The formulas for the compounds formed from strontium and the polyatomic ions chlorate, carbonate, and phosphate are Sr(ClO₄)₂, SrCO₃, and Sr₃(PO₄)₂, respectively.
When forming compounds between strontium (Sr) and the polyatomic ions chlorate (ClO₄⁻), carbonate (CO₃²⁻ ), and phosphate ( PO₄³⁻), we need to balance the charges of the cation (Sr) and the anion (polyatomic ion).
1. Strontium chlorate (Sr(ClO₄)₂):
- The chlorate ion has a charge of -1, so we need two of them to balance the charge of the strontium cation (+2).
- The formula for chlorate ion is ClO₄⁻.
- Therefore, the formula for strontium chlorate is Sr(ClO₄)₂
2. Strontium carbonate (SrCO₃):
- The carbonate ion has a charge of -2, so we need one of them to balance the charge of the strontium cation (+2).
- The formula for carbonate ion is CO₃²⁻
- Therefore, the formula for strontium carbonate is SrCO₃.
3. Strontium phosphate (Sr₃(PO₄)₂):
- The phosphate ion has a charge of -3, so we need two of them to balance the charge of the strontium cation (+2).
- The formula for phosphate ion is PO₄³⁻.
- Therefore, the formula for strontium phosphate is Sr₃(PO₄)₂.
In summary, the formulas for the compounds formed from strontium and the polyatomic ions chlorate, carbonate, and phosphate are Sr(ClO₄)₂, SrCO₃, and Sr₃(PO₄)₂, respectively.
To know more about compounds, refer
https://brainly.com/question/14782984
#SPJ11
How many grams of phosphoric acid are produced when 10.0 mol of water react with an excess of P4O10? P4O10 + 6H2O -----------> 4H3PO4
When 10.0 mol of water reacts with an excess of P4O10, approximately 3,919.6 grams of phosphoric acid (H3PO4) will be produced.
To determine the grams of phosphoric acid produced when 10.0 mol of water reacts with an excess of P4O10, we need to use stoichiometry and the balanced equation for the reaction:
P4O10 + 6H2O → 4H3PO4
From the balanced equation, we can see that the stoichiometric ratio between P4O10 and H3PO4 is 1:4. This means that for every mole of P4O10, we obtain four moles of H3PO4.
Given that we have an excess of P4O10, the moles of H3PO4 produced will be determined by the number of moles of water used.
Moles of H3PO4 = 4 × moles of water
Moles of water = 10.0 mol
Moles of H3PO4 = 4 × 10.0 mol = 40.0 mol
To convert moles of H3PO4 to grams, we need to multiply by the molar mass of H3PO4, which is 97.99 g/mol.
Grams of H3PO4 = 40.0 mol × 97.99 g/mol = 3,919.6 g
For more such questions on phosphoric acid
https://brainly.com/question/13030272
#SPJ11
If a substance has a density of 13.6g/mL that is the same as if it has a density of 1.36kg/L. True False
This statement is true. Density is a measure of how much mass is contained in a given volume of a substance. The units of density can be expressed in grams per milliliter (g/mL) or kilograms per liter (kg/L).
Since 1 kg is equal to 1000 g and 1 L is equal to 1000 mL, we can convert between the two units using the following conversions:
1 kg = 1000 g
1 L = 1000 mL
Therefore, we can convert between g/mL and kg/L using the following relationship:
1 g/mL = 1 kg/L
So, if a substance has a density of 13.6 g/mL, it is equivalent to a density of 1.36 kg/L, since both expressions represent the same amount of mass per unit volume of the substance.
Hence, the given statement is true.
Learn more about Density at
brainly.com/question/29775886
#SPJ1
which is the best colored indicator to use in the titration of 0.1 m ch3co2h(aq) with naoh(aq)? why? (ka of ch3co2h
The best colored indicator to use in the titration of 0.1 M CH3CO2H(aq) with NaOH(aq) would be phenolphthalein. This is because the pH range for the equivalence point of this titration falls within the range where phenolphthalein changes color, which is approximately pH 8.2 to 10.0.
Phenolphthalein is a commonly used indicator for acid-base titrations as it changes color in a very distinct manner. It is colorless in acidic solutions and pink in basic solutions. This makes it easy to identify when the equivalence point has been reached in the titration.
The Ka value for CH3CO2H is 1.8 x 10^-5. This indicates that CH3CO2H is a weak acid and will not completely dissociate in water. During the titration, NaOH(aq) will be added to the CH3CO2H(aq) until the equivalence point is reached. At this point, the amount of NaOH added will be equal to the amount of CH3CO2H in the solution, resulting in the formation of CH3CO2Na(aq) and water. The pH at the equivalence point will be approximately 8.2-10.0, which is the range where phenolphthalein changes color.
In conclusion, phenolphthalein would be the best colored indicator to use in the titration of 0.1 M CH3CO2H(aq) with NaOH(aq) due to its pH range for the equivalence point falling within the range where phenolphthalein changes color.
learn more about indicator
https://brainly.com/question/13785316
#SPJ11
which has the smallest dipole-dipole forces? hf ch3 f ph3 h 2 o
When considering dipole-dipole forces, it's important to understand that they are a type of intermolecular force that occurs between polar molecules. These forces arise from the attraction between the partial positive charge on one molecule and the partial negative charge on another.
In order to determine which of the given molecules has the smallest dipole-dipole forces, we need to first consider the polarity of each molecule. The more polar a molecule is, the stronger its dipole-dipole forces will be. HF is a polar molecule with a dipole moment of 1.91 D, making it highly polar. CH3F is also polar, with a dipole moment of 1.85 D. PH3 is polar as well, with a dipole moment of 0.58 D. H2O is highly polar, with a dipole moment of 1.85 D.
Comparing the dipole moments of these molecules, we can see that HF and H2O have the highest dipole moments, indicating that they will have the strongest dipole-dipole forces. CH3F has a slightly lower dipole moment than HF and H2O, but it is still polar and will have moderate dipole-dipole forces. Finally, PH3 has the smallest dipole moment, indicating that it will have the weakest dipole-dipole forces of the given molecules.
Learn more about forces here:
https://brainly.com/question/13191643
#SPJ11
The molecule with the smallest dipole-dipole forces among the given options is CH3F (methyl fluoride).
PH3 has the smallest dipole-dipole forces among the given molecules due to its low polarity resulting from the less electronegative phosphorus atom.
PH3 is called phosphine and it is quite toxic and flammable. PH3 must be polar since it is not symmetrical. PH3 has a lone pair and does not have a trigonal planar geometry--for this reason it is not symmetrical. The dipole moment of phosphine is 0.58D which is less than 1.42D for NH3.
Dipole-dipole forces arise due to the presence of a permanent dipole moment in a molecule. The magnitude of the dipole-dipole forces depends on the polarity of the molecule, which is determined by the electronegativity difference between the atoms in the molecule.
Out of the given molecules, PH3 has the smallest dipole moment because phosphorus is less electronegative than the other atoms. Thus, the polarity of PH3 is the smallest, and it has the weakest dipole-dipole forces.
In summary, PH3 has the smallest dipole-dipole forces among the given molecules due to its low polarity resulting from the less electronegative phosphorus atom.
To know more about dipole-dipole forces visit:
https://brainly.com/question/9279925
#SPJ11
Given that E o = 0.52 V for the reduction Cu+(aq) + e− → Cu(s), calculate E o , ΔG o , and K for the following reaction at 25°C: 2Cu+(aq) ⇌ Cu2+(aq) + Cu(s)
25°C, the standard cell potential for the reaction 2Cu+(aq) ⇌ Cu2+(aq) + Cu(s) is 0.18 V, the standard Gibbs free energy change is -35,023 J/mol, and the equilibrium constant is 5.4 × 10^17.
The overall reaction is the sum of two half-reactions:
Cu+(aq) + e− → Cu(s) E° = 0.52 V
Cu2+(aq) + 2e− → Cu(s) E° = 0.34 V
To find the standard cell potential for the reaction, we can subtract the second half-reaction from the first one:
Cu+(aq) + e− → Cu(s) E° = 0.52 V
Cu2+(aq) + 2e− → Cu(s) E° = 0.34 V
2Cu+(aq) → Cu2+(aq) + Cu(s) E° = 0.52 V - 0.34 V = 0.18 V
The standard Gibbs free energy change for the reaction can be calculated using the equation:
ΔG° = -nFE°
where n is the number of moles of electrons transferred in the reaction and F is the Faraday constant (96,485 C/mol).
In this case, n = 2 (because two electrons are transferred) and:
ΔG° = -2 × 96,485 C/mol × 0.18 V = -35,023 J/mol
Finally, we can use the equation:
ΔG° = -RT ln K
where R is the gas constant (8.314 J/(mol·K)), T is the temperature in kelvins (25°C = 298 K), and K is the equilibrium constant.
Solving for K, we get:
K = e^(-ΔG°/RT) = e^(-(-35,023 J/mol)/(8.314 J/(mol·K) × 298 K)) = 5.4 × 10^17
Therefore, at 25°C, the standard cell potential for the reaction 2Cu+(aq) ⇌ Cu2+(aq) + Cu(s) is 0.18 V, the standard Gibbs free energy change is -35,023 J/mol, and the equilibrium constant is 5.4 × 10^17.
Learn more about reaction here:
https://brainly.com/question/17434463
#SPJ11
which of the following compounds can exhibit linkage isomerism? a. [ni(nh3)6]2 b. [cr(co)3(nh3)3]3 c. [cr(h2o)4br2] d. [fe(co)5ono]2 e. [cr(h2o)4br2]
Linkage isomerism is a type of isomerism exhibited by coordination compounds where the ligand can bind to the central metal ion through different atoms.
Out of the given options, compounds c and e can exhibit linkage isomerism as they contain the same ligands, i.e., four water molecules and two bromide ions, but the bromide ions can bind to the central chromium ion either through the two different bromine atoms.
In contrast, the other compounds do not contain such ligands that can show linkage isomerism.
[Ni(NH3)6]2 contains only one type of ligand, i.e., NH3.
