Why wasn’t sodium hydroxide used in the synthesis of divanillyl oxalate, instead of triethylamine?

Answer:

green house gas

Explanation:

Thermohaline circulation that occur in the ocean part that flows across sea surface help to supply heat to polar regions.

The thermohaline circulation refer to a section and region of the ocean circulation which is majorly driven by heat gradient and freshwater that flows across the sea surface and also from the mixture of heat and salt that occur at the inside part of the ocean.

Therefore, Thermohaline circulation help to supply heat to polar regions.

Learn more about thermohaline circulation here.

https://brainly.com/question/1176119

The element which is likely to have a high thermal conductivity among given options is sodium.

Thermal conductivity of any substance is define as the capability of the substance to carry heat or transfer of heat.

As we know that metals are the good conductors of heat and non-metals are bad conductors, so we exclude carbon, antimony and chlorine atom from this group as they are non-metals. And sodium atom has the thermal capability.

Hence option (4) is correct.

To know more about thermal conductivity, visit the below link:
https://brainly.com/question/11213835

Answer: Option (4) is correct

Explanation:

6 important factors that affect evaporation are : 1. Wind assists evaporation; for example in clothes dry faster under a fan. 2. Heat assists evaporation; for example, in summer clothes dry faster than in winter.

Now have a free meme

The mass of  potassium chlorate, KClO₃ needed to produce 30 grams of potassium chloride, KCl is 49.33 grams

2KClO₃ —> 2KCl + 3O₂

Molar mass of KClO₃ = 39 + 35.5 + (16×3) = 122.5 g/mol

Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g

Molar mass of Kcl= 39 + 35.5 = 74.5 g/mol

Mass of KCl from the balanced equation = 2 × 74.5 = 149 g

SUMMARY

From the balanced equation above,

149 g of KCl were obtained from 245 g of KClO₃

From the balanced equation above,

149 g of KCl were obtained from 245 g of KClO₃

Therefore,

30 g of KCl will be obtained from = (30 × 245) / 149 = 49.33 g of KClO₃

Thus, 49.33 g of KClO₃ are needed for the reaction

Learn more about stoichiometry:

https://brainly.com/question/14735801

The fruit which has the greater mass is peach i.e. 150 grams.

Mass is a quantity which is used to define that what amount of substance will occupy any space or present in the given object.

We have given,

Weight of apples = 85,000 mg

Weight of peach = 0.15 kg

To compare the quantity first we have to convert both of these units in the same unit, and we know that:

In 1 kilogram = 1000 grams

And in 1 grams = 1000 milligrams

So, we convert both the units into grams as:

85,000 mg =  85,000 / 1000 = 85 grams

0.15 kg = 150 grams

So, the mass of peach is high.

Hence, peach has the greater mass.

To know more about mass, visit the below link:

https://brainly.com/question/15526412

Answer:

Constance has an apple that weighs 85,000 milligrams and a peach that weighs 0.15 kilograms. Which fruit has the greater mass? Choose the words and numbers to complete the statements.

Convert the masses of both fruits to the same unit.

85,000 milligrams is the same as  

85

 grams.

0.15 kilograms is the same as  

150

 grams.

The  

peach

 has the greater mass.tion:

Answer:

I don't see a specific question, so I'll make a few comments and hope that answers the reason for the post.

Explanation:

Zinc(Zn) does react with iron chloride, since zinc is a more reactive metal than the iron.

When Zn is introduced to an iron (III) chloride solution, the Zn disoplaces the Fe atom in a displacement reaction.

The chemical equation of the reaction:

Zn + Fe(III)Cl3 → ZnCl3 + Fe

Energy is often realeased in this type of reaction, since the resulting chemical products have a lower energy that the reactants.

There are several metals more reactive than iron.  One of the more interesting examples of a highly exothermic reaction with iron chloride (rust) is the reaction of aluminum with iron chloride.  `This is highly exothermic and is labelled a thermite reaction.  It provides a spectacular flame that is not enough to weld railroad tracks together.

For the ionization constant for acetic acid is 1.8 x 10-5; that for hydrocyanic acid is 4 x 10-10, The solution is basic due to the generation of OH– ions.

ionization constant is simply defined as a constant that relies on the equilibrium that exists b/w ions and molecules of solution.

Generally, the equation for the Chemical reaction  is mathematically given as

CH3C.O .O + H2_O ----> CH3COOH + O.H

Therefore

the anion C...N–  receives H+ ion from water as it goes through hydrolysis.

Hence

xN– + H2..O ----><---- HxN + O..H–

In conclusion, The solution is basic due to the generation of OH– ions.

Read more about Chemical reaction

https://brainly.com/question/16416932

Answer: 0.5 M

Explanation:

molarity is defined as [tex]\frac{mol}{L}[/tex]

in the question, we are already given the amount of moles of Ba+ and L of water. we can just plug it into the equation, [tex]\frac{1}{2}[/tex].

thus, the molarity will be 0.5 M

hope this helped! ♡

Based on the data given, the energy required to remove an electron from a hydrogen atom in the n = 11 state is -0.112 eV

Ionization energy is the energy requiredto remove an electron from a neutral atom or a cation in its gaseous state.

To calculate the energy required to remove the electron from a hydrogen atom in the n = 11 state, the formula below is used:

where

[tex]E_0 \: is \: ground \: state \: energy \: of \: hydrogen \: atom \: = -13.6 eV \\ [/tex]

substituting the values:

[tex]E_n = \frac{ - 13.6 × 1^{2}}{11^{2}} \: = - 0.112 \: eV[/tex]

Therefore, the energy required to remove an electron from a hydrogen atom in the n = 11 state is -0.112 eV

Learn more about ionization energy at: https://brainly.com/question/1445179

Burette is the lab equipment used to estimate the volume of liquid during titration. The volume is measured by the bottom meniscus to the nearest 0.01 mL.

Burette is an instrument used in quantitative analysis like the volume of the sample in the titration methods and is made of a glass tube.

In the volumetric analysis, the final volume of the liquid is measured by locating the lower meniscus and is taken approximately near 0.01 ml as the burettes have markings of 0.1 mL.

Therefore, option a. locate the bottom meniscus and mark nearest to 0.01 mL.

Learn more about meniscus here:

https://brainly.com/question/4070509

neutral particles since they do not posses any charge

Based on the data provided from the experiment using the calorimeter, the heat absorbed by water is 188.1 Joules

A calorimeter is an equipment used in the laboratory to enthalpy change of a reaction.

A calorimeter is insulated to ensure no heat losses or gain from the surroundings.

To determine the Joules of heat absorbed by water, the formula below is used:

Specific heat capacity of water = 4.18 J/g.°C

Heat absorbed by water = 15 × 4.18 × (55 - 25)

Heat absorbed by water = 188.1 Joules

Therefore, the heat absorbed by water is 188.1 Joules.

Learn more about calorimeter at: https://brainly.com/question/556855

Answer:

the cycle of water and how it evaporates with energy from the sun and the droplets are stored in clouds which is condensation and when it rains or snows those are forms of precipitation

Explanation:

Answer:

it shows the continuous movement of water within the earth and atmosphere

The molecular formula for a compound with a percent composition of 38.7% C, 9.76% H, 51.5% O, and a molar mass of 62.0 g/mol is C₂H₆O₂.

A molecular formula is a chemical formula indicating the kinds and number of atoms of each kind in a molecule of a compound.

To determine the molecular formula, we need to follow a series of steps.

C: 38.7/12.01 = 3.22

H: 9.76/1.01 = 9.66

O: 51.5/16.00 = 3.22

C: 3.22/3.22 = 1

H: 9.76/3.22 = 3

O: 3.22/3.22 = 1

The empirical formula is CH₃O and its molar mass is 31.04 g/mol.

First, we will calculate how many times the empirical formula is contained in the molecular formula by dividing their molar masses.

n = (62.0 g/mol) / (31.04 g/mol) = 2

The molecular formula is 2 times the empirical formula, that is, C₂H₆O₂.

The molecular formula for a compound with a percent composition of 38.7% C, 9.76% H, 51.5% O, and a molar mass of 62.0 g/mol is C₂H₆O₂.

Learn more about molecular formulas here: https://brainly.com/question/26388921

they can survive without oxygen, this is bio btw :)

A. Cold front

The warm front symbol would be red and have circles instead of triangles.

The occluded front symbol would be purple with both, a triangle and a circle.

The stationary Front symbol is a mixture of both symbols from cold front and warm front.

hope that helps!!

Answer:

Atomic weight and valence electrons

Explanation:

These variables allow Mendeleev to place each element in a certain row and column. The table comprises 7 rows and 18 columns.

We can confirm that the energy is being used for a biological process to remove waste known as excretion.

In biology, excretion is a metabolic process in which organisms discard waste and other by-products of metabolism. This process is essential for organisms to maintain homeostasis.

Therefore, we can confirm that energy is being used for a biological process to remove waste known as excretion.

To learn more about homeostasis visit:

https://brainly.com/question/9087319?referrer=searchResults

Answer:

mf i was trying to

find out the same thing

Explanation:

Answer:

Well, by definition,

molarity = moles of solute

               volume of solution

Explanation:

Now the moles of solute are a constant. The volume of solution MAY change substantially with increasing or decreasing temperature. In some calculations molality is used in preference, which is defined by the quotien

Hope this helps!

Answer:

8

Explanation:

2MgSO4

We see there are 4 atoms, but these are multiplied by 2, therefore 8 atoms of oxygen.

Answer:

it is 4.

Explanation:

four atoms of oxygen (O)

four atoms of silicon (Si)

two atoms of magnesium (Mg)

two atoms of oxygen (O)

Answer:

The one 100 meters below the surface of the water.

Explanation:

As you go deeper into a body of water, there is more water above, and therefore a greater weight pushing you down.

An electric motor works by converting electrical energy to mechanical energy in order to create motion.

For example,Force is generated within the motor through the interaction between a magnetic field and winding alternating (AC) or direct (DC) current.

This works because…

Answer : When an electric current flows through the wire in the electromagnet, a magnetic field is produced in the coil.

[tex]\:\mathsf{Hope\:this\:helps\:you!}[/tex]

Answer:

when an electric current flows through the wire in the electromagnet , a magnetic field is produced in the coil .

Explanation:

After the dillution of the solution, the wavelength of maximum absorption is decreased.

The wavelength of maximum absorption is the wavelength at which the solution absorbs the maximum amount of light. It is usually shown as a hump in the spectrum.

When the starting concentration of the  K2Cr2O7 is diluted, the wavelength of maxium absorption decreases.

Learn more about maximum absorption: https://brainly.com/question/26610701

Answer:

Zone A

Explanation:

Because, when facing the sun, the "A" zones would be furthest from the sun, they get the least amount of sunlight (also shows why they are the coldest parts).

Answer:

they include pretty aurora as well as hazards