Answer:
There are needed 375mL of the 2.0M BaCl₂ solution completing to 500mL with water.
Explanation:
We can find with the volume and concentration of the barium chloride the moles of BaCl₂ required. With the moles and the concentration of our stock solution we can know the volume of the 2.0M BaCl₂ solution required as follows:
Moles required:
0.500L * (1.50mol / L) = 0.750 moles BaCl₂
Volume stock solution:
0.750 moles BaCl₂ * (1L / 2.0mol) = 0.375L
There are needed 375mL of the 2.0M BaCl₂ solution completing to 500mL with water.Consider the following balanced equation:
2KCIO3(s) → 2KCl(s) + 302(g)
How many moles of O2 will be obtained by decomposing
3.50 moles of KCIO3?
0.530 mole
O 3.00 moles
O 2.30 moles
5.25 moles
5.25 moles
General Formulas and Concepts:Chemistry
Atomic Structure
CompoundsMolesAqueous Solutions
States of matterStoichiometry
Analyzing reactions RxNUsing Dimensional AnalysisExplanation:Step 1: Define
[RxN - Balanced] 2KClO₃ (s) → 2KCl (s) + 3O₂ (g)
[Given] 3.50 mol KClO₃
[Solve] mol O₂
Step 2: Identify Conversions
[RxN] 2 mol KClO₃ (s) → 3 mol O₂ (g)
Step 3: Stoichiometry
[DA] Set up conversion: [tex]\displaystyle 3.50 \ mol \ KClO_3(\frac{3 \ mol \ O_2}{2 \ mol \ KClO_3})[/tex][DA} Multiply [Cancel out units]: [tex]\displaystyle 5.25 \ mol \ O_2[/tex]How many molecules is 6.11 moles of Zn?
The answer is 0.015295197308045
We assume you are converting between moles Zinc and gram. You can view more details on each measurement unit: molecular weight of Zinc or grams The molecular formula for Zinc is Zn
The periodic table of the elements lists the elements in order of increasing atomic number. Each element has its own unique square in the periodic table. Numbers in an element's square are used to tell how many protons, neutrons and electrons a typical atom of each element has.
Based on the information shown, which is true about chlorine atoms?
Answer:
Every Chlorine atom has an atomic mass of 35.45u and 17 protons and electrons.
Explanation:
this can all be figured out looking at the atomic number in the top left corner and the mass is found at the bottom.
3. Define the following:
a. electromagnetic radiation
b. wavelength
c. frequency
d. quantum
e. photon
When dissolving a gas, an increase in pressure will result in a(n) ______________ in solubility.
13. Gas A and gas B (both unreactive) are allowed to mix. The total pressure is found to be 3.50 atm. f gas B
was measured initially at 1.25 atm, what is the partial pressure of gas A?
a 4.75 atm
b. -2.25 atm
c.) 2.25 atm
d 1.25 atm
The partial pressure inside a gas mixture shall consist of the notional pressure of that constituent gas if the whole quantity of its starting material alone was occupied at the same temperature. The partial gas pressure is a measure of thermodynamic action in the particles of a gas, and the calculation can be defined as follows:
Given:
[tex]\to \bold{ P_T=3.50 \ atm}\\\\\to \bold{P_B=1.25 \ atm}\\\\[/tex]
To find:
partial pressure=?
Solution:
Using formula: [tex]\bold{P_T=P_A+P_B}\\\\[/tex]
[tex]\to \bold{3.50=P_A+1.25}\\\\\to \bold{P_A=3.50-1.25}\\\\\to \bold{P_A=2.25}\\\\[/tex]
As we know that pressure is not negative and as [tex]\bold{P_T}[/tex] is total pressure so, it has a large value, and[tex]\bold{ P_A , P_B}[/tex] is partial.
Therefore, the final answer is "Option C".
