You are throwing a ball straight up in the air. At the highest point, the ball's.....
acceleration is nonzero, but its velocity is zero.
velocity and acceleration are both nonzero.
velocity is nonzero but its acceleration is zero.
velocity and acceleration are zero.​

Answer:

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 60 × 2

We have the final answer as

Hope this helps you

Answer:

The distance is [tex]r = 55430496 \ m[/tex]  

Explanation:

From the question we are told that

   The period of the moon [tex]T = 1.2 days = 1.2 * 24 * 3600 = 103680 \ s[/tex]

    The mass of the planet is  [tex]m_p = 9.38*10^{24} kg[/tex]

Generally the period of the moon is mathematically represented as

       [tex]T = 2 * \pi * \sqrt{ \frac{r^3 }{ G * m_p } }[/tex]

Here G is the gravitational constant with value

        [tex]G = 6.67 *10^{-11} \ N \cdot m^2/kg^2[/tex]

=>   [tex]T = 2 * \pi * \sqrt{ \frac{r^3 }{ G * m_p } }[/tex]

=>   [tex]103680 = 2 * 3.142 * \sqrt{ \frac{r^3 }{ 6.67*10^{-11} * 9.38*10^{24} } }[/tex]

=>    [tex]272218492.31 = \frac{r^3}{ 6.67 *10^{-11} * 9.38*10^{24}}[/tex]

=>    [tex]r = \sqrt[3]{ 1.7031241*10^{23}}[/tex]j

=>   [tex]r = 55430496 \ m[/tex]        

Answer:

light refraction

Explanation:

Answer:

Explanation:

for rolling motion down the plane acceleration is given by the following expression

a = g sinθ / (1 + k² / R²)

here k is radius of gyration and R is radius of the object rolling down .

for cylinder I = 1/2 m R²

so k² = R² / 2

k² / R² = 1/2

a = g sinθ /( 1 + 1 / 2 )

= 2 / 3 x  g sinθ

v = √ 2 a s

= √ (2 x  2 / 3 x  g sinθ s )

= √ (4  / 3 x  g h  )

= √ (4  / 3 x  g x .5  )

= √ 2g / 3

for sphere  I = 2/5  m R²

so k² = 2/5 R²

k² / R² = 2 / 5  

a = g sinθ / (1 + 2 / 5)  

= 5 / 7  x  g sinθ

v = √ 2 a s

= √ (2 x  5 / 7  x  g sinθ s )

= √ (10/7  x  g h  )

Given

√ (10/7  x  g h  ) = √ 2g / 3

10/7  x  g h  = 2g / 3

h = 14 / 30 m

= .47 m .

Answer:

Sensitivity of biosensor

The biosensor showed good linear correlation in the wide detection range of 0.001–2000 ng/mL with good sensitivity. In addition, it retained its biosensing property for seven days with high reproducibility

Explanation:

Answer:25 N

Explanation:

in the case shown below, the 1 kg rock rides on a horizontal disk that rotates at constant speed 5m/s is 25N

Speed is the ratio of distance with respect to the time in which the distance was covered. Speed is a scalar quantity as it does not have magnitude only have direction

The formula of speed can be represented as s=d/t, Where, s is the speed in m.s-1, d is the distance traveled in m, t is the time taken in s

Uniform speed is defined when the object covers equal distance at equal time intervals, variable speed is defined as when the object covers a different distance at equal intervals of times.

Average speed is defined as the total distance travelled by an object to the total time taken by the object.

Instantaneous speed is defined as when the object is move with variable speed, then the speed at any instant of time is known as instantaneous speed.

For more details regarding speed, visit

brainly.com/question/13263542

#SPJ5

Answer:

a = 0m/s²

Explanation:

Average acceleration = (change in velocity)/(time it takes). Since the car's change in velocity is zero, its acceleration is zero.

Answer:

14.17H

Explanation:

Energy stored in an inductor is expressed as;

E = 1/2LI²

L is the inductance of the inductor

I is the current flowing through the inductor

Given

E = 10.2J

I = 1.20

Required

Inductance L

Substitute the given parameters into the formula;

10.2 = 1/2L(1.2)²

10.2 = 1/2*1.44L

10.2 = 0.72L

L = 10.2/0.72

L = 14.17H

Hence the self inductance of the solenoid is 14.17H

Answer:

6.94446 min

Explanation:

t=s/v

Answer:

d = 0.05 [m] = 50 [mm]

Explanation:

We must remember the principle of conservation of energy which tells us that energy is transformed from one way to another. For this case, the initial kinetic energy is transformed into useful work that is equal to the product of force by distance.

[tex]E_{k}=F*d\\400 = 8000*d\\d = 0.05 [m] = 50 [mm][/tex]

Answer:

Friction is when 2 solids move against each other. The cause of friction is adhesion, and surface roughness. Surface roughness is when a surface is rough enough that is causes friction against another surface. Adhesion is when 2 surfaces collide because of thier molecular force.

Explaining the concept:

To explain this, we first need to know what density actually is:

Density is the mass of a given substance per unit volume, which means, that is the amount of mass present in unit volume (1 cm³ , 1m³)

Impure water is water, but with impurities added to it

Why is the density of Impure water is greater:

When we compare the mass of equal volumes of Water and Impure water, we will find that the mass of Impure water will be more, that is because the extra mass is of the impurities

Since impure water has impurities uniformly spread in it, we will find more matter in unit volume of Impure water than in Pure water

That is why the density of Impure water is greater

Answer:

1.2 kg

__________________________________________________________

We are given:

Mass of the block = 2 kg

Coefficient of Static Friction = 0.6

__________________________________________________________

Friction Force on the Block:

Finding the Normal Force:

We know that the normal force will be equal and opposite to the weight of the 2 kg block

So, Normal Force = mg

replacing the variables with the given values

Normal Force = (2)(9.8)                    [Taking g = 9.8]

Normal Force = 19.6 N

Friction force on the Block:

We know that:

Coefficient of Static Friction =  Static Friction Force/Normal Force

replacing the variables

0.6 = Static Friction force / 19.6

Static Friction force = 0.6*19.6 N                 [Multiplying both sides by 19.6]

Static Friction force = 11.76 N

__________________________________________________________

Largest Mass that can Hang:

We know that the Static Friction force is 11.76 N, this means that a force of 11.76 N will be applied to keep the object at rest

So, if the weight of the second block is less than the static friction force, it will hang

Weight of the second block ≤ 11.76

We know that weight = mg

mg ≤ 11.76

m(9.8) ≤ 11.76                                                   [since g = 9.8]

m ≤ 1.2 kg                                                        [dividing both sides by 9.8]

From this, we can say that the maximum mass of the second block is 1.2 Kg

Answer:

true

Explanation:

A gene mutation is a permanent change in the DNA sequence of a gene. Mutations can occur in a single base pair or in a large segment of a chromosome and even span multiple genes. Mutations can result from endogenous (occurring during DNA replication) or exogenous (environmental) factors. Germline mutations occur in gametes. Somatic mutations occur in other body cells. Chromosomal alterations are mutations that change chromosome structure. Point mutations change a single nucleotide.

Two major categories of mutations are germline mutations and somatic mutations.

Germline mutations occur in gametes. These mutations are especially significant because they can be transmitted to offspring and every cell in the offspring will have the mutation.

Somatic mutations occur in other cells of the body.

Answer:

145

Explanation:

Answer:

O A. Freudian concepts

Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality. He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).

Explanation:

Hope this helped!

O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.

He thought that parenting is of primary importance to a child's development, and the family as the most important feature of nurture was a common theme throughout twentieth-century psychology (which was dominated by environmentalists theories).

One of the case studies most closely linked with the Austrian psychotherapist Sigmund Freud is the hysterics and treatment of Anna O.

Despite the fact that Freud is intimately identified with Anna O, it is thought that he never actually treated her; instead, Breuer saw the patient.

Therefore, O A. Freudian concepts. Freud (1905) stated that events in our childhood have a great influence on our adult lives, shaping our personality.

To learn more Psychology, refer to the link:

https://brainly.com/question/29436774

#SPJ5

Answer:

The displacement is 6.4m

Explanation:

Step one:

given

we are told that Lucy runs 4 meters to the east,

then 5 meters south.

let the distance east be the displacement in the x-direction, and south be the y-direction

Step two:

The resultant of the x and y displacement is the magnitude of the total displacement z

applying Pythagoras theorem we have

z=√x^2+y^2

z=√4^2+5^2

z=√16+25

z=√41

z=6.4m

Split up the forces into components acting parallel to and perpendicular to the slope. See the attached picture for the reference axes.

The box stays on the surface of the plane, so that the net force acting perpendicular to it is 0, and the only acceleration is applied in the parallel direction.

Let m be the mass of the box, θ the angle the plane makes with the ground, and a the acceleration of the box. By Newton's second law, we have

• net parallel force

∑ Force (//) = W (//) - F = m a

(that is, the net force in the parallel direction is the sum of the parallel component of the weight W and the friction F which acts in the negative direction)

• net perpendicular force

∑ Force (⟂) = W (⟂) + N = 0

Notice that

W (//) = W sin(θ) … … … which is positive since it points down the plane

W (⟂) = -W cos(θ) … … … which is negative since it points opposite the normal force N

So the equations become

W sin(θ) - F = m a

-W cos(θ) + N = 0

Solving for a gives

a = (W sin(θ) - F ) / m

which is good enough if you know the magnitude of the friction force.

If you don't, you can write F in terms of the coefficient of kinetic friction between the box and plane, µ, as

F = µ N

so that

a = (W sin(θ) - µ N ) / m

and the normal force itself has a magnitude of

N = W cos(θ)

so that

a = (W sin(θ) - µ W cos(θ) ) / m

The weight W has magnitude m g, where g is the magnitude of the acceleration due to gravity, so

a = (m g sin(θ) - µ m g cos(θ) ) / m

a = g (sin(θ) - µ cos(θ))

Answer:

Bobbie will need 12.7 seconds.

Explanation:

Constant Acceleration Motion

It's a type of motion in which the velocity of an object changes uniformly in time. If the speed changes from vo to vf in a time t, then the acceleration is:

[tex]\displaystyle a=\frac{v_f-v_o}{t}[/tex]

The question states Bobbie is riding on a skateboard down a hill, starting from vo=26 m/s with an acceleration of a=6\ m/s^2 until his speed is 102 m/s. We are required to find the time needed to create that change of velocity.

Solving for t:

[tex]\displaystyle t=\frac{v_f-v_o}{a}[/tex]

[tex]\displaystyle t=\frac{102-26}{6}=\frac{76}{6}[/tex]

t = 12.7 s

Bobbie will need 12.7 seconds.

Answer:

effects of gravity on the Moon and Earth

Explanation:       Newton found the Moon's inward acceleration in its orbit to be 0.0027 metre per second per second, the same as (1/60)2 of the acceleration of a falling object at the surface of Earth.

Answer:

Transparent or Translucent

Explanation:

Answer:

The ratio is  KE : TM  =  0.75

Explanation:

from the question we are told that

  The displacement of a mass on a spring in simple harmonic motion is A/2 from the equilibrium position

Generally the total mechanical  energy of the mass is mathematically represented as

        [tex]TM = \frac{1}{2} * k * A^2[/tex]

Here  k is the spring constant  ,  A is the total displacement of the  the mass  from maximum  compression to maximum extension of the spring

Generally this total mechanical energy is mathematically represented as

        [tex]TM = KE + PE[/tex]

=>     [tex]KE = TM - PE[/tex]

Here the potential  energy of the mass is mathematically represented as

     [tex]PE = \frac{1}{ 2} * k * [ x ]^2[/tex]

Here x is the displacement of the mass from maximum compression or extension of the spring to equilibrium position and the value is  

      [tex]x = \frac{A}{2}[/tex]

So

     [tex]PE = \frac{1}{ 2} * k * [ \frac{A}{2} ]^2[/tex]

So

      [tex]KE = \frac{1}{2} * k * A^2 - \frac{1}{2} * k * [\frac{A}{2} ]^2[/tex]

=>    [tex]KE = \frac{1}{2} * k * A^2 - \frac{1}{8} * k * A ^2[/tex]

=>    [tex]KE = 0.375 * k * A^2[/tex]

So the ratio of  [tex]KE : TM[/tex] is  mathematically represented as

       [tex]\frac{KE}{TM} = \frac{0.375 k A^2 }{0.5 k A^2}[/tex]

=>    [tex]\frac{KE}{TM} = 0.75[/tex]

Answer:

1.92 m/s2

Explanation:

Answer

I Think Its 150