Similarly, [Cr(CO)3(NH3)3]3, and [Fe(CO)5ONO]2 also have a single type of ligand attached to the metal ion. Therefore, compounds c and e are the only compounds that can exhibit linkage isomerism out of the given options.
To know more about isomerism. please visit.....
brainly.com/question/17569347
#SPJ11
a sealed container contains a mixture of oxygen and nitroggen gas the ratio between average kinetic enegy of oxygen molcules is
The ratio between the average kinetic energies of oxygen and nitrogen molecules is 8:7.
The average kinetic energy of a gas is directly proportional to its temperature. The temperature of the gas mixture is assumed to be constant since the container is sealed. Therefore, the ratio of the average kinetic energies of oxygen and nitrogen molecules is equal to the ratio of their respective temperatures.
The ratio of the molecular masses of oxygen and nitrogen is 32:28 or 8:7. According to the equipartition theorem, each degree of freedom contributes (1/2)kT to the average kinetic energy of the molecule, where k is the Boltzmann constant and T is the absolute temperature.
Oxygen and nitrogen molecules have the same number of degrees of freedom, which is 3 for a monatomic gas. Therefore, the ratio of the average kinetic energies of oxygen and nitrogen molecules is:
(3/2)kT(O₂)/(3/2)kT(N₂) = T(O₂)/T(N₂)
Since the temperature is assumed to be constant, the ratio of the average kinetic energies of oxygen and nitrogen molecules is equal to the ratio of their molecular masses:
T(O₂)/T(N₂) = 8/7
To learn more about kinetic enegy click on,
https://brainly.com/question/9576283
#SPJ4
Citric acid (CHO), a component of fruit drinks, jams, and jellies, is produced using the
following reaction:
C12H22O11 + H₂O + 30₂ → 2C6H₂O₂ + 4H₂O
If a fruit drink manufacturer decides she needs 2.8 x 105 moles of citric acid, what is the
minimum amount of reactants she will need?
which one of the following conditions is always true for a titration of a weak acid with a strong base? the equivalence point occurs at a ph equal to 7. if a colored indicator is used, it must change color rapidly in the weak acid's buffer region. a colored indicator with a pka less than 7 should be used. equal volumes of weak acid and strong base are required to reach the equivalence point. the equivalence point occurs at a ph greater than 7.
The correct option is D, The equivalence point occurs at a pH greater than 7 for a titration of a weak acid with a strong base. This is because the strong base will react with the weak acid to form a salt and water.
Titration is a commonly used analytical technique in chemistry for determining the concentration of an unknown solution by adding a known amount of a standardized solution of known concentration. The process involves slowly adding the standardized solution to the unknown solution until the chemical reaction between the two is complete. The point at which the reaction is complete is known as the equivalence point and can be detected using various indicators that change color or other properties at this point.
The main aim of titration is to accurately measure the concentration of a particular substance in a solution. For example, an acid-base titration can be used to determine the concentration of an acid in a solution by adding a known amount of a strong base until the equivalence point is reached. Similarly, a redox titration can be used to determine the concentration of a reducing or oxidizing agent in a solution.
To know more about Titration refer to-
brainly.com/question/31483031
#SPJ4
a buffer solution is 0.470 m in a weak acid (a=1.8×10−6) and 0.210 m in its conjugate base, what is the ph?
The pH of the buffer solution is approximately 0.395.
To solve the overall question, we need to calculate the pH of the buffer solution given that it is 0.470 M in a weak acid with a Ka of 1.8×10^−6 and 0.210 M in its conjugate base.
First, we need to find the pKa value by taking the negative logarithm of the acid dissociation constant (Ka):
pKa = -log10(1.8×10^−6)
Next, we can use the Henderson-Hasselbalch equation to calculate the pH:
pH = pKa + log10([conjugate base]/[weak acid])
pH = pKa + log10(0.210/0.470)
Substituting the value of pKa and evaluating the logarithm:
pH = -log10(1.8×10^−6) + log10(0.447)
We can simplify this expression by subtracting the logarithms:
pH = log10(0.447/1.8×10^−6)
Now, let's evaluate the division inside the logarithm:
pH = log10(248.33×10^6)
Finally, calculating the logarithm:
pH ≈ log10(2.4833) ≈ 0.395
Therefore, the pH of the buffer solution is approximately 0.395.
Know more about Buffer solution here:
https://brainly.com/question/31428923
#SPJ11
Write and balance the following single
replacement reaction.
e) Cu + H₂SO4 →
Answer:
The balanced chemical equation for the single replacement reaction between copper (Cu) and sulfuric acid (H₂SO4) is:
Cu + H₂SO4 → CuSO4 + H2
Explanation:
In this reaction, copper reacts with sulfuric acid to form copper(II) sulfate and hydrogen gas. The copper replaces the hydrogen in the sulfuric acid compound, resulting in the formation of copper(II) sulfate and hydrogen gas. The equation is balanced because there are equal numbers of atoms of each element on both sides of the arrow.
Predict what the new boiling point of water will be if you add 0.125 kg of |NaCl solute to 750 g of water (Kb of water = 0.51°C/m). ? a.101.45°C b. 98.55°C c. 102.91°C d.97.09°C
The new boiling point of the NaCl solution is 102.91°C when 0.125 kg of NaCl is added to 750 g of water, assuming the boiling point elevation constant (Kb) of water is 0.51°C/m.
