will 1cm,3cm,1m make a tri

The expression of the linear equation is f(x) = 1200 - 5x

From the question, we have the following parameters that can be used in our computation:

Initial = 1200 gallons

Rate= 5 gallins per day

using the above as a guide, we have the following:

f(x) = Initial - Rate * x

substitute the known values in the above equation, so, we have the following representation

f(x) = 1200 - 5x

Hence, the function is f(x) = 1200 - 5x where x is the number of days

Read more about linear relation at

https://brainly.com/question/30318449

#SPJ1

Solving a linaer equation we can see that your cat weighs two more pounds.

Let's define the variables:

x = your cat's weight.

y = your friend cat's weight.

We can write the linear equation:

y = 0.833...*x

And we also know that.

y = 10 lb, replacing that we will get:

10lb =  0.833...*x

Solving that for x:

x = 10lb/  0.833...

x = 12 lb

Then you can see that your cat weighs 2 pounds more.

Learn moer about linear equations at:

https://brainly.com/question/1884491

#SPJ1

Based on the function properties, the linear equation that will pass through the origin is w = 10v

From the question, we have the following parameters that can be used in our computation:

w and v are integers

As a general rule;

A linear equation that passes through the origin has the form y = mx

Where m is the slope

Using the variables w and v, we have

w = mv

Set m = 10 or any integer value

So, we have

w = 10v

Hence, the equation of the linear function is w = 10v

Read more about linear relation at

https://brainly.com/question/30318449

#SPJ1

Using subtraction, we get 2723237 in base 7 as the answer.

To convert 65210 to base 7 using subtraction, we can follow these steps:

1. Start with the largest power of 7 that is less than or equal to 65210. In this case, that is 7^4 = 2401.

2. Divide 65210 by 2401 to get the quotient and remainder:

  65210 ÷ 2401 = 27 with a remainder of 1363

3. Write down the quotient (27) and use the remainder (1363) to repeat steps 1-2 until the remainder is 0:

  1363 ÷ 343 = 3 with a remainder of 112

  112 ÷ 49 = 2 with a remainder of 14

  14 ÷ 7 = 2 with a remainder of 0

4. Write down the remainders in reverse order to get the base 7 equivalent of 65210:

  65210 = 2723237 in base 7.

Learn more about subtraction here:

https://brainly.com/question/20113814

#SPJ11

The solution to each system of equations is shown in the graphs attached below.

When the equations of a system is plotted on a graph, the solution is the coordinates of the point where both lines intersect each other.

1. The system, 4x - y = 3 and 3x + y = 4 is graphed in figure one. They intersect at (1, 1), which is the solution.

2. The system, 5x + 2y = 4 and 3x + 6y = -12 is graphed in figure 2. They intersect at (2, -3), which is the solution.

3. The solution to the system 2x + y = 1 and x - 2y = 18 is graphed in figure 3 which is (4, -7).

Learn more about the system of equations on:

https://brainly.com/question/25976025

#SPJ1

a. In total 1820  many different jury selections are possible

b. The probability that a majority of the jury members will be men if the choice is made randomly is 0.172. 

a. The number of diverse jury determinations conceivable can be found utilizing combinations:

The number of distinctive jury choices = (Add up to the number of combinations of 12 individuals from 16) = 16C12 = (16!/(12!4!)) = 1820.

In this manner, there are 1820 distinctive jury choices conceivable.

b. Let X be the number of men chosen within the jury.

Since each choice is autonomous and the likelihood of selecting a man is rise to the likelihood of selecting a lady, X takes after a binomial dispersion with parameters n=12 and p=0.5.

The likelihood that a lion's share of the jury individuals will be men is the entirety of the probabilities of selecting 7, 8, 9, 10, 11, or 12 men:

P(X>=7) = P(X=7) + P(X=8) + P(X=9) + P(X=10) + P(X=11) + P(X=12)

Utilizing the binomial likelihood equation, we will discover each of these probabilities:

P(X=k) = (12 select k) * [tex]0.5^12[/tex]

Hence,

P(X>=7) = [(12 select 7) + (12 select 8) + (12 select 9) + (12 select 10) + (12 select 11) + (12 select 12)] * [tex]0.5^12[/tex]

Employing a calculator, we are able to assess this expression to induce:

P(X>=7) = 0.171875

Hence, on the off chance that the choice is made arbitrarily, the likelihood that a larger part of the jury individuals will be men is around 0.172. 

To know more about probability refer to this :

https://brainly.com/question/24756209

#SPJ4

The discriminant of a quadratic equation is the expression b^2 - 4ac, where a, b, and c are the coefficients of the quadratic equation ax^2 + bx + c.

To determine whether each quadratic equation has two real solutions, a double root, or no real solution, we need to look at the value of the discriminant.

For the equation 2a^2 + 3a + 1 = 0, the discriminant is b^2 - 4ac = 3^2 - 4(2)(1) = 1. Since the discriminant is positive and not equal to zero, there are two real solutions.

For equation 2a(a – 3) – 3 = 3, we need to rearrange it into standard form first, which gives us 2a^2 - 6a - 6 = 0. The discriminant is b^2 - 4ac = (-6)^2 - 4(2)(-6) = 60. Since the discriminant is positive, there are two real solutions.

For the equation 3a^2 – 2a(a – 2)^2 – 4 = 0, we need to expand the squared term first, which gives us 3a^2 - 2a(a^2 - 4a + 4) - 4 = 0. Simplifying this equation gives us 3a^2 - 2a^3 + 8a - 4 = 0. The discriminant is b^2 - 4ac = 8^2 - 4(3)(-2) = 100. Since the discriminant is positive, there are two real solutions.

Therefore, all three quadratic equations have two real solutions.

Learn more about quadratic here:

https://brainly.com/question/22364785

#SPJ11

The graphed function is the one in option D.

[tex]F(x) = \frac{1}{(x + 3)*(x - 2)}[/tex]

We can see two vertical asymptotes in our graph, these ones appear at the values:

x = -3

x = 2

So we must have a denominator that becomes zero in these values, this is something like:

(x + 3)*(x - 2)

Then the correct option is D, where the function has a denominator exactly like the one written above.

Learn more about vertical asymptotes at:

https://brainly.com/question/4138300

#SPJ1

Answer: 6

Step-by-step explanation:

This is what I think

z=6

6/12=8/16 which is a true proportion.     z=6   the other side 14-6=8

A 90% confidence interval for the proportion of adults who are worried about having enough money for retirement is (0.5031, 0.5396).

To construct a 90% confidence interval for the proportion of adults who are worried about having enough money for retirement, follow these steps:

1. Determine the sample proportion (p- hat):
p- hat = number of adults worried / total number surveyed
p- hat = 569 / 1094
p- hat ≈ 0.5199

2. Determine the confidence level (90%) and find the corresponding z-score using a z-table or calculator. For a 90% confidence interval, the z-score is approximately 1.645.

3. Calculate the standard error (SE):
SE = sqrt((p- hat * (1 - p- hat)) / n)
SE = sqrt((0.5199 * (1 - 0.5199)) / 1094)
SE ≈ 0.0156

4. Construct the confidence interval using the sample proportion, z-score, and standard error:
Lower limit: p- hat - (z-score * SE)
Lower limit: 0.5199 - (1.645 * 0.0156)
Lower limit ≈ 0.4938

Upper limit: p- hat + (z-score * SE)
Upper limit: 0.5199 + (1.645 * 0.0156)
Upper limit ≈ 0.5460

A 90% confidence interval for the proportion of adults who are worried about having enough money for retirement is (0.4938, 0.5460).

Learn more about confidence intervals:

brainly.com/question/24131141

#SPJ11

The y-axis represents the concentration of pollutants in the given unit, either parts per million or parts per billion, depending on the specific graph.

