write the IUPAC name OF THE FOLLOWING COMPOUNDS

Answer:

Strong intermolecular forces:  an increase in viscosity of the liquid, increase in surface tension, decrease in vapor pressure, and an increase in the boiling point.

Weak intermolecular forces: a decrease in viscosity, a decrease in surface tension, an increase in vapor pressure and an increase in boiling point.

Explanation:

Intermolecular forces are forces of attraction or repulsion between neighboring molecules in a substance. These intermolecular forces inclde dispersion forces, dipole-dipole interactions, hydrogen bonding, and ion-dipole forces.

The strength of the intermolecular forces in a liquid usually affects the various properties of the liquid such as viscosity, surface tension, vapour pressure and boiling point.

Strong intermolecular forces in a liquid results in the following; an increase in viscosity of the liquid, increase in surface tension, decrease in vapor pressure, and an increase in the boiling point of the liquid.

Weak intermolecular forces in a liquid results in the following; a decrease in viscosity, a decrease in surface tension, an increase in vapor pressure and an increase in boiling point of that liquid.

Strong intermolecular force is defined as the increase in viscosity of the liquid, increase in surface tension, decrease in vapor pressure, and an increase in the boiling point while  weak intermolecular forces define as the decrease in viscosity, a decrease in surface tension, an increase in vapor pressure, and an increase in boiling point.

Intermolecular forces are forces of attraction or repulsion between neighboring molecules in a substance. These intermolecular forces include as follows:-

Strong intermolecular forces in a liquid result in the following; an increase in viscosity of the liquid, increase in surface tension, decrease in vapor pressure, and an increase in the boiling point of the liquid.

Weak intermolecular forces in a liquid result in the following; a decrease in viscosity, a decrease in surface tension, an increase in vapor pressure, and an increase in the boiling point of that liquid.

For more information, refer to the link:-

https://brainly.com/question/12271256

Answer:

100 g of water: specific heat of water 4.18 J/g°C

Explanation:

To know the correct answer to the question, we shall determine the temperature change in each case.

For 100 g of water:

Mass (M) = 100 g

Specific heat capacity (C) = 4.18 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 100 x 4.18 x ΔT

Divide both side by 100 x 4.18

ΔT = 55000/ (100 x 4.18)

ΔT = 131.6 °C

Therefore the temperature change is 131.6 °C

For 50 g of water:

Mass (M) = 50 g

Specific heat capacity (C) = 4.18 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 50 x 4.18 x ΔT

Divide both side by 50 x 4.18

ΔT = 55000/ (50 x 4.18)

ΔT = 263.2 °C

Therefore the temperature change is 263.2 °C

For 50 g of lead:

Mass (M) = 50 g

Specific heat capacity (C) = 0.128 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 50 x 0.128 x ΔT

Divide both side by 50 x 0.128

ΔT = 55000/ (50 x 0.128)

ΔT = 8593.8 °C

Therefore the temperature change is 8593.8 °C.

For 100 g of iron:

Mass (M) = 100 g

Specific heat capacity (C) = 0.449 J/g°C

Heat absorbed (Q) = 55 KJ = 55000 J

Change in temperature (ΔT) =..?

Q = MCΔT

55000 = 100 x 0.449 x ΔT

Divide both side by 100 x 0.449

ΔT = 55000/ (100 x 0.449)

ΔT = 1224.9 °C

Therefore the temperature change is 1224.9 °C.

The table below gives the summary of the temperature change of each substance:

Mass >>> Substance >> Temp. Change

100 g >>> Water >>>>>> 131.6 °C

50 g >>>> Water >>>>>> 263.2 °C

50 g >>>> Lead >>>>>>> 8593.8 °C

100 g >>> Iron >>>>>>>> 1224.9 °C

From the table given above we can see that 100 g of water has the smallest temperature change.

Answer:

495nm

Explanation:

The energy of a photon could be obtained by using:

E = hc / λ

Where E is energy of a photon, h is Planck's constant (6.626x10⁻³⁴Js), c is speed of the light (3x10⁸ms⁻¹) and λ is wavelength.

The energy to break 1 mole of Cl-Cl bonds is 242kJ = 242000J. The energy yo break a single bond is:

242000J/mol ₓ (1mol / 6.022x10²³bonds) = 4.0186x10⁻¹⁹J/bond.

Replacing in the equation:

E = hc / λ

4.0186x10⁻¹⁹J = 3x10⁸ms⁻¹ₓ6.626x10⁻³⁴Js / λ

λ = 4.946x10⁻⁷m

Is maximum wavelength  of light that could break a Cl-Cl bond.

Usually, wavelength is given in nm (1x10⁻⁹m / 1nm). The wavelength in nm is:

4.946x10⁻⁷m ₓ (1nm / 1x10⁻⁹m) =

Answer:

pH 4.7: 5mL of 0.10 M CH3COOH and 5mL 0.10 M CH3COONa

pH 5.7: 0.91mL of 0.10 M CH3COOH and 9.09mL 0.10 M CH3COONa

Explanation:

pKa acetic acid, CH3COOH = 4.7

It is possible to determine pH of a buffer using H-H equation:

pH = pka + log [A⁻] / [HA]

For the acetic buffer,

pH = 4.7 + log [CH3COONa] / [CH3COOH]

As you want a pH 4.7 buffer:

4.7 = 4.7 + log [CH3COONa] / [CH3COOH]

1 = [CH3COONa] / [CH3COOH]

That means you need the same amount of both species of the buffer to make the pH 4.7 buffer. That is:

For pH 5.7:

5.7 = 4.7 + log [CH3COONa] / [CH3COOH]

1 = log [CH3COONa] / [CH3COOH]

10 = [CH3COONa] / [CH3COOH] (1)

That means you need 10 times [CH3COONa] over [CH3COOH]

And as you know:

10mL=  [CH3COONa] + [CH3COOH] (2)

Replacing (1) in (2):

10 = 10mL + [CH3COOH] / [CH3COOH]

10[CH3COOH] = 10mL + [CH3COOH]

11[CH3COOH] = 10mL

[CH3COOH] = 0.91mL

And [CH3COONa] = 10mL - 0.91mL =

[CH3COONa] = 9.09mL

That is:

The volumes according to the pH are as follows:

(i) 5mL of 0.10 M CH₃COOH and 5mL 0.10 M CH₃COONa for pH 4.7

(ii) 0.91mL of 0.10 M CH₃COOH and 9.09mL 0.10 M CH₃COONa pH 5.7

Given that pKa of acetic acid, CH₃COOH = 4.7

The pH of a buffer using the H-H equation is given by:

pH = pKa + log [A⁻] / [HA]

For the acetic buffer,

pH = 4.7 + log [CH₃COONa] / [ CH₃COOH]

4.7 = 4.7 + log [CH₃COONa] / [ CH₃COOH]

0 = log [CH₃COONa] / [ CH₃COOH]

takin antilog on both sides of the equation we get:

1 = [CH₃COONa] / [CH₃COOH]

It implies that the same amount of both species is needed to make the pH 4.7 buffer.

So,

5mL of 0.10 M CH₃COOH and 5mL 0.10 M CH₃COONa makes a buffer of pH 4.7

Similarly:

5.7 = 4.7 + log [CH₃COONa] / [CH₃COOH]

1 = log [CH₃COONa] / [CH₃COOH]

takin antilog on both sides of the equation we get:

10 = [CH₃COONa] / [CH₃COOH]

10[CH₃COOH] = [CH₃COONa]

It implies that we need 10 times [CH₃COONa] as much of [CH₃COOH]

We have to prepare 10 mL of buffer, so:

10mL=  [CH₃COONa] + [CH₃COOH]

10mL = 11[CH₃COOH]

[CH₃COOH] = 0.91mL

So, [CH₃COONa] = 10mL - 0.91mL

[CH₃COONa] = 9.09mL

Therefore,

0.91mL of 0.10 M CH3COOH and 9.09mL 0.10 M CH3COONa is required to make a buffer of pH 5.7

Learn more about buffer:

https://brainly.com/question/17351586?referrer=searchResults

Answer:

Benzoic acid: 1.288g

Sodium benzoate: 124.48g

Explanation:

Benzoic acid, HC7H5O2 is in equilibrium with its conjugate base, C7H5O2⁻ producing a buffer. The pH of the buffer can be determined following H-H equation:

pH = pKa + log [C7H5O2⁻] / [HC7H5O2] (1)

Where pH is desire pH = 6.10 pKa is -log Ka = 4.187 and [] are molar concentrations of the buffer.

As you want to prepare 2.5L of a 0.35M of buffer, moles of buffer are:

2.5L ₓ (0.35mol / L) = 0.875moles of buffer.

And you can write:

0.875 moles = [C7H5O2⁻] + [HC7H5O2] (2)

Replacing (2) in (1)

pH = pKa + log [C7H5O2⁻] / [HC7H5O2]

6.10 = 4.187 + log [C7H5O2⁻] / [HC7H5O2]

1.913 =  log [C7H5O2⁻] / [HC7H5O2]

81.846 = 0.875mol - [HC7H5O2] / [HC7H5O2]

81.846 [HC7H5O2] = 0.875mol - [HC7H5O2]

82.846 [HC7H5O2] = 0.875mol

And moles of the benzoate, [C7H5O2⁻]:

[C7H5O2⁻] = 0.875mol - 0.01056mol =

Using molar mass of benzoic acid and sodium benzoate, amount of each compound you must add to prepare 2.5L of the buffer are:

Benzoic acid: 0.01056mol ₓ (122.01g/mol) = 1.288g

Sodium benzoate: 0.8644mol ₓ (144.01g/mol) = 124.482g

Answer:

D.

Explanation:

If a compound is composed of oppositely charged ions, it has to be formed by metal and non-metal.

Li2O

Li - metal

O - non-metal

Answer

mass of aluminum metal= 7 .0497g of Al

Explanation:

current = 21 A

time = 1 hour = 60 X 60 = 3600 s

quantity of electricity passed = current X time = 21X 3600 = 75600 C

Following the electrolysis the below reaction will occur :

Al3+ + 3e- --------> Al

therefore, 3F i.e. 3 X 96500 C = 289500 C gives 1 mole of Al

so 1 C will produce 1/289500 moles of Al

so 108000 C will produce 1/289500 X 75600 = 0.2611 moles of Al

now 1 mole of aluminium weighs = 27 g/mole

so 0.2611 moles of Al = 0.2611 X 27 = 7 .0497 g

mass of aluminum metal= 7 .0497 g of Al

The mass of aluminum metal can be produced per hour in the electrolysis of a molten aluminum salt by a current of 21 A is 7.05 g

We'll begin by calculating the the quantity of electricity used. This can be obtained as follow:

Current (I) = 21 A

Time(t) = 1 h = 60 × 60 = 3600 s

Q = it

Q = 21 × 3600

Recall:

1 mole of Al = 27 g

1 electron (e) = 96500 C

Thus,

3 electrons = 3 × 96500 = 289500 C

From the balanced equation above,

289500 C of electricity produced 27 g of Al.

Therefore,

75600 C of electricity will produce = (75600 × 27) / 289500 = 7.05 g of Al

Thus, the mass of the aluminum metal obtained is 7.05 g

Learn more: https://brainly.com/question/25626152

Answer:

aldehyde

carbon-1

ketone

carbon-2

Explanation:

Monosaccharides are colorless crystalline solids that are very soluble in water. Moat have a swwet taste. D-Fructose is the sweetest monosaccharide.

In the open chain form, monosaaccharides have a carbonuyl group in one of their chains. If the carbonyl group is in the form of an aldehyde group, the monosaccharide is an aldose; if the carbonyl group is in the form of a ketone group, the monosaccharide is known as a ketose. glucose is an aldose while fructose is a ketose.

In D-glucose, there is an aldehyde functional group, and the carbonyl group is at carbon-1 when looking at the Fischer projection.

In D-fructose, there is a ketone functional group, and the carbonyl group is at carbon-2 when looking at the Fischer projection.

Answer:

k= 1.925×10^-4 s^-1

1.2 ×10^20 atoms/s

Explanation:

From the information provided;

t1/2=Half life= 1.00 hour or 3600 seconds

Then;

t1/2= 0.693/k

Where k= rate constant

k= 0.693/t1/2 = 0.693/3600

k= 1.925×10^-4 s^-1

Since 1 mole of the nuclide contains 6.02×10^23 atoms

Rate of decay= rate constant × number of atoms

Rate of decay = 1.925×10^-4 s^-1 ×6.02×10^23 atoms

Rate of decay= 1.2 ×10^20 atoms/s

Answer:

0.900 V

Explanation:

Oxidation half cell;

2Al(s) -----> 2Al^3+(aq) + 6e

Reduction half equation;

3Zn^2+(aq) + 6e ----> 3Zn(s)

E°anode = -1.66V

E°cathode= -0.76 V

E°cell= E°cathode - E°anode

E°cell= -0.76-(-1.66)

E°cell= 0.900 V

Answer:

b. Binary compounds of carbon and hydrogen

Explanation:

Before proceeding, Hydrocarbons refers to organic chemical compounds composed exclusively of hydrogen and carbon atoms. This means the only elements present in an hydrocarbon are;

- Carbon

- Hydrogen

Looking through the options;

- Option A: This is wrong because the hydroxyl group contains oxygen and hydrocarbons contain only hydrogen and carbon.

- option B: This is correct. Binary compounds refers to compounds with just two elements.

- option C: This is wrong because water contains oxygen and hydrocarbons contain only hydrogen and carbon.

- option D: Carbon atoms can contain other elements so this option is wrong.

- option E: This also wrong because we had already gotten the correct option.

Answer:

The process of slowly adding one solution to another until the reaction between the two is complete.

Explanation:

When you perform a titration, you are slowly adding one solution of a known concentration called a titrant to a known volume of another solution of an unknown concentration until the reaction reaches neutralization, in which the reaction is no longer taking place. This is often indicated by a color change.

Hope that helps.

Answer:

empirical formula = C3H7

molecular formula = C6H14

Answer:

Lewis acid

Explanation:

In chemistry, a Lewis acid is any chemical specie that accepts a lone pair of electrons while a Lewis base is any chemical specie that donates a lone pair of electrons.

If we look at the formation of PF6^-, the process is as follows;

PF5 + F^- -----> PF6^-

We can see that PF5 accepted a lone pair of electrons from F^- making PF5 a lewis acid according to our definition above.

Hence in the formation of PF6^-, PF5 acts a Lewis acid.

Answer:

0.0913 M

Explanation:

We'll begin by writing the balanced equation for the reaction.

This is given below:

H2C3H2O4 + 2NaOH —> C3H2Na2O4 + 2H2O

From the balanced equation above, we obtained the following:

The mole ratio of the acid (nA) = 1

The mole ratio of the base (nB) = 2

Data obtained from the question include:

Molarity of base, NaOH (Mb) = 0.0990 M

Volume of base, NaOH (Vb) = 20.52 mL

Volume of acid, H2C3H2O4 (Va) = 11.13 mL

Molarity of acid, H2C3H2O4 (Ma) =..?

The molarity of the acid, H2C3H2O4 can be obtained as follow:

MaVa/MbVb = nA/nB

Ma x 11.13 / 0.0990 x 20.52 = 1/2

Cross multiply

Ma x 11.13 x 2 = 0.0990 x 20.52 x 1

Divide both side by 11.13 x 2

Ma = (0.0990 x 20.52)/ (11.13 x 2)

Ma = 0.0913 M

Therefore, the molarity of malonic acid, H2C3H2O4 solution is 0.0913 M

Answer:

Decreases

Explanation:

Fatty acid which have the double bond or triple bond are called unsaturated fatty acids. Because of the double or triple bond, unsaturated fatty acids are loosely packed and form some distance among molecules which lowers the melting point of unsaturated fatty acids.

So, if the unsaturation of fatty acid will increase, it leads to more branched and loosely packed molecules and decreases the melting temperature accordingly.

Answer:

The concentration of energy needed to withdraw an electron from an atom’s mole in the gas phase is known as the ionization energy of an atom. It is more accurately termed as the first ionization energy. The ionization energy upsurges from left to right through a period and from top to bottom in the groups.  

Of the given elements S, Ca, F, Rb, and Si, the S, and Si belong to the third period, and the atomic radius of S is less in comparison to Si, F belongs to the second period, Rb belongs to the fifth period, and Ca belongs to the fourth period. Thus, the decreasing order of first ionization energy, that is, from largest to smallest is F > S > S > Ca > Rb.  

Considering the definition of ionization energy,

Ionization energy, also called ionization potential, is the necessary energy that must be supplied to a neutral, gaseous, ground-state atom to remove an electron from an atom. When an electron is removed from a neutral atom, a cation with a charge equal to +1 is formed.

You should keep in mind that the electrons of the last layer are always lost, because they are the weakest attracted to the nucleus.

In a group, the ionization energy increases upwards because when passing from one element to the bottom, it contains one more layer of electrons. Therefore, the valence layer electrons, being further away from the nucleus, will be less attracted to it and it will cost less energy to pluck them.

In the same period, in general, it increases as you shift to the right. This is because the elements in this way have a tendency to gain electrons and therefore it will cost much more to tear them off than those on the left which, having few electrons in the last layer will cost them much less to lose them.

Taking into account the above, the decreasing order of first ionization energy, that is, from largest to smallest is F > S > S > Ca > Rb.  

Learn more:

Answer:

The mass number of the stable daughter product is 208

Explanation:

First thing's first, we have to write out the equation of the reaction. This is given as;

²³²₉₀Th → 6 ⁴₂α  +  4 ⁰₋₁ β + X

In order to obtain the identity of X, we have to obtain it's mass numbers and atomic number.

There is conservation of matter so we expect the mass number to remain the same in both the reactant and products.

Mass Number

Reactant = 232

Product = (6* 4 = 24) + (4 * 0 = 0) + x = 24 + x

since reactant = product

232 = 24 + x

x = 232 - 24 = 208

Atomic Number

Reactant = 90

Product = (6* 2 = 12) + (4 * -1 = -4) + x = 8 + x

since reactant = product

90 = 8 + x

x = 90 - 8 = 82

Answer:

The answer to this question can be defined as follows:

In question 1, the answer is "Option A".

In question 2, the answer is "[tex]\bold{CH_3COOH}[/tex]".

Explanation:

In the second question, there is mistype error in the choices so the correct answer to this question can be defined as follows:

Answer:

Explanation:

Mn( NO₃ )₂ + 2Na OH = Mn( OH)₂ (s) ↓ +  2Na NO₃

Converting into ions

Mn⁺ + 2 NO₃⁻ + 2 Na⁺ + 2 OH⁻ = Mn( OH)₂ + 2 Na⁻ + 2 NO₃⁻

Cancelling out common terms

Mn⁺ + 2 OH⁻ = Mn( OH)₂

this is net ionic equation required.

Answer:

Explanation:

[tex]2x^2+10x-48\\=2\left(x^2+5x-24\right)\\x^2+5x-24\\=\left(x^2-3x\right)+\left(8x-24\right)\\=x\left(x-3\right)+8\left(x-3\right)\\=\left(x-3\right)\left(x+8\right)\\=2\left(x-3\right)\left(x+8\right)\\2\left(x-3\right)\left(x+8\right)=0\\x-3=0\\x = 0+3\\x = 3\\x+8=0\\x+8-8=0-8\\x=-8\\x=3,\:x=-8[/tex]

Explanation:

Speed = 2345 ÷ 35 = 67m/s

Explanation:

Answer:

solid dont know

Explanation:

so sorry ask another

Answer:

[C₆H₅NH₃⁺] = 0.0399 M

Explanation:

This excersise can be easily solved by the Henderson Hasselbach equation

C₆H₅NH₃Cl → C₆H₅NH₃⁺  + Cl⁻

pOH = pKb + log (salt/base)

As we have value of pH, we need to determine the pOH

14 - pH = pOH

pOH = 8.43  (14 - 5.57)

Now we replace data:

pOH = pKb + log ( C₆H₅NH₃⁺/  C₆H₅NH₂ )

8.43 = 9.13 + log (  C₆H₅NH₃⁺ / 0.2 )

-0.7 = log (  C₆H₅NH₃⁺ / 0.2 )

10⁻⁰'⁷ = C₆H₅NH₃⁺ / 0.2

0.19952 = C₆H₅NH₃⁺ / 0.2

C₆H₅NH₃⁺ = 0.19952 . 0.2  = 0.0399 M

Answer:

a) 4CH₃NH₂ + 9O₂ ⇄  4CO₂ + 10H₂O + 2N₂    

b) m = 5,043 g

c) % = 69,4 %

Explanation:

a) La ecuación balanceada es la siguiente:

4CH₃NH₂ + 9O₂ ⇄  4CO₂ + 10H₂O + 2N₂              

En el balanceo, se tiene en la relación estequiométrica que 4 moles de metilamina reacciona con 9 moles de oxígeno para producir 4 moles de dióxido de carbono, 10 moles de agua y 2 moles de nitrógeno.  

b) Para determinar la masa de nitrógeno se debe calcular primero el reactivo limitante:

[tex]n_{O_{2}} = \frac{m}{M} = \frac{25,6 g}{31,99 g/mol} = 0,800 moles[/tex]      

[tex]n_{CH_{3}NH_{2}} = \frac{4}{9}*0,800 moles = 0,356 moles[/tex]

De la ecuación anterior se tiene que la cantidad de moles de metilamina necesaria para reaccionar con 0,800 moles de oxígeno es 0,356 moles, y la cantidad de moles iniciales de metilamina es 0,5 moles, por lo tanto el reactivo limitante es el oxígeno.

Ahora, podemos calcular la masa de nitrógeno producida:

[tex]n_{N_{2}} = \frac{2}{9}*n_{O_{2}} = \frac{2}{9}*0,8 moles = 0,18 moles[/tex]

[tex]m_{N_{2}} = n_{N_{2}}*M = 0,18 moles*28,014 g/mol = 5,043 g[/tex]

Por lo tanto, se pueden producir 5,043 g de nitrógeno.

c) El redimiento de la reacción se puede calcular usando la siguiente fórmula:

[tex] \% = \frac{R_{r}}{R_{T}}*100 [/tex]

Donde:

[tex]R_{r}[/tex]: es el rendimiento real

[tex]R_{T}[/tex]: es el rendimiento teórico

[tex]\% = \frac{3,5}{5,043}*100 = 69,4[/tex]

Entonces, el procentaje de rendimiento de la reacción es 69,4%.

Espero que te sea de utilidad!        

Answer:

Graphite> sodium chloride> solid ammonia

Explanation:

Melting points of solids has a lot to do with the nature of intermolecular forces in the solid. A substance melts when the intermolecular forces holding the crystal lattice has been overcome such that that the crystal structure of the solid just collapses.

Graphite consists of covalently bonded layers of carbon atom which form a giant lattice. The melting point of graphite is very high because of the fact that the strong covalent bonds that hold the carbon atoms together in the layers require a lot of heat energy to break. Grapoghite melts at about 3600°C

Sodium chloride is an ionic compound that melts at about 801°C. The lattice is composed of alternate sodium and chloride ions.

Solid ammonia is held together by much weaker intermolecular interaction hence it has a melting point of about −77.73 °C.

Answer:

Number of moles of gas is directly proportional to the volume of the gas

Number of moles of the gas is directly proportional to the temperature of the gas

Explanation:

According to Avogadro's law, changing the number of moles of a gas changing the volume of the gas also since the volume of a gas is directly proportional to the number of moles of the gas.

Hence from Avogadro's law; V= kn where k is a proportionality constant, V is the volume of the gas and n is the number of moles of the gas.

Changing the number of moles will also lead to a change in the temperature of the gas, since volume is directly proportional to the number of moles of the gas and volume is also directly proportional to temperature (Charles law), it the follows that number of moles of the gas is directly proportional to its temperature.

Answer:

3.00 L

Explanation:

Convert the pressure to Pascals.

P = 82 atm × (101325 Pa/atm)

P = 8,308,650 Pa

Convert temperature to Kelvins.

T = 27°C + 273

T = 300 K

Use ideal gas law:

PV = nRT

(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)

V = 0.00300 m³

If desired, convert to liters.

V = (0.00300 m³) (1000 L/m³)

V = 3.00 L

Answer:

[tex]\large \boxed{\text{3.0 L}}[/tex]

Explanation:

[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]