
Therefore, the current 2 (I2) is 4 A
3. Determination of the current 3 (I3)
Voltage (V) = 24 V
Resistance 3 (R3) = 18 Ω
Current 3 (I3) =..?
V = I3R3
24 = I3 x 18
Divide both side by 18
I3 = 24/18
I3 = 1.33 A
Therefore, the current 3 (I3) is 1.3 A.
4. Determination of power 1 (P1)
Voltage (V) = 24 V
Current 1 (I1) = 2 A
Power 1 (P1) =..?
P1 = I1V
P1 = 2 x 24
P1 = 48 W
Therefore, power 1 (P1) is 48 W.
5. Determination of power 2 (P2)
Voltage (V) = 24 V
Current 2 (I2) = 4 A
Power 2 (P2) =..?
P2 = I2V
P2 = 4 x 24
P2 = 96 W
Therefore, power 2 (P2) is 96W.
6. Determination of power 3 (P3)
Voltage (V) = 24 V
Current 3 (I3) = 1.3 A
Power 3 (P3) =..?
P3 = I3V
P3 = 1.3 x 24
P1 = 31.2 W
Therefore, power 3 (P3) is 31.2 W.
7. Determination of the total current
Current 1 (I1) = 2 A.
Current 2 (I2) = 4 A.
Current 3 (I3) = 1.3 A
Total current =.?
Total current = I1 + I2 + I3
Total current = 2 + 4 + 1.3
Total current = 7.3 A
Therefore, the total current is 7.3 A.
8. Determination of the total power.
Power 1 (P1) = 48 W.
Power 2 (P2) = 96W.
Power 3 (P3) = 31.2 W.
Total power =..?
Total power = P1 + P2 + P3
Total power = 48 + 96 + 31.2
Total power = 175.2 W
Therefore, the total power is 175.2 W.
A town is considering building a biodiesel power plant that would burn biomass to generate electricity. Which of the following correctly lists an advantage and a disadvantage of this project?
A) Advantage: it could help get rid of unwanted waste. Disadvantage: there is no way to use the electricity created.
B) Advantage: it reduces dependence on fossil fuels. Disadvantage: it would emit pollution into the air.
C) Advantage: it is a commonly used energy source. Disadvantage: building the plant would attract new people to the area.
D) Advantage: it would use energy from the sun and wind. Disadvantage: it is a non-renewable source of energy.
Answer:
A ' is the only choice that has a true advantage and a true disadvantage.
Explanation:
Which of the following elements are in this chemical reaction: Zn (s) + HCl (9) → ZnCl2 (s) + H2 ?
Multiple answers
Α. Η
B. CI
C. Zn
D. nCI
Answer:
A, B and C
Explanation:
You are given the chemical equation.
The chemical reaction:
Zn (s) + HCl (9) → ZnCl2 (s) + H2
The elements involved are
Zinc, hydrogen and Chlorine.
That is, H, Cl and Zn
The Zinc is in solid form
While hydrochloric acid is in aqueous form.
The correct answers are A ,B and C
In the demolition of an old building, a 1,300 kg wrecking ball hits the building at 1.07 m/s2. Calculate the amount of force at which the wrecking ball strikes the building. The wrecking ball strikes the building with a force of N.
Answer: F = 1391 N
Explanation:
The information given to you are:
Mass M = 1300 kg
Acceleration a = 1.07 m/s^2
The magnitude of the force striking the building will be
F = ma
Where
F = force
Substitute mass M and acceleration a into the formula
F = 1300 × 1.07
F = 1391 N
Therefore, the wrecking ball strikes the building with a force of 1391 N
What are the two reasons why metals are good conductors of electricity?
Answer:
Metals are excellent conductors because the atoms in a metal form a matrix through which their outer electrons can move freely.
Explanation:
Answer:
Explanation:
Metals are good conductor of electricity because they have very large number of free valance electrons whereas glass has no free electrons to conduct electricity. So metals good conductor whereas glass is a bad conductor of electricity.
plZ help !!
plz answer correctly!
will give the brainliest!!
Answer:
Explanation:
I-V graph always represent a straight line
An object moving north with an initial velocity of 14 m/s accelerates 5 m/s2 for 20 seconds. What is the final velocity of the object? 39 m/s 90 m/s 114 m/s 414 m/s
Answer:
Final velocity of the object(v) = 114 m/s
Explanation:
Given:
Initial velocity (u) = 14 m/s
Accelerates (a) = 5 m/s²
Time taken = 20 seconds
Find:
Final velocity of the object(v) = ?
Computation:
According to 1st law of motion.
⇒ v = u +at
⇒ v = 14 + (5)(20)
⇒ v = 14 + 100
⇒ v = 114 m/s
Final velocity of the object(v) = 114 m/s
Which of the following is an example of a primary source?
A. A dictionary definition of a science term
B. An article written by a scientist
C. A textbook written by a scientist
D. An encyclopedia entry about an experiment
Answer:
i think its no c.
a textbook written by a scientist. because its a first hand data.
An article written by a scientist is an example of a primary source. The correct option is option (B).
A primary source refers to an original, firsthand account or direct evidence of an event, topic, or research. It is created by individuals who directly participated in or witnessed the subject matter. An article written by a scientist would be considered a primary source as it typically presents the researcher's own observations, experiments, methodology, and conclusions.
It provides direct access to the original research and findings, making it an important source for scholarly and scientific purposes. In contrast, options A, C, and D are secondary sources that provide interpretations or summaries of information from primary sources.
Therefore, The correct option is an option (B).
To know more about the primary source:
https://brainly.com/question/24172115
#SPJ5
What is the wave speed of a wave that has a frequency of 100 Hz and a wavelength of 0.30 m? please no bad answers
Answer:
39 m/s
Explanation:
speed = frequency x wavelength (All SI Unit)
speed = 100 Hz x 0.30 m = 30 m/s
Sandra wants to know how many students are a part of the business department at her school. She has a list of 240
students' majors. She goes to her record and selects the column for the department and the column with the student
names. She clicks on the Total button and in the Student Name column selects
Average
Count
Maximum
Minimum
Answer:
Count
Explanation:
The count will show you how many students are apart of the business department
A 51-kg woman runs up a vertical flight of stairs in 5.0 s. Her net upward displacement is 5.0 m. Approximately, what average power did the woman exert while she was running?
Answer:
The average power the woman exerts is 0.5 kW
Explanation:
We note that power, P = The rate at which work is done = Work/Time
Work = Energy
The total work done is the potential energy gained which is the energy due to vertical displacement
Given that the vertical displacement = 5.0 m, we have
Total work done = Potential energy gained = Mass, m × Acceleration due to gravity, g × Vertical height, h
m = 51 kg
g = Constant = 9.81 m/s²
h = 5.0 m
Also, time, t = 5.0 s
Total work done = 51 kg × 9.81 m/s²× 5 m = 2501.55 kg·m²/s² = 2501.55 J
P = 2501.55 J/(5 s) = 500.31 J/s = 500.31 W ≈ 500 W = 0.5 kW.
48:09 Which best describes the first law of thermodynamics as compared to the second law of thermodynamics? The first law describes how thermal energy is conserved but not the direction it moves. The first law describes the direction thermal energy moves but not how it is conserved. The first law describes how thermal energy can be created but not how it can be destroyed. The first law describes how thermal energy can be destroyed but not how it can be created.
Answer:
A). The first law describes how thermal energy is conserved but not the direction it moves.
Explanation:
Thermodynamics is demonstrated as the branch of physics that deals with the associations or relationships between heat and other energy forms like mechanical, chemical, and electrical).
As per the question, the first law discusses that heat is a kind or form of energy and thus, processes associated with thermodynamics are subject to energy conservation principle. Therefore, heat energy can neither be destroyed nor created but rather transferred to one place to another and converted to and from other energy forms.
Thus, the first law of thermodynamics is distinct from the second law as 'the former describes how thermal energy can be conserved to and from other forms of energy and not the direction in which it moves' while the second law focuses on entropy. Therefore, option A is the correct answer.
The first law of thermodynamics describes the conservation of heat energy but not the direction it moves. Option A correct.
First law of Thermodynamics:
It states that the energy cannot be produced or destroyed it just change from one form to another.
Heat is a form of energy and thus, follow the energy conservation principle. So, heat can be change into mechanical energy.
The second law describe the direction of movement of heat.
Therefore, option A is the correct answer.
To know more about First law of Thermodynamics:
https://brainly.com/question/7107028
Would you have been a Federalist or an Anti-Federalist? Why?
Answer:
Explanation:
I would have been an anti-federalist. They favored a weak central government because they related it to the British tyranny. Federalists believed in a strong central government, almost controlling. I would not have respected this type of government.
Which option describes a phase change
Answer:
b. Gasloine evaporating into the air
I tryed to answer
hello:) I don’t really understand this graph. I thought uniform acceleration means the velocity is constant so it’s a constant gradient?
Answer:
Uniform acceleration means that the object is accelerating at a constant rate. Since there is still acceleration, velocity is not constant. In fact, the velocity is increasing. This means that the object is moving faster and faster at a constant rate.
This graph is a displacement-time graph so its gradient would represent the velocity of the object. The velocity increases hence the gradient should increase (which means that the graph must be steeper and steeper with increasing time).
Constant gradient of a displacement-time graph would mean that there is no acceleration since gradient of the graph does not change so velocity is constant.
Note that it is the rate of change of velocity that is constant during uniform acceleration, not velocity.
A metallic rod has a length 1.5m and a diameter 0.2 cm. The rod carries a current of 5A
when a p.d of 75V is applied between its ends.
(a) Find the current density in the rod.
(b) Calculate the magnitude of the electric field applied to the rod.
(c) Calculate the resistivity and conductivity of the material of the rod.
Answer:
Explanation:
Current density J = i / A where i is current and A is cross sectional area
J = 5 / π x ( .1 x 10⁻² )²
= 1.6 x 10⁶ A / m²
b )
electric field applied E = V / l where V is potential difference and l is lemgth of rod
E = 75 / 1.5
= 50 v / m
c )
J = σ E
J is current density , σ is conductivity and E is electric field .
1.6 x 10⁶ = σ x 50
σ = 3.2 x 10⁴ Ω⁻¹ m⁻¹
Resistivity = 1 / σ
= 1 / 3.2 x 10⁴
= .3125 x 10⁻⁴
=3.125 x 10⁻⁵ Ω m
Ethan made a diagram to compare examples of the first and second laws of thermodynamics. What belongs in the areas marked X and Y?
X: The internal energy of a piston system increases
as heat is added and rises to a cool area
Y: As thermal energy is added to a container, some
of the energy is lost to the environment
X: As thermal energy is added to a container, some
of the energy is lost to the environment
Y: The internal energy of a piston system increases
as heat is added and rises to a cool area
X: A cold spoon placed in hot liquid gets warmer
Y: Thermal energy is converted to light energy
X: Thermal energy is converted to light energy
Y: A cold spoon placed in hot liquid gets warmer
Answer:
D: X: Thermal energy is converted to light energy
Y: A cold spoon placed in hot liquid gets warmer
Explanation:
j took the quiz
The first and second laws of thermodynamics are used to describe the process of heat transfer.
What are the laws of thermodynamics?The laws of thermodynamics are laws that show the transfer of heat energy there are three laws of thermodynamics that guide heat transfer.
From the statements of the first and second laws of thermodynamics, the statements that fit into the circles are;
X: Thermal energy is converted to light energy
Y: A cold spoon placed in hot liquid gets warmer
Learn more about the laws of thermodynamics:https://brainly.com/question/3808473
#SPJ6
A lens is used to make an image of magnification -1.50. The image is 30.0 cm from the lens. What is the object’s distance (unit=cm)?
Answer: Object distance is : 20cm
Explanation:
Given the following :
Magnification (m) = - 1.50
Image Distance from lens (v) = 30cm
Calculate the object distance (u) :
Recall:
Magnification = - [image distance (v) / object distance (u)]
Therefore, Inputting our values :
-1.50 = - (30 / u)
1.50 * u = 30
u = 30 / 1.50
u = 20 cm
Answer:
20 cm
Explanation:
acellus
15. The above figure shows the path of a ray of light falling on the mirror(s) represented by a box. Which of the following arrangements of mirrors will produce light rays in the path shown above?
Answer: A
Explanation:
From the figure given as attachments, the error pointing upward signifies the incident ray while the one point downwards signifies the reflected ray.
One of the laws of reflection is stated that the angle of incidence is equal to the angle of reflection.
Since the two arrows are parallel to each other, then the mirror must be perpendicular to the two arrows. That is, the incident ray and the reflected ray must be perpendicular to the mirror.
Option A is the correct answer.
Answer: answer is NOT A, ITS B!
Explanation:
ik
Which point is labeled in the scatterplot below?
Which explains the operation of a hydraulic lift system? A. Archimedes' principle B. Pascal's principle C. Newton's principle D. Bernoulli's principle
Answer: B. Pascal's principle
This is the idea where you compress a liquid on one end of a tube (more or less), and the liquid's pressure is transmitted to the other end to help lift a heavy object. Often the compressing force is downward to take advantage of gravity.
Part 1: Research hurricane trends for the time periods 1995-2004 and 2005-2014. Use your research to answer the following questions.
A. What was the average number of tropical storms per season for the time period 1995-2004?
B. What was the average number of hurricanes per season for the time period 1995-2004?
Answer:
A. 1.3 per season
B. 0.77 per season
Explanation:
In the organisation's website, the National Oceanic and Atmospheric Administration, NOAA, in 2004 stated that, since 1995, there has been an increase (above average) in the Atlantic ocean's tropical clone activity corresponding to the multi-decadal oscillation's active phase
That since 1995 there has been 13 tropical storm and 7.7 hurricanes
Therefore;
Since the number of years between 1995 and 2004 = 10 Years, we have;
A, The average number of tropical storm per, season = 13/10 = 1.3 per season
B. The average number of hurricane, per season = 7.7/10 = 0.77 per season.