It does not show time of day, as this would typically be represented on the x-axis. However, in some cases, the y-axis may display the concentration of pollutants as percentages, indicating the proportion of the pollutant in relation to other components of the sample. Overall, the y-axis is an essential component of a pollution graph, as it provides critical information about the extent and severity of pollutants in a given environment.

The y-axis in this context shows the concentration of pollutants. It can be presented in different units, such as parts per million (ppm) or parts per billion (ppb). Additionally, it can also be expressed as percentages, which represent the proportion of pollutants in the total volume. To interpret the y-axis, locate the data point on the graph and read the corresponding value on the y-axis. This will indicate the concentration of pollutants present at that specific point. Remember to pay attention to the unit of measurement used to ensure an accurate understanding of the data.

Learn more about percentage at: brainly.com/question/29306119

#SPJ11

Answer: If the farmer orders 1/5 ton of hay for the horses and the cows, and the horses and the cows are each given the same amount, then we need to divide 1/5 by 2 to get the amount of hay each animal is given.

1/5 ÷ 2 = 1/10

Therefore, the horses and the cows are each given 1/10 of a ton of hay.

Step-by-step explanation:

For k ≠ 1, the system has a unique solution, and for k = 1, the system has no solution. There is no value of k for which the system has infinitely many solutions.

To determine the value(s) of k for which the system has no solution, a unique solution, or infinitely many solutions, we will analyze the given system of linear equations:
1) kx + 2y = 4
2) 2x - 4y = -8
Step 1: Simplify the second equation:
Divide both sides of equation 2 by 2:
x - 2y = -4
Step 2: Compare the equations:
Now the system looks like this:
1) kx + 2y = 4
2) x - 2y = -4
Step 3: Determine the relationship between the equations:
a) If k ≠ 1, the equations represent two different lines, which will have a unique solution (intersection point).
b) If k = 1, the equations are multiples of each other:
1x + 2y = 4
1x - 2y = -4
In this case, the lines are parallel and never intersect, which means the system has no solution.
c) There is no value of k for which the system has infinitely many solutions since the given equations cannot represent the same line.
So, the answer is: For k ≠ 1, the system has a unique solution, and for k = 1, the system has no solution. There is no value of k for which the system has infinitely many solutions.

To learn more about the unique solution, refer:-

https://brainly.com/question/29260601

#SPJ11

The scatter plot that would have a correlation of r = 0 would be such that there would no linear relationship between the values.

If a correlation coefficient r=0 is assigned to a scatter plot, it denotes that no linear connection persists amongst the variables presented.

Placing 5 points within the graph without leading to any linear pattern ensures a neutral trend- one that isn't affirmative or negative of sorts. Below is an exemplification of the previously outlined attributes:

(1,2)

(2,4)

(3,3)

(4,1)

(5,5)

An example of a scatter plot with zero correlation is shown attached.

Find out more on scatter plots at https://brainly.com/question/29366075

#SPJ1

Answer:

10.27cm²

11.33cm²

Step-by-step explanation:

10. Area of the rectangle below = l×w =3×6=18

are of that triangle at top- 6 whole 1cm square +6 half shares which are =3 whole squares so 6cm +3cm = 9cm

Total figure Area = 18+9=27cm²

11.30 whole squares + 6 half squares = 3 whole squares

Total = 30cm+3cm = 33cm²

To begin, let's write out the parametric equations for the curve in question. the independent variable "t":

x = t^2 - 3
y = t^3 - 6t

To find where the tangent is horizontal, we need to find where the slope of the tangent line (which is given by dy/dx) is equal to zero. However, we can't just take the derivative of y with respect to x, since x and y are both functions of t. Instead, we need to use the chain rule and differentiate y and x with respect to t:

dx/dt = 2t
dy/dt = 3t^2 - 6

Now, we can use the formula dy/dx = (dy/dt) / (dx/dt) to find the slope of the tangent:

dy/dx = (dy/dt) / (dx/dt) = (3t^2 - 6) / (2t)

To find where the tangent is horizontal, we need to set this expression equal to zero and solve for t:

(3t^2 - 6) / (2t) = 0

3t^2 - 6 = 0

t^2 = 2

t = +/- sqrt(2)

So there are two points on the curve where the tangent is horizontal, one where t = sqrt(2) and one where t = -sqrt(2). To find the corresponding points on the curve, we can plug these values of t into the parametric equations:

When t = sqrt(2):
x = (sqrt(2))^2 - 3 = -1
y = (sqrt(2))^3 - 6(sqrt(2)) = -2sqrt(2)

So the point on the curve where the tangent is horizontal and x = -1 is (-1, -2sqrt(2)).

