Write balanced half-reactions for the following redox reaction:10CO2(aq)+2Mn+2(aq)+8H2O(l)→ 5C2O−24(aq)+2MnO−4(aq)+16H+(aq)OxiadtionReduction

The solution with a pH of 4.5 is acidic. pH is a measure of the concentration of hydrogen ions in a solution.

For more such question on pH

https://brainly.com/question/12609985

#SPJ11

The structural features that allow an alcohol to exhibit intermolecular hydrogen bonding are:

1. The presence of nonbonding electron pairs on the oxygen atom

2. A hydrogen atom bonded to a highly electronegative oxygen atom.

The polar bond between oxygen and carbon and the presence of hydrogen atoms bonded to carbon are not sufficient to allow intermolecular hydrogen bonding in alcohols.

An example of an intermolecular force known as hydrogen bonding is the attraction of an electronegative atom in one molecule to a hydrogen atom that is bound to a strongly electronegative atom, such as nitrogen, oxygen, or fluorine. Intermolecular hydrogen bonding can take place in alcohols between an oxygen atom's non-bonding electron pairs and the hydrogen atom connected to its electronegative neighbor.

Numerous physical and chemical characteristics of alcohols, including their high boiling temperatures, high viscosities, and water solubility, are caused by this sort of bonding. Intermolecular hydrogen bonding is not possible when there is a polar link between oxygen and carbon or when hydrogen atoms are bound to carbon because those atoms lack the electronegative oxygen or nitrogen needed for this type of bonding are absent.

To know more about the hydrogen bonding refer here :

https://brainly.com/question/10904296#

#SPJ11

Answer: left Mg 6, right Mg 1

Left P 4, right P 4

Balanced no

Explanation:

The person consuming 30 mL of 0.84 M vinegar will consume 1.51 grams of acetic acid ([tex]HC_2H_3O_2[/tex]) per day.

The molecular weight of acetic acid is 60.05 g/mol.

30 mL = 0.03 L

Now we can use the formula:

moles = molarity × volume

moles of [tex]HC_2H_3O_2[/tex] = 0.84 M × 0.03 L = 0.0252 moles

Finally, we can use the formula:

grams = moles × molecular weight

grams of [tex]HC_2H_3O_2[/tex]= 0.0252 moles × 60.05 g/mol = 1.51 g

Molecular weight, also known as molecular mass, is a fundamental concept in chemistry that refers to the mass of a molecule. It is defined as the sum of the atomic weights of all atoms in a molecule. The unit of molecular weight is atomic mass units (amu) or daltons (Da).

The molecular weight of a compound is crucial in various chemical applications, such as determining the stoichiometry of chemical reactions, calculating the amount of substance required to achieve a certain concentration, and predicting the physical properties of a substance. Additionally, it is a necessary parameter in the determination of the molar mass, which is the mass of one mole of a substance.

To learn more about Molecular weight visit here:

brainly.com/question/27988184

#SPJ4

To calculate the solubility of SrCO3 in water at 25°C, we need to use the Ksp value given in the Aleks data tab. Ksp is the solubility product constant and it tells us how much of a solid can dissolve in a solvent. The Ksp value for SrCO3 is 3.3 x 10^-9 at 25°C.

This means that if we dissolve SrCO3 in water, it will only dissolve to a certain extent before reaching its maximum solubility. To calculate the solubility of SrCO3, we can use the following formula: Ksp = [Sr2+][CO32-] where [Sr2+] and [CO32-] are the molar concentrations of the ions in solution. Since SrCO3 dissociates into one Sr2+ ion and one CO32- ion, we can assume that the molar concentration of Sr2+ is equal to the molar concentration of CO32-. Let x be the solubility of SrCO3 in mol/L. Then, we have: Ksp = x^2 x = sqrt(Ksp) x = sqrt(3.3 x 10^-9) = 5.7 x 10^-5 mol/L To convert this to g/L, we need to use the molar mass of SrCO3, which is 147.63 g/mol. 5.7 x 10^-5 mol/L x 147.63 g/mol = 0.0084 g/L Rounding to 2 significant digits, the solubility of SrCO3 in water at 25°C is 0.0084 g/L.

Learn more about solubility here-

https://brainly.com/question/31493083

#SPJ11

The process of passing electricity through a substance to separate molecules is called electrolysis. Option C is correct.

Electrolysis is a process in which an electric current is passed through a conducting medium (such as a liquid or a molten electrolyte) in order to bring about a chemical change. It involves the use of electrical energy to drive a non-spontaneous redox reaction, causing the decomposition or transformation of substances at the electrodes.

Electrolysis has a wide range of applications in various industries. For example, it is used in the extraction of metals from their ores, such as the production of aluminum from bauxite, or the extraction of copper from copper ores.

Electrolysis plays a crucial role in many technological advancements and industrial processes, making it an important area of study in the field of electrochemistry. It has widespread applications in fields such as metallurgy, chemical industry, energy production, and environmental remediation.

Hence, C. is the correct option.

To know more about Electrolysis here

https://brainly.com/question/12994141

#SPJ1

If a product is seen on social media It can be determined whether it is making reliable claims by researching and checking credentials.

It is crucial to assess claims made about items that are promoted on social media seriously and not only depend on what is said in the advertisement. Finding information on the product from reliable sources outside of social media is crucial. Looking for ratings, reviews, and comments from trustworthy websites or sources, such as consumer review websites, industry insiders, or reliable news organizations is also an effective step.

Further, one must watch out for ratings or reviews that are unreasonably favorable. Additionally, one needs to assess the authority of the source advertising the goods on social media. Looking for trusted businesses, authoritative websites, and verified accounts is essential along with being aware of accounts or websites with dubious credentials or a lack of openness.

Read more about social media on:

https://brainly.com/question/23976852

#SPJ4

The sequence that represents the relationship between temperature and volume as explained by the kinetic-molecular theory is higher temperature/ more kinetic energy/ more space between particles/ higher volume

The kinetic theory of matter can be described as the theory that  stressed that all matter is made of small particles  and thses particules are seen to be in random motion  with some space between them.

It should be noted that the theory help us to know about matters in their differnt forms such as liquid, solid and gas and the relationshipto temperture and parameters.

Learn more about kinetic-molecular theory at:

https://brainly.com/question/1274627

#SPJ1

Answer:

A.

Explanation:

The selectivity of a promoted reaction versus an unpromoted reaction can depend on the location, orientation, and shape of the active sites within the zeolite cavities, as well as the size and shape of the reactant molecules.

The shape of the Na-Y zeolite cavities can affect product selectivity.

Na-Y zeolites are characterized by their uniform, microporous structure, which consists of interconnected channels and cages of fixed sizes. These cavities can act as molecular sieves, selectively allowing smaller molecules to pass through while restricting the movement of larger ones. The size and shape of the cavities can determine which molecules can enter and interact with the active sites on the catalyst surface.

In the case of 2-bromotoluene and 4-bromotoluene, since they have similar sizes, they can enter and leave the zeolite with approximately equal ability. However, the location and orientation of the active sites within the cavities can affect the reaction pathway and product selectivity. For example, if the active sites are located in a cavity that is more accessible to 2-bromotoluene than to 4-bromotoluene, then the promoted reaction may favor the production of products that arise from the 2-bromotoluene pathway.

Similarly, if the cavities have different shapes, such as one cavity being more elongated or twisted than the other, the selectivity may be affected by how the reactants and intermediates fit within the cavity. For instance, a more elongated cavity may favor reactions that occur along a linear pathway, whereas a twisted cavity may promote reactions that involve more complex rearrangements.

The selectivity of a promoted reaction versus an unpromoted reaction can depend on the location, orientation, and shape of the active sites within the zeolite cavities, as well as the size and shape of the reactant molecules.

Learn more about Na-Y cavities reaction

brainly.com/question/24240768

#SPJ11

Corrosion cells are a condition on a metal surface in which a flow of electric current occurs between the metal surface and an electrolyte with which it is in contact sufficient to cause the metal to degrade.

In a corrosion cell, electrons flow from the anode to the cathode through the metallic path. Therefore, the correct answer to the question is

B) anode to the cathode through the metallic path.

In the corrosion cell, metal ions formed from metal oxidation (cations) migrate from the anode to the cathode through the electrolyte. The electrons given off by this oxidation reaction move from the anode to the cathode through the electrical connection.

to know more about Corrosion cells click this link-

brainly.com/question/30800443

#SPJ11

Ni²⁺ is the only ion on the list that can exist as both a high-spin and a low-spin octahedral complex. So, the correct answer is B. Ni²⁺.

An electrostatic model called the crystal field theory (CFT) assumes that the metal-ligand connection is ionic and results only from electrostatic interactions between the metal ion and the ligand. When dealing with anions, ligands are viewed as point charges, and when dealing with neutral molecules, as dipoles.

The crystal field splitting theory predicts that some transition metal ions can exist as either high-spin or low-spin octahedral complexes, depending on the magnitude of the crystal field splitting parameter (Δ) relative to the pairing energy (P).

Of the ions listed, the only one that could exist as either a high-spin or a low-spin octahedral complex is Ni²⁺ (B).

Mn²⁺ (A) is a d⁵ ion and will always form a high-spin octahedral complex due to its large number of unpaired electrons.

Sc³⁺ (C) is a d⁰ ion and does not form octahedral complexes with ligands.

Cu²⁺ (D) is a d⁹ ion and typically forms a low-spin octahedral complex due to the stability of the half-filled d⁹ configuration.

Zn²⁺ (E) is a d¹⁰ ion and does not have any unpaired electrons to undergo spin pairing, so it will always form a low-spin octahedral complex.

Therefore, the correct answer is B) Ni²⁺.

Learn more about crystal field theory on:

https://brainly.com/question/23840749

#SPJ11

The mass ooff magnesium is 0.0371 g, under the condition that to evolve 80 mL of H₂ at STP.
To calculate the mass of magnesium necessary to evolve 80 mL of H₂ at STP, we can use the equation
PV = nRT
Here
P = pressure,
V = volume,
n = number of moles,
R = gas constant,
T = temperature.
At STP, the pressure is 1 atm and the temperature is 273 K. Hence the volume of 80 mL can be converted to 0.08 L.
The number of moles of hydrogen gas produced can be evaluated as
n(H₂H₂2) = (PV) / (RT)
= (1 atm * 0.08 L) / ([tex]0.08206 L atm mol^{-1 }K^{-1} * 273 K[/tex])
= 0.00306 mol

Now, according to the balanced chemical equation for the reaction between magnesium and hydrochloric acid
Mg + 2HCl → MgCl₂ + H₂
One mole of magnesium reacts with two moles of hydrochloric acid to produce one mole of hydrogen gas. Then, we need half as many moles of magnesium as we have moles of hydrogen gas.
n(Mg) = n(H₂) /2
= 0.00306 mol / 2
= 0.00153 mol
The given molar mass of magnesium is approximately 24.31 g/mol.
Finally
mass(Mg) = n(Mg) * M(Mg)
= 0.00153 mol * 24.31 g/mol
≈ 0.0371 g

To learn more about mass
https://brainly.com/question/86444
#SPJ4

The best method for the synthesis of isobutyl bromide from t-butyl chloride is a nucleophilic substitution which is option A) 1. NaOH 2. HBr.

This is a nucleophilic substitution reaction, where the hydroxide ion (from NaOH) attacks the t-butyl chloride molecule, resulting in the formation of an intermediate t-butyl hydroxide. This intermediate then reacts with HBr to form isobutyl bromide. This method is effective because it avoids the formation of unwanted side products and is a straightforward two-step process. Option B involves the use of methoxide ion, which is a strong base and can result in elimination reactions. Option C involves the use of strong acid and heat, which can also lead to elimination reactions. Option D involves the use of an organic peroxide (ROOR), which can be dangerous to handle. Option E involves the use of NBS and hv (light), which can lead to the formation of unwanted side products. The correct answer is option A.

More on nucleophilic substitution: https://brainly.com/question/15970188

#SPJ11

The correct form of the zero-order integrated rate law for one reactant is: c. 1[A]t - 1[A]0 = kt

Here, [A]t represents the concentration of the reactant at time t, [A]0 is the initial concentration of the reactant, and k is the rate constant.

the correct form of the zero-order integrated rate law for one reactant is [A] = -kt + [A0], where [A] is the concentration of the reactant, k is the rate constant, and [A0] is the initial concentration12. This equation describes a linear plot of [A] versus t, with a slope of -k and a y-intercept of [A0]1.

