william herschel tried to locate the center of our galaxy by counting the number of stars in different directions. this did not work because

The correct option is C, The period of oscillation should be proportional to A^-1 square root of m/k.

mass m, with dimensions of M

force constant k with dimensions of ML^-2T^-2

amplitude A, with dimensions of L

To find the relation for period of oscillation with dimension T

To get the dimension T from m,k and A

[tex]1/A*\sqrt{(m/k)} = 1/L*\sqrt{(M/ML^{-2}T^{-2}) }= 1/L*LT = T[/tex]

Oscillation refers to the repetitive variation of a physical quantity around a central value or equilibrium position. It is a common phenomenon in many natural and man-made systems, ringing from simple pendulums and springs to complex electrical circuits and biological processes.

In an oscillating system, the physical quantity, such as displacement, velocity, or current, continuously changes between maximum and minimum values with a fixed frequency and amplitude. The frequency of oscillation is the number of cycles per unit time, usually measured in Hertz (Hz), while the amplitude is the maximum deviation from the equilibrium position. Oscillations can be periodic, where the motion repeats itself exactly over a fixed time interval, or non-periodic, where the motion is irregular and unpredictable.

To learn more about Oscillation visit here:

brainly.com/question/30111348

#SPJ4

Complete Question: -

The period of oscillation of a nonlinear oscillator depends on the mass m, with dimensions of M; a restoring force constant k with dimensions of ML^-2T^-2 and the amplitude A, with dimensions of L. Dimensional analysis shows that the period of oscillation should be proportional to

a) A square root of m/k b) A^2 m/k c) A^-1 square root of m/k d) (A^2k^3)/m

The damping ratio of the system can be calculated as 0.13.

What is displacement?

Displacement at resonance, Xn = 0.6 inches

Displacement at very high RPM, Xv = 0.15 inches

Natural frequency of a system is:

f = (1/2π) * √(k/m)

where k is the stiffness of the system and m is its mass.

Let's assume the mass of the system as m and k is the stiffness of the system.

When the motor is at resonance, the frequency of the system is: n = f

where n is the frequency of the system.

When the motor is running at very high rpm, the frequency of the system is given as:v = f

where v is the frequency of the system.

Now, let's assume the damping coefficient of the system as c.

The displacement of the system:

X = [Xn * exp(-ζωnt)] * sin(ωdt)

where X is the displacement of the system, ζ is the damping ratio of the system, ωn is the natural frequency of the system and ωd is the frequency of the applied force.

The maximum value of the displacement is:

Xmax = Xn / (2ζ * √(1 - ζ²))

Here, Xmax = 0.6 inches when the motor is at resonance Xmax = 0.15 inches

when the motor is running at very high RPM, putting the given values of Xmax in the above equation, we can find the value of the damping ratio, ζ.

For resonance:0.6 = Xn / (2ζ * √(1 - ζ²))

=> 2ζ * √(1 - ζ²)

= Xn / 0.6=> 4ζ² * (1 - ζ²)

= Xn² / 0.36=> 4ζ⁴ - 4ζ² + 0.26244

= 0

Solving this quadratic equation gives us the value of ζ as 0.32.

For high RPM:

0.15 = Xn / (2ζ * √(1 - ζ²))

=> 2ζ * √(1 - ζ²)

= Xn / 0.15=> 4ζ² * (1 - ζ²)

= Xn² / 0.0225

=> 4ζ⁴ - 4ζ² + 1.728 = 0

Solving this quadratic equation gives us the value of ζ as 0.13.

To know more about displacement:

https://brainly.com/question/29769926

#SPJ11

In an alternating current circuit that contains a resistor, an inductor, and a capacitor with 120V, you can find the current by using Ohm's Law.

Ohm's Law states that the current is equal to the voltage divided by the resistance.

To calculate the resistance in an alternating current circuit, you must take into account the resistor, inductor, and capacitor.

For example, if the resistor has a resistance of 10 ohms, the inductor has a resistance of 5 ohms, and the capacitor has a resistance of 20 ohms, then the total resistance would be 35 ohms.

Therefore, the current in the circuit would be 120V/35 ohms = 3.43A.

To know more about Ohm's Law, refer here:

https://brainly.com/question/1247379#

#SPJ11

To calculate the ideal banking angle for a gentle turn

The ideal banking angle for a gentle turn of radius R, with velocity v, and coefficient of friction µ between the road and the tires can be calculated by the formula:

Tan(θ) = (v^2) / (gR)

where g is the acceleration due to gravity = 9.81 m/s²

θ is the banking angleIn this problem,

the radius of the gentle turn is R = 1.40 km = 1400 m

The speed limit is v = 105 km/h = 29.1667 m/s

Applying the formula,

Tan(θ) = (29.1667 m/s)^2 / (9.81 m/s² x 1400 m)

= Tan(θ) = 0.41435θ

= Tan^-1(0.41435)θ = 21.25°

Therefore, the ideal banking angle (in degrees) for a gentle turn of 1.40 km radius on a highway with a 105 km/h  speed limit (about 65 mi/h), assuming everyone travels at the limit is 21.25 degrees.

Learn more about ideal banking angle and speed at : https://brainly.com/question/4931057

#SPJ11

This is due to the fact that the first and second laws of thermodynamics are universally applicable fundamental principles that can be utilised to examine particular systems and processes.

The part of thermodynamics that deals with chemical reactions is called chemical thermodynamics. The first law states that energy is conserved and cannot be created or destroyed. Second law: When natural processes in a closed system result in a rise in entropy, they are spontaneous.

According to the second rule of thermodynamics, an isolated system that is out of equilibrium over time must increase in entropy until it reaches the ultimate equilibrium value.

To know more about thermodynamics visit:-

https://brainly.com/question/15591590

#SPJ1

If the rate of internal energy dissipation in a battery is 1.0 watt, and the current produced by the battery is 0.50 amps, the internal resistance of the battery can be calculated using Ohm's law. Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. The proportionality constant is called the resistance of the conductor, which is expressed mathematically as V = IR, where V is the voltage, I is the current, and R is the resistance.

The power dissipated by the internal resistance of a battery is given by P = I2R, where P is the power, I is the current, and R is the internal resistance. The rate of internal energy dissipation in the battery is given as 1.0 watt, and the current produced by the battery is given as 0.50 amps.

Using Ohm's law, we can calculate the voltage across the battery as V = IR = 0.50 x R. Therefore, the power dissipated by the internal resistance of the battery is P = I2R = (0.50)2 x R = 0.25R.

Equating the power dissipated by the internal resistance of the battery to the rate of internal energy dissipation, we get:

0.25R = 1.0

Solving for R, we get:

R = 1.0/0.25 = 4 ohms.

Therefore, the internal resistance of the battery is 4 ohms.

Internal energy dissipation is the energy that is lost due to friction or resistance in a system. In the case of a battery, internal energy dissipation refers to the energy that is lost due to the internal resistance of the battery. The internal resistance of a battery is a measure of how much energy is lost due to the resistance of the battery's internal components. The higher the internal resistance of the battery, the more energy is lost as heat, which reduces the battery's efficiency.

To know more about Internal energy dissipation refer here:

https://brainly.com/question/15331125#

#SPJ11

Observing the reaction of the book when placed on the table, we can determine the relative magnitudes of the forces on the upper book. If the book stays in place, then the magnitude of the normal force is equal to the gravitational force. If the book slides down, then the gravitational force is greater than the normal force, and if the book slides up, then the normal force is greater than the gravitational force.

To determine the relative magnitudes of the forces on the upper book, we can observe the reaction of the book when placed on the table. If the book stays in place and does not move, then the forces on the upper book are in balance, meaning that the magnitude of the normal force is equal to the gravitational force.

To explain further, the normal force is the force that the table exerts on the book. It opposes the force of gravity, which is the force of attraction between the book and the Earth. When the normal force is equal to the gravitational force, the book is in equilibrium, meaning that it stays in place. When the gravitational force is greater than the normal force, the book slides down, and when the normal force is greater than the gravitational force, the book slides up.

for such more question on magnitudes

https://brainly.com/question/24468862

#SPJ11

A force of 245 N must be applied vertically to lift the bag off the baggage cart.

The force that must be applied vertically to lift a bag off a baggage cart, given that the bag has a mass of 25 kg, can be determined using the formula F = m*g

where F is force, m is mass, and g is acceleration due to gravity. The value of g is 9.8 m/s².So, F = 25 kg x 9.8 m/s² = 245 N. Therefore, a force of 245 N must be applied vertically to lift the bag off the baggage cart.

The mass of the bag = 25 kg.The formula used is, F = m*gwhereF = Force required to lift the bagm = Mass of the bagg = Acceleration due to gravityF = 25 kg x 9.8 m/s² = 245 N.

Therefore, a force of 245 N must be applied vertically to lift the bag off the baggage cart.

to know more about Force refer here:

https://brainly.com/question/13191643#

#SPJ11

Horses that move with the fastest linear speed on a merry-go-round are located near the outside.

A merry-go-round is an amusement park ride that comprises a rotating circular platform equipped with seats or mounts for people to ride on. When the ride is operating, the circular platform rotates around a fixed central axis at a constant velocity, while the people on it rotate with the platform. Linear speed refers to the velocity of the object in a straight line path, regardless of its direction of movement.

Therefore, the linear speed of the mounts on the merry-go-round depends on the radius of the circular path they move on. The closer the horse is to the center, the shorter the path it has to cover during one rotation of the platform, meaning it has a slower linear speed. Conversely, the farther the horse is from the center, the longer the path it has to cover, hence it has a faster linear speed. As a result, the mounts located near the outside of the merry-go-round move with the fastest linear speed.

Learn more about the linear speed at:

https://brainly.com/question/12707353

#SPJ11

Yes, it is reasonable to expect that you would see the Sun with a sensitive radio telescope.

Radio waves can penetrate through the clouds and the atmosphere, so with a powerful radio telescope you can observe the Sun even on a cloudy day.

Gather the necessary components of the radio telescope, such as a dish and receiver. Point the radio telescope towards the Sun. Tune the receiver to the proper frequency. Take a look at the results from the telescope and observe the Sun.

Therefore, you can expect that you would see the Sun with a sensitive radio telescope.

To know more about radio telescope click here:

https://brainly.com/question/3964280

#SPJ11

A net force of 10 N acts on the rock when it is halfway to the top of its path.

The net force acting on the rock can be calculated using the following equation:

Fnet = ma

Where Fnet is the net force, m is the mass, and a is the acceleration.

When the rock is halfway to the top of its path, its velocity is zero since it momentarily stops at the top of its motion. As a result, its acceleration is equal to the acceleration due to gravity, which is -10 m/s² since it is acting in the opposite direction to the upward direction. This is the gravitational force acting on the rock.

We can now calculate the net force acting on the rock at this point in its motion:

Fnet = ma

Fnet = (1 kg)(-10 m/s²)

Fnet = -10 N

Since the acceleration due to gravity is acting downward and the rock is moving upward, the net force is equal to the force of gravity, which is 10 N.

Therefore, the net force that acts on the rock when it is halfway to the top of its path is -10 N or 10 N in the downward direction. This net force is equal in magnitude to the weight of the rock.

Learn more about gravity:

https://brainly.com/question/940770

#SPJ11

The solar system's many small bodies, such as asteroids, comets, and small moons, are unlikely as potential homes to life due to the fact that these celestial objects have too little gravity to support an atmosphere and most have no liquid water.

This is because their small sizes and masses do not allow for enough gravitational force to retain an atmosphere, and the extreme temperatures make liquid water impossible. Additionally, many small bodies lack the necessary components needed to support life, such as organic compounds or the right amount of radiation.

Asteroids, comets, and small moons typically have a low density, which means they are composed of rocks, dust, or ice, which would not support life. Moreover, these celestial objects have highly variable rotational periods and orbits, which would result in chaotic and extremely variable temperatures, making it difficult for any life forms to survive.

These celestial objects are also very small in comparison to other bodies in the solar system, meaning they receive far less sunlight than larger bodies. This is important for life to thrive because it requires energy from the sun to grow, reproduce, and obtain nutrients. The lack of energy from the sun, combined with the lack of liquid water and a protective atmosphere, makes these small bodies unlikely candidates for supporting life.

Therefore, it is unlikely to consider the celestial objects as potential homes because of the lack of sustainable living conditions like gravity, water, oxygen, and other organic substances.

To know more about asteroids, refer here:

https://brainly.com/question/19161842#

#SPJ11

The power input to the heat pump is 25 kW.

The COP (coefficient of performance) of the heat pump is 4.0. This means that for every unit of power consumed by the heat pump, it supplies four units of heat to the building.

The rate at which the heat pump supplies heat to the building is 100 kW.

Therefore, the power input to the heat pump can be calculated as:

Power input = Power output / COP

Power input = 100 kW / 4.0

Power input = 25 kW

Hence, the power input to the heat pump is 25 kW.

To know more about power input click here:

https://brainly.com/question/1141300

#SPJ11

Hence, 127.2 m3/s per second is the required water flow rate from the dam's crest.

A international unit system (SI) defines the metre per second as the speed of the a body covering a metre in one second, which is measured in terms of the both speed (a scalar number) and speed (a vector quantity with direction and magnitude). m/s, m/s1, m/s, or ms are the SI unit symbols.

Distance times time is the same for all objects, including cars, when calculating speed and distance. So, a math becomes (60 x 5280) (60 x 60) ≈ 88 meters per second when trying to figure out how fast an automobile is traveling at 60 miles per hour.

To know more about per second visit:

https://brainly.com/question/17125529

#SPJ1

The electric eel's power output is 222.4 Watts

Given voltage (V) = 278 V

Current (I) = 0.8 A

To find the electric eel's power output, we have to use the formula

P = IV,

Where P is the power output, I is current, and V is the voltage.

So, we can calculate the electric eel's power output as follows:

Power Output (P) = IVP

⇒278 × 0.8

Power Output (P) = 222.4 Watts

Hence, The power output of the electric eel is 222.4 Watts.

To know more about "power output": https://brainly.com/question/866077

#SPJ11

An ice skater is spinning about a vertical axis with arms fully extended. If the arms are pulled closer to the body, the angular momentum of the skater will remain constant while the kinetic energy of the skater increases. The correct option is C.

The angular momentum of the skater is given by

[tex]L = I\omega[/tex],

where I is the moment of inertia of the skater and ω is the angular velocity.

When the skater pulls their arms in, their moment of inertia decreases due to the decreased distance between their body and the axis of rotation.

According to the conservation of angular momentum, the product of the moment of inertia and angular velocity must remain constant. Therefore, if the moment of inertia decreases, the angular velocity must increase to keep the angular momentum constant.

The kinetic energy of the skater is given by

[tex]K = (1/2)I\omega^2[/tex]

As the moment of inertia decreases and the angular velocity increases, the kinetic energy of the skater also increases because it is proportional to the square of the angular velocity.

Therefore, the correct answer is: (C) Remains Constant Increases. The angular momentum remains constant, while the kinetic energy increases due to the increased angular velocity.

Learn more about angular momentum:

https://brainly.com/question/4126751

#SPJ11

The limit on the series resistance so that the energy remaining after one hour is at least 85 percent of the initial energy, is initial energy into 85% by the voltage.

Ohm's Law states that the current in a circuit is directly proportional to the voltage and inversely proportional to the resistance.

Therefore, the total resistance in a circuit can be calculated using the formula: R = V/I

The energy remaining after one hour must be at least 85 percent of the initial energy, we can calculate the resistance by rearranging the formula.

The total resistance can be determined by multiplying the initial energy by 85 percent and dividing it by the voltage. Thus, the limit on the series resistance is [tex]R = (Initial Energy *0.85) / V[/tex].  

To learn more about the series resistance:

https://brainly.in/question/28887091

#SPJ11

If the frequency of the incoming light is decreased, the energy of the ejected electrons will decrease.

The frequency of the incoming light will affect the energy of the ejected electrons. This is because the energy of the ejected electrons is proportional to the frequency of the incoming light.

The energy of the electrons can be determined using the equation:

E = h * f,

where E is the energy, h is Planck’s constant, and f is the frequency of the incoming light. This equation shows that the energy of the electrons is directly proportional to the frequency of the incoming light.

Therefore, if the frequency of the incoming light is decreased, the energy of the ejected electrons will also decrease.

To know more about frequency, refer here:

https://brainly.com/question/14316711#

#SPJ11

The 5-volt reading we can expect between the two test points if the reference lead is on the lowest voltage.

The given data is as follows:

The first test marked voltage = 5 volts

The second test marked voltage = -3.3 volts

Let us assume that the two test points are there is a conductive track between them, the voltage between the two points can be calculated using the voltage difference between the two test points.

The voltage difference between the  two test points is calculated as:

5 volts - (-3.3 volts) = 8.3 volts

If the reference lead is on the lowest voltage, It means that the negative side of the voltmeter is attached to the test point with the lower voltage which is -3.3 volts.

The voltage difference between the  two test points is

8.3 volts - 3.3 volts = 5 volts

Therefore we can conclude that the 5-volt reading we can expect between the two test points.

To learn more about voltage

https://brainly.com/question/14291865

#SPJ4

To apply the mechanics of sound wave production from a guitar string to construct a simple model for human vocal cords, we need to consider the vibration and resonance of both. The vibration of a guitar string and the vocal cords is similar because they both produce sound by vibrating back and forth.

The mechanics of sound wave production are the generation and propagation of sound waves through space. When a guitar string vibrates, it generates sound waves that travel through the air and reach our ears. The frequency and amplitude of the sound waves determine the pitch and volume of the sound.

Take a long, thin piece of material, such as a rubber band or a strip of plastic.2. Stretch it taut between two points, such as two pencils or two pegs.3. Pluck the string with your finger and observe the vibration.4. Vary the tension and length of the string to produce different pitches.

Read more about sound :

https://brainly.com/question/1199084

#SPJ11

Answer:

Part A:

The speed of a wave on the string can be calculated using the formula:

v = fλ

where f is the frequency and λ is the wavelength. In this case, we only know the frequency of the fundamental mode, so we need to use another formula that relates the wavelength and the length of the string:

λn = 2L/n

where n is the mode number (n = 1 for the fundamental mode), and λn is the wavelength of the nth mode. Substituting this expression for λ into the first formula, we get:

v = fn × 2L/n

Substituting the given values, we get:

v = (294 Hz) × 2(0.69 m)/(1)

v = 406 m/s

Therefore, the speed of a wave or pulse on the string is 406 m/s.

Part B:

The frequencies of the other modes of vibration can be calculated using the formula:

fn = nv/2L

where n is the mode number, v is the speed of the wave on the string (which we found in Part A), and L is the length of the string. Substituting the given values, we get:

f2 = (2 × 406 m/s)/(2 × 0.69 m) = 589 Hz

f3 = (3 × 406 m/s)/(2 × 0.69 m) = 883 Hz

f4 = (4 × 406 m/s)/(2 × 0.69 m) = 1178 Hz

Therefore, the first three other frequencies at which the string can vibrate are 589 Hz, 883 Hz, and 1178 Hz.

The given statement, "surface currents flow vertically in the uppermost 400 meters of the water column," is false because surface currents flow horizontally in the uppermost 400 meters of the water column. They move water parallel to the surface, driven by factors such as wind and temperature differences.

Surface currents are driven by the wind, and they are characterized by movement across the surface of the water. The direction and intensity of surface currents are influenced by a variety of factors, including wind speed and direction, the shape of the coastline, and the rotation of the Earth. These currents are an essential component of the ocean circulation system and can have a significant impact on the climate and the distribution of marine life. They flow parallel to the water columns in the uppermost parts.

Learn more about surface currents here:

https://brainly.com/question/19757282

#SPJ11

Answer:

Explanation:

A seatbelt is designed to stretch a bit when the car decelerates rapidly. You travel forward a little while being stopped - you do not stop sharply as you would if you hit the dashboard. The seatbelt stretching increases the time over which your momentum is changed, thereby decreasing the force experienced by your body.

Airbags are made from a strong coated fabric. They are stored in a module mounted on the steering wheel and dashboard and side panels of the car. The inflation of them is initiated by crash sensors that activate upon impact at speeds of more than 10-15 miles per hour. They are mounted in several locations on the car body. In a crash, the sensor sends an electrical signal to the airbag which then causes the airbag to deploy. It ignites a chemical propellant which produces nitrogen gas, which then inflates the bag itself.

The magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg is 981 N.

To determine the magnitude of the force on the child, we must find the magnitude of the centripetal acceleration of the child at the low point first. We can use the equation:

[tex]a_{c}[/tex] = [tex]\frac{v^{2} }{r}[/tex]

where v = 9 m/s and r = 2 m

thus,

[tex]a_{c}[/tex] = [tex]\frac{9^{2} }{2}[/tex]

[tex]a_{c}[/tex] = 40.5 m/s²

And then, we find out the magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg.

∑[tex]f_{y}[/tex] = m × [tex]a_{c}[/tex]

[tex]f_{n}[/tex] - w = m × [tex]a_{c}[/tex]

[tex]f_{n}[/tex] = m × [tex]a_{c}[/tex] + w

[tex]f_{n}[/tex] = (18.5 × 40.5) + 18.5 (9.80)

[tex]f_{n}[/tex] = 981 N

Thus, the magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg in N is 981 N.

Your question is incomplete, but most probably your full question was

A mother pushes her child on a swing so that his speed is 9.00 m/s at the lowest point of his path. The swing is suspended 2.00 m above the child’s center of mass.

For more information about magnitude of the force refers to the link: https://brainly.com/question/30033702

#SPJ11

The total mechanical energy and gravitational potential energy of the asteroid-sun system will change.

As the asteroid gets closer to the sun in its highly elliptical orbit, both the total mechanical energy and gravitational potential energy of the asteroid-sun system will change.

The total mechanical energy of the asteroid-sun system is the sum of its kinetic energy and gravitational potential energy. As the asteroid moves closer to the sun, its kinetic energy will increase due to the increase in speed, but its gravitational potential energy will decrease due to the decrease in distance from the sun. Therefore, the total mechanical energy of the asteroid-sun system will remain constant, according to the law of conservation of energy.

However, if the asteroid encounters any gravitational forces or other external forces, such as a collision with another object or a thrust from a spacecraft, its mechanical energy can change.

More on asteroids can be found here: https://brainly.com/question/19161842

#SPJ1

20 cm apart, the charges of +1.0 x 10⁻⁶ C and –1.0 x 10⁻⁶ C exert a force of 449.5 N on one another. This force is directed from the negative charge to the positive charge.

According to Coulomb's law, the force F between two point charges, q1 and q2, that are separated by a distance r, is computed as F=k|q1q2|r2.

It is possible to determine the force between two point charges using Coulomb's law:

F = k*(q1*q2)/r²

In this case, we have[tex]q1 = +10.0 x 10^-6 C, q2 = -50.0 x 10^-6 C, and r = 20 cm = 0.2 m.[/tex]

Plugging in these values, we get:

[tex]F = (8.99 x 10^9 N m^2/C^2) * [(+10.0 x 10^-6 C) * (-50.0 x 10^-6 C)] / (0.2 m)^2[/tex]

Simplifying, we get:

F = -449.5 N.

To know more about Charge visit:-

https://brainly.com/question/9194793

#SPJ1

The magnitude of the change in the momentum of the billiard ball is 0.268 kg⋅m/s. The direction of the change of momentum vector points at 59.6 degrees, measured counterclockwise from the x-axis along the cushion.

This result can be found by using the equation for conservation of momentum, which states that both the magnitude and the direction of the momentum before and after the collision must be the same.

Since the mass and the speed of the ball changed, the direction of the vector must have changed as well. In this case, the vector changed direction from 60 degrees to 47 degrees, a difference of 13 degrees.

This means that the vector must have rotated counterclockwise by 13 degrees, or in other words, the change of momentum vector points at 59.6 degrees, measured counterclockwise from the x-axis along the cushion.

Know more about momentum here

https://brainly.com/question/30487676#

#SPJ11

In dragging a table across a rough floor, the potential energy for friction depends on the coefficient of friction, normal force, and distance traveled by the table, hence option (a), (b), and (c) are correct.

In this case, the potential energy for friction would depend on the following quantities:

Coefficient of friction: The coefficient of friction between the table and the floor would determine how much force is required to move the table and hence, the potential energy for friction.

Normal force: The normal force acting on the table due to the weight of the table and any objects placed on it would also affect the potential energy for friction.

Distance moved: The distance the table is moved would determine the amount of work done against friction and hence, the potential energy for friction.

Surface area: The surface area in contact between the table and the floor could also affect the potential energy for friction.

Overall, the potential energy for friction depends on a combination of factors, including the properties of the surfaces in contact, the force required to move the object, and the distance moved.

Therefore correct options are (a), (b), and (c).

Suppose you were dragging a table across a rough floor. in this case, the potential energy for friction depends on which quantity or quantities? (choose all that apply)

a. The total distance the table travels.

c. The coefficient of friction between the table and the floor.

d. The normal force that the floor exerts on the table.

e. There is no potential energy for frictional forces.

Learn more about friction:

https://brainly.com/question/24338873

#SPJ11

The following statement is true about this circuit: option (A) The equivalent resistance of the circuit is the algebraic sum of all resistors.

This means that the total resistance of the circuit is equal to the sum of the individual resistances of each resistor. The total voltage on this combination is an algebraic sum of voltages on each resistor. This means that the total voltage of the circuit is equal to the sum of the voltages across each individual resistor.

The currents through all resistors are the same. This means that the total current that flows through the circuit is the same as the current that flows through each individual resistor.

To summarize, in a series circuit the equivalent resistance, total voltage, and current are equal to the algebraic sum of all the individual resistances, voltages, and currents respectively.  

To know more about resistance refer here:

https://brainly.com/question/11431009#

#SPJ11

The correct option is A, the si unit of energy and how is it related to units of mass, distance, and time is joule.

The joule is a unit of measurement used to express energy or work done. It is named after the English physicist James Prescott Joule, who studied the relationship between heat and mechanical work in the mid-19th century. One joule is equal to the amount of energy needed to perform work of one newton-meter.

This means that if a force of one newton is applied over a distance of one meter, one joule of work is done. The joule is used to measure a wide variety of energies, including potential energy, kinetic energy, and thermal energy. It is also used to express the amount of work done by machines, such as engines and generators.

To learn more about Joule visit here:

brainly.com/question/18596314

#SPJ4

Complete Question: -

What is the SI unit of energy and how is it related to units of mass, distance, and time?

a. joule

b. watt

c. kilo

d. Newton