When t = -sqrt(2):
x = (-sqrt(2))^2 - 3 = -5
y = (-sqrt(2))^3 - 6(-sqrt(2)) = 2sqrt(2)

So the point on the curve where the tangent is horizontal and x = -5 is (-5, 2sqrt(2)).

B)

Now let's find where the tangent is vertical. To do this, we need to find where dx/dt (the rate of change of x with respect to t) is equal to zero.

dx/dt = 2t

2t = 0

t = 0

So the tangent is vertical when t = 0. To find the corresponding point on the curve, we can plug t = 0 into the parametric equations:

x = 0^2 - 3 = -3
y = 0^3 - 6(0) = 0

So the point on the curve where the tangent is vertical is (-3, 0).

Learn more about tangents here:

https://brainly.com/question/19064965

#SPJ11

The statement "In Probability we know the Entire System we are dealing with" is false. Probability theory can be applied to both well-defined systems and complex scenarios with incomplete information. In the latter case, probability estimation may be less precise and more reliant on assumptions and approximations.

In probability, it is not always true that we know the entire system we are dealing with. Probability is a mathematical concept that quantifies the likelihood of an event occurring. It is expressed as a number between 0 and 1, with 0 representing impossibility and 1 representing certainty. In some cases, we may have complete information about the system and can determine the probability of an event precisely. This is often the case in well-defined situations, such as flipping a coin or rolling a fair die. In these instances, we can calculate the probability based on our knowledge of the system and the possible outcomes. However, in many real-world scenarios, we may not have complete information about the system, making it difficult to determine the probability of an event accurately. For example, predicting the weather or forecasting stock market fluctuations involves numerous variables and uncertainties that make it challenging to establish an accurate probability. In these situations, we often rely on historical data, statistical models, and expert opinions to estimate probabilities. While these methods can provide useful insights, they are still subject to uncertainties and limitations.

Learn more about probability theory here:

https://brainly.com/question/31469353

#SPJ11

The equation of the new function will be: y = 2x + 5

The equation for a linear function with a slope of m and y-intercept of b is represented as y = mx + b.

We are Given a linear function graph passes the points (-0.5, 0) and (0, 1):

Y-intercept (b) = 1 (value of y when x = 0)

Thus Slope (m) = change in y/change in x = (1 - 0)/(0 - (-0.5)) = 2

If the slope (1) is multiplied by 2, the new slope would be: 2

If the y-intercept is increased by 3 units, the new y-intercept will be: 5

The equation of the new function will be: y = 2x + 5

Learn more about linear function on:

brainly.com/question/4025726

#SPJ1

The sample mean for the given sample data is 11.0.(rounded to one decimal place). The mean of the sample means is the average of all sample means taken from the population. It is an estimate of the population mean. The sample mean is calculated by taking the sum of all values in the sample and dividing it by the sample size.

Step 1: Calculate the sample mean for the given sample data. Round your answer to one decimal place.
To calculate the sample mean, follow these steps:
1. Add up the net changes in scores for all the students: 6 + 14 + 12 + 23 + 0 = 55
2. Divide the sum by the number of students (n=5): 55 ÷ 5 = 11
The sample mean for the net change in students' scores is 11.0 (rounded to one decimal place).

Learn more about sample mean here: brainly.com/question/15662511

#SPJ11

About 50 meters are the approximate circumference of the cylindrical storage tank. By multiplying the circumference of 157 meters by (pi), this is achieved.

The formula for a circle's circumference (C) is as follows:

C = πd

where d is the circle's diameter and (pi) is a mathematical constant roughly equivalent to 3.14.

In this instance, we are informed that the tank has a 157-meter circumference. In order to find the diameter, we can apply the following formula:

C = πd

157 = πd

We can divide both sides by d to find the answer to d:

d = 157/π

When we use a calculator, we obtain:

d ≈ 50

The cylindrical storage tank has a diameter of roughly 50 meters as a result.

Learn more about diameter:

https://brainly.com/question/5501950

#SPJ4

The 95% confidence interval for the average number of units that students in the college are enrolled in is approximately (11.98, 13.02) units.

To calculate the 95% confidence interval for the average number of units that students in the college are enrolled in, you can use the following formula:

CI = mean ± (critical value * standard deviation / √sample size)

In this case, the mean is 12.5 units, the sample standard deviation is 1.8 units, and the sample size is 46 students. For a 95% confidence interval, the critical value (z-score) is approximately 1.96.

CI = 12.5 ± (1.96 * 1.8 / √46)

Now, plug in the values and calculate the confidence interval:

CI = 12.5 ± (1.96 * 1.8 / 6.782)

CI = 12.5 ± (3.528 / 6.782)

CI = 12.5 ± 0.52

Find out more about confidence interval

brainly.com/question/29340832

#SPJ11

The solution to the inequality x/3 ≤ -6 is x ≤ -18. This means that any value of x that is less than or equal to -18 will satisfy the inequality.

To solve the inequality x/3 ≤ -6, we can start by multiplying both sides by 3, since the inequality sign does not change direction when we multiply or divide by a positive number:

x/3 ≤ -6

3 * (x/3) ≤ 3 * (-6)

x ≤ -18

Therefore, the solution to the inequality x/3 ≤ -6 is x ≤ -18. This means that any value of x that is less than or equal to -18 will satisfy the inequality.

Learn more about Inequality here:
https://brainly.com/question/20383699

#SPJ1

According to the information that best represents the data is: y = -0.2143x^2 + 3.6429x + 1.5714

To calculate during what month is the demand at a minimum we have to analizar la información del gráfico. En este caso podemos inferir que the minimum demand occurs during month 3 when y = 1.

Adicionalmente, the points do not appear to lie on a straight line, so a linear function may not be the best fit. Instead, we could try a quadratic function of the form y = ax^2 + bx + c. Using a curve fitting tool or solving a system of equations using the data, we can find the coefficients of the function that best fit the data.

Solving the system of equations:

a + b + c = 5

4a + 2b + c = 2

9a + 3b + c = 1

16a + 4b + c = 2

25a + 5b + c = 5

36a + 6b + c = 10

We get:

a = -0.2143

b = 3.6429

c = 1.5714

So the function that best represents the data is:

y = -0.2143x^2 + 3.6429x + 1.5714

We can check that this function passes through the points in the table and has a minimum at x = 3.

Learn more about functions in: https://brainly.com/question/21145944

#SPJ1

Answer: 171.3in^2

Step-by-step explanation: Each round part is 1/4 of a circle. First we get the radius of the circle which is 2. Then we find the area so it is 3.14 * 2^2  = 3.14 * 4. That is 12.56. Then, because it is 1/4 of a circle you do 1/4 * 12.56 which is 3.14. There are two of those round parts so 3.14 * 2 = 6.28. The square in between them is 2*2 = 4. Then we find the width which will be 25in - 2in = 23in. 23 * 7 = 161. 161 + 4 + 6.28 = 171.28. Then we round so it is 171.3.

The Effect of Music on Memory Recall Description: This study aims to investigate the impact of music on memory recall. The independent variable is the presence or absence of music during the study phase of the experiment, while the dependent variable is the number of items correctly recalled by participants during the recall phase.

The study will use a between-subjects design where participants will be randomly assigned to either the music or no music group. The study will be conducted in a quiet room where participants will be given a list of 20 words to study for 2 minutes. The music group will have instrumental music playing in the background during the study phase, while the no-music group will have no music playing. After the study phase, participants will be given a recall task where they will have to write down as many words as they can remember from the list. If the study was to be done with a within-subjects design, the change that would need to be made would be to have all participants experience both conditions (music and no music) during the study phase. This would require more time to conduct the study and would potentially increase the likelihood of participant fatigue. The Effect of Background Music on Reading Comprehension

In this study, the aim is to investigate the impact of background music on the reading comprehension of subjects. The independent variable (IV) is the presence or absence of background music, which will be manipulated by playing soft instrumental music or maintaining silence during the reading sessions. The dependent variable (DV) is the reading comprehension of the subjects, measured through a test assessing their understanding of the material they read. This study employs a between-subjects design, where participants are divided into two groups: one group will read with background music, while the other group will read in silence. After the reading sessions, both groups will take the same reading comprehension test, and their scores will be compared to examine the effects of the independent variable on the dependent variable.

To change this study into a within-subjects design, all participants would be exposed to both conditions (background music and silence) during separate reading sessions. The order of conditions would be counterbalanced to account for potential order effects. After each reading session, participants would take a reading comprehension test, and their scores would be compared across conditions to determine the effect of the independent variable on the dependent variable.

Learn more about variable here:- brainly.com/question/17344045

#SPJ11

Answer:

  81 jumps

Step-by-step explanation:

You want the number of jumps required to escape from a drain 245 inches deep if each jump climbs 7 inches, but slides back 4.

The heights in inches reached after 1, 2, 3 jumps are ...

  7, 10, 13, ...

That is, the n-th jump will reach a height of 3n+4 inches.

To obtain a height of 245 inches, we require ...

  3n +4 ≥ 245

  3n ≥ 241

  n ≥ 80 1/3 . . . . . . . where n is an integer

It will take 81 hops for the frog to escape the drain.

__

Additional comment

On the 80th jump, the frog reaches a height of 244 inches, but slides back to 240. The 81st jump will take the frog to a height of 247 inches, which gets it out of the drain.

<95141404393>

This is true, so we have shown that the solution x = 4 is indeed of the form x. To solve an equation that has only one solution, we need to first identify the equation. Let's say the equation is given as:

x + 3 = 7

To solve for x, we need to isolate it on one side of the equation. We can do this by subtracting 3 from both sides:

x + 3 - 3 = 7 - 3

This simplifies to:

x = 4

So the solution to this equation is x = 4.

Now, to show that the solution is of the form x, we can substitute the value of x into the original equation and see if it satisfies the equation.

In this case, we have:

4 + 3 = 7

This is true, so we have shown that the solution x = 4 is indeed of the form x.

Overall, the steps to solve an equation with one solution are:

1. Identify the equation
2. Isolate x on one side of the equation
3. Simplify the equation to find the value of x
4. Substitute the value of x into the original equation to check that it satisfies the equation
5. If the substituted value satisfies the equation, the solution is of the form x.

Learn more about equation here:

https://brainly.com/question/29657992

#SPJ11

In a country with a population of 80 million, 28% is susceptible. To calculate the number of susceptible people, multiply the population by the percentage:

80,000,000 * 0.28 = 22,400,000 susceptible individuals

The maximum number of people likely to get infected in the healthy population is the difference between the total population and the susceptible population:

80,000,000 - 22,400,000 = 57,600,000

So, in this country, the maximum number of people likely to get infected in the healthy population is 57,600,000, and in the susceptible population is 22,400,000.

Learn more about  population here:

https://brainly.com/question/27991860

#SPJ11

The approximate area is given as about 40 km² to 50 km²

In the plane that we have here, we can seer that the squares each is given as

1 k = square kilometer.

We have to solve for the area that the park is shown to civer

= 8 x 6

= 48 km

Given that not all the areas are covered by this park, we will have to find the area in the options where 48 km square can fall under

Hence we will say approximate area of this park is about 40 km² to 50 km²

Read more on area here:https://brainly.com/question/28184257

#SPJ1