Will give BRAINIEST and EXTRA POINTS for correct answer.

Answer: I believe the answer is d)  the rock crumbles at an ocean ridges

Explanation:

Answer:

Autotrophs are organisms that prepare their own food through the process of photosynthesis, whereas heterotrophs are organisms that cannot prepare their own food and depend upon autotrophs for nutrition.

Explanation:

Btw I searched this up found it on a website called byjus.com. Hope this helps!

Answer:

high use of mineral resources

Explanation:

brainliest pls

Answer:

The water will not interfere with the testing of flammable liquids.

When forensic scientists investigate this fire, the water will not interfere with the testing of flammable liquids. Therefore, option B is correct.

A flammable liquid is one with a flash point at or below the nominal threshold temperatures specified by a variety of national and worldwide standards organizations. This means that it can easily ignite in air at room temperature.

our home probably contains a sizable number of flammable liquids. Rubing alcohol, nail polish remover, hand sanitizer, and wart remover are some items that quickly catch fire in addition to gasoline and lighter fluid.

Gasoline is one of the most hazardous liquids in the home and causes over 8,000 home fires each year. One explanation is the frequent inappropriate storage of items in garages. Store it at room temperature, away from heat sources like your hot water heater or furnace, in a UL-approved container.

Thus, option B is correct.

To learn more about flammable liquid, follow the link;

https://brainly.com/question/4358446

#SPJ2

The most soluble substances gives more number of particles in solution. 1.0 M of sodium sulphate contains most particles here.

Solubility of a solute is the fraction of its concentration which is dissolved in a solvent. When solutes dissolved in solvent the dissociates into ions.

Solubility of a substance depends on the temperature, pressure, bond type and molecular weight of the compound. The no.of particles produced by a molecule when dissolved vary from compound to compound.

Glucose and ethylene glycol partially dissolves in water and they give only one particle as such and does not form ions.

Potassium chloride gives one K⁺ ions and Cl⁻ ions and magnesium sulphate gives one Mg²⁺ and SO₄²⁻ ions. Whereas, sodium sulphate (Na₂SO₄) gives two sodium ions and one sulphate ion.

Hence, more particles are produced when sodium sulphate is dissolved in water. Therefore, 5th option is correct.

To learn more about solubility, refer the link below:

https://brainly.com/question/8591226

#SPJ2

Answer:

A ⟶ A⁺ + e⁻

AH + B ⟶ A + BH

A + BO ⟶ AO + B

A + e⁻ ⟶ A⁻

A + BH ⟶ AH + B

AO + B ⟶ A + BO

-TheUnknownScientist

Answer:

liquid

Explanation:

Adjusting pH in Water

Pure or distilled water has a pH level of 7, which means it is neutral. If you want to increase the pH of water, you must add an alkaline substance, such as baking powder, to it. If you want to decrease the pH of water, you add an acidic substance, such as lemon juice, to it

A buffer can be added to a solution to control the pH. The correct option is c.

PH is potential hydrogen. It is the value of how acidic or alkaline, the solution is.

The pH scale is consisting of 1 to 14 measure numbers, a pH less than 7 is acidic and a pH more than 7 is basic.

A buffer is a solution that maintains the pH of any solution.

Thus, the correct option is C, a buffer.

Learn more about pH

https://brainly.com/question/491373

Answer:

Cell is defined as the smallest unit or basic unit of life.

the smallest part of a living thing that can carry out the activities needed for life. Basically the unit of all forms of life.

Explanation:

hope this helps in anyway :)

Given-

Hydrogen ion concentration pH = 0.008

Now,

we know that pH + pOH = 14

pOH = 14-0.008

pOH = 13.992

Answer: It is :B:

Explanation: also sub to technoblade

65.38 u (or g)

I just searched it up

Answer:

1600J

Explanation:

1 mole of oxygen gas (O2) has a mass of 32g i.e. the molar mass = 32g/mol

Kinetic energy (K.E) = ½ × m × v²

Where;

m = mass (g)

v = speed or velocity (m/s)

From the information given in this question;

m = 32g

V = 10m/s²

K.E = ½ × 32 × 10²

K.E = 16 × 100

K.E = 1600J

Answer: The standard state refers to 1 atm and [tex]25^{o}C[/tex].

Explanation:

It is known that a chemical/substance can either be present in a solid, liquid or gaseous state.

So, when the phase of a substance like solid, liquid or gas is present at 1 atmosphere pressure and at a temperature of [tex]25^{o}C[/tex] then it known as standard state of substance.

Thus, we can conclude that standard state refers to 1 atm and [tex]25^{o}C[/tex].

Answer:

See explanation.

Explanation:

Hello there!

In this case, according to the description of the chemical reaction, it is possible to write the corresponding equation as follows:

[tex]Mg+2HCl\rightarrow MgCl_2+H_2[/tex]

Whereas we are given the mass of magnesium and the concentration and volume of HCl; it means that we can calculate the moles of hydrogen yielded by each of these reactants in order to identify the limiting reactant:

[tex]m_{H_2}^{by\ Mg}=23gMg*\frac{1molMg}{24.305gMg}*\frac{1molH_2}{1molMg}=0.95gH_2 \\\\m_{H_2}^{by\ HCl}=0.412L*2.6\frac{molHCl}{1L}*\frac{1molH_2}{2molHCl}*=0.54gH_2[/tex]

Therefore, we infer that the limiting reactant is HCl as it yields the fewest moles of hydrogen. Next since the vapor pressure of water at 81 °C is about 0.4675 atm we infer that the pressure of hydrogen is 2.23 atm - 0.4675 atm = 1.7625 atm. In such a way, we use the ideal gas equation to obtain the volume of hydrogen:

[tex]V_{H_2}=\frac{0.54molH_2*0.08206\frac{atm*L}{mol*K}*(81+273.15)K}{1.7625atm} \\\\V_{H_2}=8.9L[/tex]

Finally, since the pressure of water is 0.4675 atm and the volume is the same for both, we obtain the moles of water and subsequently the required grams as shown below:

[tex]n_w=\frac{0.4675atm*8.9L}{0.08206\frac{atm*L}{mol*K}*(81+273.15)K} \\\\n_w=0.143molH_2O\\\\m_w=0.143molH_2O*\frac{18.02gH_2O}{1molH_2O} =2.6gH_2O[/tex]

Best regards!

Answer: the substance is from an animal source

Explanation:

Answer:

We often want to decrease the rates of certain reactions rather than speeding them up. For example, to prolong the shelf lives of certain foods, the chemical reactions by which they spoil must be slowed down.

Answer: Salt is an ionic compound.

Explanation:

A compound formed by transfer of electrons from one atom to another is called an ionic compound.

For example, chemical formula of salt is NaCl (also called table salt).

Salt is formed when sodium (atomic no. 11) donates its one valence electron to chlorine (atomic no. 17). As a result, sodium ion and chlorine ion chemically combine together and form the compound NaCl.

Thus, we can conclude that salt is an ionic compound.

Answer:

1 - NO2 at 339 K

2 - Ne at 371 K

3 - H2 at 371 K

4 - H2 at 425 K

Explanation:

Kinetic Energy is directly related to temperature; the higher the temperature the higher the kinetic energy. Kinetic energy is also equal to 12m⋅v2, so if we want a high velocity we want high temp and low mass. So let's list out approximate masses:

m(H2)≈2

m(NO2)≈46

m(Ne)≈20

So we have NO2 at 339 K, the lowest temperature out of the mix, and the highest mass out of the mix, so this is moving the slowest.

In contrast, we have H2 at 425 K, the highest temperature out of the mix, and the lowest mass out of the mix, so this is moving the fastest.

Now we have Ne and H2 at 371 K, since they are at the same temperature they have the same kinetic energy. But H2 is lighter than Ne so it must be faster. To quantify this mathematically, let's assume (this is wrong but just as an assumption for an example) KE at 371 K is 100:

100=12⋅m⋅v2

200=m⋅v2

√200m=v

So H2 is about v=10 and Ne is about v=√10≈3

So the order to recap is:

1 - NO2 at 339 K

2 - Ne at 371 K

3 - H2 at 371 K

4 - H2 at 425 K

Hope that makes it clearer!

Answer:

Hydroxylamine and pyridine

Explanation:

Just did it

Answer:

0.017 mole of Pb(NO₃)₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2KOH + Pb(NO₃)₂ —> 2KNO₃ + Pb(OH)₂

From the balanced equation above,

1 mole of Pb(NO₃)₂ reacted to produce 2 moles of KNO₃.

Finally, we shall determine the number of mole of Pb(NO₃)₂ required to produce 0.034 mole of KNO₃. This can be obtained as follow:

From the balanced equation above,

1 mole of Pb(NO₃)₂ reacted to produce 2 moles of KNO₃.

Therefore, Xmol of Pb(NO₃)₂ will react to produce 0.034 mole of KNO₃ i.e

Xmol of Pb(NO₃)₂ = 0.034 / 2

Xmol of Pb(NO₃)₂ = 0.017 mole.

Thus, 0.017 mole of Pb(NO₃)₂ is needed for the reaction.

Answer: An object's gravitational force depends primarily on the object's mass.

Explanation:

According to the Universal law of gravitation, every object whether is it is having large r small mass tends to exert a force on every other object, therefore this force is known as gravitational force.

Formula to calculate gravitational force is as follows.

[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}[/tex]

where,

F = Gravitational force

G = Gravitational constant = [tex]6.674 \times 10^{-11} m^{3}/kg s^{2}[/tex]

[tex]m_{1}[/tex] = mass of object 1

[tex]m_{2}[/tex] = mass of object 2

r = distance between the centers of the objects

Therefore, it means that gravitational force of an object primarily depends on an object's mass.

Thus, we can conclude that an object's gravitational force depends primarily on the object's mass.

Explanation:

Please provide the chemical reaction to allow others to help solve this problem. Assuming the system is in STP, then use the molar volume to solve for the moles of Oxygen and then use the mole ratio to determine the moles of NO2 that is produced as a result of this reactant

Answer:

the answer is the last one , sorry if im wrong.

Explanation:

Answer:

the answer to this is 71.0 grams of chlorine

Answer: Mass is converted to the energy binding a nucleus together.

Explanation: a p e x

Mass is converted to the energy binding a nucleus together cause a mass defect.Hence , Option (C) is correct.

The actual atomic mass is less than the predicted mass calculated by adding the masses of nucleons.

This additional mass is accounted for by binding energy that is released when a nucleus is formed.

When a nucleus is formed, some of the mass is converted to energy and this results in the mass defect.

Therefore, Mass is converted to the energy binding a nucleus together cause a mass defect. Hence , Option (C) is correct.

Learn more about mass defect here ;

https://brainly.com/question/11624098

#SPJ2

Answer:

Taxonomy

Explanation: