Answer:
The basic purpose for which most simple machines are designed is to reduce the effort (force) required to perform a simple task. To achieve this, the force applied must act over a longer distance or period of time resulting in the same amount of work being performed by a smaller force.
Answer:
to make work easier by reducing the effort to be used
Explanation:
What device increases voltage?
A. generator
B. motor
C. step-down transformer
D. step-up transformer
Your answer would be C.
A step-up transformer is a transformer that raises voltage from main to secondary by having more secondary winding turns than primary winding turns.
Hope this helps; have a great day!
Un puente(construido de acero) que conduce hacia una bahía mide 1.30X10-3m entre sus torres de apoyo. ¿Cuánto se dilata el puente durante un día en el que la temperatura alcanza una diferencia de 30°C?
Answer:
ΔL = 0.429 m
Explanation:
The expression for linear thermal expansion is
ΔL = α L₀ ΔT
the coefficient of linear expansion of steel is 11 10⁻⁶ ºC⁻¹
the initial length of the bridge is L₀ = 1.30 10³ m and the temperature variation is ΔT = 30 ºC
calculate
ΔL = 11 10⁻⁶ 1.30 10³ 30
ΔL = 4.29 10⁻¹ m
ΔL = 0.429 m
A car, of mass 2.1 X 10^3 kg, travels in the horizontal plane around an unbanked curve of a radius of 275 m at a speed of 26 m/s, without sliding.
a) Determine the minimum coefficient of static friction between the tires and the road.
b) How would your answer in part a) be affected if the mass of the vehicle were greater because of the presence of heavy cargo?
c) How would your answer in part a) be affected if the curve were sharper, i.e., if its radius were smaller?
Answer:
Centripetal force is perpendicular to velocity and causes uniform circular motion. ... force exerted on a 900.0-kg car that negotiates a 500.0-m radius curve at 25.00 m/s. ... A car moving at 96.8 km/h travels around a circular curve of radius 182.9 m ... Because the car does not leave the surface of the road, the net vertical force ...
Explanation:
HE monda
The object having uniform velocity has zero acceleration, why?
What is the average speed of inchworm 1 at 2 minutes?
I made the chart as clear as I could.
Answer: 2
Explanation:
The average speed of the inchworm 1 at 2 minutes in the given graph is determined as 0.025 m/s.
What is average speed?The average speed of an object is the rate of change of displacement of the object with time.
The average speed of the inchworm 1 at 2 minutes is calculated as follows;
v = D/t
v = 3 m/(2 min x 60 s)
v = 0.025 m/s
Thus, the average speed of the inchworm 1 at 2 minutes is 0.025 m/s.
Learn more about average speed here: https://brainly.com/question/6504879
A strand of 10 lights is plugged into a outlet. How can you determine if the lights are connected in series or parrel
Answer:
C) Unscrew one light. If the other lights turn off, it's a series circuit.
Explanation:
THIS IS THE COMPLETE QUESTION BELOW;
A strand of 10 lights is plugged into an outlet. How can you determine if the lights are connected in series or parallel? A) Unscrew one light. If the other lights stay on, it's a series circuit. B) Unplug the strand. If the first light stays on, it's a series circuit. C) Unscrew one light. If the other lights turn off, it's a series circuit. D) Cut the strand in half. If the plugged in half stays on, it's a series circuit.
SERIES CIRCUIT
In this circuit, the components there are in the same path, the entire circuit has the same current, each of the components posses different voltage drop. Hence, failure of one components to work, there will be break in entire circuit then other components cease to work.
PARALLEL CIRCUIT
This circuit has equal voltage drop across all the components, any problem in a component will not has effect on other components.
Therefore, if one want to determine if a light connection is in series or in parallel, one of the light can be unplugged if others stop working it means it's series, if other works it's parallel.
a change in earths total isolation would be caused by _____?
Answer:
sunspots
Sunspots are areas in the sun that has a magnetic field is about 2 thousand times stronger than Earth's. Also is much higher than anywhere else on the Sun.
Which statement is false?
A) Doubling the mass halves the acceleration
B) Doubling the force doubles to acceleration
C) Doubling the mass doubles the acceleration
Statement C is false. Doubling the mass doubles the acceleration is the wrong statement.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
Force is defined as the product of mass and acceleration. Its unit is Newton.
Mathematically, the force is;
[tex]\rm F= ma[/tex]
If force is constant, the mass is inversely proportional to the acceleration. If the mass is double in that condition, acceleration is halved.
Doubling the mass doubles the acceleration is the wrong statement.
Hence, statement C is false
To learn more about the force, refer to the link;
https://brainly.com/question/26115859
#SPJ2
in an exothermic reaction, chemical energy is converted to ____ energy.
FILL IN THE BLANK.
MECHANICAL OR THERMAL.
Answer:thermal energy
Explanation:
please mark this answer as brainliest
What is the polarity of each of the earths magnetic poles ? Explain you answer
Answer:
When you put un-like poles together (South facing North) you can feel magnetic attraction. In the Northern Hemisphere, your compass needle points North, but if you think about it for a moment, you will discover that the magnetic pole in the Earth's Northern Hemisphere has to be a South polarity.
Which is true about forensic testing? Forensic scientists must accurately interpret test results Evidence testing is no longer reliable All tests are fully automated Forensic scientists never make mistakes
Answer:
Forensic scientists must accurately interpret test results
Explanation:
Misinterpreting test results could mean someone being falsely accused of a crime which you would want to avoid.
Which applications, either for diagnostic purposes or for therapeutic purposes, involve the use of X-rays? Check all that apply.
CT scan
MRI
radiography
brachytherapy
laser eye surgery
radioisotope imaging
external beam radiation therapy
fluoroscopy
Answer:
1,3,7,8
Explanation:
Edge 2021
Two long straight parallel lines, #1 and #2, carry uniform positive linear charge densities. The charge density on line #2 is twice as great as the charge density on line #1. The locus of points where the electric field due to these lines is zero is
along a line between the lines closer to line #2 than line #1.
at a point midway between the lines.
along a line between the lines closer to line #1 than line #2.
along a line perpendicular to lines #1 and #2.
Answer:
The locus of points where the electric field due to these lines is zero is;
Along the line between the lines closer to line#1 than line #2
Explanation:
The charges on the parallel lines #1 and #2 = Positive linear charge
The charge density on line #2, λ₂ = 2 × The charge density on line #1, λ₁
Therefore, we have;
λ₂ = 2 × λ₁
Electric field strength, E, is given as follows;
[tex]E = \dfrac{\lambda}{2\cdot \pi\cdot \epsilon_0\cdot d}[/tex]
Therefore;
[tex]E_1 = \dfrac{\lambda_1}{2\cdot \pi\cdot \epsilon_0\cdot d}[/tex]
[tex]E_2 = \dfrac{\lambda_2}{2\cdot \pi\cdot \epsilon_0\cdot d} = 2 \times\dfrac{\lambda_1}{2\cdot \pi\cdot \epsilon_0\cdot d}[/tex]
E₂ = 2·E₁
E₂/2 = E₁
E₂/(2·d) = E₁/d
The strength of the electric field at a given distance from line #2 is 2 times the strength of the electric field from line #1 at the same distance
Therefore the strength of the electric field will be the same at a point twice the distance from line #2 than from line #1 which is a point closer to line #1 than line #2.
A 75N horizontal force is sufficient to move a 150N box on a level road at a uniform speed. What is the coefficient of friction between the box and the road?
Answer:
[tex]\mu_k=0.5[/tex]
Explanation:
From the question we are told that:
Force [tex]F=75N[/tex]
Weight [tex]W=150N[/tex]
Generally the equation for coefficient of friction [tex]\mu_k[/tex] is mathematically given by
[tex]\mu_k=\frac{F}{mg}[/tex]
[tex]\mu_k=\frac{75}{150}[/tex]
[tex]\mu_k=0.5[/tex]
Identify the forces present on the divers in the picture below.
Gravity
Spring
Tension
Normal
Sliding Friction
Air Resistance
Answer:
sliding friction/air resistance
When the voltage is
4V, the light bulb
flows 300 mA. What
work does the
electricity do in 5
minutes?
Explanation:
ask to nirajan shrestha
search on fb
he is good science teacher❣❣❣
Question:The greater the
of the object, the greater the
force needed to achieve the same change in motion.
Answer:
True
Explanation:
when the object is larger , the inertia of the object is larger so its tendency to change its state of motion is reduced is reduced.
How much work does the electric field do in moving a -7.7 hC charge from the ground to a point whose potential is +55 V higher?
4. Priya notices thet the pressure inside one of her car tyres is too low. She pumps up the tyre to a higher pressure. a) What happens to the number of particles in the car tyre? b) What happens to the distance between particles as pressure increase? c) One of the tyres gets a puncture(small hole) . What happens to the pressure inside the tyre?
Answer:
a) the number of particles increases
b) average distance between them should decrease
c) the number of particles decreases, the pressure must also decrease
Explanation:
a) When the girl pumps to increase the pressure inside the tire she introduces more particles. Therefore the number of particles increases
b) as the volume of the tire does not change and there are more particles, the average distance between them should decrease
c) When a hole is opened, some of the particles inside the tire come out, so as the number of particles decreases, the pressure must also decrease
GIVING EASY BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 26pts-
Answer:
Y
Explanation:
The fulcrum is the point where the scissor blades are joined together. The force or effort is the end or handle of the scissors. The parts of a pair of pliers are similar to the scissors.
How many hydrogen atoms are in one molecule of (NH4)2SO4
There are eight hydrogen atoms in (NH4)2SO4
What kind of waves can cause the most damage on the earth's surface?
Answer:
Surface waves, in contrast to body waves can only move along the surface. They arrive after the main P and S waves and are confined to the outer layers of the Earth. They cause the most surface destruction. Earthquake surface waves are divided into two different categories: Love and Rayleigh.
Explanation:
Hope this helped Mark BRAINLIEST!!!
Answer:
Surface waves are the seismic waves that cause the most damage.
Explanation:
Help pls !!!
Which statement is true for nuclear reactions but not for chemical reactions?
Answer:
its c
Explanation:
what will happen if you increse the amplitude of a drum hit
The sound is perceived as louder if the amplitude increases, and softer if the amplitude decreases. As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder.
How do we use pulleys in real life?
Answer:
Construction pulleys are used in order to lift and place heavy materials. Curtains at a theatre are moved using pulley systems that pull the curtains apart. Blinds on windows operate using a pulley system to move the blinds up and down.
We use pulleys for things like and elevators, cranes, and bikes.
Match the following waves on the EM Spectrum with the correct letter;
Visible Light, Radio Waves, and X Rays
Answer:
(D) is visible light
Explanation:
(F) is xray and (B) is radio
Which of the following is an example of static electricity?
O Lit light bulb
O Charging battery
O Lightning
O Movie streaming on TV
Miles and Joselin are riding a two person long board down an extremely dangerous hill while Chloe watches in horror and Talia in delight. At the end of the hill Alex and Jason are holing a crash pad to stop the dynamic duo from falling off the cliff. If the riders have a combined mass of 200 kg and an acceleration of 30 m/s^2, what Force will they crash the mattress with? Use the correct Force for full credit.
Answer:
They will crash with the force of 6,000N
Explanation:
Force is equal to mass time acceleration. When we multiply 200 kg, the mass, and 30 m/s2, the acceleration, the answer is 6,000.
Need all the answers to (Lab report: phase change) asap
Explanation: It's really blurry and sideways
The temperature measured outside the International Space Station is 2.7 Kelvin. How is it possible for empty space to have a temperature?
Answer:
people could just have a space heater or they are wearing warm clothes.
Explanation:
COMMON SENSE!!!!!