Therefore, out of the options given, only option a. ln[A]t - ln[A]0 = kt is correct. Option b. ln[A]0[A]t = kt and option c. 1[A]t - 1[A]0 = kt are incorrect forms of the zero-order integrated rate law.

to learn more about integrated rate law click here:

brainly.com/question/30379408

#SPJ11

The basic subunit of elements is atoms. Therefore the correct option is option C.

An atom is the smallest unit of an element that retains the chemical properties of that element. It consists of a nucleus, which contains protons and neutrons, and electrons, which orbit the nucleus. The number of protons in an atom's nucleus determines its atomic number and defines the element to which it belongs.

Molecules, on the other hand, are formed when two or more atoms combine chemically. So while molecules can be made up of atoms, atoms themselves are the basic building blocks of elements. Therefore the correct option is option C.

For such more question on atoms:

https://brainly.com/question/6258301

#SPJ11

The correct answer is: the total enthalpy is constant from the freestream to the combustor entrance.
In a supersonic ramjet engine, air is decelerated and compressed by an inlet before entering the combustion chamber at very low speed. The air then reacts with fuel and is expelled by a nozzle.

If we assume all processes are adiabatic except for the combustion chamber, which of the following statements is true?
The correct answer is: the total enthalpy is constant from the freestream to the combustor entrance.
Enthalpy is a thermodynamic property that represents the total energy of a system, including both its internal energy and the work required to maintain its pressure and volume. In an adiabatic process, where there is no heat transfer, the total enthalpy remains constant.
In the case of a supersonic ramjet engine, the total enthalpy is constant from the freestream to the combustor entrance. This is because the air is compressed by the inlet, which increases its internal energy and enthalpy. As the air enters the combustion chamber, fuel is added and combustion takes place, which further increases the enthalpy of the air-fuel mixture. However, since the combustion chamber is not adiabatic, there is heat transfer from the combustion products to the surroundings, which decreases the enthalpy of the air-fuel mixture. As a result, the total enthalpy of the mixture remains constant from the freestream to the combustor entrance.
After leaving the combustor, the air-fuel mixture expands through a nozzle, which further decreases its enthalpy. However, since the nozzle is also adiabatic, the total enthalpy of the mixture remains constant from the combustor entrance to the exhaust.

for more such questions on   compressed

https://brainly.com/question/27096986

#SPJ11

We must first ascertain the molar masses of the three potential products in equations 1-3 in order to compute the predicted mass.

When we have these numbers, we may multiply each molar mass by the number of moles of reactant present in each scenario to determine the predicted mass.

The molar masses of the products may be found by examining the coefficients of the reactants and products in each chemical equation, assuming that we have balanced chemical equations for each reaction.

The molar mass of water (H₂O), for instance, is 18 g/mol (2 hydrogen atoms with a molar mass of 1 g/mol each, plus one oxygen atom with a molecular mass of 16 g/mol), as shown by the equation 1:

2H₂ + O₂ ⇔ 2H₂OW.

The molar masses of the other two products in equations 2 and 3 may also be found in a similar manner. We may multiply each by the number of moles of reactant in each case once we know their molar masses.

For instance, if equation 1 predicts the reaction of 2 moles of hydrogen gas (H₂) to generate 4 moles of water (2 moles of H₂O for each mole of H₂). The estimated mass of 72 grams is obtained by multiplying the molar mass of water (18 g/mol) by the anticipated number of moles (4).

Using the proper molar mass and number of moles of reactant to get the anticipated mass, we can repeat this process for each of the three potential reactions.

Know more about molar mass:

https://brainly.com/question/30640134

#SPJ12

The given statement " When ionic bonds form, they produce individual molecules, each of which consists of a fixed number of positive and negative ions" is false because  they produce a crystal lattice structure, in which each positive ion is surrounded by a fixed number of negative ions, and vice versa.

When ionic bonds form, they produce a crystal lattice structure, in which each positive ion is surrounded by a fixed number of negative ions, and vice versa.

The lattice structure extends indefinitely in all directions, forming a solid compound. Therefore, ionic compounds do not exist as discrete molecules with a fixed number of ions.

For such more question on molecules:

https://brainly.com/question/475709

#SPJ11

Penicillin is stable for 24 hours in aqueous solution having a pH of 6.5
in this case is chemical Incompatibility given

Penicillin is a drug that is known to be pH sensitive. In this scenario, the stability of penicillin in an aqueous solution is dependent on the pH level of the solution. Penicillin is stable for 24 hours in an aqueous solution with a pH of 6.5, but at a pH of 3.5, it quickly degrades in less than an hour. This means that the chemical makeup of the penicillin is altered at a pH of 3.5, resulting in its degradation

The incompatibility of penicillin is due to its chemical sensitivity to pH. It is important to note that any medication that is pH sensitive must be stored and administered in a manner that ensures the pH level is within the acceptable range to maintain its stability and effectiveness.

To know more about pH visit:

brainly.com/question/28580519

#SPJ11

The molecular formula of a compound having an empirical formula [tex]NH_2[/tex] (Molecular weight = 32.05 g/mol) could be [tex]N_2H_4[/tex].

To find the molecular formula of a compound with the given empirical formula ([tex]NH_2[/tex]), we will follow these steps:
1. Determine the molar mass of the empirical formula.
2. Divide the given molar mass of the compound by the molar mass of the empirical formula.
3. Multiply the empirical formula by the obtained ratio to get the molecular formula.
Step 1: Calculate the molar mass of the empirical formula [tex]NH_2[/tex]:
N = 14.01 g/mol (nitrogen)
H = 1.01 g/mol (hydrogen)
Molar mass of [tex]NH_2[/tex] = 14.01 + (2 x 1.01) = 16.03 g/mol
Step 2: Divide the given molar mass (32.05 g/mol) by the molar mass of the empirical formula (16.03 g/mol):
32.05 / 16.03 ≈ 2
Step 3: Multiply the empirical formula ([tex]NH_2[/tex]) by the obtained ratio (2) to get the molecular formula:
[tex]N_2H_4[/tex]

To learn more about molecular formula click here https://brainly.com/question/28647690

#SPJ11

Talc, a mineral found in baby powder, is composed of 19.2% Mg. 29.6%

Si, 42.2% O, and 9.0% H. Mg[tex]_3[/tex]Si[tex]_4[/tex]O[tex]_{10}[/tex] (OH)[tex]_2[/tex] is the empirical formula.

The definition of an empirical formula for a compound is one that displays the ratio of the components present in the complex but not the precise number of atoms in the molecule. Subscripts are used next for the element symbols to indicate the ratios.

The subscripts in the empirical formula, which represent the ratio of the elements, are the smallest whole integers, making it additionally referred to as the simplest formula.

Mg=  19.2/24 = 0.878mol

Si =  29.6%/56 = 1.175mol

O = 42.2/16 = 2.638mol

H= 9.0/1=9

Mg = 0.878/0.878 = 1

Si  = 1.175/0.878 = 1.34

O = 2.638/0.878 = 3.004

H= 9/0.878= 8.5

The empirical formula is Mg[tex]_3[/tex]Si[tex]_4[/tex]O[tex]_{10}[/tex] (OH)[tex]_2[/tex]

To know more about empirical formula, here:

https://brainly.com/question/14044066

#SPJ1

The name of the chemical SnCl2 (aq) is tin (II) chloride. This chemical is commonly used in experiments as a reducing agent and as a source of tin ions. It is a white crystalline solid that dissolves in water to form a clear solution. Tin (II) chloride is also known as stannous chloride or tin dichloride.

In experiments, tin (II) chloride is used as a reducing agent to convert metal ions into their respective metals. It is also used as a source of tin ions in solution. Tin (II) chloride is commonly used in electroplating, as well as in the production of tinplate and tin alloys. It is important to handle this chemical with care as it can be hazardous to human health. Exposure to tin (II) chloride can cause irritation to the eyes, skin, and respiratory system. It is recommended to wear protective gear, such as gloves and a face mask, when handling this chemical. Additionally, tin (II) chloride should be stored in a cool, dry place and kept away from sources of heat and moisture. In summary, SnCl2 (aq) is the chemical name for tin (II) chloride, a commonly used chemical in experiments as a reducing agent and a source of tin ions. It should be handled with care and stored properly to avoid any potential hazards.

Learn more about ions here

https://brainly.com/question/7035607

#SPJ11

A galvanic anode that would NOT be used to provide CP to steel is:.D) Chromium is not commonly used as a galvanic anode for the cathodic protection (CP) of steel. Magnesium, aluminum, and zinc are commonly used galvanic anodes for the CP of steel.

A galvanic anode is a type of sacrificial anode that is used to protect metal structures from corrosion. It is made from a more active metal than the metal being protected, such as zinc, aluminum, or magnesium. When the anode is electrically connected to the metal being protected and immersed in an electrolyte, such as seawater, a galvanic cell is created. This results in the anode corroding instead of the protected metal. As the anode corrodes, it releases electrons that flow through the electrolyte to the metal being protected, preventing it from corroding. Galvanic anodes are commonly used in pipelines, ships, and offshore structures to prevent corrosion.

Galvanic anodes are commonly used as a form of cathodic protection (CP) to protect metallic structures from corrosion. The anode material is more reactive than the metal being protected, and when connected to the structure through a conductive medium, it corrodes preferentially to the protected metal, thereby providing CP.

Magnesium, aluminum, and zinc are all commonly used as galvanic anodes for CP because they are more reactive than steel and corrode preferentially to it. However, chromium is not typically used as a galvanic anode for CP because it is less reactive than steel and would not provide sufficient protection. Instead, chromium is often used as a passive protective coating on steel, as it forms a thin, stable oxide layer that helps to prevent corrosion.

Know more about the galvanic anode

https://brainly.com/question/31563784

#SPJ11

Answer:

The average kinetic energy of a molecule is given by the formula: KE = (3/2)kT

where k is the Boltzmann constant, T is the temperature in kelvin.

To calculate the root-mean-square speed (v_rms) of Ne atoms, we can use the formula: v_rms = √((3kT)/m, where m is the mass of a Ne atom.

First, we need to convert the temperature of NH3 gas to kelvin: T_A = 87°C + 273.15 = 360.15 K

The average kinetic energy of NH3 at this temperature is given as 7.1 × 10−21 J/molecule.

We can rearrange the first formula to solve for k: k = 2/3 * (KE/T)

Substituting the values for KE and T_A, we get:

k_A = 2/3 * (7.1 × 10−21 J/molecule) / 360.15 K

= 3.3 × 10−26 J/K

The mass of a Ne atom is approximately 20 atomic mass units (u) or 3.32 × 10−26 kg.

Substituting the values of k and m into the second formula, we get:

v_rms = √((3kT)/m)

= √((3 * 3.3 × 10−26 J/K * 360.15 K) / (3.32 × 10−26 kg))

= 437.3 m/s (rounded to three significant figures)

Therefore, the root-mean-square speed of Ne atoms in vessel B is approximately 437 m/s at 87°C

Explanation:

For a gas, the two variables that are directly proportional to each other (if all other conditions remain constant) are:

Pressure (p) and temperature (t)

This relationship is described by the ideal gas law, which states that the product of pressure and volume is directly proportional to the product of the number of moles and temperature, when other conditions are constant:

pV = nRT

where:

p is the pressure of the gas

V is the volume of the gas

n is the number of moles of the gas

R is the universal gas constant

T is the temperature of the gas in Kelvin

From this equation, we can see that pressure (p) and temperature (T) are directly proportional to each other, when the other variables are held constant. As the temperature of a gas increases, the pressure of the gas will also increase, assuming all other conditions (such as volume and number of moles) remain constant. Similarly, if the temperature of a gas decreases, the pressure of the gas will also decrease.

To know more about the pressure & temperature refer here :

https://brainly.com/question/30313321#

#SPJ11

The best method to reduce IR drops through the electrolyte is by using galvanic anodes. IR drops refer to the potential drop that occurs within the electrolyte solution due to its resistance.

This drop can significantly affect the performance of the structure, leading to corrosion and reduced efficiency. Galvanic anodes work by generating an electrical current that counteracts the potential drop and prevents corrosion. The anodes are made of a metal with a more negative potential than the metal they are protecting, which results in the anode corroding instead of the structure. This type of protection is commonly used in cathodic protection systems, which are designed to mitigate the effects of corrosion. Other methods such as monthly checkups or changing reference electrodes frequently do not address the root cause of the IR drops and may not provide adequate protection. Therefore, galvanic anodes are the most effective solution for reducing IR drops through the electrolyte.

learn more about the electrolyte Refer: https://brainly.com/question/28699046

#SPJ11

Answer:  Pure substances are substances that are made up of only one kind of particle and have a fixed or constant structure. A mixture is made when two or more substances are combined, but they are not combined chemically. Mixtures and pure substances are similar in that they are both matter, so they are both composed of atoms.

Explanation:

90° ,109.5°, 120°, 180° are the appropriate bond angles between bonding domains that appear in the following molecular geometry.

In molecular geometry, bond angles refer to the angles formed between bonding domains, which include both bonded atoms and lone pairs of electrons. The following molecular geometries exhibit various approximate bond angles:

1. Linear geometry: This occurs when there are two bonding domains around the central atom, resulting in a 180° bond angle. Examples include CO₂ and BeCl₂.

2. Trigonal planar geometry: With three bonding domains, the bond angles are approximately 120°. Molecules such as BF₃ and SO₃ exhibit this geometry.

3. Tetrahedral geometry: This geometry has four bonding domains, leading to bond angles of approximately 109.5°. CH₄ and NH₃ are examples of molecules with tetrahedral geometry.

4. Trigonal bipyramidal geometry: In this case, there are five bonding domains, resulting in bond angles of 90° and 120°. Examples include PCl₅ and SF₄.

5. Octahedral geometry: With six bonding domains, octahedral molecules have bond angles of 90°. Molecules like SF₆ and Cr(CO)₆ exhibit this geometry.

These bond angles can be affected by the presence of lone pairs, which create deviations from ideal bond angles. For instance, water (H₂O) has two lone pairs and a bent geometry, resulting in a bond angle of approximately 104.5° instead of the expected 109.5° in a perfect tetrahedral arrangement.

Hence, 90° ,109.5°, 120°, 180° are all the approximate bond angles.

To know more about bond angles, refer to the link below:

https://brainly.com/question/13751116#

#SPJ11

Complete Question:

The mass balance expression for a saturated solution of Ag₂CO₃ can be written as follows:
Mass of Ag₂CO₃(s) = Mass of Ag₂CO₃(aq) + Mass of H₂O

This equation represents the equilibrium state of a saturated solution of Ag₂CO₃, where the mass of the solid Ag₂CO₃ is equal to the sum of the mass of Ag₂CO₃ in solution and the mass of water present in the solution.

Ag₂CO₃ is sparingly soluble in water and its solubility increases with increasing temperature. However, when the solution becomes saturated, the rate of dissolution is equal to the rate of precipitation, and the concentration of Ag₂CO₃ remains constant.

It is important to note that the mass balance expression only considers the dissolved Ag₂CO₃ and not any subsequent reactions of Ag. This means that any other reactions that may occur after Ag₂CO₃ dissolves in water, such as the formation of silver ions (Ag⁺) or the precipitation of other compounds, are not taken into account.

In summary, the mass balance expression for a saturated solution of Ag₂CO₃ shows the relationship between the mass of solid Ag₂CO₃, the mass of dissolved Ag₂CO₃, and the mass of water in the solution. It provides a useful tool for understanding the behavior of Ag₂CO₃ in solution and can be used to calculate the solubility of the compound under different conditions.

To know more about balance expression, refer to the link below:

https://brainly.com/question/28500291#

#SPJ11

The Bohr model of the atom was a significant step forward in our understanding of atomic structure. However, it was not without its problems. One of the main issues with the Bohr model was that it only worked quantitatively for hydrogen, and not for more complex atoms.

This limitation meant that the model was not able to explain the spectral lines observed in other elements, which were not predicted by the model.

Another problem with the Bohr model was that it did not provide an explanation for why the energies of the electron orbits were quantized. Bohr's model was based on the assumption that electrons can only occupy certain orbits with specific energy levels. However, he did not provide a mechanism to explain why this was the case.

These problems with the Bohr model were later addressed by the development of more sophisticated models, such as the quantum mechanical model. The quantum mechanical model provided a more accurate description of atomic structure, and was able to explain the spectral lines observed in more complex elements. The quantum mechanical model also provided a theoretical basis for the quantization of energy levels in atoms, which was not explained by the Bohr model.

learn more about Bohr model  here: brainly.com/question/14618415

#SPJ11