Learn more:
brainly.com/question/1417176
What is the term for the limited recyclable life of certain materials? o single-stream recycling o closed-loop recycling O dual-stream recycling downcycling
Answer:
There are three main types of recycling: primary, secondary, and tertiary.Single-stream recycling is a system in which all recyclables, including newspaper, cardboard, plastic, aluminum, junk mail, etc., are placed in a single bin or cart for recycling. ... While collections costs are lower with a single stream system, processing costs are much higher.
Explanation:
Hope it helps u
FOLLOW MY ACCOUNT PLS PLS
someone help me answer this !
An electron is a positively charged particle inside of an atom, just like the proton.
True
False
Answer:
no it's is false because an electron have negative charges and it is not inside the atom and it is found out side the nucleus
The mass in grams of 2.6 x 10^22 chlorine atoms is
a.4.4
b.0.76
c.1.5
d.11
28. A runner completes a 10 km run in about 30 minutes. What was the runner's average
speed in km/h? Hint: (60 minutes = 1 hr)
a. 10 km/hr
c. 20 km/hr
b. 15 km/hr
d. 30 km/hr
Answer:
20 km/h
Explanation:
Speed = distance ÷ time
Speed = 10 ÷ 0.5 hours
Speed = 20 km/hr
When CuCl2 reacts with NaNO3, copper (II) nitrate and sodium chloride are formed.
a) Write the balanced equation for the reaction given above:
CuCl2 + NaNO3 à Cu(NO3)2 + NaCl
Answer:
CuCl2 + 2NaNO3 -------> Cu(NO3)2 + 2NaCl
hope this helps
good day mate
Sooner or later your new school won't feel so strange.get.
I'm hoping the same for my new coaching classes
This is my first time going out to study ngl-
find the oxidation number of hydrogen in HNC.
Answer:
+1
Explanation:
The oxidation number of Hydrogen atom is +1. As Nitrogen is more electronegative than Carbon, the oxidation number of Nitrogen is - 3. The Net charge on the compound is zero.
(hope that helps)
How does human consumption of limited resources (energy), impact the biosphere?
Human use of land has negative impacts. Human activities contribute to the erosion and pollution of beaches. Deforestation of land can also lead to desertification and a loss of biodiversity.
someone help me on these two 2
Answer:
Question 4 is- Solubility
Question 5 is- Suspension
Hopes this helps >:D
When we celebrate a new year we are really celebrating what?
Calculate the molarity of each aqueous solution with the given amount of Nacl58.44 and final volume. A .3.30 in 0.340L,6.00mol in 550ml,0.0160mol in 9.00ml
Answer:
For A: The molarity is the solution 9.706 M
For B: The molarity of the solution is 10.91 M.
For C: The molarity of the solution is 1.78 M.
Explanation:
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Number of moles of solute}}{\text{Volume of solution (L)}}[/tex] ......(1)
For A:
Number of moles = 3.30 moles
Volume of solution = 0.340 L
Plugging values in equation 1:
[tex]\text{Molarity of solution}=\frac{3.30 mol}{0.340 L}=9.706 mol/L[/tex]
For B:
Number of moles = 6.00 moles
Volume of solution = 550 mL = 0.550 L (Conversion factor: 1 L = 1000 mL)
Plugging values in equation 1:
[tex]\text{Molarity of solution}=\frac{6.00 mol}{0.550 L}=10.91 mol/L[/tex]
For C:
Number of moles = 0.0160 moles
Volume of solution = 9.00 mL = 0.009 L
Plugging values in equation 1:
[tex]\text{Molarity of solution}=\frac{0.0160 mol}{0.009 L}=1.78 mol/L[/tex]
PLEASE HELP ME ASAP!! I NEED IT! NO LINKS
Question: The cell shown in the picture has no nucleus, but can reproduce rapidly in the human body causing illness if left untreated. This cell is most like from which Domain?
Answer:
asexual cell
Explanation:there are mainly 2 types sexual and asexual i would say asexual because they grow without another parent and don't have a nucleus.
3. What is the density of a 100 grams (g) box that displaces 20 mL of water?
Answer: the density is 997 kg
Explanation:
3. A volume of gas at 1.65 atm was measured at 27°C and 343 mL. What will be the volume if the gas
is cooled to -12°C and the pressure is adjusted to 2.10 atm?
Answer:
Homework hint: P1V1 = nRT1 and V1, n, and R are constant. Remember to use Kelvin.
A weak base. B. has a K. of 4.46 x 10-10 A solution with an unknown initial concentration is tested, and found to have a pH of 8.39. Determine the initial concentration of B.
Answer:
0.013MB
Explanation:
True or False: Energy can be created.
А
True
B
False
Answer:
False
Explanation:
Scientifically, energy can never be created or destroyed. However it can be transfered. This law is called The Law of Conservation of Energy.
**EASY**
QUESTION IN PICTURE
Please , quick help! I know this but I can’t think of it when I need it if yk what i mean lol!
Which of these objects is made of cells?
A. rocks B. snow C. trees D. water
Answer:
I think it's trees
Explanation:
I'm not 100% sure tho
Which one of the following systems has the highest entropy?
10 mL of water at 100°C
10 mL of water at 50°C
10 mL of water at 10°C
Answer: a
Explanation:
The highest entropy will be 0 mL of water at 100°C.
What is entropy?Entropy is just a measured physical quality that will be most usually linked with disorder, unpredictability, or uncertainty.
The quantity of random movement in a system increases as more energy is put into it. Entropy rises like a volume increases in a system.
Therefore, the correct answer will be option 1.
To know more about entropy.
https://brainly.com/question/13146879
#SPJ2
The colision of two plates causes the fomation of _____
mountain
Complete the equation and indicate if a precipitate forms.
Li+(aq) + Br-(aq) + Pb2+(aq) + NO3-(aq) →
Answer:
Li⁺(aq) + 2Br⁻(aq) + Pb²⁺(aq) + NO₃⁻(aq) → PbBr₂(s) + NO₃⁻(aq) + Li⁺(aq)
A precipitate forms
Explanation:
To solve this question we must know the general solubility rules:
All group 1A (Li, Na, K...) and NH₄⁺ ions are always soluble.
The nitrates (NO₃⁻) and acetates are always solubles.
Cl⁻, Br⁻ and I⁻ are soluble except in the presence of Ag⁺, Pb²⁺, Cu⁺ and Hg₂²⁺
That means in the mixture of ions that we have, the Br⁻ will react with Pb²⁺ to produce PbBr₂(s):
Li⁺(aq) + 2Br⁻(aq) + Pb²⁺(aq) + NO₃⁻(aq) → PbBr₂(s) + NO₃⁻(aq) + Li⁺(aq)What does thermal energy refer to?
A. The chemical energy in reactions
B. The heat transferred between objects
C. The kinetic energy of particles within a system
D. The energy obtained from the sun
SUBMIT
Answer:
c
Explanation:
Thermal Energy has been the type of energy that refers to the kinetic energy of particles contained in a system. Hence, the correct option is (C).
What is thermal energy?
Thermal energy is the energy contained within a system as a result of its temperature. Thermodynamics, a branch of chemistry, states how heat is transmitted through multiple systems and how work is done in the process by the virtue of the first law of thermodynamics.
The thermal energy speeds the movement and collision of the particles present within the system. It is found in electric heat, geothermal, coals, etc. It is due to the kinetic energy that allows the movement of the particles.
Therefore, option C. the kinetic energy contained in the particles results in thermal energy.
Learn more about thermodynamics here:
https://brainly.com/question/1368306
#SPJ5
why is zinc more electropositive than iron?
Answer:
Zinc has more power although iron has a stong bond with metal
Explanation:
Brainliest answer?
Answer:
Zinc has more negative electrode reduction potential than iron. Zinc is more easily oxidized than iron, zinc has a lower reduction potential.
Explanation: