Answer:
Explanation:
A solution with a pH value of 7 is neutral i.e neither acidic nor alkaline. A solution with a pH less than 7 is said to be acidic, while one with a pH value more than 7 is alkaline. Acidity increases as the value decrease below 7, while alkalinity increases as the value increase about 7.
Given that H2A is a diprotic weak acid have pKa values of 5.0 ad 9.0, it will undergo dissociation in the solution as:
NOTE: These reactions are reversible reactions.
[tex]\mathbf{H_2A \to H^+ + HA^- \ \ \ pKa = 5.0}[/tex]
[tex]\mathbf{HA^- \to H^+ +A^{2-} \ \ \ pKa = 9.0}[/tex]
Thus;
The primary species is HA⁻
The secondary species is A²⁻
What calculated value is used to evaluate accuracy for a set of data? Group of answer choices (multiple choice) yield percent error range
Answer:
Percent error
Explanation:
Percent error is defined as the percentage of the difference between the measured( accurate value) and the known value of a substance.
It is usually calculated by:
Measured value — Known value/ known value * 100%
Percent error is the calculated value that is used to evaluate accuracy for a set of data
The atomic notation for a particular atom of boron is ' B. The
atomic number is while the mass number is
Answer:
5;11
Explanation:
Rearange the equation to isolate a. (a+b/c)(d-e)=f find a =
Answer:
[tex]a=\frac{f}{d-e}-\frac{b}{c}[/tex]
Explanation:
Hello.
In this case, for the equation:
[tex](a+b/c)(d-e)=f[/tex]
For isolating a, we must first pass (d-e) to divide at the other side as it is initially multiplying:
[tex]a+b/c=\frac{f}{(d-e)}[/tex]
Next, as b/c is adding, it passes to subtract at the other side in order to finally isolate a:
[tex]a=\frac{f}{d-e}-\frac{b}{c}[/tex]
Best regards!
Problem:
[Ar]4s2
Identify the period (p) , group (g) and valence electrons block of the element
Answer:
it is Calcium (Ca)
4th period, 2nd group, 2 valence electrons
Find the density of a liquid that has a mass of 24 grams and a volume of 6 ml.
Answer:
4
Explanation:
24/6 is 4.
Answer:
Mathematically: D = m/v. If you know what liquid you have, you can look up its density in a table. Once you know that, all you have to do to find the mass of the liquid is to measure its volume. Once you know density and volume, calculate mass using this relationship: mass = density • volume.
Explanation:
The escape velocity from Earth’s surface is 1.12*10^4 meters per second. At this speed, how many kilometers would a rocket travel in 3 minutes
Answer:
2016 Km.
Explanation:
The following data were obtained from the question:
Speed (S) = 1.12×10⁴ m/s
Time (t) = 3 mins
Distance (d) =.?
Next, we shall convert 3 mins to seconds. This can be obtained as follow:
1 min = 60 s
Therefore,
3 mins = 3 min × 60 s / 1 min
3 mins = 180 s
Next, we shall determine the distance travelled by the rocket. This is illustrated below:
Speed (S) = 1.12×10⁴ m/s
Time (t) = 180 s
Distance (d) =.?
Speed (S) = distance (d) /time (t)
S = d/t
1.12×10⁴ = d/ 180
Cross multiply
d = 1.12×10⁴ × 180
d = 2016000 m
Finally, we shall convert 2016000 m to Km. This can be obtained as shown below:
1000 m = 1 Km
Therefore,
2016000 m = 2016000 m × 1 Km / 1000 m
2016000 m = 2016 Km
Therefore, the rocket will travel 2016 Km in 3 mins
Prior to science lab, Maria had been drinking a can of soda. When she walked into the lab she set it down on the hot plate at her station. She heard a liquid beginning to boil, and realized that the previous students had forgotten to turn off the hotplate and the boiling noise was from the remaining soda in the can. Without thinking, she picked up the can with her bare hands, and put it upside down into the sink which was half full of liquid. Immediately the can crushed as though it was going to be recycled. What do you think is happening to the soda and air in the can? Support you claim in Question 4, by explaining why you think it is happening. Formulate your hypothesis for the problem. Critique Maria’s laboratory safety procedures.
Answer:
See explanation
Explanation:
When the temperature was increased, the pressure of the gas in the can was increased.
When Maria removed the can and placed it in cold liquid, the decrease in temperature led to a corresponding decrease in pressure of the gas inside the can hence the can was crushed.
Hypothesis: The pressure of the gas in the can is directly proportional to temperature.
Maria was careless about the experiment. She ought to have first checked whether the hot plate was off before placing the soda can. Secondly,she should not have immediately plunged the soda can into liquid because it will shrink due to decrease in pressure. She should not also have removed the soda can with bare hands to avoid getting burns and blisters.
An unknown compound contains only carbon, hydrogen, and oxygen (CxHyOz). Combustion of 5.50 g of this compound produced 8.07 g of carbon dioxide and 3.30 g of water.
Required:
a. How many moles of carbon, C, were in the original sample?
b. How many moles of hydrogen, H, were in the original sample?
Answer:
a. 0.183 mol C
b. 0.366 mol H
Explanation:
Assuming total combustion, all of the carbon in the unknown compound turned into carbon dioxide, CO₂.
So first we calculate the CO₂ moles produced, using its molecular weight:
8.07 g CO₂ ÷ 44 g/mol = 0.183 mol CO₂This means in the unknown compound there were 0.183 moles of carbon, C.
Conversely, all of the hydrogen in the unknown compound turned into water, H₂O.
Calculating the H₂O moles:
3.30 g ÷ 18 g/mol = 0.183 mol H₂OWe multiply the water moles by two, as there are 2 H moles per H₂O mol:
0.183 * 2 = 0.366 mol H.Which profile best shows the topography alone line AD
Cathode rays are deflected toward a negatively charged plate in an electric field.
True
False
Answer:
true. cathode rays are deflected
A student ran the following reaction in the laboratory at 751 K: N2(g) + 3H2(g) 2NH3(g) When she introduced 3.47×10-2 moles of N2(g) and 6.38×10-2 moles of H2(g) into a 1.00 liter container, she found the equilibrium concentration of H2(g) to be 6.25×10-2 M. Calculate the equilibrium constant, Kc, she obtained for this reaction.
Answer:
Kc = 4.86×10⁻⁶
Explanation:
We begin from the equation:
N₂ + 2H₂ ⇄ 2NH₃
We start from 3.47×10⁻² moles of N₂(g) and 6.38×10⁻² moles of H₂(g), so when we reach the equilibrium, we get 6.25×10⁻² moles of H₂.
This data means, that in the reaction we made react:
6.38×10⁻² - x = 6.25×10⁻²
x = 1.3×10⁻³ moles of H₂
As stoichiometry is 1:3, we will know that the moles of N₂ that have been reacted were:
1.3×10⁻³ moles / 3 = 4.33×10⁻⁴ moles of N₂
So, in the equilibrium we would have:
3.47×10⁻² moles of N₂ - 4.33×10⁻⁴ moles of N₂ = 0.0343 moles of N₂
How many ammonia, would we have in the equilibrium?
4.33×10⁻⁴ mol . 2 = 8.66×10⁻⁴ moles (from stoichiometry with N₂, 1:2)
(1.3×10⁻³ mol . 2) / 3 = 8.66×10⁻⁴ moles (from stoichiometry with H₂, 2:3)
Let's make the expression for Kc
Kc = [NH₃]³ / [N₂] . [H₂]²
(8.66×10⁻⁴ )³ / (0.0343 . (6.25×10⁻²)² = 4.86×10⁻⁶
Josh heated a certain amount of blue copper sulfate crystals to get 2.1 g of white copper sulfate powder and 1.4 g of water. What is most likely the mass of the blue copper sulfate that he heated and why?
Answer: The mass of blue copper sulfate is 3.5 g
Explanation:
Law of conservation of mass states that mass can neither be created nor be destroyed but it can only be transformed from one form to another form.
This also means that total mass on the reactant side must be equal to the total mass on the product side.
The chemical equation for the heating of copper sulfate crystals is:
Let the mass of blue copper sulfate be 'x' grams
We are given:
Mass of copper sulfate powder = 2.1 grams
Mass of water = 1.4 grams
Total mass on reactant side = x
Total mass on product side = (2.1 + 1.4) g
So, by applying law of conservation of mass, we get:
Hence, the mass of blue copper sulfate is 3.5 grams
What mass of water is produced from the complete combustion of 6.60×10−3 g of methane?
How many moles of H2 are needed to produce 24 moles of NH3?
Answer:
36 mol of H2
Explanation:
The balanced equation of the reaction is given as;
3H2 + N2 --> 2NH3
From the reaction;
It takes 3 mol of H2 reacting with 1 mol of N2 to form 2 mol of NH3
3 mol of H2 = 2 mol of NH3
x mol of H2 = 24 mol of NH3
x = (24 * 3) / 2 = 36 mol of H2
A certain chemical reaction releases of heat for each gram of reactant consumed. How can you calculate the heat produced by the consumption of of reactant? Set the math up. But don't do any of it. Just leave your answer as a math expression. Also, be sure your answer includes all the correct unit symbols.
Complete Question
The complete question is shown in the first uploaded image
Answer:
So the math expression is
[tex]heat = \frac{ 35. 7 KJ * 1900 \ gram }{ 1 \ gram }[/tex]
Explanation:
From the question we are told that
The heat released for 1 gram of reactant consumed is [tex]H = 37.5 \ KJ/g [/tex]
The mass of reactant considered is [tex]m = 1.9 \ kg = 1900 \ g[/tex]
So if
[tex]37.5 \ KJ [/tex] is produced for 1 gram
Then
x kJ is produced for 1900 g
=> [tex]x = \frac{ 35. 7 KJ * 1900 \ gram }{ 1 \ gram }[/tex]
So the heat released is
[tex]heat = \frac{ 35. 7 KJ * 1900 \ gram }{ 1 \ gram }[/tex]
Aluminum metal and bromine liquid (red) react violently to make aluminum bromide (white powder). One way to represent this equilibrium is:
Al(s) + 3/2 Br2(l)AlBr3(s)
We could also write this reaction three other ways, listed below. The equilibrium constants for all of the reactions are related. Write the equilibrium constant for each new reaction in terms of K, the equilibrium constant for the reaction above.
1) 2 AlBr3(s) 2 Al(s) + 3 Br2(l)
2) 2 Al(s) + 3 Br2(l) 2 AlBr3(s)
3) AlBr3(s) Al(s) + 3/2 Br2(l)
Answer:
Explanation:
Al(s) + 3/2 Br₂(l) = AlBr₃(s)
K = [ AlBr₃] / [ Al] [ Br₂]³/²
K² = [ AlBr₃]² / [ Al ] ² [ Br₂]³
2 AlBr₃ = 2 Al(s) + 3 Br₂(l) =
K₁ = [ Al ] ² [ Br₂]³ / [ AlBr₃]²
K₁ = ( 1 / K² ) = K⁻²
2 ) 2 Al(s) + 3 Br₂(l) = 2 AlBr₃(s)
K₂ = [ AlBr₃ ]² / [ Al ]² [ Br₂ ]³
K₂ = K²
3 )
AlBr₃(s) = Al(s) + 3/2 Br₂(l)
K₃ = [ Al ] [ Br₂ ] ³/² / [ AlBr₃ ]
= ( 1 / K ) = K⁻¹
Which of the following best describes the structure of a nucleic acid?
a
Carbon ring(s)
b
Globular or fibrous
c
Single or double helix
d
Hydrocarbon(s)
In the ionic compound KCL, which ion is the cation, and which is the anion? PLEASE HELP
Answer:
Potassium chloride, KCl , is an ionic compound formed by the electrostatic force of attraction that holds the potassium cations and the chlorine anions together
Explanation:
How are ecological islands different from geographical islands as described from the reading in the text?
Answer:
Ecological islands is just a terminology used, since it isn't surrounded by water like an actual island, instead, it's something isolated from other things, which is the same thing as an island in a way:
Island (geographical) - Land isolated from bigger "main" land masses by water.
Island (ecological) - Land which contains certain isolated features (habitat, plants, etc.).
Explanation:
An ecological island is an area of land, isolated by natural or artificial means from its surrounding land while geographical islands are a body of land surrounded by water.
What are ecological islands and geographical islands?An ecological island refers to an area of land which is not necessarily an actual island but isolated by natural or artificial means from the surrounding land. A natural micro-habitat exists on sich lands amidst a larger differing ecosystem.
In artificial ecological islands, all non-native species are eradicated, native species are reintroduced and nurtured, and the natural or artificial border is maintained to prevent the reintroduction of non-native species.
A geographical island is a body of land surrounded by water. Continents are also surrounded by water as they are so big but they are not considered islands. Islands may be categorized as either continental or oceanic.
There are so many islands in the lakes, oceans, and rivers around the world. They vary in climate, size, and the types of organisms that inhabit them.
Learn more about ecological islands, here:
https://brainly.com/question/28690125
#SPJ2
Which statement best describes the octet rule?
A. When an atom becomes an ion, it gains or loses electrons so that its valence shell holds eight electrons.
B. When an atom becomes an ion, it gains or loses protons so that its nucleus holds eight protons.
C. When an atom becomes an ion, it gains or loses eight electrons.
D. When an atom becomes an ion, it gains or loses eight neutrons.
Determine each type of reaction. 2 C 2 H 2 ( g ) + 5 O 2 ( g ) ⟶ 4 C O 2 ( g ) + 2 H 2 O ( l ) 2CX2HX2(g)+5OX2(g)⟶4COX2(g)+2HX2O(l) Choose... N H 4 N O 3 ( s ) ⟶ N 2 O ( g ) + 2 H 2 O ( l ) NHX4NOX3(s)⟶NX2O(g)+2HX2O(l) Choose... C O ( g ) + 2 H 2 ( g ) ⟶ C H 3 O H ( l ) CO(g)+2HX2(g)⟶CHX3OH(l) Choose... 2 F e ( s ) + 6 H C l ( a q ) ⟶ 2 F e C l 3 ( a q ) + 3 H 2 ( g ) 2Fe(s)+6HCl(aq)⟶2FeClX3(aq)+3HX2(g) Choose... C a C l 2 ( a q ) + N a 2 C O 3 ( a q ) ⟶ 2 N a C l ( a q ) + C a C O 3 ( s ) CaClX2(aq)+NaX2COX3(aq)⟶2NaCl(aq)+CaCOX3(s) Choose...
Answer:
2 C 2 H 2 ( g ) + 5 O 2 ( g ) ⟶ 4 C O 2 ( g ) + 2 H 2 O ( l )- combustion reaction
N H 4 N O 3 ( s ) ⟶ N 2 O ( g ) + 2 H 2 O ( l )- decomposition reaction
C O ( g ) + 2 H 2 ( g ) ⟶ C H 3 O H ( l ) - combination reaction
2 F e ( s ) + 6 H C l ( a q ) ⟶ 2 F e C l 3 ( a q ) + 3 H 2 ( g )- Redox reaction
C a C l 2 ( a q ) + N a 2 C O 3 ( a q ) ⟶ 2 N a C l ( a q ) + C a C O 3 ( s )- double displacement reaction
Explanation:
We can determine the type of reaction by considering the reactants and products.
Combustion is a reaction between a substance and oxygen which produces heat and light. The first reaction is the equation for the combustion of ethyne.
A decomposition reaction is one in which a single reactant breaks down to form products. The second reaction is the decomposition of ammonium nitrate.
A combination reaction is said to occur when two elements or compounds react to form a single product. The third reaction is the combination of carbon dioxide and methane to form methanol.
An oxidation-reduction reaction is a reaction in which there is a change in oxidation number of species from left to right of the chemical reaction equation. The fourth reaction is the oxidation of iron (0 to +3 state) and reduction of hydrogen (+1 to 0 state).
A double displacement reaction is a reaction in which ions exchange partners from left to right in the reaction equation. The fifth reaction is a double displacement reaction. Both Na^+ and Ca^2+ exchanged partners from left to right of the reaction equation.
Reactions are the formation of the products from the reactant. The types of reactions are combustion, decomposition, combination, Redox and double displacement.
What are the types of reactions?The reaction is a chemical change in the properties of the reactant that forms the products. It can be of various types based on the formation of the product.
The first reaction is combustion as the reactants react and use oxygen to form heat, carbon dioxide and water. The combustion reaction of ethyne can be shown as,
[tex]\rm 2 C _{2} H _{2} ( g ) + 5 O _{2} ( g ) \rightarrow 4 C O _{2} ( g ) + 2 H _{2} O ( l )[/tex]
The second reaction is decomposition in which a single reactant decomposes to form two or more products. The decomposition of ammonium nitrate can be shown as,
[tex]\rm N H _{4} N O _{3} ( s ) \rightarrow N _{2} O ( g ) + 2 H _{2} O ( l )[/tex]
The third reaction is a combination reaction in which two compound or elements combines to form one product. The combination reaction between carbon monoxide and hydrogen to form methanol can be shown as,
[tex]\rm C O ( g ) + 2 H _{2} ( g ) \rightarrow C H _{3} O H ( l )[/tex]
The fourth reaction is redox and includes the oxidation and the reduction of the species of the reaction. In the reaction, iron undergoes oxidation and hydrogen reduction. The redox reaction can be shown as,
[tex]\rm 2 F e ( s ) + 6 H C l ( a q ) \rightarrow 2 F e C l _{3} ( a q ) + 3 H _{2} ( g )[/tex]
The fifth reaction is a double displacement reaction in which the calcium and sodium interchange their position in the product formation. The reaction can be shown as,
[tex]\rm C a C l _{2} ( a q ) + N a _{2} C O _{3} ( a q ) \rightarrow 2 N a C l ( a q ) + C a C O _{3} ( s )[/tex]
Therefore, the type of reactions is 1. combustion, 2. decomposition, 3. combination, 4. redox and 5. double displacement.
Learn more about types of reactions here:
https://brainly.com/question/20927858
Carbonic acid, H2CO3, has two acidic hydrogens. A solution containing an unknown concentration of carbonic acid is titrated with potassium hydroxide. It requires 22.9 mL of 1.430 M KOH solution to titrate both acidic protons in 54.2 mL of the carbonic acid solution.
Required:
a. Write a balanced net ionic equation for the neutralization reaction. Include physical states.
b. Calculate the molarity of the carbonic acid solution.
Answer:
a. H₂CO₃(aq) + KOH(aq) ⇄ K₂CO₃(aq) + H₂O(l)
b. 0.603 M
Explanation:
Step 1: Write the neutralization reaction
H₂CO₃(aq) + KOH(aq) ⇄ K₂CO₃(aq) + H₂O(l)
Step 2: Calculate the reacting moles of KOH
22.9 mL of 1.430 M KOH react.
0.0229 L × (1.430 mol/L) = 0.0327 mol
Step 3: Calculate the reacting moles of H₂CO₃
The molar ratio of H₂CO₃ to KOH is 1:1. The reacting moles of H₂CO₃ are 1/1 × 0.0327 mol = 0.0327 mol.
Step 4: Calculate the molarity of H₂CO₃
0.0327 moles of H₂CO₃ are in a volume of 54.2 mL. The molarity of H₂CO₃ is:
M = 0.0327 mol/0.0542 L = 0.603 M
Which 2 main body systems work alongside the digestive system?
A gaseous mixture contains 441.0 Torr H2(g), 387.3 Torr N2(g), and 74.5 Torr Ar(g). Calculate the mole fraction, ????, of each of these gases.
????H2=
????N2=
????Ar=
Answer:
XH₂ = 0.4885
XN₂ = 0.4290
XAr = 0.0825
Explanation:
Step 1: Given data
Partial pressure of H₂ (pH₂): 441.0 TorrPartial pressure of N₂ (pN₂): 387.3 TorrPartial pressure of Ar (pAr): 74.5 TorrStep 2: Calculate the total pressure (P)
The total pressure is equal to the sum of the partial pressures of all the gases.
P = pH₂ + pN₂ + pAr = 441.0 Torr + 387.3 Torr + 74.5 Torr = 902.8 Torr
Step 3: Calculate the mole fraction (X) of each gas
We will use the following expression.
Xi = pi / P
where,
Xi: mole fraction of the gas i
pi: partial pressure of the gas i
P: total pressure
XH₂ = pH₂ / P = 441.0 Torr / 902.8 Torr = 0.4885
XN₂ = pN₂ / P = 387.3 Torr / 902.8 Torr = 0.4290
XAr = pAr / P = 74.5 Torr / 902.8 Torr = 0.0825
The molar mass of gallium (Ga) is 69.72 g/mol.
Calculate the number of atoms in a 27.2 mg sample of Ga.
Write your answer in scientific notation using three significant figures.
atoms Ga
Answer:
2.35 x 10²⁰ atoms Ga
Explanation:
After converting from mg to g, use the molar mass as the unit converter to convert to moles. Then using Avogadro's number, 6.022 x 10²³ convert from moles to atoms of Ga.
[tex]27.2mgGa*\frac{1g}{1000mg} *\frac{1 mol Ga}{69.72gGa} *\frac{6.022*10^2^3 atoms Ga}{1 molGa} = 2.349 * 10^2^0 atoms Ga[/tex]
Then round to 3 significant figures = 2.35 x 10²⁰ atoms Ga.
The number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms
StoichiometryFrom the question, we are to calculate the number of atoms in a 27.2 mg sample of Ga.
First, we will determine the number of moles of Ga present
Using the formula,
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass} [/tex]
Mass = 27.2 mg = 0.0272 g
Molar mass = 69.72 g/mol
Then,
[tex]Number\ of\ moles \ of\ Ga = \frac{0.0272}{69.72} [/tex]
[tex]Number\ of\ moles \ of\ Ga = [/tex] 0.000390132 moles
Now, for the number of atoms present
From the formula
Number of atoms = Number of moles × Avogadro's constant
Then,
Number of Ga atoms = 0.000390132 × 6.022×10²³
Number of Ga atoms = 2.35 × 10²⁰ atoms
Hence, the number of atoms in 27.2 mg sample of Ga is 2.35 × 10²⁰ atoms
Learn more on stoichiometry here: https://brainly.com/question/14464650
Which is the best molecule to build collegen, muscle repair, and tendon repair?
a
carohydrates
b
lipids
c
nucleic acids
d
Proteins
Answer:
d
Explanation:
collagen is made of proteins
Which of the following is an example of a chemical change that occurs in your home?
A) Water boiling on the stove
B) Composting your own fertilizer
C) Smashing a window with a baseball
D) Adding food coloring to icing for a cake
Potassium hydrogen phthalate is a solid, monoprotic acid frequently used in the laboratory to standardize strong base solutions. It has the unwieldy formula of KHC8H4O4. This is often written in shorthand notation as KHP.
Required:
How many grams of KHP are needed to exactly neutralize 25.6 mL of a 0.527 M potassium hydroxide solution?
Answer:
2.75 g
Explanation:
The number of moles of KOH is obtained from the equation;
n=CV
C= concentration
V= volume of solution
n= 0.527 × 25.6/1000
n= 0.0135
Reaction equation;
KOH(aq) + KHC8H4O4(aq) --->(KC8H4O4)K(aq) + H2O(l)
1 mole of KHP reacts with 1 mole of KOH
Hence; 0.0135 moles of KHP reacts with 0.0135 moles of KOH
From;
Number of moles = reacting mass/molar mass
Reacting mass = 0.0135 × 204
= 2.75 g of KHP
Which is the best surface for absorbing heat radiation? ☆ Shiny white Shiny black Dull black Dull white
Dull black surface are good absorbers of radiation.
Thermal radiationThe process by which energy in the form of electromagnetic radiation is emitted by a heated surface and travels directly to its absorption point at the speed of light.
The rate at which a body absorbs or radiates thermal radiation relies upon the nature of the surface as well.
According to the Kirchhoff's radiation law, the objects, which are good emitters are also good absorbers.
A blackened surface is an excellent absorber as well as an excellent emitter.
A black body refers to a body, which is regarded as a perfect radiator and absorber of electromagnetic radiations, a dull black surface is a good absorber of heat radiation.
Thus, dull black surface is the best surface for absorbing heat radiation.
Find out more information about thermal radiation here:
https://brainly.com/question/12072129
What color is the acetic acid plus methyl orange solution and what does this tell you about where the equilibrium is
Answer:
Red
Explanation:
Acetic acid is an acidic medium. Recall that indicators are organic substances whose color changes in response to change in the pH of the solution. often times, the protonated and deprotonated forms of an indicator have different colors.
However, an equilibrium is set up when an indicator is in acid/ basic medium. Methyl orange is red in acid medium and yellow in basic medium.
Hence while in acetic acid, the equilibrium lies towards the protonated form of acetic acid, hence the solution appears red.