YOU MUST SHOW YOUR WORK FOR FULL CREDIT!
1. Jimmy picks up a 5kg box and places it on a shelf 1 meter from the ground. What is the
gravitational potential energy of the box?

Answer:

Unlike a permanent magnet, an electromagnet can be turned on and off using electrical current. Many variables affect the strength of this electromagnet, and there are some variables that do not affect the strength. ... Making the nail longer will not make the magnet stronger, unless you also add more turns to the coil.

electromagnet can be turned on and off using electrical current. Many variables affect the strength of this electromagnet, and there are some variables that do not affect the strength

Answer:

Yes, in both cases the reactant bond must be broken before the H can bond.

Explanation:

Let us remind ourselves of the basics of the collision theory. According to this theory, chemical reaction occurs because of the collision of particles of substances in a chemical reaction system.

This means that the bond between reactants must first be broken and new bonds formed in products. Activation energy is the minimum energy required for a reaction to occur. This energy goes into the rearrangement of reactant bonds to enable them to recombine and form products.

Since the N2 bond energy is far higher than the I2 bond energy, a greater degree of energy is needed overcome the energy barrier in the reaction of H2 with N2 compared to the reaction of H2 and I2 . Therefore, the activation energy for the reaction of H2 and N2 is much higher than the activation energy for the reaction of H2 with I2.

Answer:

116.78 grams.

Explanation:

1 mol of Strontium (Sr) = 87.62 grams

1.38 mol of Strontium = x

Cross Multiply

1 * x = 1.38 * 87.62

x = 116.78  grams

Answer:

A) 2

Explanation:

Answer:

2, i got it right thanks to the other user :) <3

Explanation:

Answer:

M =  0.125 M

Explanation:

Given data:

Molarity = ?

Volume of solution = 2 L

Mass of K₂SO₄ = 43.55 g

Solution;

Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.

Formula:

Molarity = number of moles of solute / L of solution

Number of moles of solute:

Number of moles = mass/molar mass

Number of moles = 43.55 g / 174.26 g/mol

Number of moles = 0.25 mol

Molarity:

M =  0.25 mol / 2 L

M =  0.125 M

The lethal dose and how ounces of soda in a can of soda is not given, however, the standard lethal dose and volume of soda are given as below:

Lethal dose: 10 gm of caffeine

The volume of soda per can =  12oz/can

Answer:

The correct answer is - 324.254 cans or round up to 325 cans. Ans.

Explanation:

Given:

2.57 mg caffeine / 1oz

12oz / 1can

Lethal dose: 10.0g or 10,000mg of caffeine

Solution:

Caffeine per soda can = (2.57 mg caffeine / 1oz) * (12oz / 1can) = 30.84 mg caffeine / 1can.

lethal dose would be in =

(10,000mg caffeine) * (1can / 30.84 mg caffeine) = 324.254 cans or round up to 325 cans. Ans.

Answer:

False

Explanation:

Chemists make a distinction between two different types of changes that they study—physical changes and chemical changes. Physical changes are changes that do not alter the identity of a substance. Chemical changes are frequently harder to reverse than physical changes.

Answer:

C₁₇H₂₀N₄O₆

Explanation:

First, we need to determine the percentage of the atoms in the molecule. Then, assuming a basis of 100 we must convert the mass of each atom to moles. Simplest formula is the simplest ratio of atoms presents in the molecule:

%C:

19.88g CO2 * (12.01g/mol C / 44.01g/mol CO2) = 5.425g C

5.425g C / 10.0g * 100 = 54.25% C

%H:

4.79g H2O * (2*1.01g/mol / 18.015g/mol) = 0.537g H

0.537g H / 10.0g * 100 = 5.37%

%N:

14.89%

%O:

100 - 14.89% - 54.25% - 5.37% = 25.49%

Moles of each atom in a basis of 100g:

C: 54.25g * (1mol / 12.01g) = 4.517moles

H: 5.37g * (1mol / 1.01g) = 5.317 moles

N: 14.89g * (1mol / 14.01g) = 1.063 moles

O: 25.49g * (1mol / 16g) = 1.593 moles

Dividing each amount of moles in the lower number of moles (moles N):

C = 4.517mol / 1.063mol = 4.25

H = 5.317mol / 1.063mol = 5

N = 1.063mol / 1.063mol = 1

O = 1.593mol / 1.063mol = 1.5

This ratio multiplied 4 times to obtain whole-numbers:

C = 4.25*4 = 17

H = 5*4 = 20

N = 1*4 = 4

O = 1.5*4 = 6

The simplest formula for vitamin B6 is:

Answer: Percent recovery is 47.34 %

Explanation:

Percent yield is defined as the ratio of experimental yiled to theoretical yield in terms of percentage.

[tex]{\text{ percent yield}}=\frac{\text{amount recovered}}{\text{total amount}}\times 100[/tex]

Putting in the values we get:

[tex]{\text{ percent yield}}=\frac{0.732}{1.546}\times 100=47.34\%[/tex]

Therefore, the percent recovery is 47.34 %

Answer:

The sun will appear to rise and set more slowly

have a nice day! (^o^)

Answer:

Explanation:

To find the concentration; let's first compute the average density and the average atomic weight.

For the average density [tex]\rho_{avg}[/tex]; we have:

[tex]\rho_{avg} = \dfrac{100}{ \dfrac{C_{Fe} }{\rho_{Fe}} + \dfrac{C_v}{\rho_v} }[/tex]

The average atomic weight is:

[tex]A_{avg} = \dfrac{100}{ \dfrac{C_{Fe} }{A_{Fe}} + \dfrac{C_v}{A_v} }[/tex]

So; in terms of vanadium, the Concentration of iron is:

[tex]C_{Fe} = 100 - C_v[/tex]

From a unit cell volume [tex]V_c[/tex]

[tex]V_c = \dfrac{n A_{avc}}{\rho_{avc} N_A}[/tex]

where;

[tex]N_A[/tex] = number of Avogadro constant.

SO; replacing [tex]V_c[/tex] with [tex]a^3[/tex] ; [tex]\rho_{avg}[/tex] with [tex]\dfrac{100}{ \dfrac{C_{Fe} }{\rho_{Fe}} + \dfrac{C_v}{\rho_v} }[/tex] ; [tex]A_{avg}[/tex] with [tex]\dfrac{100}{ \dfrac{C_{Fe} }{A_{Fe}} + \dfrac{C_v}{A_v} }[/tex] and

[tex]C_{Fe}[/tex] with [tex]100-C_v[/tex]

Then:

[tex]a^3 = \dfrac { n \Big (\dfrac{100}{[(100-C_v)/A_{Fe} ] + [C_v/A_v]} \Big) } {N_A\Big (\dfrac{100}{[(100-C_v)/\rho_{Fe} ] + [C_v/\rho_v]} \Big) }[/tex]

[tex]a^3 = \dfrac { n \Big (\dfrac{100 \times A_{Fe} \times A_v}{[(100-C_v)A_{v} ] + [C_v/A_Fe]} \Big) } {N_A \Big (\dfrac{100 \times \rho_{Fe} \times \rho_v }{[(100-C_v)/\rho_{v} ] + [C_v \rho_{Fe}]} \Big) }[/tex]

[tex]a^3 = \dfrac { n \Big (\dfrac{100 \times A_{Fe} \times A_v}{[(100A_{v}-C_vA_{v}) ] + [C_vA_Fe]} \Big) } {N_A \Big (\dfrac{100 \times \rho_{Fe} \times \rho_v }{[(100\rho_{v} - C_v \rho_{v}) ] + [C_v \rho_{Fe}]} \Big) }[/tex]

Replacing the values; we have:

[tex](0.289 \times 10^{-7} \ cm)^3 = \dfrac{2 \ atoms/unit \ cell}{6.023 \times 10^{23}} \dfrac{ \dfrac{100 (50.94 \g/mol) (55.84(g/mol)} { 100(50.94 \ g/mol) - C_v(50.94 \ g/mol) + C_v (55.84 \ g/mol) } }{ \dfrac{100 (7.84 \ g/cm^3) (6.0 \ g/cm^3 } { 100(6.0 \ g/cm^3) - C_v(6.0 \ g/cm^3) + C_v (7.84 \ g/cm^3) } }[/tex]

[tex]2.41 \times 10^{-23} = \dfrac{2}{6.023 \times 10^{23} } \dfrac{ \dfrac{100 *50*55.84}{100*50.94 -50.94 C_v +55.84 C_v} }{\dfrac{100 * 7.84 *6}{600-6C_v +7.84 C_v} }[/tex]

[tex]2.41 \times 10^{-23} (\dfrac{4704}{600+1.84 C_v})=3.2 \times 10^{-24} ( \dfrac{284448.96}{5094 +4.9 C_v})[/tex]

[tex]\mathbf{C_v = 9.1 \ wt\%}[/tex]

Answer:

thermal conductors

steel

polystyrene

thermal insulator

between things of the same temp?

sorry to ask but if its ok with you, may i get brainly, i need to rank up all i need is two more, if not its fine. thank you and yours truly golden

Answer:

its C

Explanation:

1/74.44 * 79.75 = 1.07

The molarity (mol/L) of NaClO in the bleach, given the data is 1.07 mol/L (Option C)

Molarity is defined as the mole of solute per unit litre of solution. Mathematically, it can be expressed as:

Molarity = mole / Volume

Mass of solute = percent × mass of solution

Mass of NaClO = 7.25% × 1100

Mass of NaClO = 0.0725 × 1100

Mass of NaClO = 79.75 g

Mole = mass / molar mass

Mole of NaClO = 79.75 / 74.44

Mole of NaClO = 1.07 mole

Molarity = mole / Volume

Molarity of NaClO = 1.07 / 1

Molarity of NaClO = 1.07 mol/L

Learn more about molarity:

https://brainly.com/question/9468209

#SPJ6

Answer:

257 mL

Explanation:

Step 1: Given data

Step 2: Calculate the moles (n) corresponding to 32.8 g of HCl

The molar mass of HCl is 36.46 g/mol.

32.8 g × 1 mol/36.46 g = 0.900 mol

Step 3: Calculate the volume (V) of solution required

We will use the following expression.

C = n/V

V = n/C

V = 0.900 mol/(3.50 mol/L)

V = 0.257 L = 257 mL

Answer:

1.51×10²³ atoms.

Explanation:

From the question given above, the following data were obtained:

Mass of Calcium (Ca = 10 g

Number of atom of Calcium (Ca) =?

The number of atoms present in 10 g of Ca be obtained as follow:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms. This implies that 1 mole Ca contains 6.02×10²³ atoms.

1 mole of Ca = 40 g.

Now, if 40 g of Ca contains 6.02×10²³ atoms.

Therefore, 10 g of Ca will contain = (10 × 6.02×10²³) / 40 = 1.51×10²³ atoms.

Thus, 10 g of calcium contains 1.51×10²³ atoms.

Answer:

K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷

Explanation:

The equation for the reaction is given below:

7CH₄(g) + 8N₂(g) +2O₂(g) + 17H₂O(g) + 7K₂CO₃(s) —> 16NH₃(g) + 14KHCO₃(s)

Equilibrium constant (K) =..?

Equilibrium constant, K for a reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Thus, the equilibrium expression for the Harber-Bosch process for the synthesis of ammonia can be written as shown below:

K = [NH₃]¹⁶ [KHCO₃]¹⁴ / [CH₄]⁷ [N₂]⁸ [O₂]² [H₂O]¹⁷ [K₂CO₃]⁷

Answer:

In advance

middle

lower

Explanation:

These are the safety precautions needed when carrying out duties in the fume hood.

When planning and preparing to work in a fume hood (a locally designed area to reduce exposure to hazardous fumes). It is advisable to make all equipment readily available at your disposal in advance to reduce and minimize the raising and lowering of the hood sash at intervals.

It is also pertinent to understand that working in the middle of the work surface helps to promote the movement of air and keeps the area neat and tidy.

However, if any case where there is a need to get a new tool or equipment during the process of working in a fume hood, it is advisable to lower the sash at that point in time.

Answer:

25 mM Tris HCl and 0.1% w/v SDS

Explanation:

A 10X solution is ten times more concentrated than a 1X solution. The stock solution is generally more concentrated (10X) and for its use, a dilution is required. Thus, to prepare a buffer 1X from a 10X buffer, you have to perform a dilution in a factor of 10 (1 volume of 10X solution is taken and mixed with 9 volumes of water). In consequence, all the concentrations of the components are diluted 10 times. To calculate the final concentration of each component in the 1X solution, we simply divide the concentration into 10:

(250 mM Tris HCl)/10 = 25 mM Tris HCl

(1.92 M glycine)/10 = 0.192 M glycine

(1% w/v SDS)/10 = 0.1% w/v SDS

Therefore the final concentrations of Tris and SDS are 25 mM and 0.1% w/v, respectively.

Answer:

predator

Explanation:

Wolves, arctic foxes, and snowy owls are predators in the tundra.

Answer:

color

Explanation:

Answer:

D

Explanation:

The five conditions of chemical change: color chage, formation of a precipitate, formation of a gas, odor change, temperature change and the others are just physical changes that would happen if you change containers, or let it evaporate.

Answer and Explanation:

Yes. The determination of melting point is used to analyze if a solid compound is pure or impure. The melting point of a pure solid product does not vary in a narrow range, whereas if impurities are present the solid melts in a broad range of temperatures. For this reason, this technique is generally used to determine the identity and purity of the products obtained in chemical reactions.

Answer:

B. The same exact

Explanation:

I think B because in order to be a clone of your parent you have to have the exact same DNA and chromosomes.

Hope this helps :D

A clone has the same exact chromosomes as its parent.

CLONING:

Learn more at: https://brainly.com/question/12483409?referrer=searchResults

Answer:

The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.

Explanation:

Answer: The density of this nugget is [tex]7\text{ g cm}^{-3}[/tex] .

Explanation:

We are given that,

Mass of nugget = 63 g

Volume = [tex]9\ cm^3[/tex]

The computation of density of a substance is given by :-

[tex]\text{Density}=\dfrac{\text{Mass}}{\text{Volume}}\\\\\Rightarrow\ \text{Density}=\dfrac{63}{9}\text{ g cm}^{-3}[/tex]

[tex]\Rightarrow\ \text{Density =}7\text{ g cm}^{-3}[/tex]

Therefore, the density of this nugget is [tex]7\text{ g cm}^{-3}[/tex] .

Answer:

Their must be a picture with this question so we can answer it

Explanation:

According to octet rule  the bonded valence shells are completely filled. All the compounds except the first one, CH₃CH₃O is invalid since H does not obey the rule and invalid.

Octet rule says that an atoms become stable when it completes its valence shell to 8 electrons or 2 electrons for K-shell. Thus bonded shells have to completely filled to be stable.

Each atom shares its electrons based on its valency. For example carbon have a valency of 4 and it forms for bonds and oxygen and sulfur have two and hydrogen forms only one bonds.

In the first compounds CH₃CH₃O, where one H forms two bonds which is not possible and invalid.

In the second compound CONH, all the atoms satisfies its valency including nitrogen having a valency of three forms  three bonds. Similarly in CH₂F₂, one fluorine forms one bond and the structure is valid.

In the case of Br₂ , each bromine shares one electron with the other and complete their octet to eight electrons. In NH₃, SCO and COCl₂ all the atoms satisfies their valency and the structures are valid.

Therefore the only invalid structure is first compound, remaining all are valid.

To find more about octet rule, refer the link below:

https://brainly.com/question/11657564

#SPJ2

Your question is incomplete. But most probably your complete question was as in the uploaded image.

Answer:

1000 kJ.mmole / 1000 J.mole

Explanation:

To solve this, we need to analyze the given data.

We have a number which is 87.1 J/mmole.C (I'm assuming it has the J at the beggining because if not, then you are missing some data) and the final result is kJ/mol.C

The only unit that has not changed in the process was the °C, while the mole and J change respectively. In this case, we need to know the conversion factor of mmole to mole and J to kJ.

In the case of a mole:

1 mole --------> 1000 mmole

In the case of Joule:

1 kJ ----------> 1000 J

So the first thing we will do is to change from J to kJ:

87.1 J * 1 kJ / 1000 J = 0.0871 kJ

Now let's convert mmol to mole:

0.0871 kJ/mmole.C * 1000 mmole / 1 mole = 87.1 kJ/mole.C

As you can see, there's is practicly no change at all with the units, so putting all together it would be:

Hope this helps