To find the new boiling point of the solution, we can use the formula:
ΔTb = Kb × m
where ΔTb is the change in boiling point, Kb is the boiling point elevation constant (0.51°C/m for water), and m is the molality of the solute.
First, we need to calculate the molality of the NaCl solution:
m = (moles of solute) / (mass of solvent in kg)
The molar mass of NaCl is 58.44 g/mol, so 0.125 kg of NaCl is:
moles of NaCl = (0.125 kg) / (58.44 g/mol) = 2.14 mol
The mass of the solvent (water) is 750 g, which is 0.75 kg.
So, the molality of the NaCl solution is:
m = (2.14 mol) / (0.75 kg) = 2.85 mol/kg
Now we can use the formula to calculate the change in boiling point:
ΔTb = Kb × m = (0.51°C/m) × (2.85 mol/kg) = 1.454°C
Finally, we can find the new boiling point of the solution by adding the change in boiling point to the normal boiling point of water (100°C):
New boiling point = 100°C + 1.454°C = 101.454°C
Therefore, the correct answer is c. 102.91°C.
The new boiling point of the NaCl solution is 102.91°C when 0.125 kg of NaCl is added to 750 g of water, assuming the boiling point elevation constant (Kb) of water is 0.51°C/m.
To know more about boiling point, visit;
https://brainly.com/question/40140
#SPJ11
write down the expression for the arrhenius equation and indicate how this can be used to determine the activation energy of a reactions
The Arrhenius equation relates the rate constant (k) of a chemical reaction to temperature (T), activation energy (Ea), and a pre-exponential factor (A).
The equation is given by:
k = A * exp(-Ea/RT)
where:
k is the rate constant
A is the pre-exponential factor or frequency factor
Ea is the activation energy of the reaction
R is the gas constant (8.314 J/(mol*K))
T is the temperature in Kelvin
To determine the activation energy of a reaction using the Arrhenius equation, one can measure the rate constant at different temperatures, and plot the natural logarithm of the rate constant (ln k) against the inverse of the temperature (1/T). This results in a straight line with a slope of -Ea/R. By measuring the slope of the line, the activation energy can be determined.
The Arrhenius equation can also be used to predict the effect of temperature on the rate of a reaction. As the temperature increases, the exponential term in the equation becomes larger, resulting in a larger rate constant and faster reaction rate. This is because higher temperatures increase the fraction of reactant molecules with sufficient energy to overcome the activation energy barrier and participate in the reaction.
Learn more about Arrhenius equation here:
https://brainly.com/question/30505650
#SPJ11
what is the [oh - ] in a sample of the great salt lake if the ph is 8.25?
The [OH-] concentration in the sample of the Great Salt Lake with a pH of 8.25 is approximately 1.78 × 10^(-6) M.
To calculate the [OH-] concentration in a sample of the Great Salt Lake, we can use the relationship between pH and pOH.
The pH of a solution is defined as the negative logarithm (base 10) of the hydrogen ion concentration ([H+]), and the pOH is defined as the negative logarithm (base 10) of the hydroxide ion concentration ([OH-]). The sum of the pH and pOH is always equal to 14.
Given that the pH is 8.25, we can find the pOH by subtracting the pH from 14:
pOH = 14 - 8.25 = 5.75
Since the pH and pOH together must add up to 14, we can use this relationship to calculate the [OH-] concentration:
[OH-] = 10^(-pOH) = 10^(-5.75)
Using a calculator, we find that [OH-] ≈ 1.78 × 10^(-6) M.
Therefore, the [OH-] concentration in the sample of the Great Salt Lake with a pH of 8.25 is approximately 1.78 × 10^(-6) M.
Know more about pH here:
https://brainly.com/question/2288405
#SPJ11
If the solubility product of Mn(OH)2be 1.9×10−13at 25∘C, then what is the pOH of a saturated aqueous solution of Mn(OH)2at that temperature?
The pOH of a saturated aqueous solution of Mn(OH)₂ at 25°C is 6.5 + 0.5log(S), where S is the solubility of Mn(OH)₂ in mol/L.
The solubility product expression for Mn(OH)₂ is given by;
Mn(OH)₂(s) ⇌ Mn²⁺(aq) + 2OH⁻(aq)
The solubility product constant (Ksp) expression for this reaction will be;
Ksp = [Mn²⁺][OH⁻]₂
Since the solution is saturated with Mn(OH)₂, the concentration of Mn²⁺ and OH⁻ will be equal to the solubility (S) of Mn(OH)₂. Thus, we can write;
Ksp = S(Mn²⁺) x S(OH⁻)₂
Substituting the given value of Ksp, we get;
1.9×10⁻¹³ = S(Mn²⁺) x S(OH⁻)₂
Since Mn(OH)₂ is a sparingly soluble salt, we can assume that the concentration of Mn²⁺ ions produced by the dissociation of Mn(OH)₂ is negligible compared to the initial concentration of OH⁻ ions. Therefore, we can approximate [OH⁻] as the square root of Ksp divided by S.
[OH⁻] = √(Ksp/S)
[OH⁻] = √(1.9×10⁻¹³/S)
Now, we know that pH + pOH = 14 at 25°C.
pOH = -log[OH⁻]
pOH = -log(√(1.9×10⁻¹³/S))
pOH = -0.5log(1.9×10⁻¹³/S)
pOH = -0.5(log(1.9×10⁻¹³) - log(S))
pOH = 6.5 + 0.5log(S)
Therefore, the pOH is 6.5 + 0.5log(S).
To know more about solubility product here
https://brainly.com/question/31781392
#SPJ4
what are the approximate bond angles in this substance? nicl2
The approximate bond angles in NiCl2 are around 109.5 degrees.The bond angles in NiCl2 are influenced by the sp hybridization of the nickel atom and the repulsion of the lone pair on the metal center.
NiCl2 adopts a linear geometry due to the sp hybridization of the nickel atom. Each Ni-Cl bond has an approximate bond angle of 180 degrees. The Cl-Ni-Cl bond angle is determined by the lone pair repulsion on the nickel atom, causing a slight deviation from linearity. The electron geometry of NiCl2 is linear, and the molecular geometry is also linear. According to VSEPR theory, the lone pair on the nickel atom creates an electronic repulsion, leading to a bond angle of approximately 109.5 degrees.
The bond angles in NiCl2 are influenced by the sp hybridization of the nickel atom and the repulsion of the lone pair on the metal center. This leads to a slightly bent molecular geometry with a bond angle of around 109.5 degrees.
Learn more about Bond Angles, here:
https://brainly.com/question/25425872
#SPJ11
in the reaction 2cs(s) cl2(g) → 2cscl(s), cl2 isA) the reducing agent. B) the oxidizing agent. D) the electron donor. E) two of these C) oxidized
In the reaction 2Cs(s) + Cl₂(g) → 2CsCl(s), Cl₂ is the oxidizing agent (Option B).
In the reaction, chlorine (Cl₂) is being reduced (gaining electrons) as it reacts with the sulfur (S) in the solid compound (CS), resulting in the formation of the ionic compound, CsCl.
Cs (cesium) loses an electron and gets oxidized to Cs⁺. Cl₂ (chlorine) gains an electron and gets reduced to Cl-.Since Cl₂ is accepting the electron, it acts as an oxidizing agent.Therefore, chlorine is the oxidizing agent, meaning it is causing the oxidation (loss of electrons) of the sulfur.
Learn more about oxidizing agent: https://brainly.com/question/10547418
#SPJ11
g when 25.0 ml of solvent are added to an unknown volume of a 1.75 m stock solution, the concentration of the resulting solution is 0.550 m. calculate the unknown volume (in ml) of stock solution
When 25.0 ml of solvent were added to unknown volume of 1.75 m stock solution, the concentration of resulting solution is 0.550 m. Then, the unknown volume of the stock solution is 11.46 mL.
To solve this problem, we use the formula for dilution;
M₁V₁ = M₂V₂
where M₁ is the initial concentration, V₁ is the initial volume, M₂ is the final concentration, and V₂ is the final volume.
Plugging in the given values, we get:
1.75 M × V₁ = 0.550 M × (25.0 mL + V₁)
Simplifying and solving for V₁, we get;
1.75 M × V₁ = 0.550 M × 25.0 mL + 0.550 M × V₁
1.75 M × V₁ - 0.550 M × V₁ = 0.550 M × 25.0 mL
1.20 M × V₁ = 13.75 mL
V₁ = 11.46 mL
Therefore, the unknown volume of the stock solution is 11.46 mL.
To know more about stock solution here
https://brainly.com/question/17018950
#SPJ4
Potassium metal reacts with chlorine gas to form solid potassium chloride. Answer the following:
Write a balanced chemical equation (include states of matter)
Classify the type of reaction as combination, decomposition, single replacement, double replacement, or combustion
If you initially started with 78 g of potassium and 71 grams of chlorine then determine the mass of potassium chloride produced.
The 149.2 grams of potassium chloride would be produced if 78 grams of potassium and 71 grams of chlorine completely reacted.
The balanced chemical equation for the reaction between potassium metal (K) and chlorine gas (Cl₂) to form solid potassium chloride (KCl) is:
2K(s) + Cl₂(g) → 2KCl(s)
This equation indicates that two atoms of potassium react with one molecule of chlorine gas to yield two molecules of potassium chloride.
The type of reaction is a combination reaction, also known as a synthesis reaction. In this type of reaction, two or more substances combine to form a single product.
To determine the mass of potassium chloride produced, we need to calculate the limiting reactant. The molar mass of potassium is approximately 39.1 g/mol, and the molar mass of chlorine is approximately 35.5 g/mol.
First, we convert the given masses of potassium (78 g) and chlorine (71 g) into moles by dividing them by their respective molar masses:
Moles of potassium = 78 g / 39.1 g/mol = 2 mol
Moles of chlorine = 71 g / 35.5 g/mol ≈ 2 mol
Since the reactants have a 1:1 stoichiometric ratio, it can be seen that both potassium and chlorine are present in the same amount. Therefore, the limiting reactant is either potassium or chlorine.
Assuming potassium is the limiting reactant, we can calculate the mass of potassium chloride produced. Since 2 moles of potassium react to form 2 moles of potassium chloride, we can use the molar mass of potassium chloride (74.6 g/mol) to calculate the mass:
Mass of potassium chloride = 2 mol × 74.6 g/mol = 149.2 g
For more such questions on potassium chloride
https://brainly.com/question/24879357
#SPJ11
a 40.0 ml sample of 0.150 m ba(oh)2(aq) is titrated with 0.420 m hno3(aq). calculate the volume of hno3(aq) equired to reach the equivalence point in this titration.
Approximately 29 mL of 0.420 M HNO3(aq) is required to reach the equivalence point in this titration.
To determine the volume of 0.420 M HNO3(aq) required to reach the equivalence point in the titration of a 40.0 ml sample of 0.150 M Ba(OH)2(aq), we need to consider the stoichiometry of the reaction between Ba(OH)2 and HNO3.
The balanced equation for the reaction is:
Ba(OH)2 + 2HNO3 → Ba(NO3)2 + 2H2O
From the balanced equation, we can see that one mole of Ba(OH)2 reacts with two moles of HNO3. Therefore, the moles of HNO3 required can be calculated using the equation:
moles of HNO3 = (moles of Ba(OH)2) x 2
The moles of Ba(OH)2 can be calculated using the formula:
moles of Ba(OH)2 = (concentration of Ba(OH)2) x (volume of Ba(OH)2)
Plugging in the values given:
moles of Ba(OH)2 = (0.150 mol/L) x (0.040 L) = 0.006 mol
Now we can calculate the moles of HNO3 required:
moles of HNO3 = (0.006 mol) x 2 = 0.012 mol
To calculate the volume of HNO3(aq) required, we can use the formula:
volume of HNO3 = (moles of HNO3) / (concentration of HNO3)
Plugging in the values given:
volume of HNO3 = (0.012 mol) / (0.420 mol/L) ≈ 0.029 L
Converting the volume to milliliters:
volume of HNO3 ≈ 0.029 L x 1000 mL/L ≈ 29 mL
Therefore, approximately 29 mL of 0.420 M HNO3(aq) is required to reach the equivalence point in this titration.
Know more about Titration here:
https://brainly.com/question/31870069
#SPJ11
A marshmallow peep contains 0.16-L at STP. The marshmallow peep is then placed in a vacuum and the pressure is reduced to 0.43 atm. What is the new volume of the marshmallow peep?
Which of the following can act as an acid only according to both Arrhenius Acid-Base Theory and Bronsted-Lowry Acid-Base Theory?
(A) H3PO4 (B) Na2CO3 (C) KHCO3 (D) Na2HPO4
Only H3PO4 can act as an acid according to both Arrhenius Acid-Base Theory and Bronsted-Lowry Acid-Base Theory. Arrhenius theory defines an acid as a substance that produces H+ ions in water, while a base produces OH- ions. Bronsted-Lowry theory defines an acid as a substance that donates a proton (H+) to another substance, while a base accepts a proton.
H3PO4 is able to donate a proton in both theories, making it the only option that can act as an acid according to both.
The compound that can act as an acid only according to both Arrhenius Acid-Base Theory and Bronsted-Lowry Acid-Base Theory is (A) H3PO4. In the Arrhenius Theory, an acid is a substance that releases H+ ions in aqueous solutions, while in the Bronsted-Lowry Theory, an acid is a proton donor.
H3PO4, also known as phosphoric acid, can donate protons (H+ ions) in both theories, while the other compounds (B) Na2CO3, (C) KHCO3, and (D) Na2HPO4 cannot act as acids in both theories, as they do not donate protons but instead may act as bases or salts.
To know more about acid visit-
https://brainly.com/question/14072179
#SPJ11
H3PO4 can act as an acid only according to both Arrhenius Acid-Base Theory and Bronsted-Lowry Acid-Base Theory. It donates a hydrogen ion (H+) to a base, forming the conjugate base H2PO4-. Na2CO3, KHCO3, and Na2HPO4 can act as bases according to the Bronsted-Lowry Acid-Base Theory but not according to the Arrhenius Acid-Base Theory, as they do not produce H+ ions when dissolved in water.
The options are (A) H3PO4, (B) Na2CO3, (C) KHCO3, and (D) Na2HPO4. The correct answer is (A) H3PO4. According to Arrhenius theory, an acid donates H+ ions in aqueous solutions, and according to Bronsted-Lowry theory, an acid donates protons (H+). H3PO4, or phosphoric acid, donates H+ ions in both theories, making it an acid only. The other options are either bases or salts, which do not exclusively act as acids in both theories.
To know more about Acid visit-
https://brainly.com/question/29796621
#SPJ11
what is the molarity of a solution made by dissolving 18.5 g of calcium hydroxide in 750.0 ml of water?
The molarity of the solution is 0.333 M. First, let's define what molarity is. Molarity (M) is a unit of concentration that measures the number of moles of solute (in this case, calcium hydroxide) per liter of solution.
To find the molarity of a solution, we need to follow these steps:
1. Calculate the number of moles of calcium hydroxide in 18.5 g. To do this, we need to use the formula:
moles = mass / molar mass
The molar mass of calcium hydroxide is 74.093 g/mol. Therefore,
moles = 18.5 g / 74.093 g/mol = 0.2494 mol
2. Convert the volume of water from milliliters (ml) to liters (L).
750.0 ml = 0.75 L
3. Calculate the molarity of the solution using the formula:
Molarity = moles of solute / liters of solution
Molarity = 0.2494 mol / 0.75 L = 0.332 M
Therefore, the molarity of the solution made by dissolving 18.5 g of calcium hydroxide in 750.0 ml of water is 0.332 M.
I hope this helps! Let me know if you have any further questions.
To calculate the molarity of a solution, you need to know the moles of solute and the volume of the solvent in liters. Here's a concise explanation using the given information:
1. Calculate the moles of calcium hydroxide (Ca(OH)₂):
Ca(OH)₂ has a molar mass of 40.08 g/mol (Ca) + 2(16.00 g/mol (O) + 1.01 g/mol (H)) = 74.09 g/mol.
18.5 g of Ca(OH)₂ ÷ 74.09 g/mol = 0.25 moles.
2. Convert the volume of water to liters:
750.0 mL = 0.750 L.
3. Calculate the molarity:
Molarity = moles of solute ÷ liters of solvent = 0.25 moles ÷ 0.750 L = 0.333 M.
To know kore about molarity visit:-
https://brainly.com/question/8732513
#SPJ11
write the acid ionization reaction for h2so4. don't forget to include states of matter in your chemical equation.
The acid ionization reaction for H₂SO is HSO (aq) → 2H⁺ (aq) + SO²⁻(aq). H₂SO is a dibasic acid.
Any process in physics and chemistry whereby electrically neutral atoms or molecules are changed into electrically charged atoms or molecules (ions) by receiving or losing electrons is known as ionisation. Radiation, including charged particles and X-rays, transmits its energy to matter mostly by ionisation.
Ionisation frequently takes place in a liquid solution in chemistry. For instance, neutral hydrogen chloride gas (HCl) molecules combine with polar water molecules (H₂O) to form positive hydronium ions (H₃O⁺) and negative chloride ions (Cl⁻). Zinc atoms, Zn, lose their electrons to hydrogen ions at the surface of a piece of metallic zinc exposed to an acidic solution, turning them into colourless zinc ions, Zn₂⁺.
When an electric current is sent through gases at low pressures, ionisation by collision happens. If the electrons that make up the current have enough energy (the ionisation energy varies depending on the material), they can drive other electrons out of the neutral gas molecules, creating ion pairs that are made up of a detached negative electron and the consequent positive ion. As some of the electrons bond with neutral gas molecules, negative ions are also created. At very high temperatures, intermolecular collisions can also ionise gases.
Learn more about Ionization reaction:
https://brainly.com/question/29614811
#SPJ4
Suppose the reaction of chlorine water with a halide solution produces a halogen, X2, and a salt, NaCl.In the presence of mineral oil, the-------will dissolve in the oil and the -------will remain in the aqueous layer.
This is an interesting question about the solubility of halogens and salts in different phases. The long answer is that the halogen, X2, will dissolve in the mineral oil phase, while the salt, NaCl, will remain in the aqueous layer. This is because halogens like chlorine and bromine are non-polar molecules that are soluble in non-polar solvents like mineral oil, whereas salts like NaCl are polar molecules that are soluble in polar solvents like water.
In the presence of mineral oil, the halogen X2 will dissolve in the oil phase due to its non-polar nature. This means that the mineral oil layer will turn yellow or brown depending on the halogen being produced. On the other hand, the salt NaCl will remain in the aqueous layer since it is a polar molecule and is not soluble in mineral oil. This means that the aqueous layer will remain clear or colorless, depending on the concentration of NaCl present.
Overall, the solubility of different compounds in different phases is an important concept in chemistry, and understanding it can help us predict the behavior of chemical reactions in different environments.
In the given reaction, chlorine water reacts with a halide solution to produce a halogen (X2) and a salt (NaCl). When mineral oil is introduced, the halogen (X2) will dissolve in the oil, while the salt (NaCl) will remain in the aqueous layer.
To know more about halogens visit :-
https://brainly.com/question/24505488
#SPJ11
the ka for formic acid (hcooh) is 1.8 x 10-4 . what is the ph of a 0.15 m aqueous solution of sodium formate (nahcoo)? group of answer choices 5.54 11.64 8.46 3.39 4.26
The correct option is C, The pH of the 0.15 M aqueous solution of sodium formate is 8.46.
The chemical equation for the reaction between formic acid and sodium formate is:
HCOOH + NaHCOO ⟷ HCOO⁻ + Na⁺ + H₂O
Ka = [H⁺][HCOO⁻] / [HCOOH]
[H⁺] = Ka x [HCOOH] / [HCOO⁻]
[H⁺] = (1.8 x [tex]10^{-4[/tex]) x (0.15) / 1
[H⁺] = 2.7 x [tex]10^{-5[/tex] M
pH = 14 - pOH
pH = 14 - (-log[OH⁻])
pH = 14 - (-log Kw / [OH⁻])
pH = 14 - (-log Kw - log [OH⁻])
pH = 14 - (14 + pKw - pOH)
pH = pKw - pOH
pH = 14 - 1/2(pKa - log [NaHCOO])
where pKw = 14, and pKa = -log Ka = -log (1.8 x [tex]10^{-4[/tex]) = 3.74.
Substituting the values into the equation gives:
pH = 14 - 1/2(3.74 - log 0.15)
pH = 8.46
pH is a measure of the acidity or basicity of a solution. The pH scale ranges from 0 to 14, with 0 being the most acidic, 7 being neutral, and 14 being the most basic (also called alkaline). The pH of a solution is determined by the concentration of hydrogen ions (H+) in the solution. The more hydrogen ions there are, the lower the pH and the more acidic the solution is. Conversely, the fewer hydrogen ions there are, the higher the pH and the more basic the solution is.
The pH of a solution can be measured using a pH meter or by using pH paper, which changes color depending on the pH of the solution. It is important to control the pH of certain chemical reactions and processes, as it can affect the rate of reaction and the properties of the resulting product.
To know more about pH refer to-
brainly.com/question/2288405
#SPJ4
PLEASE HELP I DONT HAVE MUCH TIME I WILL MARK AS BRAINLIST!!!!
A scientist conducts the gaseous reaction shown.
2 CH CH (9) + 70,(9) - 400,(9) + 6 HOg)
g
The scientist produces the potential energy diagram givenusing the data collected from the experiment.
When the reaction occurs, the net result is that the energy is released because the total potential energy of the products is greater than the total potential energy of the reactants.
Potential energy is any form of energy that is stored and can be released as work or heat. Chemical energy is stored in a substance that can undergo a chemical reaction that releases energy.
Chemical potential energy is the energy stored in the chemical bonds of a substance.
If the potential energy of reactants is greater than, excess energy is released after the formation of products in the reaction and such reactions are called as exothermic reactions.
Learn more about Potential Energy, here:
https://brainly.com/question/31100203
#SPJ1
what concentration of calcium chloride in water is needed to produce an aqueous solution having an osmotic pressure of 34.8 atm at 22.9°c? enter a number in molarity to 4 decimal places.
A concentration of 0.0672 mol/L of calcium chloride in water is needed to produce an aqueous solution having an osmotic pressure of 34.8 atm at 22.9°C.
To calculate the concentration of calcium chloride (CaCl₂) in water, we can use the osmotic pressure formula:
π = iMRT
where π is the osmotic pressure, i is Van't Hoff factor (number of ions in the solution), M is the molarity, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.
Given osmotic pressure (π) = 34.8 atm and,
Temperature (T) = 22.9°C = 296.05 K.
For CaCl₂, i = 3 (one Ca²⁺ ion and two Cl⁻ ions).
Now we need to solve for M (molarity):
34.8 atm = 3 * M * (0.0821 L atm/mol K) * 296.05 K
To find the molarity (M), rearrange the formula and solve:
M = (34.8 atm) / (3 * 0.0821 L atm/mol K * 296.05 K)
M ≈ 0.0672 mol/L
Therefore, a concentration of 0.0672 mol/L of calcium chloride in water is required here.
To know something about the osmotic pressure formula, click below.
https://brainly.com/question/30748685
#SPJ11
which element has the following configuration: [xe]6s24f4 ? enter the chemical symbol for the element.
The element with the configuration [Xe]6s24f4 is Gadolinium (Gd).
In the given electron configuration, "[Xe]" represents the electron configuration of the noble gas xenon (54 electrons). The following part, "6s24f4," indicates the distribution of the remaining electrons in the outer shells. The "6s2" portion indicates that there are two electrons in the 6s orbital, and the "4f4" indicates that there are four electrons in the 4f orbital.
Gadolinium is a chemical element with the atomic number 64 and the symbol Gd. It belongs to the lanthanide series of elements and is part of the f-block in the periodic table. Gadolinium is a silvery-white metal that exhibits magnetic properties and has various applications, including its use in medical imaging, nuclear reactors, and electronic devices.
Learn more about Gadolinium here:
https://brainly.com/question/30886793
#SPJ11
A mixture of 1.0 mol He and 1.0 mol Ne are at STP in a rigid container. Which of the following statements is TRUE?
Both gases have the same average kinetic energy.
All gas molecules in the container are moving at the same speed.
The mixture has a volume of 11.2 L.
Both gases have the same mass.
The statement that is true is "Both gases have the same average kinetic energy." This is because at STP (standard temperature and pressure), both gases have the same temperature (273 K) and pressure (1 atm), so their average kinetic energy, which is proportional to temperature, is the same.
The other statements are not necessarily true - the gas molecules can have different speeds and the volume of the mixture depends on the size of the container. The masses of the two gases are also different (He has a smaller atomic mass than Ne).
Based on the given terms and the question about the mixture of 1.0 mol He and 1.0 mol Ne at STP in a rigid container, the TRUE statement is: Both gases have the same average kinetic energy.
This is because at the same temperature, all gases have the same average kinetic energy, regardless of their mass or other properties.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ11