Answer:
It is due to the large impulse is imparted on the flour.
Explanation:
A ball is moving faster.
When a ball is moving faster strikes to the flour, the change in momentum is large and thus the impulse imparted on the flour is large.
Impulse = change in momentum
So, as the flour experiences large impulse and large momentum so that the flour spreads out.
If the change in momentum is large so the flour spreads out is more.
When a ball moves with faster velocity, then a greater impulse force is generated that causes more flour to spread out.
What is momentum?Momentum can be defined as the mass in motion. It is the product of mass and velocity. It is given by the formula,
p = mv
where p is the momentum, m is the mass, and v is the velocity.
As we know that the ball has some mass and the ball is moving with some velocity, therefore, the ball will have some momentum. Also, we know that when the ball will hit the flour the momentum of the ball will become zero, therefore, the change in momentum in such a short time will generate an impulse.
Thus, if the velocity of the ball is more than the impulse generated will be more which will cause more flour to spread out.
Hence, When a ball moves with faster velocity, then a greater impulse force is generated that causes more flour to spread out.
Learn more about Momentum:
https://brainly.com/question/4956182
what is fire proof plastic
Explanation:
.Flame retar,dant plastic additi,ves are compounds added to plastics and other materials to inhibit, suppress or de,lay combustion. These compounds are useful in impending burning in the ign,ition phase of fire. They do not prevent char,ring or melting nor do they increase the heat resistance of a material
The sunlight reaches the ground through radiation
Answer:
y e s
Explanation:
Why does the needle of a compass point north?
a. Because the southern pole of the Earth's magnet repels it.
b. Because the southern pole of the Earth's magnet is in the north.
Because the northern pole of the Earth's magnet is in the north
d. Because the Earth's core is made of steel.
C.
Answer:
b. Because the southern pole of the Earth's magnet is in the north.
Explanation:
This is very weird to think about but Earth's southern magnetic pole is in Earth's geographic north. So when compass points north, it is actually getting attracted to the southern magnetic pole (that is actually located in the north direction- geographic location- in earth).
If you were capable of converting mass to energy with 100%, efficiency, how much mass would you need to produce 3.5x10^12 Joules of energy?
Answer:
a) 3.9 x 10⁻⁵ kg
Explanation:
The amount of mass required to produce the energy can be given by Einstein's formula:
[tex]E = mc^2\\\\m = \frac{E}{c^2}[/tex]
where,
m = mass required = ?
E = Energy produced = 3.5 x 10¹² J
c = speed of light = 3 x 10⁸ m/s
Therefore,
[tex]m = \frac{3.5\ x\ 10^{12}\ J}{(3\ x\ 10^8\ m/s)^2} \\\\m = 3.9\ x\ 10^{-5}\ kg[/tex]
Hence, the correct option is:
a) 3.9 x 10⁻⁵ kg
After being struck by a bowling ball, a 1.8 kg bowling pin sliding to the right at 5.0 m/s collides head-on with another 1.8 kg bowling pin initially at rest. Find the final velocity of the second pin in the following situations: a) The first pin moves to the right after the collision at 0.8 m/s. Answer in units of m/s. 010 (part 2 of 2) 10.0 points b) The first pin stops moving when it hits the second pin. Answer in units of m/s
Answer:
a) v₂ = 4.2 m/s
b) v₂ = 5 m/s
Explanation:
a)
We will use the law of conservation of momentum here:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = m₂ = mass of bowling pin = 1.8 kg
u₁ = speed of first pin before collsion = 5 m/s
u₂ = speed of second pin before collsion = 0 m/s
v₁ = speed of first pin after collsion = 0.8 m/s
v₂ = speed of second after before collsion = ?
Therefore,
[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0.8\ m/s)+(1.8\ kg)(v_2)\\v_2 = 5\ m/s - 0.8\ m/s[/tex]
v₂ = 4.2 m/s
b)
We will use the law of conservation of momentum here:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = m₂ = mass of bowling pin = 1.8 kg
u₁ = speed of first pin before collsion = 5 m/s
u₂ = speed of second pin before collsion = 0 m/s
v₁ = speed of first pin after collsion = 0 m/s
v₂ = speed of second after before collsion = ?
Therefore,
[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0\ m/s)+(1.8\ kg)(v_2)[/tex]
v₂ = 5 m/s
large amounts of energy are converted to small amounts of mass. small amounts of energy are converted to large amounts of mass. small amounts of mass are converted to large amounts of energy. large amounts of mass are converted to small amounts of energy. mass is destroyed and energy is created. energy is destroyed and mass is created.
Answer:
small amounts of mass are converted to large amounts of energy
Explanation:
According to the mass-energy equivalence, which Albert Einstein initially proposed as a general principle. It was revealed that mass and energy are connected and that a "small amount of mass can be converted into enormous amounts of energy."
Using the formula E=mc^2. This means Energy equals mass times the speed of light squared.
Hence, it is true that "small amounts of mass are converted to large amounts of energy."
Juan's mother drives 12.5 miles southwest to her favorite shopping mall. What is the velocity of her
automobile if she arrives at the mall in 7.25 minutes?
Answer:
v1= 12.5miles, t= -7.25m, a= 0
v= 1/2at^2
v= 1/2×
An artificial sattelite is moving in a circular orbit of radius 42250km calculate its speed if it takes 24 hours to revolve around the earrth
Answer:
v = 11061.02 km/h
Explanation:
Given that,
The radius of the circular orbit, r = 42250 km
Time taken to revolve around the Earth, t = 24 hours
We need to find the speed of the satellite. We know that, speed of an object is equal to total distance traveled divided by the time taken. So,
[tex]v=\dfrac{2\pi r}{T}[/tex]
Put all the values,
[tex]v=\dfrac{2\pi \times 42250}{24}\\\\v=11061.02\ km/h[/tex]
So, the speed of the satellite is equal to 11061.02 km/h.
pls answer my quetion i will give brainlist answer
Answer:
here's an explanation but not the answer
please kindly send No or Yes understand.
Explanation:
A 10-N force is applied to push a block across a friction free surface for a displacement of 5.0 m to the right.
See Answer
See Answer
A 10-N frictional force slows a moving block to a stop after a displacement of 5.0 m to the right.
(answer the question or get reported) Please solve it with the steps thanks :)
Answer:
Fx = 35.36 N
Fy = 35.36 N
Explanation:
From the question,
The X component of the force is
Fx = Fcos∅.................. Equation 1
Where Fx = X component of the force, F = Force, ∅ = Angle to the horizontal.
Give: F = 50 N, ∅ = 45°
Substitute into equation 1
Fx = 50(cos45°)
Fx = 50(0.7071)
Fx = 35.36 N
Similarly,
For Y component
Fy = Fsin∅
Where F y = Y component
Fy = 50(sin45°)
Fy = 50(0.7071)
Fy = 35.36 N
Two light waves of equal wavelength, lambda, are emitted in phase from separate sources and propagate to a common point P. Light wave 1 must travel a longer distance (d1) than light wave 2 (d2) to reach point P, where d1 – d2 is equal to the path difference between the two light waves. If the two waves interfere constructively at point P, what must be true about the path difference between the two light waves?
Answer:
The path difference must be equal to an integral (1 * lambda, 2 * lambda, -------n * lambda) number of wavelengths for constructive interference to occur.
After being assaulted by flying cannonballs, the knights on the castle walls (12.0 m above the ground) respond by propelling flaming pitch balls at their assailants. One ball lands on the ground at a distance of 81.1 m from the castle walls. If it was launched at an angle of 53.0° above the horizontal, what was its initial speed?
Answer:
28.6 m/s
Explanation:
Using the equation for the range of a projectile,
R = U²sin2θ/g where U = initial speed of flaming pitch balls, θ = launch angle = 53° and g = acceleration due to gravity = 9.8 m/s²
Making U subject of the formula, we have
U = √(gR/sin2θ)
substituting the values of the variables into the equation given that R = 81.1 m, we have
U = √(9.8 m/s² × 81.1 m/sin2(53°))
U = √(794.78 m²/s²/sin106°)
U = √(794.78 m²/s²/0.9613)
U = √(826.78 m²/s²)
U = 28.75 m/s
U ≅ 28.6 m/s
Two arrows are shot vertically upward. The second arrow is shot after the first one, but while the first is still on its way up. the initial speeds are such that both arrows reach their maximum heights at the same instant, although these heights are different. Suppose the that initial speed of the first arrow is 34 m/s and that the second arrow is fired 0.204081632653061 seconds after the first. Determine the initial speed of the second arrow.
Answer:
The initial speed of the second arrow is 33.8 m/s.
Explanation:
initial speed of first arrow, u = 34 m/s
Let the initial height of the second arrow is h.
Let they both reaches at maximum height H.
Let the time taken by the first arrow is t and the second arrow is t - 0.0204
Let the initial speed of the second arrow is u'.
Use first equation of motion for the first arrow.
v = u - gt
0 = u - gt
34 = gt ..... (1)
For the second arrow
v =u' - g (t - 0.0204)
0 = u' - gt + 9.8 x 0.0204
u' = 34 - 0.1999 = 33.8 m/s
Charges of +3 µC and –5 µC are 2 mm from each other. The –5 µC charge is replaced with a +5 µC charge.
How will the electrical force between the charges compare with the original force?
same force, but in the opposite direction
same force, but in the same direction
greater force, but in the opposite direction
greater force, but in the same direction
Answer: same force in opposite direction.
Explanation: Charges of opposite sign attracts each other and charges with same sign repel each other. Because only sign of negative charge changes, and absolute value of charge remains same, value of force is same but is in opposite direction.
Answer:
A) same force, but in the opposite direction
Explanation:
he's right
moon problem please help!
crescent moon
gibbous moon
new moon
quarter moon
Answer:
crescent Moon crescent Moon
HELP ASAP need it soon
Answer:
The answer to your question is given below.
Explanation:
The energy and frequency of a wave are related by the following equation:
E = hf
Where
E => is the energy.
h => is the Planck's constant.
f => is the frequency
From the formula i.e
E = hf
The energy is directly proportional to the frequency. Thus, an increase in the frequency of the wave will lead to an increase in the energy and a decrease in the frequency of the wave will lead to a decrease in the energy.
Considering the question given above, if the frequency of the wave is decreased, then the energy of the wave will also decrease.
Which type of electromagnetic radiation is responsible for the colors of
objects?
O A. Radio waves
O B. X-rays
O C. Visible light
O D. Ultraviolet radiation
Answer:
C. Visible light
Explanation:
Visible light is responsible for the colors of objects.
Hope it will help :)❤
Which of the following best describes the formation of surf? Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break. As waves enter shallow water, the distance between wave crests (wave length) shortens, increasing the tendency to break.
Answer:
The question above would be written again but this time with options attached to it for comprehension sake:
Which of the following best describes the formation of surf?
A. Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break.
B. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break.
C. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break.
D. As waves enter shallow water, the distance between wave crests (wavelength) shortens, increasing the tendency to break.
The correct answer is option C (A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break).
Explanation:
Surf could mean crashing waves or breaking waves. Generally, the wave speed is constant in the same medium, however, the wave speed decreases as it enters shallow water which is largely due to the water depth which is relatively small, especially when it encounters the bottom of the shallow water. While the top of the wave overtakes the bottom of the wave, making sure the top of the wave continues at its previous speed.
Compared to yesterday, you did three times the work in one-third the time. To do so, your power output must have been ___
Answer: 9 times yesterday's power output
Explanation:
Power is the rate at which a certain work is done. The unit of power is Watt and it's equal to work divided by the time taken to complete the work.
In this scenario, since the person did three times the work in one-third the time, then the power output will be:
= Work done / Time
= 3/⅓
= 3 × 3
= 9
Therefore, the power output must have been 9 times yesterday's power output.
-In a series LRC circuit, the frequency at which the circuit is at resonance is f0. If you double the resistance, the inductance, the capacitance, and the voltage amplitude of the ac source, what is the new resonance frequency?
A) 4 f0
B) 2 f0
C) f0
D) f0/2
E) f0/4
When you double capacitance and inductance, the new resonace frequency becomes f0/2.
Resonance frequencyThe resonace frequency of RLC series circuit, is the frequency at which the capacitivity reactance is equal to inductive reactance.
Xc = Xl
[tex]\frac{1}{2\pi f_0C} = 2\pi f_0 L\\\\4\pi^2 f_0^2 LC = 1\\\\f_0^2 = \frac{1}{4\pi^2 LC} \\\\f_0 = \sqrt{\frac{1}{4\pi^2 LC} } \\\\f_0 = \frac{1}{2\pi } \frac{1}{\sqrt{LC} }[/tex]
where;
f0 is the resonace frequencyL is the inductanceC is the capacitanceWhen you double capacitance and inductance, the new resonace frequency becomes;
[tex]f_0 = \frac{1}{2\pi } \frac{1}{\sqrt{LC} }\\\\f_1 = \frac{1}{2\pi } \frac{1}{\sqrt{2L (2C)} } \\\\f_1 = \frac{1}{2\pi } \frac{1}{\sqrt{4LC} }\\\\f_1 = \frac{1}{2}( \frac{1}{2\pi } \frac{1}{\sqrt{LC} })\\\\f_1 = \frac{1}{2} (f_0)[/tex]
Thus, When you double capacitance and inductance, the new resonace frequency becomes f0/2.
Learn more about resonance frequency here: https://brainly.com/question/9324332
Write a short paragraph about Fruit and Seed formation of Strawberry plants.
Can somebody please answer this correctly I will give brainliest
In regard to the Compton scattering experiment with x-rays incident upon a carbon block, as the scattering angle becomes larger, what happens to the magnitude of difference between the incident and scattered wavelengths
Answer:
Increases
Explanation:
In the Compton scattering experiment with x-rays,
The change in operation
[tex]\Delta \lambda = \frac{h}{m_oc} [1-cos\theta][/tex]
Now rest being constant, as \theta increases, cos\theta decreases
Hence, The change in wavelength will increase with the increase in \theta.
Hence, wavelength increases with an increase in the angle of scatttering.
A children's roller coaster is released from the top of a track. If its maximum speed at ground level is 3 m/s, find the height it was released from.
Answer:
h = 0.46 m
Explanation:
According to the law of conservation of energy:
Potential Energy Lost by Roller Coaster = Kinetic Energy Gained by Roller Coaster
[tex]mgh = \frac{1}{2}mv^2\\\\2gh = v^2\\\\h = \frac{v^2}{2g}[/tex]
where,
h = height = ?
v = speed at bottom = 3 m/s
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]h = \frac{(3\ m/s)^2}{(2)(9.81\ m/s^2)}[/tex]
h = 0.46 m
An aluminum-alloy rod has a length of 10.0 cm at 20°C and a length of 10.015 cm at the boiling point of water (1000C). (a) What is the length of the rod at the freezing point of water (0 0C)? (b) What is the temperature if the length of the rod is 10.009 cm? /4mks
Answer:
a. 9.99625 cm b. 68 °C
Explanation:
(a) What is the length of the rod at the freezing point of water (0 0C)?
Before we find the length of the rod, we need to find the coefficient of linear expansion, α = (L - L₀)/[L₀(T - T₀)] where L₀ = length of rod at temperature T₀ = 10.0 cm, T₀ = 20 °C, L = length of rod at temperature T = 10.015 cm and T = 100 °C
Substituting the values of the variables into the equation, we have
α = (L - L₀)/[L₀(T - T₀)]
α = (10.015 cm - 10.0 cm)/[10.0 cm(100 °C - 20 °C)]
α = 0.015 cm/[10.0 cm × 80 °C]
α = 0.015 cm/[800.0 cm °C]
α = 0.00001875 /°C
We now find the length L₁ at T₁ = 0 °C from
L₁ = L₀(1 + α(T₁ - T₀))
So, substituting the values of the variables into the equation, we have
L₁ = L₀(1 + α(T₁ - T₀))
L₁ = 10.0 cm[1 + 0.00001875 /°C(0° C - 20 °C)]
L₁ = 10.0 cm[1 + 0.00001875 /°C × -20° C]
L₁ = 10.0 cm[1 - 0.000375]
L₁ = 10.0 cm[0.999625]
L₁ = 9.99625 cm
(b) What is the temperature if the length of the rod is 10.009 cm?
With length L₃ = 10.009 cm at temperature T₃, using
L₃ = L₀(1 + α(T₃ - T₀))
making T₃ subject of the formula, we have
L₃/L₀ = 1 + α(T₃ - T₀)
L₃/L₀ - 1 = α(T₃ - T₀)
T₃ - T₀ = (L₃/L₀ - 1)/α
T₃ = T₀ + (L₃/L₀ - 1)/α
substituting the values of the variables into the equation, we have
T₃ = 20 °C + (10.009 cm/10.0 cm - 1)/0.00001875 /°C
T₃ = 20 °C + (1.0009 - 1)/0.00001875 /°C
T₃ = 20 °C + 0.0009/0.00001875 /°C
T₃ = 20 °C + 48 °C
T₃ = 68 °C
f the voltage in a circuit is 80 volts and the resistance is 20 ohms, what is the current?
I = 4 A
Explanation:
From Ohm's law, the voltage is given by
V = IR
or
I = V/R = (80 V)/(20 ohms)
= 4 A
I will mark you as brainliest
pls ans
a) Name the graph?
b) In first 2 s the object is said to be in ______________ motion.
(uniform motion / uniform acceleration)
c) The portion BC of the graph represents which type of motion?
d) Find out acceleration in first 2 s?
I don't know♀ what is your favorite song
which way would 2 negatively charged balloons naturally move? what would that do to the amount of potential energy stored in the field?
Answer:
gsg
Explanation:
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
What is force of repulsion?The basic principle of charges is that, two like charges repel and unlike charge attracts. That is: two negative charged bodies or two positively charged bodies will repel each other and one negative charged body attracts a positively charged body.
In both cases attraction or repulsion the charged particles exerts a force with each other called the electrostatic force. The electrostatic force between two charges is directly proportional to the magnitude of charges and inversely proportional to the distance between them.
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
Find more on electrostatic repulsion:
https://brainly.com/question/24013868
#SPJ2
a.If the hockey player exerted twice as much force (9.00 N) on the puck over the
same distance, how would the amount of work the stick did on the puck be
affected
Answer:
The work done is doubled.
Explanation:
The work done is defined as the product of the force and the displacement in the direction of force.
Work = force x displacement.
As the force is doubled and the displacement remains same, so the work done is also doubled.
Work done is a scalar quantity and its SI unit is Joule.
ACELLUS PHYSICS HELP!!
A 6.93*10-4 C charge has a potential energy U = -3.09 J at a point in space. What is the electric potential V at that point? Include the sign, + or - . (Unit = V)
Answer:
Potential difference, V = -0.000224 Volts
Explanation:
Given the following data;
Quantity of charge = 6.93*10-4 C
Energy = -3.09 J
To find the electric potential V at that point?
Mathematically, the energy transferred per unit of charge is given by the formula;
E = QV
Where:
E is the energy
Q is the quantity of charge
V is the potential difference.
Substituting into the formula, we have;
[tex] -3.09 = 6.93*10^{-4} * V [/tex]
[tex] V = \frac {6.93*10^{-4}}{-3.09} [/tex]
Potential difference, V = -0.000224 Volts